SOW 2Aug2022.pdf

STATEMENT OF WORK

AEROSPACE MISCELLANEOUS COATINGS AND SEALANTS

OO-ALC

Ogden Air Logistics Complex

Hill Air Force Base, Utah 84056

Revised

2 Aug 2022

TABLE OF CONTENTS

SECTION TITLE PAGE

1 SCOPE ………………………………………………………………………… 3

2 DESCRIPTION……………………………………………………………… 3

3 SERVICES SUMMARY…………………………………………………… 4

4 GENERAL INFORMATION……………………………………………… 5

5 COMMUNICATIONS SECURITY……………………………………… 6

6 CONTRACTOR EMPLOYEES…………………………………………… 6

7 HOURS OF OPERATION………………………………………………… 7

8 ENVIRONMENTAL CONTROLS……………………………………… 7

9 SAFETY REQUIREMENTS……………………………………………… 8

10 APPLICABLE DOCUMENTS…………………………………………… 9

APPENDICES

A Publication List

B Product List

C Safety

1. SCOPE

1.1 The purpose of this BPA is to provide delivery of miscellaneous aerospace coatings and sealants to support the OO-ALC at Hill Air Force Base (HAFB), Utah. The OO-ALC supports 309th Aircraft

Maintenance Group (309 AMXG), 309th Commodities Maintenance Group (309 CMXG), 309th

Maintenance Support Group (309 MSXG), and 309th Electronics Maintenance Group (309 EMXG).

1.2 The contractor shall provide all personnel, equipment, material, supervision, storage facilities, and transportation necessary to provide miscellaneous coatings and sealants.

2. DESCRIPTION

2.1 The contractor shall provide miscellaneous commercial materials from the authorized listing in Appendix B.

2.1.2 The miscellaneous Aerospace coating(s) and sealant(s) on product listing shall conform to

Military Specifications as directed by Technical Orders in support of workloads accomplished within

OO-ALC at HAFB. The contractor shall use best commercial practices, documentation and standards, except as noted, in this Statement of Work (SOW).

2.2 Coatings: The aerospace coatings shall comply with the specifications for each coating in Appendix B.

To ensure compliance the manufacturer and product name must be on the specification’s active qualified product list (QPL) or the manufacturer must provide a batch specific certificate of conformance (COC) to the applicable specification.

2.3 Sealants: The aerospace sealants furnished under this contract shall be qualified to the requirements of military and commercial specifications. Further refinement to the Military

Specifications; incorporated to reflect the specific needs for HAFB concerning quality assurance, uniformity, consistency between batches, and requirements to meet local environmental conditions.

2.3.1 Specifications for the aerospace sealants shall comply as follows: the specifications for each sealant listed in Appendix B. To ensure compliance the manufacturer and product name must be on the specification’s active qualified product list (QPL) or the manufacturer must provide a batch specific certificate of conformance (COC) to the applicable specification.

2.3.2 Unique Sealant Packaging:

2.3.2.1 Cartridges containing Chromate shall have a RED cap in color and non-Chromate shall have a

GREEN cap in color.

2.3.2.2. The Contractor shall develop a color-coded inventory control system for stock rotation to ensure shelf life management is met and to reduce waste. The Contractor shall provide the color-coded inventory control system to the Government initially and then when updated. (CDRL A001)

2.4 Delivery Requirements

2.4.1 The Government shall modified by increasing and/or decreasing the types and quantities of aerospace coatings and sealants as listed in Appendix B quarterly due to workload requirements during the life of the contract. The Contractor shall deliver approved orders to locations throughout the OO-ALC. Location(s) to be determined at BPA call level.

2.4.2 The Contractor shall be responsible to deliver to HAFB coatings and sealants listed in Appendix

B. The Contractor shall provide delivery (as specified by delivery request) to HAFB to preclude work stoppage, government storage problems and to avoid a partial delivery to meet mission requirements unless; in the best interest of the Government and accepted by the Hazardous

Material (HAZMART) Operator. In case of extreme events (vehicle accidents, weather, natural disaster, etc.), the contractor shall notify the delivery HAZMART Operator POC as outlined in delivery order as soon as possible; to provide an estimated delivery time/schedule. In the event any discrepancies in the quantity coatings and sealants arise, the contractor shall correct and deliver any inaccuracy no later than (NLT) the next business day and provide corrected invoice to the HAZMART

POC. The Contractor shall provide a product Safety Data Sheet (SDS), product Technical Data Sheet

(TDS), and an invoice for all deliveries. A Government authorized HAZMART POC at delivery location(s) shall sign all invoices.

2.4.3 The Manufacture date, Military or Commercial Specification shall be marked on all containers. To facilitate compliance with Department of Defense (DoD) Manual 4140.27 Vol 1, OO-ALCI23-113 paragraph

3.1.1.7, and DoDD 5134.12. The contractor shall process any returns to the manufacturer due to non-compliant material, incorrect shipments, and products delivered with less than 80% of original shelf life remaining from the date of the delivery unless waived on a case-by-case basis by HAZMART Supervisor.

3. SERVICES SUMMARY

Performance Objective PWS Reference Performance Threshold

Color-coded inventory control system.

(CDRL A001)

2.1.2.3.1 -

2.1.2.3.3

Upon contract award and when updated.

Incident/Mishap Report (CDRL A003) 4.3.4

Reported to the government

Security Manager within one (1) business day of loss.

4. GENERAL INFORMATION

4.1 Security Requirements. Compliance with all security and force protection requirements is mandatory and enforced at Hill Air Force Base (HAFB).

4.2 Comply with OO-ALC maintenance group identified in paragraph 1.1 in/out processing procedures for all contractor personnel to ensure proper security related briefing and debriefs are accomplished.

4.3 Contractor Identification Badge:

4.3.1 Badge/Unescorted Entry Authorization, IAW Hill AFB Instruction 36-812.

The Government security manager shall complete an “Unescorted Entry Authorization

Certificate” (AF Form 2586), for Controlled Area Line Badges requiring entry into controlled areas.

