SOW - Crane.pdf
PDF 96 KB Posted
- Attached to
- LAND MOBILE CRANE & OPERATOR
- Solicitation number
- FA441826Q0045
About this file
Summary
This Statement of Work specifies requirements for a land mobile crane and operator service at Joint Base Charleston – Naval Weapon Station in Goose Creek, South Carolina, with performance expected in April 2026. The Contractor must provide all labor, equipment, transportation, management, and supervision necessary to off-load vessel cargo, including a 250-ton capacity mobile crane, an NCCCO-certified crane operator, and rigger(s) for crane setup only. The crane must comply with OSHA 1926 subpart CC, OSHA 1926.1412(f), and ASME B30.5 standards, with slings and lifting devices meeting ASME B30.9 and B30.20 standards. Equipment specifications include a lifting capability of 250 tons, maximum diagonal lifting lug measurement of 10.70 meters (35'2"), lifting points ranging from +34' to -20', maximum lift distance of 70 feet, and maximum cargo weight of 78,000 pounds.
Upon 24-hour notification, the Contractor must deliver and pre-position the crane at the designated location for a minimum of 4 calendar days. Following a separate 24-hour notification, the Contractor will provide the crane operator and personnel to perform off-loading operations expected to last 8 hours, excluding travel time. The crane must be capable of lifting vessel cargo to a minimum clearance height of 5 feet above the vessel. All Contractor personnel requiring access to Joint Base Charleston must complete applicable background checks to receive contractor passes or badges. The Government will provide a 20-foot Tandemloc Autoloc Spreader and will supply spotters during off-load operations.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SCA WD 2015-4427.pdf | ||
| Solicitation - FA441826Q0045.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
LAND MOBILE CRANE & OPERATOR
Joint Base Charleston – Naval Weapon Station, SC
April 2026
Performance Work Statement (PWS): The Contractor shall provide all labor, equipment, transportation, management, and supervision required to provide a land mobile crane, operator, and rigger(s) to assist off-loading vessel cargo at Joint Base Charleston – Naval Weapon Station, Goose Creek
SC.
The Crane Operator shall be National Commission for the Certification of Crane Operators (NCCCO) certified or equivalent for the size and type crane to be operated.
The Contractor shall provide a land mobile crane with current inspection and/or in adherence to OSHA 1926 subpart CC, OSHA 1926.1412(f) and ASME B30.5. Slings and/or below the hook lifting devices if utilized shall adhere to ASME B30.9 and/or ASME B30.20 and shall be inclusive of the crane, counterweights, operator, rigger(s) needed for crane set up only. Government will furnish rigger(s). All required equipment shall meet the following requirements:
Lifting Capability – 250 tons Maximum Diagonal Lifting Lug Measurement - 10.70 meters (35’2”) Highest Beginning Lifting Point – +34’ Lowest Beginning Lifting Point – -20’ Vessel Height – 6.04 meters (20’) Vessel Width – 16.50 meters (54’) Vessel Length – 103.90 meters (341’) Maximum Lift Distance - 70’ Maximum Cargo Weight – 78,000lbs
The Contractor provided crane must be capable of lifting vessel cargo to a minimum clearance height of ___5’____ above the vessel.
Upon 24-hour notification to the Contractor, the Government will require delivery and pre-positioning of the crane and all necessary equipment at the designated location. The crane shall remain at the designated location for a minimum of 4 calendar days. Upon a separate 24-hour notification, the Contractor will provide the crane operator and personnel to perform off-loading requirements. Off-loading performance is expected to be 8 hours in duration, not to include travel to the designated location.
Contractor personnel requiring access to JB CHS shall submit to all applicable background checks prior to receiving a contractor’s pass/badge to accomplish work or enter the installation.
The government will provide a 20’ Tandemloc Autoloc Spreader. The government will also perform spotters during off-load operations.
File details come from the government source that posted it. Updated .