Sources Sought Notice.docx

This is a Sources Sought notice only. This is not a request for quotes and no contract will be awarded from this announcement. The Government will not provide any reimbursement for responses submitted in response to this Source Sought notice. Respondents will not be notified of the results of the evaluation.

If a solicitation is issued it shall be announced later, and all interest parties must response to that solicitation announcement separately. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.

The purpose of this announcement is to perform market research to gain knowledge of potential qualified sources and their size classification relative to NAICS 339113, (Surgical Appliance and Supplies Manufacturing) with a size standard 800 employees. The Department of Veterans Affairs (VA), Network Contracting Office 1 (NCO 1) is seeking to identify any vendor capable of providing comprehensive preventative maintenance and repair services for Patient Beds, Stretchers, and Mattresses at the Manchester NH VAMC per the Statement of Work (SOW).

This Sources Sought notice provides an opportunity for respondents to submit their capability and availability to provide the requirement described below. Vendors are encouraged to submit information relative to their capabilities to fulfill this requirement, in the form of a statement that addresses the specific requirement identified in this Sources Sought. Information received from this Sources Sought shall be utilized to facilitate the Contracting Officer’s review of the market base, for acquisition planning, size determination, and procurement strategy.

Submission Instructions: Interested parties who consider themselves qualified to perform the services are invited to submit a response to this Sources Sought Notice by June 11, 2024 3:00 PM EST. All responses under this Sources Sought Notice must be emailed to david.valenzuela2@va.gov with RFQ #36C24124Q0588 in the subject line. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions.

Interested parties should complete the attached Sources Sought Worksheet. Parties may submit additional information related to their capabilities, provided it contains all the requirements contained in the Sources Sought Worksheet. Responses to this Sources Sought shall not exceed 8 pages. In addition, all submissions should be provided electronically in a Microsoft Word or Adobe PDF format.

Attachment 1 Sources Sought Worksheet

QUALIFICATION INFORMATION:

Company / Institute Name: _______________________________________________________ Address: ______________________________________________________________________ Phone Number: ________________________________________________________________ Point of Contact: _______________________________________________________________ E-mail Address: ________________________________________________________________ Unique Entity Identifier (UEI) #: ___________________________________________________ CAGE Code: __________________________________________________________________ SAM Registered: (Y / N) Other available contract vehicles applicable to this sources sought (GSA/FSS/NASA SEWP/ETC): __________________________________________________________________

SOCIO-ECONOMIC STATUS:

VIP Verified SDVOSB: (Y / N) VIP Verified VOSB: (Y / N) 8(a): (Y / N) HUBZone: (Y / N) Economically Disadvantaged Women-Owned Small Business: (Y / N) Women-Owned Small Business: (Y / N) Small Business: (Y / N) NOTE: Respondent claiming SDVOSB and VOSB status shall be registered and Center for Veterans Enterprise (CVE) verified in VetBiz Registry www.vetbiz.gov.

BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SDVOSB, VOSB, SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION.

CAPABILITY STATEMENT:

Provide a brief capability and interest in providing the service as listed in Attachment 2 SOW with enough information to determine if your company can meet the requirement. The capabilities statement for this Sources Sought is not a Request for Quotation, Request for Proposal, or Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach, but rather the Government is requesting a short statement regarding the company’s ability to provide the services outlined in the SOW. Any commercial brochures or currently existing marketing material may also be submitted with the capabilities statement. This synopsis is for information and planning purposes only and is not to be construed as a commitment by the Government. The Government will not pay for information solicited. Respondents will not be notified of the results of the evaluation.

Attachment 2

DEPARTMENT OF VETERANS AFFAIRS

STATEMENT OF WORK

Maintenance Service Contract – Beds, Stretchers and Mattresses

1.0 INTRODUCTION

The VA Medical Center in Manchester is seeking a qualified contractor to perform comprehensive preventative maintenance and repair services for Patient Beds, Stretchers, and Mattresses at our campus. Service performance will be for the VAMC- Manchester at 718 Smyth Road, Manchester, NH 03104.

