Sources Sought Dyno Upgrade.docx

***This is only a sources sought please do not provide pricing, GSA is only seeking sources***

The Government is looking for capability statements from contractors who can provide a Dyno Upgrade for the Marine Depot Maintenance Command. The Dyno Upgrade must be at least 90% manufactured by the company providing the response. In responding to this sources sought, please provide the part number for any relevant products currently available and your firm’s socio-economic status. If you have previously provided this type of solution, please submit the contract number and/or delivery order number. In addition, please indicate in the response if your company manufactures at least 90% of the requested product.

Please fill out the below completely and email to gary.carson@gsa.gov.

Responder’s Information:

Company’s Name:

Unique Entity ID Number (UEID):

Socio-economic status:

Capability Statement Provided:

SALIENT CHARACTERISTICS

Dyno Upgrade Specifications shall include the following.

QTY

•Includes: Load Cell Assembly, Torque Arm and mounting hardware

•Maximum Recommended Continuous Torque 3,800 ft-lb (5,152 Nm) with no angular misalignment and 2° ±1° slope (parallel offset between 1/2 and 1-1/2 in (13 and 40 mm)) •Maximum Allowable Speed 4,500 rpm• Maximum Recommended Continuous Torque 3,800 ft-lb (5,152 Nm) with no angular misalignment and 2° ±1° slope (parallel offset between 1/2 and 1-1/2 in (13 and 40 mm)) •Maximum Allowable Speed 4,500 rpm

2 TORSIONAL COUPLING,1710/1810

TD-3100 Engine Dynamometer 2 TD-3100 ENGINE DYNAMOMETER, 1250HP(932kW •Power: 1,250 Hp (932 kW) •Torque: 3,600 ft-lb (4,881 Nm) •Speed: 4,000 RPM •Includes torque calibration arm •Includes SAE 0-4 flywheel housing adapter plate

1 LOAD CONTROL ASSEMBLY, ENGINE, TD3100-31

•Including: - Water Pressure Regulating Valve(s) & Accessories- Load Control Valve(s) and mounting hardware.

· Air Pressure Regulation Kit

· Dynamometer Speed/Load Cable

Features include:

•Fully configurable, with built-in, full-featured programmable language System Channel list.

•Eight (8), Pressure input channels with dual LCD display 1 ea: 0-20psia 1 ea: 0-75psia 4 ea: 0-150psia 1 ea: 0-200psia 1 ea: 0-500psia •Sixteen (16), Thermocouple input channels (Type K) with dual LCD display •Connections for: Dyno, Speed, Throttle, Digital Inputs, Analog Inputs, Frequency inputs, Fuel Measurement, Blow- by, Weather Station, Opacity, Network and Peripheral connections.

•Provides an isolated 0-20 mA signal to the ECM at maximum of 15 VDC

3 THROTTLE VOLTAGE OUT CABLE 25FT

•Provides an isolated 0-10 VDC signal to the ECM at a maximum of 20 mA

•Used for QSK60 and QSK78 Cummins

3 THROTTLE CABLE - PULSE WIDTH (PW)

•Typically used with Caterpillar electronic control systems 3 MPID INTERFACE,J1708,J1939,OBDll,25ft,EN This system provides electronic engine communications.

Supported communications protocols.

• SAE 1708/J1587 • SAE J1939

•SAE J1850 VPW • SAE J1850 PWM

• SAE J2284 / ISO 15765(CAN) • ISO 9141-2

•ISO 14230-4 (KPW2000)

Provides a 25ft (7.6m) connecting cabler.

•Four (4) E-Stop buttons •1000ft (305m) of cable, connectors, cable tester and crimp tool

1 WEATHER STATION, NO CABLE,ENG,

•Mounts directly to DynPro2 enclosure •Relative humidity •Ambient temperature

3 IGNITION POWER SUPPLY, 12VDC 24VDC ADDON

•Not to be used as a power supply for Electric Starters Engine Cooling Items & Linear Throttle

•With legs/casters; wall-mount available on request •For primary engine circuit cooling •Temperature control allows operator to set temperature in the range of 160-205 deg. F and pressure from 0-15psig.

•Requires cool supply water

5 THROTTLE CONTROLLER, LINEAR SERVO, 25',

Reduced Downtime Spares Kit 1 MPID INTERFACE,J1708,J1939,OBDll,25ft,EN Supported communications protocols.

• SAE 1708/J1587 • SAE J1939

•SAE J1850 VPW • SAE J1850 PWM

• SAE J2284 / ISO 15765(CAN) • ISO 9141-2

•ISO 14230-4 (KPW2000)

Provides a 25ft (7.6m) connecting cabler.

Extended Warranty, year 2-5

- Extends original factory warranty period of 12 months to a total of 60 months (48 additional months of warranty Coverage) Service Startup System start-up will include a check of the final connections as necessary, commissioning, calibration, and operator training on the equipment purchased.

The training will cover basic system functionality including running pre-written automated tests (as applicable) and manual system operation. Connecting other devices, (if a capable system).