Contractors granted controlled area access shall complete all necessary training and a local background check prior to requesting access, annually thereafter, until contract completion. The

Contractor Representative shall complete a Form 496 for DBIDS, for each employee requiring access to HAFB and forward to applicable OO-ALC security officer for processing, annually thereafter until contract completion. The request shall be submitted to Security Forces Pass and Identification

(building 430). The AF Form 2586 & 496 shall be returned to the Government security manager for accountability. NOTE: a valid DBIDS must be issued prior to requesting controlled area access.

4.3.1.1. The Contractor employees who fail to complete annual training prior to anniversary date, and pass the written test, shall have their controlled area badge revoked and/or one shall not be issued.

4.3.1.2. If installation access is denied from a failed local file background check the contract employee/s shall be removed from the installation immediately and all credentials and access badges shall be returned to the issuing security manager the same day.

4.3.2 As required, the contractor employee shall obtain an access card from the appropriate Building

Security Manager.

4.3.3 When the Period of Performance (PoP) has ended or the task is considered complete, the contractor shall have three (3) business days to return all access cards, controlled area badges, and base identification badges to the applicable OO-ALC security officer for accountability.

4.3.4 During performance of the contract and at the completion or termination of the BPA, the contractor shall be responsible for prompt return of credentials within three business days to the appropriate security manager for any employee who no longer requires access to the work site, and for obtaining required identification of newly assigned personnel. Lost badges shall be reported to the government Security Manager within one (1) business day of loss. The contractor shall create an

Incident/Mishap report when a contract employee loses a DBIBs or Restricted/Controlled Area Badge

Line badge (CDRL A003).

4.3.5 The Contractor shall follow local group procedures for reporting and safeguarding actions to include: immediately report security violation(s) to the Group Security Manager and Government

PM all available facts related to each instance; and take such precautions as the Security Manager and Government PM may reasonably require for security purposes. Take reasonable and prudent action to establish control of the scene, prevent further violation, and to preserve evidence until released by proper authority; cooperate fully and assist Government personnel as the Government conducts an investigation of the violation. Participation shall last until the investigation is completed.

4.3.6.2 The contractor understands that any contractor employee may be summarily and immediately removed from or denied access to any government property, facility, and installation at the sole discretion of competent government authority if that authority determines such action is necessary to protect or preserve government property, safety and security, or to maintain good order and discipline.

5. COMMUNICATIONS SERCURITY

5.1 All communications with Department of Defense (DoD) organizations are subject to

Communications Security (COMSEC) review.

5.2 The DoD authorizes the military departments to conduct COMSEC monitoring and recording of telephone calls originating from, or terminating at, DoD organizations.

5.3 The Government advises the contractor that at any time they place a call to, or receive a call from, a

DoD organization, they are subject to COMSEC procedures.

5.4 The Contractor assumes the responsibility for ensuring wide and frequent dissemination of the above information to all employees dealing with official DoD information.

6. CONTRACTOR EMPLOYEES

6.1 The Contractor shall not assign to the BPA call performance any person including any employee of the U.S. Government if employing that person would create a conflict of interest under any law, regulation or policy of the United States Government. Additionally, the Contractor shall not assign to the BPA call performance, any person who is an employee of the Department of the Air Force, either military or civilian. Unless such person seeks and receives approval according to DoD Directive

5500.7-R and any other applicable regulation or policy of the Department of the Air Force or its subordinate commands.

6.2 All Contractor Management Staff or contractor personnel shall be clearly identified; at ALL times while on HAFB. The Contractor identification shall include conversations, mail, email, teleconferences, video teleconferences, faxes, and/or other electronic communication whether with Government personnel, other contractor personnel, or with the public when supporting this BPA where their status as contractor employees might not otherwise be apparent or where they might be mistaken for civil service employees. Air Force issued identification badges and any contractor badges shall be worn at or above the waistline during the individual’s duty hours at HAFB when not in a production or designated Foreign

Object Damage (FOD) hazard area.

7. HOURS of OPERATION

7.1 Normal hours of operation:

7.2 The Contractor shall deliver as required Monday through Friday between the hours of 0600 and

1630. The contractor shall not deliver to any drop stations between 1100 and 1200 unless otherwise specified by Program Manager (PM).

7.2.1 Unless otherwise required by the Government, the contractor shall not have access to Government facilities to delivery on the following federal holidays: New Year’s Day, Martin Luther King’s Birthday, President’s Day, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans’ Day, Thanksgiving Day, and Christmas Day. If the federal holiday falls on Sunday, it is observed on Monday. If the holiday falls on Saturday, it is observed on Friday. There may also be weather related days and

Government directed holidays. On these days, the Government PM shall notify the contractor and the contractor shall not be required to deliver; the contractor shall not bill the government for services not performed.

7.2.2 Weekends/Holidays: Not normally expected to provide deliveries on weekends or holidays.

Unless notified by the government shop supervisor or Engineering of a coatings or sealants failure requiring services from the contractor.

8. ENVIRONMENTAL CONTROLS

8.1. Compliance with Laws and Regulations. The Contractor shall be knowledgeable of and comply with applicable Interstate, Federal, State, and Local laws, and regulations. In the event of a guidance conflict, the contractor shall follow the most stringent requirement. In the event environmental laws/regulations change during the term of this contract, the contractor is required to comply as such laws come into effect. If there is an increase or decrease in cost as a result of the change, the contractor shall inform the CO or PM pursuant to notice requirements and negotiate a modification to the contract.

8.2. The Contractor shall ensure their employees are made aware that the performance of these services shall occur in industrial areas. The OO-ALC (Ogden Air Logistics Complex) has the potential to expose workers to hazardous materials which may include, but is not limited to: hexavalent chrome, cadmium, beryllium, lead and others. While the contractor shall not perform duties in a marked and signed regulated area [where exposures are expected to exceed the permissible exposure limits set by

Occupational Safety & Health Administration (OSHA) 29 CFR 1910 Subpart Z], there may be contact hazards with these materials during cleanup of dust, metal shavings, etc. It is the contractor’s responsibility to identify such potential hazards to their contractor employees. The contractor shall ensure proper protective measures and training is taken to ensure contracted employees are protected from these hazards. Contractors should determine their own PPE requirements, after the Government informs them of the recognized hazards. Contractors shall adopt their own procedures, and shall adopt their own Contractor Hazard Assessment. The site location’s Bioenvironmental Engineering Flights have produced industrial hygiene assessments of these areas which are for information only and shall be provided at the contract level.

