South Post LED Lighting Equipment Specifications - R2 06_28_2022.pdf

Project No. PWF-01801-0P Purchase LED Lighting & Associated Equipment

USAG Fort Devens Devens MA 01434

SPECIFICATIONS

LED LIGHTING AND ASSOCIATED EQUIPMENT

SOUTH POST LED LIGHTING

PART 1

1.1 GENERAL

Lighting systems in various buildings require lifecycle replacement to more efficient LED systems. The contractor shall provide the LED lighting fixtures, fixture integrated controls, standalone occupancy sensor controls, LED lamps, and start-up support as listed here within. These items are being purchased as a lot as listed on the Bill of Materials.

This is a material-only project, all installation will be performed by Fort

Devens in-house labor. Equipment needed to install the fixtures is limited to those items specifically identified in the model # within the bill of materials.

Product 2.2.3 is eligible for distributor-level incentives through the utility sponsored MassSave Program, as the installation location is served National

Grid Electric. Fort Devens shall provide the necessary National Grid account information upon request.

1.2 SUBMITTALS

Product Data

Prior to ordering equipment, submit manufacturer product and performance data, installation instructions, operations and maintenance instructions, and warranties for each item listed in the Bill of

Materials. Owner shall complete submittal review within 5 business days of submission.

PART 2 PRODUCTS

2.1 General Equipment Requirements

All new LED fixtures, fixture retrofit kits, and LED lamps are required to be listed by the Design Lights Consortium,and must meet DLC

Technical requirements for Indoor luminaires or Indoor Retrofit Kits.

All LED fixtures, fixture integrated controls, and LED lamps must come with a minimum manufacturer’s equipment warranty of 5 years, and shall be UL Listed. The warranty is for materials only and does not include labor for replacement of defective product.

2.2 Bill of Materials (LOT)

Item Qty Manufacturer and Model #

2.2.1 41

METALUX BAA-VHB-24-W-UNV-L840-CD-SVPD3-U-HBAYC-CHAIN/SET/U

HIGH BAY LED FIXTURE WITH INTEGRATED OCCUPANCY SENSOR AND

DIMMING CONTROL (OR EQUAL)

2.2.2 16

METALUX BAA-VHB-24-W-UNV-L840-CD-SVPD3-U-VHB-SPM HIGH BAY

LED FIXTURE WITH INTEGRATED OCCUPANCY SENSOR AND DIMMING

CONTROL (OR EQUAL)

2.2.3 16

METALUX BAA-SSLED-LD5-24-M-UNV-L840-CD-2-TCB/SHK=PC3/120-

SVPD3-U HIGH BAY LED FIXTURE WITH INTEGRATED OCCUPANCY

SENSOR AND DIMMING CONTROL (OR EQUAL)

2.2.4 4

COOPER LIGHTING ISHH-01 INTEGRATED SENSOR PROGRAMMING REMOTE

(OR EQUAL)

2.2.5 8

METALUX TAA-24-FPX-47-L840-HE LED FLAT PANEL FIXTURE 2’X 4’,

40K (OR EQUAL)

2.2.6 2

4WSNLED-LD4-44SL-F-UNV-L840-CD1-U WRAP-AROUND LED FIXTURE

(OR EQUAL)

2.2.7 1 LUMARK AXCS3ARL EXTERIOR LED FIXTURE (OR EQUAL)

2.2.8 220 ARCHIPLELAGO LIGHTING LT8F41541UE 4’ T8 LED Lamp (OR EQUAL)

2.2.9 10 ARCHIPLELAGO LIGHTING LT8F41541UE 2’ T8 LED Lamp (OR EQUAL)

2.2.10 1

WATTSTOPPER DT-300-U (DUAL TECHNOLOGY CELING MOUNT OCCUPANCY

SENSOR), WATTSTOPPER BZ-50-U (RELAY PACK) (OR EQUAL)

2.2.11 1

WATTSTOPER DW-100-W-U WALL SWITCH DUAL TECH OCC SENSOR (OR

EQUAL)

2.2.12 1

SIX (6) HOURS ON-SITE TRAINING IN TWO (2) THREE (3) HOUR

SESSIONS ON CONFIGURATION OF FIXTURE INTEGRATED CONTROLS

INCLUDED IN ITEMS 2.2.1, 2.2.2, 2.2.3, AND 2.2.4. TRAINING

SHALL BE BY MANUFACTURER’S REPRESENTATIVES WITH DETAILED

KNOWLEDGE OF THE PROJECT CONTROLS.

2.2.1 Linear High-Bay LED Lighting Fixtures and associated equipment

LED light fixture designed for high-bay application. Fixture requirements include:

Buy American Act preferred cULus listed for damp locations

-40°C to 55°C ambient environments with 0-10V drivers

RoHS compliant, and LED modules comply with IESNA LM-79 and LM-80 standards

DesignLights Consortium® Qualified and classified for DLC Standard and DLC Premium

24,000 lumen package, minimum 80 Color Rendering Index (CRI), 4000K

Correlated Color Temperature (CCT)

Chain mounting kit

Integrated occupancy and daylight dimming sensor with 1200 sq ft coverage, suitable for 15-40’ mounting height. Integrated controls shall be capable of configuration via a hand-held remote control.

Controls shall be capable of high-level trim, daylight dimming, and bi-level dimming based on occupancy. Output levels for occupied, standby, and unoccupied shall be custom set using the remote configurator. No network lighting controls are permitted.

