Sources Sought Attachment 2 PID.rtf

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:011608074

DISK,CLUTCH,VEHICULAR

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:CA070

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS118

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 10951083

REVISION NR E DTD 08/01/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 10951083

REVISION NR DTD 08/14/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 10951083

REVISION NR B DTD 12/15/2016

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:49

WRAP MAT:GH CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C

UNIT CONT:E5 OPI:O

INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:IP025 OBJECT TEXT ID ST LANGUAGE E

NSN:013160084

BRACKET, TOWING. CAST IRON.

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ016

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:ZD087

REFERENCE NUMBER:ZD047

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:ZD080

EXCEPTION TO DRAWING 12342404. NOTE 8: CAGE "19207" AND MFG CAGE MAY BE

INKED STAMPED IN LIEU OF CAST AS LONG AS P/N

IS CAST. "PER DLAD 52.209-9017, ALT III DISPOSITION OF FIRST ARTICLES:

THREE (3) FIRST ARTICLE SAMPLES WILL BE DESTROYED DURING TESTING. THE

REMAINING ONE (1) FIRST ARTICLE SAMPLE SHALL BE RETAINED BY THE

CONTRACTOR AND SERVE AS PRODUCTION STANDARDS. THE CONTRACTOR SHALL NOT

SUBMIT THE FIRST ARTICLE UNITS FOR ACCEPTANCE AS PART OF THE PRODUCTION

QUANTITY.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CQ015

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12342404

REVISION NR C DTD 09/30/2003

PART PIECE NUMBER:

IAW REFERENCE QAP 19207 12342404

REVISION NR C DTD 10/22/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469120

REVISION NR A DTD 11/29/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469122

REVISION NR A DTD 01/03/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12469113

REVISION NR A DTD 11/29/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342404

REVISION NR DTD 08/14/2024

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 SQAPCARCLTPHOS81361

REVISION NR DTD 12/01/2017

PART PIECE NUMBER:

IAW REFERENCE QAP 16236 CDRL-81361CARPH-17272

REVISION NR DTD 12/01/2017

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00

WRAP MAT:00 CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:D

UNIT CONT:D3 OPI:O

INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

1. REQUEST COGNIZANT DCMA QAR EVALUATE THE FOLLOWING:

A. INSPECTION RECORDS THAT SUPPORT CONFORMANCE TO ALL SPECIFIED

TECHNICAL REQUIREMENTS

B. QAR VERIFY QAP REQUIREMENTS,QAP 12342404

C. PERFORM INSPECTION OF ALL DIMENSIONS THAT ARE THREE DECIMAL POSITIONS

AND HIGHER.

NSN:014795233

WIRING HARNESS

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:A0003

REFERENCE NUMBER:CA070

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:CS147

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ001

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 12680565

REVISION NR DTD 06/18/2020

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19200 12614886

REVISION NR DTD 05/11/1987

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12287273

REVISION NR T DTD 07/17/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273163

REVISION NR U DTD 07/28/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273147

REVISION NR Y DTD 07/25/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 11654426

REVISION NR F DTD 07/28/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12273148

REVISION NR AC DTD 07/29/2023

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12491506

REVISION NR J DTD 06/15/2015

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12680565

REVISION NR DTD 01/21/2021

LINE ITEM 00004 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN:014962839

PARTS KIT, AIR FILTER.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

IAW BASIC DRAWING NR 16236 2590LTST-0016

REVISION NR C DTD 05/11/2005

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 16236 CS-4440-SV-0706

REVISION NR DTD 02/04/1991

LINE ITEM 00005 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

REFERENCE NUMBER:CS259 OBJECT TEXT ID ST

NSN:015219985

MAINTENANCE KIT, VEHICULAR.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ001

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 16236 2940L0007

REVISION NR A DTD 07/27/2004

LINE ITEM 00006 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER:ZD037 OBJECT TEXT ID ST

NSN:015231645

MAINTENANCE KIT,VEHICULAR

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

Exception to the drawing: When providing a given NSN, WEBPLIS approved cage and P/N's may also be used. RNCC-RNVC of 2-2, 3-2 and 5-2 may also be used. RNCC-RNVC codes 3-9 and 5-9 may not be used and are considered obsolete.

IAW BASIC DRAWING NR 16236 2940L0011

REVISION NR DTD 09/22/2006

PART PIECE NUMBER: 2940L0011

LINE ITEM 00007 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.