8.2.1 Notification of Environmental Spills. If the contractor spills or releases any substance into the environment, the contractor or its agent shall immediately report the incident to the Base Fire

Department, as identified in each BPA call. If the incident location is Hill AFB, the contractor shall contact the Hill AFB Fire Department at phone number 911. The liability for the spill or release of such substances rests solely with the contractor and its agent.

8.2.2 Material Storage and Use. The contractor shall follow manufacturer’s guidelines and professional recommendations for temperature, cleanliness, and materials handling, storage, and disposal. This may include hazardous waste/materials. The Contractor shall work with and dispose of various Hazardous

Material Management IAW AFI32-7086_HILLAFBSUP, AFMAN 32-7002 chapter 3, Waste Management, AFMC and Base Supplements, and locally developed operating instructions. The Safety Data Sheet (SDS) shall be maintained on file IAW OSHA 29 CFR 1910 and shall be available to employees for review of safety and health information. The Contractor shall have a hazardous communication program developed and implemented. IAW OSHA 29 CFR 1910, to inform employees of potential hazards if and when chemicals are used, inform their employees of the labeling system, ensure their employees are trained on how to read a SDS, that the SDS is available for review, safety, and health information, and to determine the proper Personal Protective Equipment (PPE) required.

9. SAFETY REQUIREMENTS

9.1 In performing work under this contract, the contractor shall:

9.1.1 Conform and comply with the safety requirements contained in the contract for all activities related to the accomplishment of the work. This includes the wearing of appropriate PPE. All required PPE shall be furnished by the contractor. Contractors shall conduct their own Hazard Assessment and determine what PPE they shall need.

9.1.2 Comply with all safety requirements including, but not limited to all those detailed in OSHA (Public

Law 91-596), AFIs, local Operating Instructions, and process orders, Confined Space Standards, Technical

Orders in relationship to safety, and Environmental Protection Agency (EPA) instructions for the protection of their employees. The contractor shall be responsible for the safety and accountability of all its employees. In the event there is conflicting guidance, the contractor shall follow the most stringent.

9.1.3 The Contractor shall always provide services in a manner, which prevents mishaps and is in compliance with all OSHA standards per AFI91-202.

9.1.4 The Contractor shall implement a safety program IAW Appendix C.

9.1.5 Ensure proper protective measures and training is taken to protect contract employees from these hazards identified in paragraph 8.2. The contractor shall instruct his/her employees to recognize potential hazards, and where necessary, inform them how to avoid the dangers associated with them. The site location Bioenvironmental Engineering Flight has produced industrial hygiene assessments of these areas in which the contractor may be working. These assessments shall be provided for contractor information only. IAW OSHA 29 CFR 1910, the contractor should be aware that the contractors are responsible for their own OSHA violations occurring in the performance of this contract. Any costs associated with issued citation are not an allowable cost under the contract or allocable to any other Government contract and production of any documentation as may be required by OSHA. The contractor shall ensure these OSHA requirements are requirements of any subcontractors.

10. APPLICABLE DOCUMENTS:

10.1. Compliance with all publications, regulations and operating instructions provided by the

Government or referenced in this SOW and subsequent BPA calls are required.

10.2. All Air Force Instruction (AFI) or AFI Supplements referenced in this SOW are attached and/or available via Air Force Epubs website https://www.e-publishing.af.mil/Product-Index/.

APPENDIX A

PUBLICATIONS

The Contractor shall reference and comply with most current versions of the below publications through https://www.e-publishing.af.mil/Product-Index/, https://www.esd.whs.mil/DD/, and https://www.osha.gov.

AFMAN32-7002 chapter 3 Hazardous Material Management

AFMAN91-203, chapter 21 paragraph 21.8 Contractors

DoDM (Department of Defense (DoD) Manual) 4140.27 Vol 1 DoD Shelf-Life Management

Program: Program Administration

DoDD (Department of Defense (DoD) Directive) 5134.12 Assistant Secretary of Defense for

Logistics and Materiel Readiness (ASD(L&MR))

DoDD (DoD Directive) 5500.7-R Standards of Conduct “Joint Ethics Regulation”

AFI32-7086_HILLAFBSUP Hazardous Material Management

HILLAFBI36-812 (Hill AFB Instruction 36-812) Issue of Common Access Cards to

Contractors

Occupational Safety & Health Administration (OSHA) 29 CFR 1910 Subpart Z

(https://www.osha.gov/laws-regs/regulations/standardnumber/1910)

OO-ALCI 23-113 Shelf Life Management of Hazardous Materials

(https://static.e-publishing.af.mil/production/1/oo-alc/publication/oo-alci23-113/oo-alci23-

113.docx.pdf)

APPENDIX A

https://www.e-publishing.af.mil/Product-Index/ https://www.osha.gov/laws-regs/regulations/standardnumber/1910 https://static.e-publishing.af.mil/production/1/oo-alc/publication/oo-alci23-113/oo-alci23-113.docx.pdf https://static.e-publishing.af.mil/production/1/oo-alc/publication/oo-alci23-113/oo-alci23-113.docx.pdf

APPENDIX B

PRODUCTS LIST

Line

Description/Noun Part Number Stock Listing/Local Purchase

Unit of Issue

Mil-Spec QTY

1 MAGNOBOND 6363

MAGNOBOND 6363

Adhesive 8040014493552 Qt 10

MAGNOBOND 6363 A/B

(QUART)

