Sources Sought Notice HSC Seg 4 E2C_W912HY26X17KS_24 Jun 25.pdf

SOURCES SOUGHT SYNOPSIS

TITLE: Houston Ship Channel, Texas Expansion Improvements Project (ECIP) P11 Package #8 Segment 4 East E2 Clinton (E2C) DMPA

Notice Type: SOURCES SOUGHT SYNOPSIS

Source Sought Number: W912HY26X17KS

The U.S. Army Corps of Engineers, Galveston District has a requirement for the above subject. THIS IS A NOTICE FOR SOURCES SOUGHT ONLY. THIS

ANNOUNCEMENT SEEKS INFORMATION FROM INDUSTRY, WHICH WILL BE

USED FOR PRELIMINARY PLANNING PURPOSES. THIS IS NOT A REQUEST

FOR PROPOSAL OR INVITATION FOR BID. THERE IS NO BID PACKAGE,

SOLICITATION, SPECIFICATION OR DRAWINGS AVAILABLE WITH THIS

ANNOUNCEMENT. IT DOES NOT CONSTITUTE A PROCUREMENT

COMMITMENT BY THE US ARMY CORPS OF ENGINEERS, IMPLIED OR

OTHERWISE. NO CONTRACT WILL BE AWARDED FROM THIS SOURCES

SOUGHT ANNOUNCEMENT. REPONSE IS STRICTLY VOLUNTARY; NO

REIMBURSEMENT WILL BE MADE FOR ANY COSTS ASSOCIATED WITH

PROVIDING INFORMATION IN RESPONSE TO THIS SOURCES SOUGHT

ANNOUNCEMENT OR ANY FOLLOW-UP INFORMATION REQUESTS.

RESPONDENTS WILL NOT BE NOTIFIED OF THE RESULTS OF THE

EVALUATION.

The purpose of this synopsis is to gain knowledge of interest, capabilities, and qualifications of various members of industry, to include the Small Business Community: Small Business, Section 8(a), Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran-Owned Small Business (SDVOSB), Economically Disadvantaged (ED/Woman Owned (WO), Woman Owned (WO) and Woman-Owned Small Business (WOSB). Th e Government must ensure there is adequate competition of responsible firms.

Project Information: The work consists of earthwork on Port of Houston Property to build dredge management placement area (DMPA’s). The site is referred to as “East (E2) Clinton” and is 76 acres. The work entails raise grade to construct dikes for upland confined placement area. The earthwork DMPA improvements will be made ready for when material will be placed in interior at a future date.

• Contractor should demonstrate construction experience as a prime contractor working on Dredging Material Placement Areas.

• Contractor should observe the typical wet conditions associated with constructing Dredging Material Placement Areas.

• Contractor should expect to use equipment with low ground pressure due to the soft/wet material in which the equipment will be operating.

• Contractor should demonstrate experience conducting dike raises on dredge material placement areas.

• Contractor should demonstrate experience with new drop outlet structures and/or weir structures at dredging material placement areas.

Period of performance: Complete the entire work ready for use not later than 365 calendar days after the date the Contractor receives the Notice to Proceed.

In accordance with FAR 36.204, the estimated construction price range for this project is: Between $5,000,000 and $10,000,000.

All construction performance must comply with the USACE Safety and Health Requirements Manual, (EM 385-1-1, and must also comply with all Federal, State and local laws, ordinances, codes and/or regulations.

The North American Industry Classification System code for this procurement is 237990, Other Heavy and Civil Engineering Constructions, which has a small business size standard of $45 million.

The Product Service Code is Z1KB – Maintenance of Canals/Channels.

Small Businesses are reminded under FAR 52.219-14, (Deviation 2019-O0003), Limitations on Subcontracting. Firm will not pay more than 85% of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count toward the 85% subcontract amount that cannot be exceeded.

Prior Government contract work is not required for submitting a response to this announcement.

Contractor should be experienced with Earthwork for Placement Area. Contractor should provide examples of being a prime contractor conducting Earthwork for Placement Area.

Bonding Requirements: Performance and Payment Bonds are required within 5 calendar days after award and the contractor shall begin work within 10 calendar days after receipt of the Notice to Proceed.

If the contractor fails to complete the work within the time specified, the contractor shall pay liquidated damages to the Government in the amount of $3,9555.00 for each calendar day of delay until the work is completed or accepted.

FIRMS RESPONSE SHALL INCLUDE THE FOLLOWING INFORMATION:

1. Unique Entity Identifier (UEI) & Commercial and Government Entity (CAGE) (This information can be obtained from your System for Award Management (SAM) Registration at www.sam.gov ).

2. Name of firm with address, phone, fax, e-mail address, and point of contact.

3. Indicate whether your firm will submit a bid for this project if set-aside for Small Business (SB), 8(a) Small Business Development Program, Historically Underutilized Business Zones (HUB-Zone), Service-Disabled Veteran Owned Small Business (SDVOSB), Economically Disadvantaged (ED/Woman Owned (WO), Woman Owned (WO) Woman-Owned Small Business (WOSB).

4. Firm’s Joint Ventures (existing), including Mentor Protégés and teaming arrangement information is acceptable.

Qualifications: Responses to this source sought announcement shall indicate specialized experience and technical competence in:

a. Contractor must be experience in completing work outlined under the paragraph above for “Project Information”

1. Firm’s capability to perform the magnitude and complexity outlined in the Scope of Work above or comparable work performed within the past 5 years):

2. Brief description of each project, customer name, and dollar value of the project)– provide at least 3 examples.

3. Firm’s Bonding Capacity (Bid Bond (20% of total bid amount), Performance and Payment Bond (100% of the contract amount) bonding level per contract and aggregate construction bonding level, both expressed in dollars

Firms responding to this announcement, who fail to provide ALL required information requested and outlined above, may be excluded from further consideration in the review and analysis for acquisition strategy determination.

Anticipated solicitation issuance date is on or about October 2025, and the estimated proposal due date will be on or about November 2025. Estimated award on or about date is December 2025. The official synopsis citing the solicitation number will be issued on Procurement Integrated Enterprise Environment (PIEE) https://piee.eb.mil/ inviting firms to register electronically to receive a copy of the solicitation when it is issued.

http://www.sam.gov/ https://piee.eb.mil/

Interested Firm’s shall respond to this announcement no later than July 10, 2025, at 10:00 AM (Central Time). All interested firms must be registered in SAM.gov to be eligible for award of Government contracts.

Email your response to Ms. Christy Slater at:

Christy.L.Slater@usace.army.mil mailto:Jaclyn.C.Yocum@usace.army.mil