Sources Sought Notice.pdf

SOURCES SOUGHT FOR N6470926R0004

FOR Strategic Weapons Facility, Atlantic

Email to SPK12CONTRACTS@swflant.navy.mil no later than 08 October 2025. The NAICS for this planned solicitation is 333618 and the small business size standard is 1500.

Firm Name:

Address:

Point of Contact Name:

Phone:

Email:

Is your firm registered in SAM.gov? https://www.sam.gov/

☐ Yes ☐ No

If yes, please provide CAGE and/or Unique Entity ID.

CAGE/NCAGE:

Unique Entity ID:

Type of Business: (Check all which apply for NAICS 333618)

☐ SBA Certified 8(a) Firm

☐ SBA Certified HUBZone

☐ Service Disabled Veteran-Owned Small Business

☐ Veteran Owned Small Business

☐ Small Disadvantaged Business

☐ Woman Owned Small Business

☐ Small Business

☐ Other Type of Small Business (Specify)

What would be your firm’s interest in proposing on the planned solicitation for the Scope of Work?

☐ Very Likely ☐ Likely ☐ Not Likely

STATEMENT OF WORK

Brand Name Purchase, General Requirements: The equipment specified in this Contract is original to the Gladding Hearn designed and built 64-foot Patrol Boat (64PB), as procured by

Government Contract N00024-07-F-2213, Modification 3. The Contractor will produce and deliver two (2) new or remanufactured Original Equipment Manufacturer (OEM) MTU

10V2000M92 with ZF Marine, ZF2050 R:1.765:1 Marine Gear. Both components will be connected using a new Vulkan VL3211S-14 torsional coupling, complete the assembly. Both engine and marine gear assemblies will be preserved for storage, to the OEM standard, in a warehouse for up to 36 months, packed in a poly foil bag with desiccant packs and mounted in a reusable wood shipping crate.

Engine Characteristics:

64 FT Screening Vessel (SV64) Propulsion Engine

Manufacturer: Detroit MTU Type: Turbocharged, 4-Cycle Diesel

Model: 10V 2000 M92 Cylinders: MTU 10V2000M92

Bore and Stroke: 53-inch X 6.1-inch Displacement: 1,361-inches3

Rated RPM: 2,450 Output: 1,360 BHP

Dry Weight: 5,952 Pounds Oil Quantity: 21.4 GAL

Shipment Weight: 6,028 Pounds

*Reference 20 is the Boat Information Book (BIB) S9008-G1-BIB-010, which contains additional specifications.

Marine Gear Characteristics:

64 FT Screening Vessel (SV64) Marine Gear

Manufacturer: ZF Marine Ratio: 1.765:1

Model: ZF 2050 Oil Type: Chevron Delo 400 SAE 15W-40

Operating Pressure: 268 psi Oil Quantity: 21.0-L

Operating Oil Temperature: 150°F – 185°F

*Reference 20 is the Boat Information Book (BIB) S9008-G1-BIB-010, which contains additional specifications.

1. SCOPE OF THE WORK:

The Contractor will produce and deliver a quantity of two OEM new production or remanufactured MTU 10V2000M92 with ZF Marine, ZF2050 R:1.765:1 Marine Gear:

• MTU factory remanufactured 10V2000M92 marine engine rated 1360 BHP

@ 2450 RPM including:

o Titanium plate fresh water to raw water heat exchangers, engine mounted o Self-priming, bronze impeller, gear drive centrifugal raw water pump o Dual spin-on duplexing secondary fuel filters, engine mounted o Dual spin-on duplexing lube oil filters, engine mounted o Closed crankcase ventilation system o Dry replaceable air filters with air restriction indicator o Air intake silencers mounted inside air cleaners to reduce turbo noise o Triple wall water-cooled exhaust manifolds o Sequential waste gated turbochargers o Return fuel cooler built into heat exchanger o Double wall fuel system with internal leakage alarm system o MTU electronic engine control system o Starter - 24 volt o Battery charging alternators - direct mount belt driven 24 volt, 140 amp, 2 pole isolated ground o MTU/ Kim Hot-start coolant heater system with heating elements installed in the exhaust manifold water jackets, thermostatic control box mounted on engine with on-engine harnesses, 240VAC, 1 ph.

o New ZF2050 marine reduction reverse gear, 1.765:1 ratio, flange mounted to engine

24V shift, bolt-on mounting brackets, monitoring sensors compatible with MTU

Smartline monitoring system o New Vulkan VL3211S-14 torsional coupling o New resilient engine and gear mounts o Cu Ni raw water supply pipe and connection hoses for supply of cooling water from engine raw water pump elbow to gear oil cooler, duplicating the installation currently used in the vessels.

o Engine and gearbox are preserved for storage in a warehouse for up to 36 months, packed in a poly foil bag with desiccant packs and mounted in a reusable wood shipping crate.

o Graduated Thermostats, Contractor installed prior to delivery.

2. DELIVERY INFORMATION: The Contractor will deliver the required equipment to

Metson Marine Services, 356 EMS Tower Road, Woodbine, GA. 31569. Metson is the current TPP maintenance contractor and will store the engines for Strategic Weapons Facility

Kings Bay. The specified equipment shall be delivered by the Contractor. Contractor will coordinate the time for delivery of the required equipment with the SWFLANT Point of

Contact: Mr. Bart Crawford at bart.crawford@swflant.navy.mil or Office: 912-676-2147 /

Mobile: 912-540-7650 / After hours: 912-276-4530.

3. Badge requests are to be submitted to the POC at least 5 working days prior to requested access date. (N/A, no badge required for delivery to Metson).

4. MATERIALS: The contractor will provide all materials necessary to complete the job.