MAGNOBOND 6363 A/B

(QUART) 8040014493552 Qt 10

3 RTV 109 RTV 109 8040001429823 11.3 OZ KT MIL-A-46146 48

4 SS-25 Silicone 3oz Tubes 8030PHM00085618 3 oz Tube None Identified 40

5 PR100 Adhesive 8040PHM00329381 None Identified 4

6 Black Stencil Ink 7510PHM00005294 Pint None Identified 4

7 Aeroshekk Grease 64 9150009354018 Tubes MIL-G-21164 2

8 CR5753A/B-40 QT Arathane 5753 - Sealant 1 QT KIT None Identified 24

9 LOC 635 Loctite 635 - Sealant 50 CC None Identified 50

10 FG350 Fresh Gear FG350 -Cleaner 1 Gal None Identified 100

11 FK270

Low Foaming FK270-GC - Cleaner 1 Gal None Identified 100

12 5PTMLG69FR1 LG 69 LORD 309 - Adhesive Pint 100

13 RTV 560 RTV 560 Kit 100

14 SR-40 SR40 SOLVENT GAL None Identified 100

15 FB245LOT SOLVENT DEGREASER 55 GAL MIL-PRF-680-TYII 40

16 910477 CLEANING COMPOUND 55 GAL None Identified 40

17 N/A URETHANE COATING 1QT CN None Identified 200

18 LP729-2 FUEL CELL ADHESIVE 36oz KT None Identified 20

19 6850PHM00014240 ADHESION PROMOTER 50ML KT None Identified 25

20 0674-111 DLA LHB Industries CAN 34

21 0674-190 DLA LHB Industries CAN 35

22 0674-170 DLA LHB Industries CAN 27

23 0674-381 DLA LHB Industries CAN 15

24 7950-9581 55# box

TO ADD POWDER PAINT, DC

WHITE 80100HM000156 55# BOX 15

25 7950-50549 55# box

TO ADD POWDER COATING,

AIR FORCE BLUE 8010PHM00014970 55# BOX 15

26 3110-91142-1 55# box

TO ADD TPOWDER COATING,

EXTREME BLACK 8010PHM00064548 55# BOX 240

27 10-7199

TO ADD POWDER COATING,

LOW CURE, BLACK 8010PHM00005859 55# BOX 8

28 6420

LPS G-9 DEGREASER LOW

VOC 6850PHM00316696 15oz 24

29 10013

ACF-50 CORROSION

PREVENTIVE SEALANT 8030014384079 13OZ CN 12

30 16130

FLEXBAR REPRO RUBBER

PUTTY 8030PHM00023846

12OZ. JR-

1/JR 4

31 PR-1200 CLEAR COAT RTV 1200 8040008454304 1 PINT CAN 12

32 702167/1373425

HYSOL EPK ADHESIVE

(2PART) 8040007770631 2PART 15

33 REPRO-RUBBER BLUE MOLDING PUTTY 8030PHM00079487 4LB 8

34 HEXOFF SERFACE CLEANER CLEANER 7930PHM00511284 OT 60

35 1420 LPS PERSOLVE 6850PHM00014237 15OZ CAN 48

36 FACSIMILE POWDER FACSIMILE POWDER 6850PHM00106737 3LB 6850PHM00318066 200

37 FACSIMILE CURING LIQUID FACSIMILE CURING LIQUID 6850PHM00064151 PINT 6850PHM00510589 200

38 ENERPAC OLI HYDRULIC FLUID 9150PHM00003006 GAL 2

39 LUBE #3 HIGH PRESSURE LUBE 9150PHM00017760 4OZ TU 2

40 380 SILICONE SILICONE 8030PHM00014288 10.3 TU 5

41 RC-77 INSP. PENETRANT 9850PHM00096350 11OZ CAN 2

42 FP-95A (m) INSP. PENETRANT 6850PHM00094232

10.9OZ

CAN 2

43 LPS 2 LUBRICANT 9850PHM00004835 11OZ CAN 6

44 WHITE PAINT WHITE PAINT 8010PHM00345649 1OZ KIT 100

45 HD382841

B2 MORTITE CAULKING

CORD 8030005825191 BOX 20

46 BR 6747-1

BR 6747-1 WATER BASED

PRIMER 8040PHM00039815 PINT 4

47 BR6747-1

BR 6747-1 Waster Based Primer, 20-40% Solids 6850015655074 1 Gal CN 4

HYGENALL HEXOFF SURFACE

CLEANER

HYGENALL HEXOFF SURFACE

CLEANER 7930PHM00511284 QT 4

49 SODIUM THIOSULFATE SODIUM THIOSULFATE 6810001487156 BT 1

50 TC-284 A/B POLYSOFT

TC-284 A/B POLYSOFT 4

GALLON KIT 6810PHM00345857 4 GAL KIT 6

51 22CF MIL-PRF-81322G

LUBRICANT, GREASE ROYCO

22CF MIL-PRF-81322G 9150PHM00513310 TU MIL-PRF-81322G 6

52 MOBIL 28

MOBIL 28 SYNTHETIC

AVIATION GREASE 9150015191200 TU 100

736 HEAT

RESISTANT/SEALANT 8030PHM00014287 3 OZ TU 10

54 222m Loctite 222m Low Strength Purple Threadlock 50 mL 8030010693046 50mL MIL-SPEC 46163 10

55 609 Loctite 609 Retaining Compound 8030010693046 50mL None Identified 5

56 638 Loctite 638 Med Strength Retaining Compound 10mL 8030016013389 10mL None Identified 5

57 598 Loctite 598 RTV Black 70mL None Identified 5

58 88 Loctite 088 Red Grade A 50mL None Identified 5

59 7471 Loctite 7471 Primer 1.75 Fl OZ None Identified 5

60 271 Loctite 271 High Strength Red Threadlock 50mL None Identified 10

61 RTV162

Momentive RTV 162 White Electronics Silicon 2.8oz 8040015126367 2.8oz None Identified 5

62 RTV11 RTV11 White Pint None Identified 5

63 C111 Sta-bond C111 Pint None Identified 2

64 2402 Bostick 2402 A&B Kit Liter None Identified 2

65 9252 Bostick 9252 Yellow Brown Primer Liter None Identified 5

66 DY910

Dymax 910 10mL Syringe Adhesive 10mL None Identified 200

67 24-7050-9710 SOLDER, FLUX CORED, .031" 3439PHM00008510 1LB SPOOL None Identified 200

