Sources Sought_SPRRA2-26-R-0007.pdf

Sources Sought Notice

Class Code: Multiple NSNs NAICS Code: Multiple NSNs Subject: Multiple NSNs Solicitation Number: SPRRA2-26-R-0007 Set Aside Code: N/A Response Date: 3 Days Place of Performance:

CAGE 05716

RAYTHEON COMPANY

350 LOWELL ST.

ANDOVER, MA 01810-4400

THERE IS NO SOLICITATION AVAILABLE AT THIS TIME. REQUESTS FOR A SOLICITATION

WILL NOT RECEIVE A RESPONSE.

This Sources Sought Synopsis (SSS) is in support of Market Research being conducted by the Defense Logistics Agency to identify potential manufacturing/supply sources. The proposed North American Industry Classification Systems (NAICS) Code and the corresponding Size Standard of number of employees is in the table below.

This SSS is to notify companies that the Defense Logistics Agency, Redstone Arsenal, Alabama, is seeking qualified sources for the acquisition of Multiple NSNs (see table below) in support of the M-D6 (PATRIOT) weapon system.

NSN P/N NOUN NAICS SIZE AMC

EXP

CTRL

6625-01-525-7028 11481078 TEST SET,ELECTRICAL 334412 750 4B YES

1430-01-089-4574 11444133 VENTILATOR,AIR,ASSY 336419 1050 3C YES

5998-01-419-2240 11476079 CIRCUIT CARD ASSEMB 334412 750 3N YES

5998-01-719-1575 13646234-8 CIRCUIT CARD ASSEMB 334412 750 3C YES

1430-01-648-3826 13657697 MICROWAVE DEVICE AS 336419 1050 4C YES

1430-01-369-7898 11467730 LOGIC CONTROL SUBAS 336419 1050 4N YES

5998-01-234-4645 11464952 CIRCUIT CARD ASSEMB 334412 750 3C YES

5998-01-727-2708 13742486-1

CIRCUIT CARD

ASSEMBLY

334412 750 4C YES

5998-01-719-1580 13646234-7 CIRCUIT CARD ASSEMB 334412 750 4C YES

1430-01-444-4234 11477847 PANEL,CONTROL,ELECT 336419 1050 4C YES

5998-01-357-7926 11467693 CIRCUIT CARD ASSEMB 334412 750 3C YES

5998-01-411-3032 11472036 CIRCUIT CARD ASSEMB 334412 750 3C YES

5895-01-651-8986 CB9979

CASE,ELECTRONIC

COMMUNICATIONS

EQUIPMENT

336413 1250 4N YES

5950-01-091-7169 11453682 TRANSFORMER ASSEMBL 334416 550 3C YES

5985-01-632-4902 11455763-2 ANTENNA ELEMENT 336413 1250 4N YES

(*CB9979 ANTENNA ELEMENT CASE must be procured with 11455763-2 ANTENNA

ELEMENT)

The AMSC codes can be referenced in the table above. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302-l(a)(2) having only one responsible source (Sole Source).

This part must be acquired from the manufacturing source specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained. As a result, this acquisition is currently being procured under Federal Acquisition Regulation (FAR) 6.302- 1(a)(1) having only one responsible source (Sole Source).

CAGE CODE: 05716

RAYTHEON COMPANY

350 Lowell ST.

Andover, Massachusetts 01810-4400

Firms that possess the ability and can produce the required item(s) described above are encouraged to identify themselves. Contractors are encouraged to seek source approval to compete for future solicitations by accessing the website:

http://amcomdmz.redstone.army.mil/casl_cmo/casldba.casl_cmo_samsart

Then click on AMCOM Spare Parts Manufacturer or Distributor SAR. The contractor shall be capable of successfully performing and complying with all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at the time of a contract award.

The contractor shall be capable of successfully performing and complying with all special requirements in accordance with the terms and conditions set forth in the solicitation annotated above, at the unit prices established at the time of a contract award. The contractor will be responsible for recurring and nonrecurring engineering services associated with becoming a qualified source. The contractor will also be responsible for all aspects of the manufacturing/production process, including but not limited to supply chain management, logistics, forecasting of parts, long-lead parts procurement, material forecasting, obsolescence issues and final delivery of assets as well as all additional costs incurred resulting from contract performance.

Applicable AMC Codes:

3C Acquire, for the second or subsequent time, directly from the actual manufacturer. This part requires engineering source approval by the design control activity to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s).

3N Acquire, for the second or subsequent time, directly from the actual manufacturer. Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities.

4B Acquired for the first time, directly from the actual manufacturer.

This part must be acquired from a manufacturing source(s) specified on a source control or selected item drawing as defined by the current version of DoD-STD-100. Suitable technical data, Government data rights, or manufacturing knowledge are not available to permit acquisition from other sources, nor qualification testing of another part, nor use of a second source part in the intended application. Although, by DoD-STD-100 definition, altered and selected items shall have an adequate technical data package, data review discloses that required data or data rights are not in Government possession and cannot be economically obtained.

4C Acquired for the first time, directly from the actual manufacturer.

This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.

4N Acquire, for the first time, directly from the actual manufacturer.

Manufacture of this part requires special test and/or inspection facilities to determine and maintain ultra-precision quality for its function or system integrity. Substantiation and inspection of the precision or quality cannot be accomplished without such specialized test or inspection facilities.

DISCLAIMER: THIS SSS IS ISSUED SOLELY FOR INFORMATIONAL AND PLANNING

PURPOSES. IT DOES NOT CONSTITUTE A SOLICITATION (REQUEST FOR PROPOSAL OR

REQUEST FOR QUOTATION) OR A PROMISE TO ISSUE A SOLICITATION IN THE FUTURE AND

SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY

FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A

CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR

PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY

RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY.

THIS ACQUISITION CONTAINS TECHNICAL DATA WHOSE EXPORT IS RESTRICTED BY THE

ARMS EXPORT CONTROL ACT (TITLE 22, USC., SEC 2751 ET SEQ) OR THE EXPORT

ADMINISTRATION ACT (TITLE 50, USC., APP 2401-2402) EXECUTIVE ORDER 12470.

THIS INFORMATION CANNOT BE RELEASED OUTSIDE THE UNTIED STATES WITHOUT PRIOR

APPROVAL OF THE GOVERNMENT.

"EXPORT CONTROL REQUIRES THE APPLICABLE CERTIFICATIONS TO BE CURRENT FOR BOTH

THE QUOTER AND MANUFACTURER. THE OFFEROR AND ANY SOURCE(S) OF SUPPLY IT WILL

USE FOR CONTRACT PERFORMANCE MUST HAVE AN ACTIVE UNITED STATES/CANADA JOINT

CERTIFICATION PROGRAM (JCP) CERTIFICATION TO ACCESS EXPORT-CONTROLLED DATA

DLA DOES NOT INTEND TO DELAY AWARD IN ORDER FOR AN INELIGIBLE OFFER OR ITS

SOURCE(S) SUPPLY TO APPLY FOR AND RECEIVE AUTHORITY APPROVAL TO ACCESS THE

EXPORTCONTROLLED DATA"

David Bennett Contracting Officer