SOW_2126406Y6136562002_Singapore_ Diver Services Across 4 154 FRCs.docx
DOCX document 17 KB Posted
- Attached to
- Notice of Intent Sole Source
- Solicitation number
- 70Z04026Q60115Y00
About this file
This is a Statement of Work for underwater diving services supporting the United States Coast Guard's Fast Response Cutters located in Singapore. The contractor shall provide certified divers, labor, and equipment to install and remove bolt-on cofferdam dive plates on four USCG vessels at 25B Loyang Cres, Singapore 508988. The scope includes three primary tasks: installing a USCG-provided cofferdam dive plate to create a watertight seal, providing standby support while USCG personnel replace a transducer, and removing the cofferdam upon completion. The contractor must also return the equipment to the designated USCG Point of Contact on-site. The period of performance spans July 27 through September 4, with specific dates and times to be coordinated directly with USCG personnel.
The total contract value is $36,000.00, calculated at $9,000.00 per cutter for four cutters, based on a quotation reference TOPS-USCG-010. This is a firm-fixed-price sole source procurement awarded to Toll Remote Logistics USA Inc. under FAR 6.302-1, with the justification that this vendor is the sole source capable of meeting the requirement. The USCG will furnish all four cofferdam dive plates with necessary bolting hardware. Primary coordination will occur with LCDR Justin Bixler at (202) 695-4169, with LT Jeff Poe as the alternate point of contact.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| JOTFOC Signed_2126406Y6136562002_Singapore_ Diver Services Across 4 154 FRCs.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work: Diver Services for USCG Fast Response Cutters
1.0 Background
This Statement of Work (SOW) outlines the requirements for underwater diving services for four (4) United States Coast Guard (USCG) Fast Response Cutters. The work involves the installation and subsequent removal of a USCG-provided cofferdam dive plate to facilitate the replacement of a transducer on each vessel.
2.0 Scope of Work
The contractor shall provide all necessary labor, equipment, and certified divers to perform the following tasks for each of the four cutters:
· Task 1: Cofferdam Installation: Install one (1) bolt-on cofferdam dive plate, which will be provided by the USCG at the work site. The installation must create a watertight seal to allow for work in a dry environment.
· Task 2: Support for Transducer Replacement: Stand by while USCG personnel replace the transducer.
· Task 3: Cofferdam Removal: Upon completion of the transducer replacement by the USCG, remove the cofferdam dive plate.
· Task 4: Return of Equipment: Return the cofferdam dive plate to the designated USCG Point of Contact (POC) on-site.
3.0 Location of Work
The work will be performed on two cutters located in the water at:
25B Loyang Cres, Singapore 508988 (Heavy Industrial Zone, Changi District)
4.0 Period of Performance
The services are to be performed between 27 July thru 04 September. The final, specific date and time for the work will be coordinated directly with the USCG POCs.
5.0 Government-Furnished Equipment
The USCG will provide the following equipment:
· Four (4) cofferdam dive plates with all necessary bolting hardware.
6.0 Key Personnel / Points of Contact (POC)
Coordination of work schedules and on-site activities shall be made with the following USCG personnel:
· Primary POC: LCDR Justin Bixler, (202) 695-4169
· Alternate POC: LT Jeff Poe, +1 612 701 7379
7.0 Cost
As per the provided quotation (Reference: TOPS-USCG-010), the cost is as follows:
· Cost per cutter: $9,000.00
· Total Cost for four cutters: $36,000.00
File details come from the government source that posted it. Updated .