Minimum 5-year manufacturer’s material warranty

2.2.2 Linear High Bay LED Lighting Fixtures and associated equipment

LED light fixture designed for high-bay application. Fixture requirements include:

Buy American Act compliant

-40°C to 55°C ambient environments with 0-10V drivers

RoHS compliant, and LED modules comply with IESNA LM-79 and LM-80 standards

DesignLights Consortium® Qualified and classified for DLC Standard and DLC Premium

24,000 lumen package, minimum 80 Color Rendering Index (CRI), 4000K

Correlated Color Temperature (CCT)

Single mounting point kit

Integrated occupancy and daylight dimming sensor with 1200 sq ft coverage, suitable for 15-40’ mounting height. Integrated controls shall be capable of configuration via a hand-held remote control.

Controls shall be capable of high-level trim at customized level,and bi-level dimming based on occupancy. Output levels for occupied, standby, and unoccupied shall be custom set using the remote configurator.

2.2.3 Round High Bay LED Lighting Fixtures and associated equipment

Buy American Act compliant

-40°C to 55°C ambient environments with 0-10V drivers

RoHS compliant, and LED modules comply with IESNA LM-79 and LM-80 standards

DesignLights Consortium® Qualified and classified for DLC Standard and DLC Premium

24,000 lumen package, minimum 80 Color Rendering Index (CRI), 4000K

Correlated Color Temperature (CCT)

Single mounting point kit

Integrated occupancy and daylight dimming sensor with 1200 sq ft coverage, suitable for 15-40’ mounting height. Integrated controls shall be capable of configuration via a hand-held remote control.

Controls shall be capable of high-level trim, daylight dimming, and bi-level dimming based on occupancy. Output levels for occupied, standby, and unoccupied shall be custom set using the remote configurator.

This line item is eligible for distributor-level incentives through the utility sponsored MassSave Program, as the installation location is served

National Grid Electric. Fort Devens will supply all required electric account information upon request.

2.2.4 Handheld Remote Control for configuration of fixture integrated controls

Handheld infrared remote controller for programming of integral SVPD3 occupancy and dimming controllers on high bay fixtures in items 2.2.1 through

Capabilities must include the ability to set:

Occ sensor delays and sensitivity

Daylight dimming control

Occupied, standby, and unoccupied light level settings, time delays

Network lighting control systems are not acceptable.

2.2.5 Flat Panel LED Fixture

TAA compliant

UL listed

DesignLights Consortium® Qualified and classified for DLC Standard and DLC Premium

4700 lumen, 4000K CCT, minimum 80% CRI lumen package

Fixture depth less than 3”

Minimum 5-year material warranty

2.2.6 LED Wrap Around Fixture

TAA compliant

UL listed, suitable for damp location

Cold-rolled steel construction for fixture chassis

DesignLights Consortium® Qualified and classified for DLC Standard a

4400 lumen, 4000K CCT, minimum 80% CRI lumen package

2.2.7 Wall mount exterior LED floodlight

Buy American Act Compliant

UL listed for wet locations

Cast aluminum construction

DesignLights Consortium® Qualified and classified for DLC Standard and DLC Premium

Refractive lens

Minimum of 140 lumens per watt

Equipped with integral photocell for dusk to dawn control

Knuckle mounting with ½” NPT threaded pipe

2.2.8 T8 LED lamp, ballast bypass, 4’

Compatible to Ballast (UL-A) and Bypass (UL-B) T8 retrofit applications, with UL0B being either single or double ended.

Compatible with both shunted and non-shunted lamp-holders

DesignLights Consortium® Qualified and classified for DLC Standard

Suitable for enclosed, dry, and damp locations

4100K CCT, minimum 80% CRI, minimum 1200 lumens

140 minimum lumens per watt

2.2.9 T8 LED lamp, ballast bypass, 2’

Compatible to Ballast (UL-A) and Bypass (UL-B) T8 retrofit applications, with UL-B being either single or double ended.

Compatible with both shunted and non-shunted lamp-holders

DesignLights Consortium® Qualified and classified for DLC Standard

Suitable for enclosed, dry, and damp locations

4100K CCT, minimum 80% CRI, minimum 1200 lumens

140 minimum lumens per watt

2.2.10 Ceiling mount occupancy sensor, dual technology, with relay

Buy American Act Compliant (occupancy sensor only)

360-degree sensing utilizing both ultrasonic and passive infrared (PIR) occupancy detection.

Coverage area up to 1000 square feet

Adjustable sensitivity, time delay

Walk-through mode with shorter delay

Auxiliary contracts for use

Relay pack for switching of line voltage loads, universal line voltage

2.2.11 Wall-mount occupancy sensor, dual technology

Buy American Act Compliant (occupancy sensor only)

180-degree sensing utilizing both ultrasonic and passive infrared (PIR) occupancy detection.

Adjustable sensitivity, time delay

Walk-through mode with shorter delay

Auto-on and manual-on operating mode options

2.2.12 Factory Trained Lighting Controls Start-up Support

Upon completion of the installation by others, provide two (2) sessions of up to three (3) hours each of training/start-up support for the fixture integrated controls in items 2.2.1, 2.2.2, 2.2.3, and 2.2.4.

Training/support will be provided by fixture manufacturer representatives for Massachusetts with detailed knowledge of the controls’ configuration and operation.

Fort Devens will coordinate the first visit after new high-bay fixtures have been installed and powered in the first building; the second visit will be arranged after the remaining two buildings are completed.

-- End of Section --