Sources Sought Notice (SSN) FY26 Consolidated 20260417.docx

UNCLASSIFIED

CCF TURNAROUND, FC TEST DESCRIPTION, DCSS RF, AND SP21 REPAIR

1.0 Product Service Code (PSC)

Maintenance, Repair, and Rebuilding of Equipment – Electrical and Electronic Equipment Components (J059)

2.0 North American Industry Classification System (NAICS) Code

The applicable North American Industry Classification System (NAICS) code is 541330 – Engineering Services.

3.0 Contracting Office Address

Strategic Systems Programs (SSP) 1250 10th Street, Suite 4600 Washington DC 20374

4.0 Synopsis

This is a SOURCES SOUGHT NOTICE (SSN) announcement. SSNs are issued to assist the Agency in performing market research to determine industry interest and capability. No proposals are being requested or accepted with this synopsis. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. Therefore, no proposals are being requested or accepted in response to this SSN.

5.0 Purpose

In accordance with (IAW) Federal Acquisition Regulation (FAR) Part 10, SSP is conducting market research to determine if sources are capable of successfully performing the requirements identified in this SSN. Specifically, SSP is seeking firms, capable of successfully performing efforts to establish repair procedures and perform repairs in support of the Differential Pressure Transducer, perform activities in support of refreshing the Display and Control Subsystem (DCSS) 101 Console/Control and Monitoring Panel (CAMP) 20” Display, refresh of the Common Computer Function (CCF) Module Programmable Read-Only Memory (PROM) with Electronic Erasable Programmable Read-Only (EEFPROM), program new firmware in designated circuit card assemblies, and continuing the development of the Fault Code Decoder Tool and continue analysis of the Fire Control System. Efforts shall be performed and delivered in accordance with the applicable Ordnance Directives (ODs), Technical Program Management processes, Strategic Systems Programs (SSP) Shipboard Electronics Repair Facility (SERF) Program Plan, OD 65000, the Inspection Guide and Standard Repair Procedures (SRP) for the SSP SERF, OD 65001, T9001C Checklist dated March 24, 2025, applicable SSP Instructions (SSPINST), and as detailed in the enclosure (1) SSN Statement of Work (SOW) and cited in paragraph 8.0 below.

The contract type is Cost-Plus-Fixed-Fee, Term Contract Line Item Numbers (CLINs).

NOTE: Given the highly technical nature of SSP’s mission set as a major weapons systems command and corresponding technical requirements, respondents must provide recent and relevant past performance data (as detailed below) to demonstrate and substantiate the respondents ability to successfully execute requirements detailed in this SSN.

6.0 White Paper Capability Statement Credentials

a. SSP is seeking detailed, complete, and thorough White Paper capability statements from interested firms who can demonstrate and document, with evidentiary support, that they 1) possess the minimum qualifications and experience identified in paragraph 7.0 which are critical to the successful execution of the requirements, and 2) demonstrate recent and relevant experience, as the Prime contractor (or subcontractor) performing the same/similar efforts of the same/similar scope, size, and complexity to the requirements identified in paragraph 8.0. Interested firms must demonstrate their existing capability, or potential to acquire the capability, to meet requirements by the time of contract award, estimated to be 25 September 2026.

6.1 Small Business Concerns

IAW FAR Subpart 19.2 Polices, SSP seeks to provide maximum practicable opportunities in its acquisitions to small business, veteran-owned small business, service-disabled veteran-owned small business, HUBZone small business, small disadvantaged business, and women-owned small business concerns. Small Business Concerns who possess the minimum qualifications and experience identified in paragraph 7.0 and who can demonstrate its concerns’ capability (or ability to obtain the capability by the contract award date) to execute the complete requirements identified in paragraph 8.0, as well provide the requisite past performance experience detailed in Section 9.0, are encouraged to respond to this SSN.

If a small business concern intends to partner with another entity, the small business concern must identify which specific efforts/tasks it intends to perform, as well as the specific efforts/tasks the partner will perform, with the substantiating data required in this SSN supporting the identified partnering roles and responsibilities. NOTE: 100% of the SSN requirements must be addressed in any submitted partnering submittal.

NOTE: In the event this contract is set aside for small business concerns, the small business concern agrees that it will be in strict compliance and conformance with the percentage payment limitations for services, supplies, or construction (as applicable) to subcontractors that are not similarly situated entities in accordance with FAR 52.219-14 Limitations on Subcontracting and state such in their response.

7.0 Minimum Qualifications / Experience Requirements

Interested firms shall document and submit specific and evidenced / demonstrated possession of the minimum qualifications and experience requirements in the technical areas identified in bullets a through g below which are critical to the successful execution of the requirements in paragraph 8.0. This experience shall be documented as specified in paragraph 9.0.

a. Familiarity and recent experience with the U.S. Navy SSBN, Strategic Weapons System (SWS), specifically the Fire Control System and associated sub-systems, to include components, system integration, and interface capabilities.

b. In depth knowledge and experience working with the Strategic Systems Programs Operational Directives (ODs), SSP Instructions (SSPINST), Production Test and Inspection Plans (PTIP), and the SSP Technical Program management processes as outlined in the T9001-C document applicable under the Basic Ordering Agreement.

c. Detailed knowledge and understanding of the interfaces between the Submarine Launched Ballistic Missile (SLBM) and Strategic Weapon System (SWS) is required.

d. Sufficient Personnel trained, qualified, and experienced with the SWS Fire Control System, as well as adjacent sub-systems, in conjunction with the SLBM Program, and detailed knowledge of Fire Control System components, assemblies, system documentation, and repair procedures.

e. Familiarity with and recent experience in the management of Fire Control System SWS qualified vendors, procurement of SWS components from qualified vendors, assembly of qualified components into SWS assemblies and testing to ensure components and assemblies meet required specifications.

f. Detailed understanding of and recent experience in the performance of system and component qualification in support of the Submarine Launched Ballistic Missile (SLBM) system is required.

g. Detailed understanding of coordinated interfaces between the Submarine Launched Ballistic Missile (SLBM) system and shore-based support facilities is required.

8.0 Description of Requirements

See enclosure (1) SSN SOW Requirements.

8.1 Quantity of Personnel Required / Place of Performance

It is estimated five (5) Full Time Equivalent (FTE) personnel will be required to compete the effort as outlined, in Pittsfield, Massachusetts.

9.0 Evidentiary Qualifications/Experience Documentation Requirements

Interested firms must possess the requisite minimum qualifications and experience identified in paragraph 7.0 and demonstrated relevant and recent experience as it relates to the requirements in paragraph 8.0. White Paper Capability statements must include all of the content and details identified below:

9.1 Minimum Qualifications / Experience Requirements Validation

White Paper Capability statement submissions shall include a discrete section with the heading “Minimum Qualifications / Experience Requirements” and document, with specific information, each of the minimum qualifications identified in paragraph 7.0. This section may cite contract reference efforts detailed in Table A of paragraph 9.2 below provided that respondents provide context and rationale as to how that contract reference effort(s) demonstrate possession of the applicable Minimum Qualifications / Experience requirements of bullets a through d identified in paragraph 7.0 – or have capability of obtaining by contract award.

9.2 Relevant & Recent Experience / Supporting Narratives

In addition to demonstrating possession of the requisite Minimum Qualifications / Experience requirements identified in paragraph 7.0 above (or have capability of obtaining by contract award), interested firms shall demonstrate relevant and recent experience performing the same or similar efforts and or completion tasks (as applicable) to the SSN requirements in paragraph 8.0. Relevant experience is defined as performing efforts/tasks similar in scope, size, and complexity to the requirements in paragraph 8.0, with an annual incurred cost/expense of at least $2.65M. Recent experience is defined as work performed within 5 years of the SSN posting date. To substantiate the performance of relevant and recent efforts/tasks to the requirements in paragraph 8.0, White Paper Capability statements shall provide a list of current or previous contract references and the efforts/tasks performed thereunder detailing and evidencing a direct correlation of the contract reference efforts/tasks using the specific outline provided in Table A below. Submitter’s responses to the Table A outline shall include the following information per individual contract reference:

(i) Summary of relevant work performed and how that specific work demonstrates capability to perform the specific requirements identified in paragraph 8.0;

(ii) Current / Prior Contract Number(s) and Customer/Agency Supported;

(iii) Identification of your role as the Prime or Subcontractor;

(iv) Contract Type;

(v) Period of performance of the specific contract reference effort performed;

(vi) Quantity of FTE personnel utilized on the specific contract reference effort, per annum, with distinction and FTE quantities identified between the respondents FTE employees and any subcontractor FTE employees;

(vii) Net Dollar value (base and options) for each contract reference and the Annual Incurred costs for each contract reference provided which demonstrates the magnitude of those contract references in comparison to the annual estimated value cited in paragraph 9.2 above. NOTE: solely citing an IDIQ ceiling amount or base and all options aggregate value without the annual incurred costs for the submitted contract reference(s) is NOT acceptable – amounts must be specific to the actual incurred costs for a Contract CLIN(s) or Individual Task Order(s), for the contract reference(s) cited in Table A below; and

(viii) Customer point of contact with valid phone number and email.

TABLE A – SUMMARY OF RELEVANT & RECENT WORK EXPERIENCE

10.0 Company Information and Deadline for Submittal

White Paper Capability statements shall be submitted in Microsoft Word for Office 2000 compatible format or PDF format and are due no later than 24 April 2026, 9:00am EDT. The White Papers shall not exceed 5 pages in total, using 12-point Times New Roman and 1” margin and shall be submitted via e-mail to Angela.frye@ssp.navy.mil. NOTE: The page count, font size, and margin requirements apply to the entire SSN response, to include any Cover Page, Attachments, Headers, Footers, etc. “excluding” the Company Administrative Information below.

The Government is seeking detailed content and responses to the SSN requirements over any promotional details, pictures, etc.

ALL White Paper Capability submittals shall include the following Company Administrative Data which is “NOT” included in the aforementioned maximum 5-page limit:

1. Company Administrative Information

a. Company Name:

b. Company Point of Contact (email and phone) and Title:

c. Company Address:

d. Unique Entity Identifier (UEI) No:

e. Cage Code:

2. Size of business, including; total annual revenue, by year, for the past five years and number of employees;

3. Ownership, including whether: small business, veteran-owned small business, service-disabled veteran-owned small business, HUBZone small business, small disadvantaged business, and women-owned small business concerns;

4. Number of years in business;

5. Identification of the current security clearance held at your facility that will provide support to the requirements. NOTE: Work to be performed under this contract shall require the contractor to have a facility clearance of SECRET and a computing facility that is cleared to process SECRET data.

Respondents to this SSN shall indicate which portions of their response are proprietary/business sensitive and should mark them accordingly. It is the responsibility of the SSN respondent to monitor the sam.gov website for additional information pertaining to any potential acquisition.

11.0 Government Assessment

The White Paper Capability statement responses to this SSN must meet the requirements stated in the SSN and will be reviewed to determine whether each respondent is capable of performing the requirements. This review will be based solely on the specific data and supporting content provided by the respondents in their White Paper Capability statement submissions and responses to any follow on clarification inquires submitted by the Government. Incomplete or generalized White Paper Capability statements, without specificity as it relates to the SSN content requirements, omitted content, or content which fails to address all of the requirements of this SSN, will have a direct affect upon the Government’s assessment of the White Paper submittal. The Government’s assessment will include, but is not limited to, the following:

(1) The respondent’s specific and evidenced / demonstrated possession of the Minimum Qualifications / Experience requirements identified in paragraph 7.0;

(2) The respondent’s demonstrated ability to manage, as a Prime or Subcontractor, the types and magnitude of requirements identified in the requirements based on their relevant and recent performance of same/similar efforts/tasks in terms of scope, size, and complexity;

(3) The respondent’s demonstrated technical ability, as a Prime or Subcontractor, to execute the requirements based on their relevant and recent performance of same/similar efforts/tasks in terms of scope, size, and complexity; and

(4) The respondent’s demonstrated capacity to execute the enclosure requirements based on their relevant and recent performance of same/similar efforts in terms of scope, size, and complexity, the quantity of personnel required, and the contract award date.

12.0 SSN Disclaimer

This SSN is issued solely for Market Research purposes. It does not constitute a Request for Proposal (RFP) nor a promise to issue an RFP in the future. This SSN does not commit the Government to solicit or award a contract. The information provided in the SSN is subject to change and is not binding on the Government. Respondents are advised that ALL costs associated with responding to this SSN, including any requests for follow-up information, will be solely at the interested parties’ expense and the Government will not pay for any information or costs incurred or associated with submitting a SSN White Paper Capability statement or follow-on responses.

The Government reserves the right to consider a set-aside for small businesses or one of the small business preference groups. (e.g., small business, service-disabled veteran-owned small business, 8(a), HUBZone small business, and women-owned small business programs).