68 MIG .002 SOLDER, FLUX CORED, .02" 3439PHM00008511 1LB SPOOL None Identified 200

69 331760 SOLDER, TIN ALLOY 3439PHM0008512 1LB SPOOL None Identified 200

70 MIG.025 SOLDER, ROSIN CORE, .025" 3439PHM00008517 1LB SPOOL None Identified 350

71 21178 SOLDER PASTE 3439PHM00017121 500G JAR None Identified 3000

72 282565

ISOPROPYL ALCOHOL,

TECHNICAL 6810PHM00016934 128 OZ None Identified 2

SULFUR HEXAFLUORIDE,

TECHNICAL 6830PHM00075321

CYLINDER None Identified 3000

74 PX-20

UNI PAINT MARKERS PX-20

PX-21 PX-30 ALL COLORS 7520PHM00005716 EA None Identified 3000

75 MARKAL WHITE MARKER, TUBE TYPE, WHITE 7520PHM00058799 EA None Identified 600

76 MARKAL RED MARKER, RED, MEDIUM 8010PHM0001337 EA None Identified 10000

77 MARKAL RED OIL

ENAMEL MARKER, OIL BASE,

GREY, GLOSS 8010PHM0007067

33 FL OZ

EA-1/EA

ICP11927426-

38266

ICP120212128-

38266 3

78 MARKAL ENAMEL - RED

ENAMEL, RED GLOSS, OIL

BASE 8010PHM00012537

25 FL OZ

BT-1/BT

ICP119612864-

38266 30000

79 MARKAL F-BLACK OIL

ENAMEL MARKER, OIL BASE,

BLACK, FLAT 8010PHM00012543

33 FL OZ

EA-1/TU

ICP119612864-

38266

ICP12029462-

38268 15000

80 MARKAL WHITE OIL

ENAMEL MARKER, OIL BASE,

WHITE, GLOSS 8010PHM00014250

33 FL OZ

TU-1/EA

ICP11927426-

38266 13000

81 MARKAL G-BLACK OIL

ENAMEL MARKER, OIL BASE,

BLACK, GLOSS 8010PHM00014251

33 FL OZ

EA-1/EA

ICP119612864-

38266

ICP12029462-

38268 20000

82 MARKAL ENAMEL F-BLACK

ENAMEL MARKER, OIL BASE,

BLACK, FLAT 8010PHM00014252

33 FL OZ

EA-1/EA

ICP11927426-

38266 500

83 RTV-1200

SEALANT, PRIMER, SILCONE

RTV SURFACE PREP, RED 8030PHM0006209

10.9 OZ

CAN None Identified 500

84 CRC-18411

SEALANT, URETHANE,

CIRCUIT BOARDS, AEROSOL 8030PHM00006911 12 OZ CAN None Identified 500

85 1696157

SEALANT, SILICONE

ELASTOMER, CONDUCTIVE

ENCAPSULANT, KIT 8030PHM00058795

1 PINT

A/VIAL B None Identified 250

86 VBT-54110

SEALANT, SLIP FITTED PARTS,

GREEN 8030PHM00069101 10mL BOTT None Identified 250

87 LOC 7649

SEALANT, LIQUID, EPOXY

ACTIVATOR, GREEN, LOCTITE

7649 8030PHM00074551 1.75 OZ MIL-S-22473E 500

88 T-88

ADHESIVE, EPOXY RESIN

FABRICATION, KIT 8040PHM00045499 1 PINT A&B None Identified 250

ADHESIVE, EPOXY RESIN

FILM 8040PHM00024910

10 x 12 Sheet None Identified 250

ADHESIVE, EPOXY RESIN

FILM 8040PHM00024912

12 x 12 Sheet None Identified 200

91 WAL1214564

POLYURETHANE, FAST

CURING, AREOSOL 8010PHM00098912

340mL AEROSOL None Identified 200

92 LOC-609

ADHESIVE RETAINING

COMPOUND 8040PHM00513607 50mL None Identified 200

93 LOC - ADHESIVE ADSHESIVE, ANAEROBIC 8040PHM00517092 50mL None Identified 3000

94 FLUX 285

285 FLUX-CORED LEAD (PB)

SOLDER, .025" 3439PHM00320011

1 LB SL-

1/SL

IBC19355357-

XXXXX 300

95 10125

44 LEAD (PB)ALLOY SOLDER

WIRE, 10125 63SN37PB 3439PHM00329852 1LB SL-1/SL

IBC19355357-

XXXXX 3000

96 PDC1058421 DUSTER, AEROSOL 6830PHM00009024

8 OZ CN-

1/CN

IMI204513311-

39672 3

97 460-150G

HEAT TRANSFER FLUID,

SILICONE, 100 CS 6850PHM00075338

1 PT BT-

1/BT

IEQ16307123-

38266 3000

98 3306 LECITHIN MOLD RELEASE 6850PHM00319862

16 OZ CN-

1/CN

IEQ16306221-

38266 3000

99 310-AG-GEL POLYGONE 310-AG-GEL 6850PHM00515303

6 FL OZ CO-

1/CO

ICR118114615-

41456 3

100 STA-BIL 360 22275 DIESEL ADDITIVE 6850PHM00526880

32 FL OZ

CO-1/CO

AAD10283775-

XXXXX 10000

101 WIND 695155

CLEANING COMPOUND,

GLASS AIRCRAFT 7930PHM00005535

16 FL OZ

PB-1/BT

ICO11538117-

38405 3000

MARKAL ENAMEL OIL -

YELLOW

ENAMEL MARKER, OIL BASE,

YELLOW GLOSS 8010PHM00027171

33 FL OZ

EA-1/EA

ICP12029462-

38268 3000

103 MARKAL ENAMEL OIL - BLUE

ENAMEL MARKER, OIL BASE,

BLUE, GLOSS 8010PHM00027175

33 FL OZ

EA-1/EA

ICP11927426-

38266 3000

MARKAL ENAMEL OIL - F-

BLACK ENAMEL, BLACK, 37038, FLAT 8010PHM00030687

5 OZ BT-

1/BT

ICP119612864-

38266 10000

MARKAL ENAMEL OIL -

ORANGE

ENAMEL MARKER, OIL BASE,

ORANGE GLOSS 8010PHM00035544

33 FL OZ

EA-1/EA

ICP11927426-

38266 3000

106 BRUTE-MRK - ORANGE

BRUTE-MARK PAINT

MARKER ORANGE 8010PHM00306205

3.4 CC TU-

1/TU

ICP11927426-

38266 3000

107 MARKAL ENAMEL LIGHT BLUE MRKR LT BLUE ENAML PNT 8010PHM00525124

.33 FL OZ

TU - 1/TU

ICP11927426--

38266 3000

SEALANT, SILICONE RUBBER,

WHITE 8030PHM00077144

3 FL OZ TU -

1/TU

IAB102113877-

38268 3000

109 ABE2151 LOCTITE ABLESTIK 2151, KIT 8030PHM00319322

3 G KT -

1/KT

IAB10255359--

38266 3000

110 RF-14 RF 14 EPOXY CURING AGENT 8030PHM00326839

1 QT CN -

1/CN

IAB10255359--

38266 3000

111 RTV 8111

SS4004P & RTV8111

SILICONE ELASTOMER, KIT 8030PHM00332011

1 PT KT -

1/KT

IAB10255359--

38266 3000

112 RTV 3120

DOW CORNING 3120 RTV

SILICONE RUBBER AND F

CATALYST, KIT 8030PHM00337286

498 G KT -

1/KT

IAB10226195--

38268 3000

113 RTV 46146-10.3

DOW CORNING 3145 RTV

MIL-A-46146

ADHESIVE/SEALANT-GRAY 8040PHM00326841

10.3 OZ CA

- 1/CA

IAB10237427--

38266 300

114 A-2

ARMSTRONG A-2 RESIN,

ACTIVATOR A AND

ACTIVATOR E KIT 8040PHM00329435

82 G KT -

1/KT

IAB10255359--

38266 3000

115 TAKPAK 444

444 TAKPAK INSTANT

ADHESIVE, LOCTITE 7452

ACCELERATOR TAK PAK- KIT 8040PHM00334107

2.45 OZ KT

- 1/KT

IAB10237427--

38266 3000

116 SI5040

735869/40405, SS4004P

SILICONE PRIMER SOLUTION

AND LOCTITE SI 5040 RTV

SILICONE POTTING

COMPOUND KNO 8040PHM00337219

3.3 FL OZ

CA - 1/CA

IAB10225584--

38266

IAB10226195--

38268 6000

117 LUBE-914

LU 914 LECITHIN LUBRICANT

AEROSOL 9150PHM00318801

11 OZ CN -

1/CN

IEQ16306221--

38266 3000

118 STY-2641 STYCAST 2641 BLACK 5970000814333 QT

STYCAST 2651-40

MIL-I-16923G 2

119 9601 ID RED 13 OZ 7930014367887 BOX/12 None Identified 30

120 PERMA80011 AVIATION SEALANT 8030002206973 CONTAINER

MIL-S-45180 TY III;

