SOW 20-0E9 TLP POApproved 14May2020.pdf

STATEMENT OF WORK (SOW)

DMEA 20-0E9

14 May 2020

1.0 SCOPE:

1.1 TITLE: Transmission Line Pulse (TLP) Tester

1.2 APPLICABILITY: DMEA Electrostatic Discharge (ESD) TLP Testing

1.3 BACKGROUND: Microelectronics that are used in military application must withstand harsh environments that may create intense electrostatic fields. DMEA has the need to create ESD protection structures at wafer level that will provide the warfighter with microelectronics that can withstand these fields. The use of a Transmission Line Pulse (TLP) test system reduces the cost and design time of these protection structures. DMEA does not currently have a TLP tester.

1.4 PURPOSE: The purpose of this task is to purchase a Transmission Line Pulse (TLP) test system for the purpose of wafer level and packaged part testing.

2.0 REFERENCED GOVERNMENT PROVIDED RESOURCES:

2.5 GOVERNMENT FURNISHED FACILITIES/ACCESS:

Facility/Access Date DMEA Facility, 4234 54th St., McClellan, CA 95652-2100 As awarded of the contract

3.0 REQUIREMENTS:

3.1 GENERAL REQUIREMENTS:

3.1.1 RESERVED

3.2 PROGRAM MANAGEMENT: NONE

3.3 TASK REQUIREMENTS: The contractor shall provide one (1) TLP test system with the following HARDWARE and SPECIFICATIONS:

3.3.1 HARDWARE:

1) Integrated PC with keyboard, mouse and monitor

2) Integrated Keithley 2400 source meter or equivalent for leakage measurement

3) Fixture to mount 48 pin dual in-line package (DIP) part for package level test

4) Tektronix Oscilloscope, Model# TDS3054C, Four (4) Channel, 500MHz, P/N 06-001-1000 or equivalent

5) Kelvin Transmission Domain Reflectometry Overlap measurement kit

3.3.2 SPECIFICATIONS:

1) 40A Max into short circuit, 2kV Max into open circuit

2) 100ns pulse width

3) 200pS rise time and 2nS rise time filter

4) Time Domain Reflection with Overlapped Pulses (TDR-O)

5) Time Domain Reflection with Separated Pulses (TDR-S)

6) Size: 22 in. (Width) x 32 in. (Depth) x 32 in. (Height)

3.3.3 SOFTWARE: Prior to shipment, the contractor shall provide but not limited to the following information:

1) Serial number, make, and model of Integrated PC

2) List all of the software including:

a. Name of software

b. Version

c. The developer/manufacturer of

d. Country of origin

e. License type (Commercial Paid, Commercial Paid- Floating, Free and Open Source, Free-Not

Open Source)

3) List of any type of volatile and non-volatile memory (e.g. hard drives, flash storage). The serial number, make, and model for each entry shall be provided.

3.3.4 SHIPPING and INSTALLATION: The contractor shall ship, install, and provide training at the location described in section 2.5. The contractor shall calibrate the TLP test system prior to shipment. The contractor shall provide a calibration certification.

3.3.5 SECURITY: The contractor shall provide advance notification prior to conducting any onsite service. A forty-eight (48) hour minimum notice during normal business hours shall be given. All contractor work at DMEA shall be performed by US citizens unless an exception is granted, in writing, by DMEA; after hours and/or weekend work may be required for excepted personnel. Prior to being allowed entry, contractor personnel shall provide proof of citizenship in accordance with the DMEA visitor approval process in effect at the time the visit is requested. During periods of exceptionally heightened security, additional advance notice background investigations of contractor personnel may be required prior to gaining entry into DMEA.

4.0 POINTS OF CONTACT:

DMEA/ MEBA/ Electronics Engineer:

Name:

Address: 4234 54th Street McClellan, CA 95652-2100 Voice:

E-Mail:

DMEA/ MEBA/ Contract Officer Representative Name:

Address: 4234 54th Street McClellan, CA 95652-2100 Voice:

E-Mail: