Sources Sought Technical Specifications.pdf

PDF 577 KB Posted

Attached to
NPDES Lab (Oils/Grease/Chemicals/Water) Testing Federal contract opportunity
Solicitation number
W912EF21RSS14
Issued by
Department of the Army Corps of Engineers Engineering District Walla Walla

View the file

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

1. Laboratory Certification

The laboratory shall have a current laboratory accreditation including either the State of Oregon Environmental Laboratory Accreditation Program or the Washington State Department of Ecology Environmental Laboratory Accreditation Program for the analytes required in the task. If the laboratory cannot conduct a specific analytical process they may contract with another laboratory to perform the analysis. That laboratory must meet this requirement.

2. Task

The laboratory will conduct the following analysis for each outfall at McNary:

Parameter Method/Range Sensitivity

(MDL)

PQL Precision Accuracy Calibration Method

Oil and Grease

EPA 1664A 0.5 1 18% 79-114% Balance calibration

Parameter Container Type Volume Required Preservation Holding Time

Oil and grease AG 1liter None, Cool to ≤4 ̊C 28 days

AG= amber glass

Parameter Approximate Quantity

Cost Total

Oil and grease 2 Weekly 24 Quarterly

Total: 24

The laboratory will conduct the following analysis for each outfall at Ice Harbor:

PQL Precision Accuracy Calibration Method

TSS EPA 160.2 NA 1 NA NA Balance calibration

Oil and

TSS HDPE 1liter None, Cool to ≤4 ̊C 7 days

HDPE = high density polyethylene, AG= amber glass

Cost Total

TSS 1 Quarterly 1 Quarterly

Oil and grease 21 Weekly 252 Quarterly

Total: 253

The laboratory will conduct the following analysis for each outfall at Lower Monumental:

PQL Precision Accuracy Calibration Method

TSS EPA 160.2 NA 1 NA NA Balance calibration

Oil and

TSS HDPE 1liter None, Cool to ≤4 ̊C 7 days

Cost Total

TSS 1 Quarter 1 Quarterly

Oil and grease 12 Weekly 144 Quarterly

Total: 145

The laboratory will conduct the following analysis for each outfall at Little Goose:

PQL Precision Accuracy Calibration Method

COD EPA 410.4 NA 5 20% 80-120% Laboratory blank

TSS EPA 160.2 NA 1 NA NA Balance calibration

Oil and

COD HDPE 500 mL H2SO4, Cool to ≤4 ̊C

28 days

TSS HDPE 1liter None, Cool to ≤4 ̊C 7 days

Cost Total

COD 2 Quarter 2 Quarterly

TSS 1 Quarter 1 Quarterly

Oil and grease 15 Weekly 180 Quarterly

Total: 183

The laboratory will conduct the following analysis for each outfall at Lower Granite:

PQL Precision Accuracy Calibration Method

Oil and

AG= amber glass, Cost Total

Oil and grease 12 Weekly 144 Quarterly

Total: 144

3. Supplies

The analytical laboratory will provide enough sample containers to conduct the approximate quantity of samples detailed in the table above. Enough coolers and freezer packs shall be prepared for pickup to sufficiently pack all sets of samples along with chain of custody forms. There will be enough room to add additional ice packs in the coolers to maintain temperature storage requirements. The laboratory will provide specific packaging and handling instructions for the containers and each sample container will labeled for the test it will be used for. Any preservatives will be described. Coolers will be labeled for proper DOT shipment.

File details come from the government source that posted it. Updated .