SOW 3D Printer - 21722-1.pdf

Fused Deposition Modeling (FDM) Additive Machine

BACKGROUND:

I. Requirement. The awarded contractor shall provide timely delivery of Government requested material to the address provided below unless otherwise specified by the Government. The Government is procuring (20) Makergear Ultra One Fused Deposition Modeling (FDM) Additive Machines with modified Metalwork Mobile Shop Set (MWMSS) door. These machines will be part of an additive manufacturing kit that will be inserted in the MWMSS system. This kit has been designed to meet warfighter needs to supply replacement parts at the point of need in a forward deployed situation. The Army Spec machine has been changed from the off the shelf version of the machine to meet the needs of deployment with the MWMSS

a. The contractor shall provide the following quantity of (20) Makergear Ultra One Machines with modified MWMSS door.

Table 1

Part Number

Part

Description

Total

Quanti ty

MG2000MD Makergear Ultra One MWMSS Door 20

b. The Contractor shall follow the following notations for the FDM Additive Machine:

a. The FDM Additive Machine must fit within the MWMSS enclosure within the space of 32 x 32 x 32 inches.

b. The FDM additive Machine must have dual independent deposition heads

c. The FDM Additive Machine must take 1.75 mm filament.

d. The FDM Additive Machine must have a heated bed

e. The FDM Additive Machine must be able to accept build files via USB

Drive, WiFi, and Ethernet.

f. The FDM Additive Machine must be compatible with Simplify 3D software.

g. The FDM Additive Machine must have automatic bed leveling.

h. The FDM Additive Machine build area must be enclosed.

i. The FDM Additive Machine must have an internal material bay.

j. The FDM Additive Machine must have a touch screen

k. The FDM Additive Machine should run some form of the software

OctoPrint.

c. Machine should be a polymer extrusion machine with two independent extrusion heads known as IDEX. A build platform if 14 x 16 inches, and be able to have open materials, and be able to be set up via off the shelf third party slicing software such as Cura, Simplify 3D, or Prusa Slicer

d. The items listed above shall be received no later than 8 weeks after order.

2. Government Furnished Property or Assistance. None

3. DELIVERY/LOGISTICS.

3.1 The contractor shall deliver the data/supplies /services to:

U.S. Army DEVCOM CBC Attn: Bradley Ruprecht 410-436-6655 8500 Otto Road Bldg 4301

APG-EA, MD 21010

3.2 Inspection and Acceptance of the items will be conducted at destination by authorized DEVCOM CBC government personnel.

4. Safety Security Considerations. None

5. Security Considerations. None.

6. Government Point of Contact.

U.S. Army DEVCOM CBC Attn: Bradley Ruprecht 410-436-6655 8500 Otto Road Bldg 4301

APG-EA , MD 21010

**** NOTICE OF RELEASE OF INFORMATION:

Although not classified, information concerning the award of this contract is considered to be of a sensitive nature. Therefore, release of any information regarding this contract, other than the award date, award dollar value, and contracting office is PROHIBITED without the express written consent of the Contracting Officer.