SOW-4 Day Training SAM posting for 26Q1015.docx

STATEMENT OF WORK

FOR

Tactical Firearms Training (4-day)

1.0 INTRODUCTION

Firearms training will encompass the Fundamentals of shooting, moving, communicating, zeroing weapons, and then building to proficiency with pistol, rifle, transitions and stress courses.

1.1 SCOPE

Vendor will provide personnel with shooting fundamentals as it relates to combat shooting, combat mindset, speed and accuracy.

The Contractor shall provide course curriculum and instruction for four (4) consecutive days of tactical firearms training for up to 16 students. All trainees will already have body armor with plates, ballistic helmet, pistol, rifle, holster, ear and eye protection, and the number of rounds required for the pistol/rifle qualification drill they are completing. This can be tailored by the instructors as they see fit to facilitate training. Additionally, individuals shall use their command issued optics for their respective Category III and IV training and qualifications. Training shall include both classroom and practical training exercises in a realistic field environment.

The Contractor is required to provide all necessary equipment, materials, and training site to support this course of instruction. Transportation for the students to and from training locations will be provided.

2.0 Four Day Tactical Shooting REQUIREMENTS

The Contractor shall provide classroom instruction followed by a combination of hands-on technical practical exercises and full mission profile scenarios that both inform the students and afford them an opportunity to practice techniques at a location the contractor will provide.

The training curriculum is designed to support three consecutive days of instruction for 16 students. The Contractor must provide both classroom and practical training that provides a focus in the following areas:

1) In-classroom training

2) Training exercise using static and multi targets

3) Dynamic courses “stress courses”

2.1 IN CLASSROOM TRAINING

Instruction should be applicable to a multitude of environments from desert, to urban, to the cold weather encountered at high altitude and everywhere in between ensuring that the student is trained for all environments.

The Contractor shall provide course instruction to address the following:

a. Application of accuracy and time

b. Varied shooting positions (stable and unstable)

c. Rapid acquisition of a target that is not in your initial field of view

d. Use of cover and concealment (barricades)

e. Shooting multiple targets

f. Speed/tactical reloading of weapons

g. Use of secondary weapons

h. Weapons transition (primary to secondary)

i. Weapons malfunctions (immediate/remedial)

j. Varied target distances (multiple sight alignment)

k. Shooting while moving and adverse shooting angles

2.2 Single Day Staff Shooting REQUIREMENTS

The Contractor shall provide instruction followed by a combination of hands-on technical practical exercises that both inform the students and afford them an opportunity to practice techniques at a location the contractor will provide with an 80-mile radius of Indian Head, MD.

The training curriculum is designed to support One day of instruction for up to 16 students. The Contractor must provide instruction and practical training that provides a focus in the following areas:

1) Weapon familiarization

2) Training exercise using static and multi targets

2.1 1) Weapon familiarization

Instruction should be applicable to a multitude of environments from desert, to urban, to the cold weather encountered at high altitude and everywhere in between ensuring that the student is trained for all environments.

The Contractor shall provide course instruction to address the following:

a. Weapons familiarization

b. Varied shooting positions (stable and unstable)

c. Rapid acquisition of a target that is not in your initial field of view

d. Use of cover and concealment (barricades)

e. Shooting multiple targets

f. Use of secondary weapons

g. Weapons transition (primary to secondary)

h. Weapons malfunctions (immediate/remedial)

j. Varied target distances (multiple sight alignment)

2.2 TRAINING EXERCISE

The Contractor shall provide a location for the Training Exercise. The Contractor shall conduct training that includes but not limited to the following:

a. Category III/IV Pistol Core Competency: High or Low Ready, Standing Draw, Standing to Kneeling Draw, 180 turn (left or right), Speed Reload, Immediate Action, Remedial Action, Standing 25 yd Draw, Pistol Barricade Drill, Dynamic Pistol Course (three COF options – must perform one).

b. Category III/IV Rifle Core Competency: High or Low Ready, 180 turn (left or right), Speed Reload, Immediate Action, Remedial Action, Weapon Transition. Standing Distance, Standing to Kneeling Distance, Standing to Prone Distance (greater than 100 yards), Rifle Barricade rill. Dynamic Rifle Course (three COF options – must perform one).

c. Category IV Only: Stress test.

