Sources Sought_PD_UH60 Test Program Set.pdf

Product Description

This is a Sources Sought to identify possible sources to support a possible requirement on a future Acquisition Purchase for the California Army National Guard Medical Readiness Detachment. The items being sought for this upcoming requirement are in reference to Battery Back-up Units. This is NOT a solicitation and ONLY A REQUEST FOR INFORMATION. The Point of Contact for this action is Mr. Manuel Jimenez and can be contacted via email at manuel.a.jimenez12.civ@army.mil or telephone number 562-795-2551. Please provide response if the following requirements can be supported by email no later than 10 November 2026.

UH-60L/M Operational Test Program Sets

Purpose: To procure Military UH-60L/M Black Hawk specific test program sets to test various aircraft electrical components and systems.

Background: These Test Program Sets (TPS) for the UH-60L/M electrical systems are a critical operational necessity. They ensure flight safety, maximize aircraft readiness (MC rates), and prevent catastrophic failures.

Place of Delivery: 5168 E Dakota Ave, Fresno, CA 93727.

Product Requirements:

Line 1: P/N: 991-000-00139-02 Test Program Set (TPS) The primary requirement for this TPS is to accurately and reliably test the electrical integrity of the Right-Hand (R/H) Relay Panel (Part Number: 70550-02102-056).

• The TPS must be able to automatically verify circuit continuity, detect short circuits or open circuits, confirm proper relay actuation, and ensure there is no signal bleed between circuits.

Must Include the following:

Test Program Software on CD-ROM Test Adapter Cables (TAC) in storage bags inside a rugged case

Line 2: P/N: 991-OTP-00014-02 Operational Test Program Set (OTPS) The requirement is to validate the integrity of high-power AC electrical paths within the Blade De-Ice (BDI) Distributor (P/N 70550-02127-104)

• The TPS must be able to test for continuity, shorts, and proper load balancing capabilities of the distributor's circuits to ensure it can handle the significant power draw of the de-ice system.

Test Program Set (TPS) to test BDI Distributor 70550-02127-104 Test Adapter Cables (TAC) in storage bags inside a rugged case

Line 3: P/N: 991-OTP-00119-01 Operational Test Program Set The requirement is to verify that the control panels correctly send command signals to the BDI system (P/N 70902-01099-045 & 70902-01099-047).

• The TPS must be able to simulate pilot inputs and confirm that the correct output signals are generated by the control panels without error.

Must Include the following:

Test Program Software on CD-ROM Test Program Set (TPS) to test BDI Control Panels 70902-01099-045 & 70902-01099 Test Adapter Cables (TAC) in storage bags inside a rugged case

Line 4: P/N 991-OTP-00120-01 Operational Test Program Set The requirement is to validate the complete electrical integrity of the Left-Hand (L/H) relay panels (P/N 70550-02105-057 & 70550-02419-043).

• The TPS which includes a Test Interface Assembly (TIA) must be able to comprehensively check for opens, shorts, and correct relay function across all circuits of two different panel part numbers.

Test Program Set (TPS) to test L/H Relay Panels 70550-02105-057 & 70550-02419-043 Test Interface Assembly (TIA) inside a rugged case Test Adapter Cables (TAC) in storage bags inside a rugged case

Please answer these Question: Does your company possess the capabilities to provide the equipment listed? Provide any details that you consider pertinent in your answer (e.g. potential challenges).

Also:

Vendor Name:

Business Size:

Unique Entity ID:

Cage Code: