SOW CEKT179200 20220921.pdf

STATEMENT OF WORK

Bradley Air National Guard Base CEKT179200 Construct Composite ASE/VMXS 21 September 2022

1. LOCATION. Bradley Air National Guard Base, 161 Rainbow Rd., East Granby, CT 06026.

Operating hours are between 7:00 a.m. through 4:30 p.m., Monday through Friday.

2. PURPOSE. The purpose of this Statement of Work is the execution of constructing a Composite Aircraft Support Equipment (ASE)/Vehicle Maintenance (VMXS) Facility in the amount of 30,300 GSF. Demolition of 22,777 GSF. Design documentation including a 100% Design Drawings and 100% Design Specifications are attached.

3. BACKGROUND. The current ASE facility (Building 27) was constructed in 1981 and is exceptionally out of date. The building was originally constructed as a Munitions building and was not designed nor constructed to support ASE maintenance. Building 16 currently houses the VMXS shop. That facility was constructed concurrent with Building 27 and shares its condition.

The facility does not have maintenance bays large enough to support K-Loader and De-Icing truck maintenance requirements, insufficient parts and tool storage, ventilation is insufficient for welding and gas cutting requirements and overhead doors are too small to fit the newer vehicles and equipment that is assigned to C-130 mission.

4. SCOPE. Construct a Composite Aircraft Support Equipment (ASE) and Vehicle Maintenance (VM) facility In Accordance With (IAW) 100% Design Drawing and Specifications.

5. SUMMARY OF WORK. Work shall consist of, but not be limited to:

Construct (furnish and install all specified materials) to a complete, functional and acceptable Composite Aircraft Support Equipment (ASE) and Vehicle Maintenance (VM) facility as designed IAW project specific drawings and specifications. Construction shall include all of the following:

(1) All permitting, and associated erosion and sedimentation controls, required by state, local, and/or federal authorities having jurisdiction.

(2) All disturbed areas shall be restored to existing conditions, unless specified otherwise in the design documents.

(3) Establish an acceptable stockpile location for soil to be reutilized as common fill. No soil is allowed to be removed from the site due to potential pesticide contamination.

(4) Verify location of existing utilities within the limits of construction.

(5) Furnish as-built drawings.

(6) Furnish 1-year warranty for all General Contractor work.

6. AT/OPSEC.

a) Access and General Protection/Security Policy and Procedures. This standard language is for contractor employees with an area of performance within Government controlled installation, facility, or area. The contractor shall comply with all applicable installation/facility access and local security policies and procedures, which may be obtained from the Contracting Officer’s Representative (COR). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by the local installation’s Security Forces, Director of Emergency Services or local Security Office. The contractor shall ensure compliance with all personal identity verification requirements as directed by DoD, HAF

STATEMENT OF WORK

Bradley Air National Guard Base CEKT179200 Construct Composite ASE/VMXS 21 September 2022 and/or local policy. Should the Force Protection Condition (FPCON) change, the Government may require changes in contractor security matters or processes.

b) For Contractors that do not require CAC, but require access to a DoD Facility and/or Installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (AFI 10-245, AFI 31- 101 and AFMAN 31-113), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

c) Antiterrorism Awareness Level I Training (AT Level I). This standard language is for contractor employees with an area of performance within a US Government controlled installation, facility or area. All contractor employees, to include subcontractor employees, requiring access to US Government installations, facilities and controlled access areas shall complete AT Level I training within 7 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. AT Level I may be accomplished by a Level I qualified instructor; completing the Force Protection computer-based training (CBT) course on Joint Knowledge Online (JKO) at http://jko.jten.mil/courses/atl1/launch.html.seam. For those without a CAC, select"Non-CAC" user on the JKO site. Tracking for each contractor or subcontractor employee is the responsibility of the COR or unit AT Representative.

d) Requirement for OPSEC Training. In accordance with AFI 10-701, Operations Security, OPSEC PMs/SMO/SMNCOs/Coordinators will provide OPSEC training or training materials to contract employees within 30 days of employees’ initial assignment to the contract and prior to having access to any critical information (CI) and annually thereafter. General organizational orientations may need to be supplemented by duty-related orientations in the work center targeted toward specific critical information and vulnerabilities associated with the work. Initial training (OPSE 1301 - OPSEC Fundamentals) located on the Defense Counterintelligence and Security Agency website:

https://securityawareness.usalearning.gov/opsec/index.htm and the OPSEC Annual training- DAF-Operations Security Awareness Training located on My Learning https://lms-jets.cce.af.mil/moodle/course/view.php?id=11654#section-1.