SOW CGC ROLLIN FRITCH.pdf

SCOPE OF WORK

FOR

PROVIDE CORROSION CORRECTION TREATMENT AND PREVENTITIVE

COATING ON VARIOUS ALUMINMUM HARDWARE

QUOTE #2588

ONBOARD

COAST GUARD CUTTER ROLLIN FRITCH

1 Munro Ave

CAPE MAY, NJ 08204

June 2021

US Coast Guard Cutter Rollin Fritch QUOTE No. 2588 Corrosion Correction Treatment and Preventative Coating

TABLE OF CONTENTS

DIVISION 1 - GENERAL REQUIREMENTS

011000 SUMMARY OF WORK

END OF CONTENTS

TABLE OF CONTENTS TOC-1 / 1

SUMMARY 011000 - 1 / 6

SECTION 011000 - SUMMARY

PART 1 - GENERAL

1.1 SUMMARY

A. Section Includes:

1. Project information.

2. Work covered by contract documents.

3. Phased construction.

4. Work by Government.

5. Access to site.

6. Coordination with occupants.

7. Work restrictions.

8. Safety precautions.

9. Site maintenance.

1.2 PROJECT INFORMATION

A. Project Identification: Provide Corrosion Correction Treatment and Preventative Coating on Various Aluminum Hardware.

1. Project Location: Onboard Coast Guard Cutter Rollin Fritch, TAMPA SHIP LLC, 1130 McClosky BLVD, Tampa, Florida 33605.

1.3 SCOPE OF WORK COVERED BY CONTRACT DOCUMENTS

A. The work of project is defined by the contract documents and consists of the following:

1. In general, the project consists of all work, including labor, equipment and materials, necessary to remediate corrosion on several pieces of aluminum hardware on the Coast Guard Cutter Rollin Fritch. This includes the following:

a. Front Awning Aluminum Frame

b. Rear Awning Aluminum Frame

c. Tow Bitt

d. (2) Shore Tie Boxes

SUMMARY 011000 - 2 / 6

e. Winch Controller Box

f. Ship’s Bell

1.4 WORK SEQUENCE

A. The work shall be conducted by the contractor to provide the least possible interference to the activities of government personnel.

B. Please provide notification to Coast Guard at least one full week prior to starting work.

1.5 WORK BY GOVERNMENT

A. General: Cooperate fully with Government so work may be carried out smoothly, without interfering with or delaying work under this contract or work by Government.

Coordinate the work of this contract with work performed by Government. Contractor shall cooperate fully with other contractors that may also be working in the area or onboard the CGC ROLLIN FRITCH.

1.6 ACCESS TO SITE

A. General: During the project period the contractor shall have limited use of project site for construction operations as indicated on drawings, as indicated by requirements of this Section, and as specified by the Contracting Officer.

1. Material storage and work areas shall be as designated by the Contracting Officer’s

Representative (COR). The COR shall be the contractors main POC for the work contained in this project. The COR for this project shall be: a. BMC Troy Fuller

a. CGC ROLLIN FRITCH

Email: Troy.G.Fuller@uscg.mil Phone: (619) 206-5062

1.7 WORK RESTRICTIONS

A. Work Restrictions, General: Comply with restrictions on construction operations.

1. Comply with limitations on use of public streets and with other requirements of authorities having jurisdiction.

B. On-Site Work Hours: Limit work in the existing building to normal business working hours of 7:00 a.m. to 4:00 p.m., Monday through Friday, unless otherwise indicated.

SUMMARY 011000 - 3 / 6

1. Submit request to the COR at least 72 hours in advance for permission to work outside the normal working hours or on Saturdays, Sundays, or federal holidays.

C. Take action to prevent the spread of construction dust and debris.

1.8 SITE MAINTENANCE

A. The contractor shall perform daily clean-up of work site, dumpsters and storage area. All dumpsters shall be covered and watertight should a contractor choose to utilize one.

1.9 ALUMINUM CLEANING AND REPAIR

A. Awning Frame

1. Tampa Ship LLC will remove and store canvas canopy cover from the aluminum frame prior to the start of work. Contractor shall clean, polish and sand as necessary to remove corrosion from awnings aluminum frame. Once complete contractor shall coat awning structure in a clear polymer ceramic coating which provides anti-corrosion, anti-rust, and UV protection for the metal. Contractor shall apply coating per manufacturer’s instructions. Once Completed Contractor will Re-Tie Front and Rear Canvas. See below for pictures:

SUMMARY 011000 - 4 / 6

B. Aluminum Tow Bitt

1. Contractor shall clean, polish and sand as necessary to remove corrosion from tow bitt’s aluminum surface. Once complete contractor shall coat bitt in a clear polymer ceramic coating which provides anti-corrosion, anti-rust, and UV protection for the metal. Contractor shall apply coating per manufacturer’s instructions. See below for pictures:

SUMMARY 011000 - 5 / 6

C. Electrical Shore Tie Boxes

1. Contractor shall clean, polish and sand as necessary to remove corrosion from two (2) electrical shore tie boxes. Once complete contractor shall coat these box covers in a clear polymer ceramic coating which provides anti-corrosion, antirust, and UV protection for the metal. Contractor shall apply coating per manufacturer’s instructions. See below for pictures:

D. Winch Controller Box

1. Contractor shall clean, polish and sand as necessary to remove corrosion from the ships winch controller box. Once complete contractor shall coat the box in a clear polymer ceramic coating which provides anti-corrosion, anti-rust, and UV protection for the metal. Contractor shall apply coating per manufacturer’s instructions. See below for picture:

SUMMARY 011000 - 6 / 6

E. Ships Bell

1. Contractor shall clean, polish and sand as necessary to remove corrosion from the ships bell. Once complete contractor shall coat the bell in a clear polymer ceramic coating which provides anti-corrosion, anti-rust, and UV protection for the metal. Contractor shall apply coating per manufacturer’s instructions.

PART 2 - The metal on the boat that is susceptible to rust or corrosion. SB-230 needs to be professionally applied for Anti-Corrosion, Anti-Rust, and Reduced Maintenance with ultimate UV Protection. Which is needed for our metals exposed to the marine environment elements.

PART 3 - EXECUTION (Not Used)

END OF SECTION 011000