MIL-S-45180 24

121 SF7452

LOCTITE SF7452

ACCLERATOR 1.75 FL OZ 8040013351402 BOTTLE None Identified 30

122 B-109 DORYL B-109 VARNISH 5970PHM00075861 55 GL None Identified 2

123 20301 ZEP POWERSOLVE 7930PHM00001749 CN None Identified 12

124 HOTZY.TUBMATE TUBMATE SOAP (HOTZY) 7930PHM00005630 100 LB None Identified 2

125 MISC MURPHYS MURPHY OIL SOAP 7930PHM00008567 EA None Identified 12

126 MISC MURPHYS MURPHY OIL SOAP 7930PHM00011342 EA None Identified 6

127 SODV16 AGE GRAY AEROSOL 8010PHM00015045 CN None Identified 30

128 73001 RUST DETROYER RED 8010PHM00023486 GAL None Identified 24

129 LOC 27150 LOCTITE 271 50 MIL BOTTLE 8030PHM00009631 BOTTLE None Identified 2

130 IB00610310 ULTRA GRAY RTV 3 OZ 8030PHM00015786 TUBE None Identified 40

131 LOC 620 LOCTITE 620 50MIL BOTTLE 8030PHM00015818 BOTTLE None Identified 4

132 91017 SIKA FLEX 8030PHM00015833 TUBE None Identified 200

133 LOC-592

LOCTITE 592 PST THREAD

SEALANT 8030PHM00024426 TUBE None Identified 2

134 STY-2762 STYCAST 2762 BLACK 8030PHM00080670 QT None Identified 2

135 17M-1 CATALYST 17M-1 8030PHM00089669 JAR

EC600298,

CATALYST 17M-1 8

136 FLEX180 HOT MELT STCKS 8040PHM00001424 22 LBS

NO SPECS

IDENTIFIED 2

137 58310 FIBER GLASS RESIN 8040PHM00002215 GAL

NO SPECS

IDENTIFIED 12

138 COPPER COPPERCOAT 8040PHM00005015 CN

NO SPECS

IDENTIFIED 18

139 HF-825 ROYCO HF-825 O-RING LUBE 9150PHM00019177 QT ROYCO HF-825 3

140 244

17925 UNTINTED WHITE

ZENTHANE PLUS 8010PHM346564 GALLON

MIL-PRF-85285E,

TY 1, CL H,

MMS420 100

141 415-NR500

HYGENALL HEXOFF BRAND

CLEANING AND

DECONTAMINATION WIPES 4235PHM00101373

7.80 POUNDS None Identified 23

142 840G1 840G1, ACETONE 6810PHM00043769 1 GALLON None Identified 8

143 8025-12 8025-12, DIESEL 911 6850PHM00006607 1 QUART None Identified 69

144 01420 01420, LPS PRESOLVE 6850PHM00014237

15 NET

OUNCE None Identified 7

145 1025

DIESEL FUEL SUPPLEMENT

+CETANE BOOST 6850PHM00016500 1 QUART None Identified 607

146 372E LEAK-TEC 16-0X 6850PHM00016938 1 GALLON None Identified 105

148 25-901 ULTRAGEL II 6850PHM00097414

4 FLUID

OUNCE None Identified 12

149 BLUE-130

AVESTA BLUEONE PICKLING

PASTE 130 6850PHM00333166

4 NET

OUNCE None Identified 20

150 045501 045501, CITRUS CLEANER 7930PHM00005428 1 QUART None Identified 2

151 T-6

T-6, TURTLE WAX SUPER

HARD SHELL CARNAUBA

LIQUID 7930PHM00014749

16 FLUID

OUNCE None Identified 30

152 HT50121Q

HYGENALL HEXOFF TOXIC

METAL DECONTAMINATING

SURFACE CLEANER AND

GENERAL PURPOSE CLEANER 7930PHM000518842 1 QUART None Identified 70

153 LS9001Q

HYGENALL HEXOFF SURFACE

CLEANER 7930PHM00511284 1 QUART None Identified 24

154 M2611

M2611-HI-TECH YELLOW

WAX-PASTE 8030PHM00032850

11 NET

OUNCE None Identified 92

155 4093509

DOW CORNING PR-1200 RTV

PRIME COAT RED 8030PHM00075910 1 PINT None Identified 19

156 1134607

LOCTITE 2047 HIGH

STRENGTH THREADLOCKER 8030PHM00094186

MILLILITER None Identified 72

157 DPCO 2100

DAPCO 2100 PRIMERLESS

FIREWALL SEALANT, FORM A

(MIXED) 8030PHM00098896

2.50 NET

OUNCE None Identified 2

158 FROM HMMS

DAPCO 2100 PRIMERLESS

FIREWALL SEALANT FORM A

MIXED 8030PHM018512802

6 NET

OUNCE None Identified 77

159 1421941

LOCTITE PL300 FOAMBOARD

CONSTRUCTION ADHESIVE 8040PHM00067286

10 FLUID

OUNCE None Identified 266

160 HYSOL 901 HYSOL901NA/B-1 8040-00-831-3403 QUART None Identified 150

161 1429908 Araldite 2014 50mL 2 part 8040993743100 Kit None Identified 24

162 DC Q1-9226 2KG Kit Q1-9226 Adhesive 2 part 8040PHM00052490 Kit None Identified 24