2.0 BACKGROUND

The VA Patient Beds, Stretchers, and Mattresses have required preventative maintenance (PM) on a periodic basis through the year. The Facility Service, Maintenance Department, requires assistance in keeping up with required PMs on the medical equipment to ensure proper operations and prevent failure points on the equipment. Our current Maintenance staff is shorthanded to ensure proper PMs are being completed as well as responding to maintenance calls, performing regular duties, and handling the increase work order requests. A service contract would be needed to ensure the proper and timely of the required PM s on the Patient Beds, Stretchers, and Mattresses.

3.0 SCOPE

3.1 Item 1 – Preventative Maintenance (PM)

The contractor shall provide all personnel, equipment, tools vehicles, materials, supervision, and other items and services necessary to perform preventative maintenance, testing and repair tasks functions for the equipment described in the SOW.

Contractor shall perform preventative maintenance (PM) for all equipment listed in Attachment A, including ancillary components associated with the functioning of these devices. PM shall be performed in a manner designed to optimize the reliability, efficiency and lifespan of the equipment serviced.

The contractor shall adhere to all individual manufacturer’s requirements and instructions for the particulars of scheduled maintenance of the systems/equipment. All contractor personnel and subcontractors that perform scheduled maintenance shall be qualified by the systems/equipment manufacturer where necessary to preserve any warranties on the systems/equipment. The contractor shall provide a written monthly schedule to the Contracting Officer Representatives (COR) for the facility, listing the specific equipment to be serviced during the upcoming period and outlining the individual PM tasks to be completed, including any after-hours service.

The contractor shall obtain, provide and install all parts, materials, and supplies necessary to perform PM, and shall be responsible for the cost of same within their base bid amount. Contractor shall use parts supplied by the original equipment manufacturer (OEM) or authorized equal (as stipulated by the manufacturer) when replacing all parts, components, and/or devices for the covered systems. Should the contractor encounter a part in need of replacement, and the direct replacement is no longer available due to obsolescence, the contractor shall replace that part with a new equivalent part. The contractor shall notify the VA when such replacements/modernization occurs.

The contractor shall provide labor, material, and equipment necessary to perform routine preventative maintenance and calibration services at the intervals specified in Attachment A. The vendor shall perform all manufacturer recommended routine maintenance on the following equipment/systems.

· Scheduled Maintenance of Stretchers

· Scheduled Maintenance of Beds.

Prior to routine maintenance contractor shall clean the unit and associated mattress in accordance with Manufacturers recommendations.

The vendor shall perform all manufacturer recommended routine maintenance, whether or not included in the list below:

· Check the following:

· All fasteners secure.

· Siderails move and latch properly.

· All casters lock with brake pedal engaged.

· All casters secure and swiveling properly.

· Fowler operates and latches properly.

· No leaks at hydraulic connections.

· Hydraulic jacks holding properly.

· Hydraulic oil level sufficient. Refill if necessary

· Ground chain intact

· Body restraints working properly.

· I.V. pole intact and operating properly.

· Oxygen bottle holder intact and operating properly.

· No rips or cracks in mattress cover. (See Task 3.2 Item 2)

· Engage the drive wheel and ensure it is operating properly.

· No excessive play in the drive handles

· No cables worn, pinched or frayed.

· Confirm battery powered functionality.

· All electrical connections tight.

· All grounds secure to the frame.

· Current leakage not more than 300 microamperes (per UL 60601-1).

· Ground impedance not more than 100 milliohms max: Test point(s) include electronics enclosure and motor chassis mounted to base of unit.

· Trendelenburg/Reverse Trendelenburg operating properly.

· Accessories and mounting hardware in good condition and working properly

· Press the handle switches. Unit should not move unless the handles are pushed forward or pulled back.

· Press the handle switches. Move the handles forward and back and verify the unit responds properly

· Lubricate where required, including the brake adjuster assembly and brake cam

· If Installed:

· Scale calibrated properly. Recalibrate, if necessary

· Batteries sufficiently charged

· Display housing intact and not damaged

· Display label intact and not damaged

· Load cells intact and not damaged

· Knee Gatch operating properly

· All other PM tasks as per manufacturer’s recommendations.

The scope consists of routine preventative maintenance service and needed repairs to the equipment and associated components listed in Attachment A; Equipment Inventory. The Contractor is required to inspect and service all equipment in accordance with all manufacturer's recommendations, prevailing industry standards and codes.

Personnel Qualifications- Before assigning employees to start work under the terms of this contract, the Contractor shall ensure that they have the required qualifications and, if applicable, possess the required current and valid professional certifications and licenses in compliance with federal, state, and local environmental requirements and laws. Personnel operating motor vehicles shall have a valid state driver’s license and abide by all NH VAMC Healthcare System traffic laws, i.e. hands-free cell phone use while driving, and parking requirements. As part of the quotation, the Contractor shall submit information on the qualifications or certifications for employees and sub-contractors proposed to work on the services of this contract. Journeyman tradespersons shall be licensed for their respective trades in accordance with Federal requirements. Contractor will ensure all certificates, licenses and permits are kept current and valid. All license and certification renewals shall be submitted to the COR annually or as requested.

The COR shall track Contractor compliance with any manufacturers and contract warranties and shall maintain on-site records of equipment bearing warranties. The contractor shall provide fully completed worksheets to the COR with sufficient detail concerning each completed task. The contractor will annotate equipment records showing warranted items and warranty expiration dates on all equipment. The contractor shall provide supporting documentation for any warranty claims to the on-site COR. The Government will provide the contractor with all existing warranty documentation at the start of the task order. The contractor shall maintain and inspect all equipment under warranty, without voiding the warranty.

An equipment inventory is incorporated into this Site-Specific statement of work. The contractor is responsible for all required routine maintenance of the equipment included in the inventory and as described herein, necessary to ensure proper function of the equipment in accordance with manufacturer’s guidelines, applicable standards and codes. Any unscheduled maintenance/repair work shall be performed when authorized by the Contracting Officer CO or COR, in accordance with Government-approved technical instructions and facility priorities. NOTE: unscheduled maintenance does not include routine maintenance. Routine maintenance services must be incorporated within the base bid amount.

The CO and COR shall notify and work with the contractor on any additional equipment added or changes to the equipment list for PMs and frequency. The contract will then be modified to address the updated costing to the service agreement. Also, the CO and COR shall notify and work with the contractor to remove the equipment item from coverage because it can no longer be economically maintained or has been removed/replaced from the property. The contract will then be modified to address the updated costing to the service agreement.

3.2 Item 2 – Annual Mattress Audit

The contractor shall perform annual mattress audit of all mattresses on equipment listed in Attachment A at the VAMC- Manchester. The work shall be conducted in accordance with Attachment B as well as the work listed below. Contractor shall populate all data on attachment B and submit as a deliverable item.

The work shall include, but not be limited to the following:

· Verification of Manufacturer’s Warranty and Replacement Recommendations

· Cleaning as outlined in manufacturer’s equipment manuals

· Verification of Mattress Manufacturer, Model and part number(s)

· Identification of total number of mattresses and number of mattresses compromised.

· Inspect all Mattresses for:

· Evidence of compromise on external side of mattress to include but not limited to tears, cracks, creases, pinholes, etc.

· Presence of odor before and after cleaning for odors not attributable to the cleaning products

· Functionality issues with the zipper, Velco and/or other fasteners.

· Presence of staining on underside of mattress cover (internal inspection)

· Presence of damage or staining to internal foam, gel, etc. (internal inspection)

· Presence of damage to internal fire barrier (internal inspection)

· If Mattresses are compromised, immediately notify COR and mark with a visual indicator to prevent use.

3.3 Item 3- Non-Routine Services (Labor)

The contractor shall provide on call services to include labor costs. The vendor will be able to respond to fix issues within two (2) weeks. The contractor shall respond within two (2) weeks for all non-routine call backs on the equipment section listed in the above scope of work and to include, but not limited to the equipment items in Attachment A.

Contractor shall provide 40 hours as specified under this line item.

3.4 Item 4 – Emergency Services (Labor)

The contractor shall provide on call services to include labor costs. The vendor will be able to respond to fix issues within four (4) hours. The contractor shall respond within 4 hours for all emergency call backs on the equipment section listed in the above scope of work and to include, but not limited to the equipment items in Attachment A.