Students shall use the knowledge gained through in-classroom instruction to make their own coherent and informed decisions about the selection and application of medical items to utilize during the training in realistic scenarios. (This is a requirement for the firearms course).

3.0 DELIVERABLES

1. The Contractor shall supply the targets and range training material.

2. The Contractor shall provide detailed unclassified student handouts and student guides to complement academic lessons per class. Each student guide at a minimum will provide a paper copy of the slides used to teach each lesson (2 per page maximum). This package is deliverable to each participant upon completion of the training.

3. The Contractor shall deliver participant certificates upon completion of the course that state at a minimum the name and rank of each participant, hours of instruction, and course title.

4.0 PERIOD AND PLACE OF PERFORMANCE

The Contractor shall have a curriculum ready to deliver training for the anticipated dates and locations as follows:

Period of Performance: January 2026

Training Location

Contractor will provide location with an 80-mile radius of Indian Head, MD 20640. Location will be noted in Quote

Training Exercise round count

Accounting for a 4-day course with 16 shooters ammo count would look as follows below. They will have the required ammo for this training. (Not required to quote).

Day 1 pistol 400x10=6000 A363 Day 2 rifle 492x10=7500 AA53 Day 3 pistol and rifle 3000 A363 3500 AA53 Day 4 pistol and rifle 3000 A363 3500 AA53

4.1 EVALUATIONS AND CERTIFICATIONS:

The Contractor shall provide course evaluation forms that allow participants to comment on the primary blocks of instruction and make recommendations for improvement. The The contractor shall provide a summary of the information contained on the individual evaluation forms.

4.2 NON-PERSONAL SERVICE STATEMENT

Contractor employees performing services under this order will be controlled, directed, and supervised at all times by management personnel of the contractor. Contractor management will ensure that employees properly comply with the performance standards outlined in the SOW. Contractor employees will perform their duties independent of, and without the supervision of, any Government official. The tasks, duties, and responsibilities set forth in any task order issued may not be interpreted or implemented in any manner that results in any contractor employee creating or modifying Federal policy, obligating the appropriated funds of the United States Government, overseeing the work of Federal employees, providing direct personal services to any Federal employee, or otherwise violating the prohibitions set forth in Parts 7.5 and 37.1 of the Federal Acquisition Regulation (FAR).

4.3 ORGANIZATIONAL CONFLICTS OF INTEREST

The contractor acknowledges that it is familiar with FAR subparagraph 9.5, Organizational and Consultant Conflicts of Interest, and agrees to avoid, neutralize or mitigate such conflicts of interest in accordance with the principles set forth in the FAR. If performance of this SOW requires the contractor (including subcontractors) to supply technical support related to systems or projects with which the contractor is already directly concerned, by prime or subcontract, the contractor shall immediately inform the Contracting Officer. The SOW may be withdrawn if a conflict is found. The Contractor shall not undertake performance of this SOW, which may require it to supply technical support regarding such systems until the notice is given and written consent to proceed issued by the Contracting Officer.

5.0 GOVERNMENT FURNISHED MATERIAL:

No Government Furnished materials are required for this effort.

6.0 CONTRACTOR CERTIFICATIONS / QUALIFICATIONS

Instruction team should be composed of former military special operations personnel, Expeditionary Forces or police specialized tactical and combat shooting. All instructors and staff must be familiar with and compliant with the DOD requirements outlined in OPNAVINST 3591 COMNECCINST 3591.1A. Each instructor shall have hands on knowledge and be a qualified professional Subject Matter Experts with strong communication skills.

8.0 CONTRACTOR PERSONNEL SECURITY

Instructors are required to be U.S. Citizens. The class provider does not require security clearance data.