163 242 Loctite 242 50mL Blue Threadlocker 8030010145869 EA ASTM - D5363 3

164 Humiseal 701 Thinner 8010PHM00024117 GL 2

165 Flexbar Reprorubber 8030PHM00079487 7LB 8

166 DOWSIL 99-104

Dow Corning (DOWSIL) 93- 104 Ablative Material Kit 11 LB KIT 60

167 268 PREVAL SPRAY GAS 6830PHM00004518

2.10 NET

OUNCE None Identified 2

168 LORD 7701

Chemlok 7701 Adhesion Promoter 8040014142971 1 Gal CN None Identified 50

169 11300 FEATHER RITE BODY FILLER 8030PHM00017227 KIT/24 None Identified 100

170 58015 FIBER GLASS RESIN 8040PHM00009730 QT None Identified 100

171 Henkel EA 9390 HYSOL EA 9390 Adhesive 8040013882930 Qt BMS 8-301 100

METHYL METHACRYLATE

THINNER 8010PHM00000723 GL None Identified 100

173 METHYL METHACRYLATE 8010PHM00051034 GL None Identified 100

174 EPOCAST 50-A1/946 EPOCAST 50-A1/946 Resin) 8040PHM00014300 Qt BMS 8-201 200

175 Henkel EA-9396 50G Hyso EA-939650 adhesive 8040-01-332-8879 50 gm KT BMS 8-301 200

176 Henkel EA 9394

HYSOL EA 9394 2-PART

(QUART) 8040012885856 Qt MMM-A-132A 700

177 Henkel EA9396 Q Hysol 9396 Epoxy Green adhesive 8040-00-209-1286 1 QT KT BMS 8-301 200

178 Henkel EA9396.6MD Hysol 9396.6MD Adhesive 8040-01-470-3260 1GL KT BMS 8-301 50

179 Henkel EA9377 Hysol 9377 Liquid Shim 8040-01-470-3229 1QT KT BMS 8-338 50

180 Epocast 1619AB Epocast 1619 A&B Kit 8040013918407 1 QT Kt 50

HT3326-5-200

8030-01-521-9865

AV-Dec Self Leveling Green

200-CC 200 CC 1500

TS1228-50

8030-01-502-8649

AV-Dec Tuff Stuff Sealant 50-

CC 50 CC 500

183 F-909 Torque Seal Orange .5 oz. 500

184 419959/AS9336016 Hysol 9377 - Adhesive 1 QT KIT None Identified 200

185 EA9396

Loctite EA 9396 Green Epoxy

- Adhesive 1 Qt Kit None Identified 200

186 46081-1KIT

EPOXY FIRE RETARDANT

WHITE 2PART KIT 8010PHM00094544 KIT 200

187 700B63 DLA Intrepid Coatings 1 GAL. 200

188 36495

36495 THERMAL INSULATING

KIT (GRAY E) 8010PHM00094544 GAL 500

189 70307-12

LUBRICANT, PASTE

BLUE/BOELUBE 9150PHM00014320

12OZ. JR-

1/JR currently stocking 500

190 70200-13

LUBICANT, METAL

WORKING/BOELUBE 9150PHM00016643 1.6OZ currently stocking 1000

191 A00123

MISTY GLASS CLEANER

A00123 7930PHM00005424 CAN currently stocking 500

192 RTV 46146 -3OZ

DOW CORNING 3145 RTV

MIL-A-46146

ADHESIVE/SEALANT-GRAY 8040PHM00327838

3 OZ TU -

1/TU

IAB10255359--

38266 100

193 PERMABOND TA4246 (P-6190)

PERMABOND TA4246 (P-

6190) 8040PHM00084765 65ml Bottle currently stocking 100

194 CB200-40 8.04001E+12 Kit None Identified 500

195 A4 METAL SET

METALFILL ADHESIVE AND

HARDNER 8040009447292 6OZ 100

196 10448 REZTORE TOPICAL ANTISTAT 6850PHM00005269 2.5 GALLON None Identified 500

197 37038

PAINT, BLACK FLAT LACQUER

CHIP #37038 TT-L-20 GL 8010006647651 1 GAL TT-L-20 GL 200

APPENDIX C

SAFETY, FIRE PROTECTION AND HEALTH

SPECIFICATION

INDUSTRIAL SAFETY REQUIREMENTS

OGDEN AIR LOGISTICS COMPLEX

UNITED STATES AIR FORCE

HILL AIR FORCE BASE, UTAH 84056

Aircraft Coatings & Sealants

7 April 2022

OO-ALC/SE

Control Number: KZ220401

SECTION I - GENERAL REQUIREMENTS

A. Safety Program Requirements.

The contractor will implement a safety program that ensures protection of Government personnel and property. The program will consist of, as a minimum:

1. Mishap reporting, as defined in paragraph B1 below.

2. Routine and recurring surveillance to ensure the safety requirements of this contract are enforced.

3. Identification of segregated work site locations for operations that cannot be co-mingled with general industrial operations and the process for ACO approval of operations and changes at these specific sites.

