SOW 3D Printer FDM Additive Manufacturing.pdf

STATEMENT OF WORK

PURCHASE OF FDM Additive Machine

I. Requirement. The awarded contractor shall provide timely delivery of Government requested material to the address provided below unless otherwise specified by the Government. The Government is procuring (75) MakerGear Ultra One FDM Additive Machines with modified MWMSS door and mounted lifting straps. One option year to procure (25) MakerGear Ultra One FDM Additive Machines with modified MWMSS door and mounted lifting straps.

a. The contractor shall provide the following quantity of (75) MakerGear

Ultra One Machines with modified MWMSS doors and mounted lifting straps for the Base Year.

Table 1

Part Number

Part Descriptio n

Total

Quantity

MG2000MDS MakerGear Ultra One MWMSS Doors & mounted lifting straps

1. The Contractor shall follow the following notations for the FDM

Additive Machine:

2. The FDM Additive Machine must fit within the MWMSS enclosure within the space of 32 x 32 x 32 inches.

3. The FDM additive Machine must have dual independent deposition heads

4. The FDM Additive Machine must take 1.75 mm filament.

5. The FDM Additive Machine must have a heated bed

6. The FDM Additive Machine must be able to accept build files via

USB Drive, WiFi, and Ethernet.

7. The FDM Additive Machine must be compatible with Simplify 3D software.

8. The FDM Additive Machine must have automatic bed leveling.

9. The FDM Additive Machine build area must be enclosed.

10. The FDM Additive Machine must have an internal material bay.

11. The FDM Additive Machine must have a touch screen

12. The FDM Additive Machine should run some form of the software

OctoPrint.

13. Machine should be a polymer extrusion machine with two independent extrusion heads known as IDEX. A build platform if 14 x 16 inches, and be able to have open materials, and be able to be set up via off the shelf third party slicing software such as Cura, Simplify 3D, or Prusa Slicer

14. The items listed above shall be received no later than 8 weeks after order.

b. Option year one the contractor shall provide the following quantity of (25) MakerGear Ultra One Machines with modified MWMSS doors and mounted lifting straps for the Base Year.

Table 1

Part Number

Part

Descriptio n

Total

Quantity

MG2000MDS MakerGear Ultra One MWMSS Doors & mounted lifting straps

1. The Contractor shall follow the following notations for the FDM

Additive Machine:

2. The FDM Additive Machine must fit within the MWMSS enclosure within the space of 32 x 32 x 32 inches.

3. The FDM additive Machine must have dual independent deposition heads

4. The FDM Additive Machine must take 1.75 mm filament.

5. The FDM Additive Machine must have a heated bed

6. The FDM Additive Machine must be able to accept build files via

USB Drive, WiFi, and Ethernet.

7. The FDM Additive Machine must be compatible with Simplify 3D software.

8. The FDM Additive Machine must have automatic bed leveling.

9. The FDM Additive Machine build area must be enclosed.

10. The FDM Additive Machine must have an internal material bay.

11. The FDM Additive Machine must have a touch screen

12. The FDM Additive Machine should run some form of the software

OctoPrint.

13. Machine should be a polymer extrusion machine with two independent extrusion heads known as IDEX. A build platform if 14 x 16 inches, and be able to have open materials, and be able to be set up via off the shelf third party slicing software such as Cura, Simplify 3D, or Prusa Slicer

2. Government Furnished Property or Assistance. None

3. DELIVERY/LOGISTICS.

3.1 The contractor shall deliver the data/supplies /services to:

U.S. Army DEVCOM CBC Attn: Bradley Ruprecht 410-436-6655 8500 Otto Road Bldg 4301

APG-EA, MD 21010

3.2 Inspection and Acceptance of the items will be conducted at destination by authorized Chemical Biological Center (CBC) government personnel.

4. Safety Security Considerations. None

5. Security Considerations. None (The contractor shall not be required to have access to classified material; to generate classified material; or to store classified material at the contractor's or government facility or whether access to the CCDC local Area Network is required.)

6. Government Point of Contact.

U.S. Army DEVCOM CBC Attn: Bradley Ruprecht 410-436-6655 8500 Otto Road Bldg 4301

APG-EA , MD 21010

**** NOTICE OF RELEASE OF INFORMATION:

Although not classified, information concerning the award of this contract is considered to be of a sensitive nature. Therefore, release of any information regarding this contract, other than the award date, award dollar value, and contracting office is PROHIBITED without the express written consent of the Contracting Officer.