Contractor shall provide 16 hours as specified under this line item.

3.5 Item 5– Materials and Parts (Non-Routine Repairs and Maintenance) The contractor shall supply parts and materials ($300 per equipment item per year) as needed for necessary upgrades, replacement, and repairs. If cost exceeds the agreed upon limitation ($300 per equipment item per year), then a list of repairs required as a result of the inspection will be provided with a cost proposal for the repair within 24 hours to the COR.

Repairs shall be completed within 24 hours after the need for repair has been identified by the contractor or by the COR. All repairs shall be in accordance with the equipment manufacturer’s requirements and\or applicable laws, regulations, codes, etc. All parts and materials shall be of the original manufacturer’s design and specification, or equal thereto. An extension may be granted at the discretion of the COR on a case by case basis. Each request for an extension must include and explanation for the delay, and estimated time of completion, and evidence to clearly show that the contractor has made every effort to repair the system as timely as possible.

4.0 PERFORMANCE REQUIREMENTS

All work shall be completed such that the integrity of the systems is maintained. All work shall be done in accordance with OSHA, EPA regulations, NFPA codes, with particular attention to VA codes, Federal, State, and local regulations throughout the course of this service contract.

The Contractor shall submit technician certification/licensure prior to work start. Copies of these are also to be submitted with the completed checklists.

The contractor shall submit all necessary safety plans to include, but not limited to; equipment specific Lock-Out Tag Out procedures, Electrical Safety plan and SDS for any chemicals used to the COR for approval prior to working at the Medical Center.

The contractor shall schedule all site visits, to include emergencies, with the COR.

The contractor shall furnish authentic parts from the equipment manufacturer. The determination of when to replace parts is at the recommendation of the technician, with the COR’s concurrence. Additional service charges may be incurred to install parts during scheduled inspections or callbacks as specified in this agreement.

The contractor shall operate on the premises during the hours of 0700 and 1630, unless otherwise authorized by the COR.

The contractor shall respond within 4 hours for all emergency call backs.

Work sites shall be left in the same manner of cleanliness and order in which they were found. Vendor will provide their own waste disposal, if any.

All vendor technicians performing work on site must report to Facility Service in Building 6 to the contractor badge check in/out room to sign in on the contractor log and get a “Contractor” badge. Badges must be returned, and log signed out prior to departing the premises. Vendor shall then coordinate with the COR prior to performing their work.

Personnel must wear the proper personal protective equipment (PPE) at all times. Work done under this project must comply with infection control requirements.

The contractor shall receive all deliveries of materials, equipment, tools, or other goods off of station, and bring them to the job site. The Manchester VA shall not accept deliveries for project purposes.

Special care will be taken to secure tools and construction equipment.

Material Safety Data Sheets (MSDS’s) must be submitted to the COR for approval for all hazardous materials before they are brought to the work site.

End of day cleanup of the work area(s) is mandatory, and all trash shall be bagged and properly disposed of offsite.

Contractor vehicles, including those of their employees, are to be parked in the lower level of Lot D.

All travel costs associated with performance of this contract are the responsibility of the Contractor and are provided at no additional cost to the government as part of this contract. Travel costs are defined but not limited to time and vehicle costs for personnel in travel to and from job site for all duties outlined in this specification, normal shipping charges on any parts or materials covered by this contract, costs associated with the normal shipping of parts or equipment out for repair that are covered under this contract, etc.

5.0 DELIVERABLES

Contractor shall coordinate with the COR to provide a complete calendar year schedule for scheduled maintenance tasks at the commencement of the contract.

Contractor shall provide a prioritized phone support contact list at the commencement of the contract.

Submittal of proposed equipment and materials to be used on site for review and approval by the COR.

Submittal of Contractor safety plan and lock-out tag-out plan.

Submittal of Safety Data Sheets (SDS) shall be provided by the contactor for all chemicals proposed to be brought to the medical center. Chemicals must be approved before they can be located on property.

6.0 ATTACHMENTS-

Attachment A : Equipment Tables

Attachment B: Annual Mattress Audit Form

Attachment A:

BEDS

STRETCHERS

Attachment B (Annual Mattress Audit):

image1.png image2.png