Sources Sought for Wheel Assembly Kits.docx

Sources Sought Notice

DESCRIPTION OF INTENT

This is a SOURCES SOUGHT NOTICE/MARKET RESEARCH SURVEY to request information for Government planning purposes only. The Army Contracting Command – Detroit Arsenal (ACC-DTA) is seeking to gain knowledge of interest, capabilities and qualifications of various members of the community, to include both small and large businesses, for production of the item identified below. Responses to this Sources Sought Notice/Market Research Survey will assist ACC-DTA in planning its acquisition strategy for a potential future acquisition.

2530-01-727-1390 2530-01-726-8150 2530-01-726-2686 2530-01-726-2794 57K02050/19207 57K02049/19207 57K02052/19207 57K02051/19207 57K02053/19207

ESTIMATED QUANTITY: 15000 EA for each NSN over five years

TECHNICAL DATA

PACKAGE

There are technical data packages (TDP) associated with this procurement with distribution code A.

Although the TDP for the overall Kit is competitive, there are source-controlled parts where vendors must go through the two sources to obtain the components or go through the process of becoming an approved source. To become an approved source, you would need to submit a SAR package. This link below will allow you to go through the process to become one. https://tacom.army.mil/ombudsman/sap

Vendors will need to provide proof that you are able to obtain the source-controlled parts from Oshkosh Defense. Source controlled parts are provided below with NSNs and nomenclature:

4810-01-608-7961; BODY, VALVE CTIS

4730-01-568-5267; ADAPTER, STRAIGHT, PI

4710-01-578-8155; TUBE, ASSY, METALLIC

FIRST ARTICLE TESTING

Not required

NOTE: All survey input is voluntary, and no compensation will be made for your firm’s participation. Since this is a Sources Sought Notice, and not a solicitation for receipt of proposals or quotations, the Government does not encourage questions concerning this market research. Furthermore, the Government is not obligated to issue a solicitation or award a contract because of this announcement.

INSTRUCTIONS FOR COMPLETING THE SURVEY

1. You may respond in total, or in part, to this survey. However, all responses must be received no later than 6 April 2026 at 05:00 EST.

2. All completed surveys shall be sent via e-mail to:

Nikhil Patel Contract Specialist, ACC-DTA E-mail: nikhil.a.patel2.civ@army.mil Subject Line: Sources Sought for Wheel Assembly Kits

3. Relevant sales media and product manuals may be included as attachments with your submission. Please clearly mark all proprietary information. The front page of your response package should state "PROPIETARY INFORMATION CONTAINED WITHIN" (all caps), if applicable. Also, please provide a release statement indicating that the proprietary information may be distributed to Army personnel involved with this survey.

CONFIDENTIAL INFORMATION & LABELING

The Government acknowledges its obligations under 18 USC §1905 to protect information qualifying as confidential. Pursuant to this statute, the Government is willing to accept any trade secret or confidential restrictions placed on qualifying data forwarded in response to the survey questions, and to protect it from unauthorized disclosure subject to the following:

1. Clearly and conspicuously mark qualifying data as trade secret or confidential with the restrictive legend “CONFIDENTIAL” (all caps), including any explanatory text, so that the Government is clearly notified of what data needs to be protected.

2. In marking such data, please take care to mark only those portions of the data or materials that are truly trade secret or confidential (overbreadth in marking inappropriate data as “CONFIDENTIAL” may diminish or eliminate the usefulness of your response). Use circling, underscoring, highlighting, or any other appropriate means to indicate those portions of a single page that need to be protected.

3. The Government is not obligated to protect unmarked data. Additionally, marked data that is already in the public domain or in the possession of the Government or third parties, or is afterward placed into the public domain by the owner or another party through no fault of the Government will not be protected once in the public domain. Data already in the Government’s possession will be protected in accordance with the Government’s data rights.

4. Confidential data transmitted electronically, whether by physical media or not, whether by the respondent or by the Government, shall contain any restrictive legend, with any explanatory text, on both the cover of the transmittal e-mail and at the beginning of the file itself. Where appropriate for portions only of an electronic file, use the restrictive legends “CONFIDENTIAL DATA BEGINS:” and “CONFIDENTIAL PORTION ENDS”.

5. In any reproductions of technical data or any portions thereof subject to asserted restrictions, the Government shall also reproduce the asserted restriction legend and any explanatory text.

6. The Government sometimes uses support contractors in evaluating responses. Consequently, responses that contain confidential information may receive only limited or no consideration since the respondent’s marking of data as “CONFIDENTIAL” will preclude disclosure of same outside the Government, and therefore will preclude disclosure to support contractors assisting with the evaluation effort.

QUESTIONNAIRE / SURVEY

A) Vendor Profile. Please complete the yellow-highlighted fields below:

1.

COMPANY NAME:

MAILING ADDRESS:

CAGE CODE:

POC NAME / TITLE:

PHONE NUMBER:

E-MAIL ADDRESS:

WEBSITE:

2. Business type for NAICS 336350: (Please check all that apply.)

8(a)

Small Disadvantaged

HUBZone

Women-owned

Large Business

None of the Above. Please Explain: ________________

Service-disabled Veteran-owned

Small Business

*If claiming small business status, the information must be verifiable in SAM.gov

3. Please indicate if the NAICS code selected is appropriate, if not, please explain why.

4. Nonmanufacturer Rule. To qualify as a small business concern for set-aside or sole source supply contracts, a small business must meet at least one of the qualifications listed below. Please indicate which qualification, if any, applies to your firm:

Manufacture the product itself; or

Supply a product manufactured by another small business if it is a nonmanufacturer; or

Supply the product of any sized manufacturer if the Small Business Administration has granted a waiver to the nonmanufacturer rule.

5. A current DD 2345, Military Critical Technical Data Agreement, must be on file with the Defense Logistics Information Service (DLIS) to access and view the TDP associated with this procurement. Does your firm have a current DD 2345 on file with DLIS?

Yes

No

Approval Pending. Application submitted on: [MM/DD/YYYY]

B) Requirement-specific Information. Please complete the questions below:

2530-01-727-1390 2530-01-726-8150 2530-01-726-2686 2530-01-726-2794 57K02050/19207 57K02049/19207 57K02052/19207 57K02051/19207 57K02053/19207

1. Has your firm manufactured this item or some of these items for a U.S. Government agency in the past? If so, please list the contract number(s) and agency(s).

2. Is your firm currently capable of manufacturing these items? Statements of your firm’s expertise should include reference to relevant contracts performed (including a description of the scope, quantity manufactured, and point of contact with phone number).

3. If your firm was awarded a contract for this item, where would production take place?

4. Would your firm be able to certify via a signed commitment letter that they are capable of getting the necessary parts listed in the TDP, in order to adhere to the QPL Requirements? This includes the three listed parts from Oshkosh Defense.

5. Does your firm have experience with first article testing (FAT)? If so, please provide a brief summary of the experience.

6. What is your firm’s production lead time for these items after receipt of award? (Please respond in number of calendar days.)

7. What is your firm’s minimum, normal and maximum sustainable monthly production rates for these items?

8. If your firm currently sells these NSNs, what is your firm’s current price per unit for this item?

9. Please identify your firm’s current quality management system. Also, is your firm independently certified in that system?

10. Are you able to submit a proposal for a quantity that is more than 900 per ordering year?

11. What is your production lead time?

12. Please provide a summary of the item’s commercial availability.

13. If you are a small business, does your method of fulfilling the contract comply with the limitations of the subcontracting clause?

14. Are there any challenges to proposing a five-year contract? Can your business handle this contract for the production of these five separate NSNs?

15. Is there any other pertinent information that your firm would like to disclose? If so, please list below and/or include as a Microsoft Word (doc or .docx) or Adobe Acrobat (.pdf) attachment with your submission.