SOW -1.pdf
PDF 254 KB Posted
- Attached to
- N4215825QE080 - RED TAPE TESTING Federal contract opportunity
- Solicitation number
- N4215825QE080
About this file
This document is a Statement of Work (SOW) for Tape Testing Service for the Norfolk Naval Shipyard (NNSY). The SOW requires a contractor to perform testing on ten different tape samples across multiple contract/NSN numbers, with work to be conducted at the contractor's facility. The testing involves evaluating red tapes for specific characteristics using standardized ASTM testing procedures, including measurements for adhesion to steel and backing, quick stick, elongation, tensile strength, curling property, water penetration rate, and unwind properties. Each characteristic has precise value requirements and corresponding test methods, with tolerances typically ranging within +/- 10%. The period of performance begins upon award via email from NNSY Purchasing Agent (Code 411), with the contractor required to segregate and maintain identification of NNSY materials separately from other materials during testing.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| TECHNICAL CAPABILITIES STATEMENT.pdf | ||
| SOL- SF 1449 - N4215825QE080.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Tape Testing Service Statement of Work
The Contractor shall provide aforementioned service per the following requirements:
A. The period of performance begins when awarded and ends when the work is complete.
A1. The contract is awarded via e-mail by the Norfolk Naval Shipyard (NNSY) Purchasing Agent, Code 411. The work of this Contract shall not commence until after the official e-mail notification has been received by the Contractor.
B. Work shall be performed at the Contractor's facility. The Contractor shall segregate NNSY's material from any other materials and shall maintain NNSY identification tags or markings provided with subject material.
Lot is equal to ten (10) rolls of tape identified as follows:
Sample 1: CONTRACT/NSN (N00104-09-C-BA53/1H 5640-01-566-7386 X3)
Sample 2: CONTRACT/NSN (N00104-07-D-7002/1H 4470-01-477-9416 X3)
Sample 3: CONTRACT/NSN (N00104-12-P-VK29/1H 5640-01-566-7387 X3
Sample 4: CONTRACT/NSN (N00104-12-P-BG90/1H 4470-01-477-9416 X3)
Sample 5: CONTRACT / NSN (N00104-13-P-BJ38/1H 5640-01-566-7384 X3
Sample 6: CONTRACT/NSN (N00104-13-C-BA07/1H 4470-01-477-9416 X3)
Sample 7: CONTRACT/NSN (N00104-14-P-BF28/1H 5640-01-566-7384 X3)
Sample 8: CONTRACT/NSN (N00104-14-P-BU91/1H 4470-01-477-9416 X3)
Sample 9: CONTRACT/NSN (N00104-17-P-EF29/1H 5640-01-566-7387 X3)
Sample 10: CONTRACT/NSN (N00104-17-BY37/1H 5640-01-477-9406 X3)
E. The Contractor shall test subject red tapes to the requirements of Table 1 below
TABLE 1
Characteristics Value Testing Procedure
Adhesion to Steel 55 Ounces per Inch (+/- 10%) ASTM D 3330
Test Method A
Adhesion to Backing 47 Ounces per Inch (+/- 10%) ASTM D 3330
Test Method B
Quick Stick 27 Ounces per Inch (+/- 10%) PSTC
Test Method 5-EA
Elongation (Maximum) 7.5% ASTM D 3759
Tensile Strength (Minimum) 40 Pounds per Inch
(Longitudinal)
ASTM D 3759
Curling Property (Maximum) 2.0 Inches ASTM D 3813
Water Penetration Rate (Maximum) 5.0 Grams per 100 Inches ASTM D 3833
Unwind 3.5 Pounds per Inch (=/- 10%) ASTM D 3811
File details come from the government source that posted it. Updated .