4. All contractor personnel shall be trained and qualified to perform their duties safely.

5. The contractor shall include a clause in all subcontracts requiring the subcontractors to comply with the safety provisions of this contract, as applicable.

B. Mishap Notification

1. The contractor shall notify the OO-ALC/SE workflow at OO-ALC.SE.Workflow@us.af.mil or the Hill AFB Command Post (801-777-3007) after normal duty hours, and the designated

Government Representative (GR), i.e., the ACO, PCO, or DCMA COR (Contracting Officer's

Representative) within one (1) hour of all mishaps or incidents at or exceeding $2,000 (material

+ labor) in damage to DOD property entrusted by this contract, even if the government is wholly or partially reimbursed. This notification requirement shall also include physiological mishaps/incidents. A written or email copy of the mishap/incident notification shall be sent within three calendar days to the GR, who will forward it to OO-ALC/SE. For information not available at the time of initial notification, the contractor shall provide the remaining information no later than 20 calendar days after the mishap, unless extended by the ACO.

Mishap notifications shall contain, as a minimum, the following information:

(a) Contract, Contract Number, Name and Title of Person(s) Reporting

(b) Date, Time and exact location of accident/incident

(c) Brief Narrative of accident/incident (Events leading to accident/incident)

(d) Cause of accident/incident, if known

(e) Estimated cost of accident/incident (material and labor to repair/replace)

(f) Nomenclature of equipment and personnel involved in accident/incident

(g) Corrective actions (taken or proposed)

(h) Other pertinent information

2. The contractor shall cooperate with any and all government mishap investigations.

Additionally if requested by government personnel or designated government representative

(GR), i.e., the ACO, PCO, or DCMA COR (Contract Officers Representative), the contractor shall immediately secure the mishap scene/damaged property and impound pertinent maintenance and training records, until released by safety investigators.

3. The contractor shall provide copies of contractor data related to mishaps, such as contractor analyses, test reports, summaries of investigations, etc. as necessary to support the government investigation.

4. The contractor shall support and comply with the safety investigation and reporting requirements of DAFI91-204 or DAFI91-204_AFMCSUP.

C. General Safety Requirements:

The contractor is solely responsible for compliance with all federal, state and local laws, the

Occupational, Safety and Health Act (OSHA) (Public Law 91-596) and the resulting standards, OSHA Standards 29 CFR 1910 and 1926, as applicable, and the protection of their employees. Additionally, the contractor is responsible for the safety and health of all subcontractor employees. All documents required as a result of OSHA 29 CFR 1910 and

1926 regulations, (i.e. certifications, training, respiratory protection program, workplace hazard assessments), shall be made available to the COR upon request.

The contractor shall ensure assigned personnel are adequately trained and qualified for the task being performed. Brief all personnel on the hazards involved with operations and applicable precautions to be taken. Should unidentified hazards arise, cease operations until actions are taken to eliminate or mitigate hazards to safe levels.

Contractor personnel must receive Explosive Safety Awareness Training if their duties require entry into the Explosive Clear Zone. This training will be provided by the OO-ALC Safety

Office. Contact Tom Caygle at 586-0081.

A Risk Assessment will be required prior to any work being accomplished, if munitions will remain in the facility.

Compliance with OSHA and other applicable laws and regulations for the protection of contractor employees is exclusively the obligation of the contractor. Note: The government shall assume no liability or responsibility for the contractor's compliance or non-compliance with such requirements. The contractor shall furnish to each of his/her employees a place of employment, which is free from recognized hazards. The contractor shall brief his/her http://www.osha.gov/pls/oshaweb/owasrch.search_form?p_doc_type=STANDARDS&p_toc_level=0 employees on the safety requirements of this contract and on hazards associated with prescribed tasks. The contractor is responsible for compliance with OSHA Public Law and the resultant standards identified within. In addition, the contractor is required to flow down the safety requirements/specification to all subcontractors. This applies to Federal Acquisition Regulation

(FAR) 12 commercial acquisitions as well. This contract shall in no way require persons to work in surroundings or under working conditions which are unsafe or dangerous to their health.

The contractor must coordinate and perform work so as not to impact the safety of government employees or cause damage to government property. This requires providing personnel with protective equipment and associated safety equipment as may be necessary. The contractor must also protect personnel from hazards generated by the work. If the contractor employs

BILINGUAL speaking employees, they must post bilingual signs and have written procedures for specific tasks in applicable languages.

SECTION II – SPECIFIC REQUIREMENTS

PEDESTRIAN CROSSWALKS: All contractor personnel are required to use the closest crosswalk, or traffic controlled intersection when crossing the road. Pedestrians must look both ways to ensure the coast is clear before stepping out into the crosswalk.

Pedestrians DO NOT have the right of way unless they are already in the crosswalk.

Contractor vehicle operators have the same responsibilities as pedestrians, to share the road and mutually observe and yield to pedestrians.

MOTOR VEHICLES: Contractor shall comply with the standards in: DoD Directive

5525.4, Enforcement of State Traffic Laws on DoD Installations", Nov 2, 1981, Para 3-4;

DODI 6055.4, DoD Traffic Safety Program, 20 Jul 99; AFI 91-207, USAF Traffic Safety

Program, 22 May 07; and AFI 91-207 AFMC SUP1, The US Air Force Traffic Safety

Program, 1 Oct 07. Each applies to all persons at any time on an Air Force Installation and includes all leased, owned, or privatized property including housing areas. In addition: AFI 13-213, Airfield Management, applies to all contractors, sub-contractors, vendors, commercial delivery companies, and all other private business vehicles who operate anywhere on Hill Air Force Base, including the airfield (to include the industrial areas and any buildings or hangars located upon the airfield) in support of their mission.

HOUSEKEEPING: Housekeeping shall be conducted according to the requirements in

OSHA Standard 29 CFR 1910.141. CLEAN AS YOU GO will be enforced.

Element/Requirement Referenced Benchmark

Operational Reporting (OPREP) Appendix C, Section I

AFMAN 10-206

Facility Prevention and Protection NFPA 13, 70, & 72

NFPA 409/410

DAFMAN91-203 Chapters 6, Handling, Storage and use of Flammable/ NFPA 30, 33

Hazardous Material Management AFI 32-7086

HAFBSUP 1

Flammables and Combustibles DAFMAN91-203

Chapter 22