NSN:015231657

MODIFICATION KIT,VEHICULAR EQUIPMENT COMPONENTS

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ027

REFERENCE NUMBER:RA001

REFERENCE NUMBER:ZD064

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ006

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

ITEM NO. 3 DWG. 2940L0013, CAGE (34623) & P/N (5584462), LOCKWASHER IS A

CRITICAL ITEM. WHICH CAN HAVE SAFETY ISSUES IF PROCURED FROM UNAPPROVED

SOURCES. TRACEABILITY CERTIFICATION OF COMPLIANCE FROM AM GENERAL IS

ALSO REQUIRED FOR THIS COMPONENT I/A/W DLAD 52.211-9014 EXCEPTION:

DRAWING (16236) 2940L0013. PART NUMBER 534059 CAGE (80201) SHOULD BE

534059-60. EXCEPTION: DRAWING (16236) 2940L0013 NOTE 2 (TO BE ADDED)

WHEN PROVIDING A GIVEN NSN, WEBFLIS APPROVED CAGE AND P/N'S WITH

RNCC-RNVC OF: 2-2, 3-2 AND 5-2 MAY ALSO BE USED. RNCC-RNVC CODES 3-9

AND 5-9 MAY NOT BE USED AND ARE CONSIDERED OBSOLETE. THIS APPLIES TO

NSN'S 5330-01-456-3884, 5310-01-213-4185, 5310-01-176-0839,

5310-01-231-0596 & 5330-01-203-6551 ON DRAWING 2940L0013. NOTE: ITEM NO.

3 ON BASIC DWG NR 2940L0013 IS A CRITICAL ITEM WHICH CAN HAVE SAFETY

ISSUES. THIS ITEM RELATES TO THE AM GENERAL CAGE(34623) &

P/N(5584462). CERTIFICATION FROM AM GENERAL IS REQUIRED FOR THIS

COMPONENT.

At this time is kit is s et up as an Organic Kit until further notice. fo r questions call Derek Hurst @ 614-692-1759 or e-mail Derek.hurst@dla.mil Kitting Specialist Land Kitting Team

REFERENCE NUMBER:IKT02

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 16236 2940L0013

REVISION NR F DTD 07/31/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12342961

REVISION NR C DTD 09/14/2006

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12518720

REVISION NR DTD 07/02/2008

PART PIECE NUMBER:

IAW REFERENCE QAP 13873 CDRL-COQC-22104

REVISION NR DTD 04/08/2022

LINE ITEM 00008 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:00 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

NSN:015287239

PARTS KIT, SERVICE A1 LMTV

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RQ039

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RT001

REFERENCE NUMBER:ZD080

ALL QUANTITIES ARE TO BE THOSE PRESCRIBED ON DRAWING 57K4845, REFERENCE

PART NUMBER -002. PART NUMBER 12418424: SEE WEBFLIS FOR APPROVED CAGE

AND PART NUMBERS TO SUPPLY. ONLY RNCC-RNVC OF 3-2 AND 5-2 MAY BE USED.

ALL OTHER CODES ARE NOT VALID.

REFERENCE NUMBER:CQA01

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 57K4845

REVISION NR D DTD 12/21/2023

PART PIECE NUMBER: 57K4845-002

IAW REFERENCE QAP 14153 QAP-EQ001

REVISION NR B DTD 02/13/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER: 12418424-001

IAW REFERENCE QAP 14153 QAP-00506

REVISION NR G DTD 07/07/2003

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 QAP-EQ002

REVISION NR A DTD 03/10/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-002

REVISION NR DTD 03/02/2017

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 574845-002

REVISION NR DTD 03/31/2007

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 TACV9510

REVISION NR DTD 06/11/2012

LINE ITEM 00009 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0

UNIT CONT:00 OPI:M

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

NSN:015287243

SERVICE KIT,VEHICLE

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ041

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

ALL QUANTITIES ARE TO BE THOSE PRESCRIBED ON DRAWING 57K4845, REFERENCE

PART NUMBER -006. PART NUMBER 12418424: SEE WEBFLIS FOR APPROVED CAGE

AND PART NUMBERS TO SUPPLY. ONLY RNCC-RNVC OF 3/2 AND 5/2 MAY BE USED.

ALL OTHER CODES ARE NOT VALID.

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

REFERENCE NUMBER:ZD054

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 57K4845

REVISION NR D DTD 12/21/2023

PART PIECE NUMBER: 57K4845-006

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-006

REVISION NR DTD 03/13/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-006

REVISION NR A DTD 03/14/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 04/10/2012

LINE ITEM 00010 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:00

WRAP MAT:ZZ CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

ACCORDANCE WITH SPECIAL PACKAGING INSTRUCTION

(SPI) AK15287243, REV A DATED 03/14/2024.

PACKAIGNG SHALL BE IN ACCORDANCE WITH SPI # 7298738

5-22-2019

M. BOWERS 2-1754

NSN:015287507

PARTS KIT, SERVICE A1 MTV

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ042

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

ALL QUANTITIES ARE TO BE THOSE PRESCRIBED ON DRAWING 57K4845, REFERENCE

PART NUMBER -001. PART NUMBER 12418424: SEE WEBFLIS FOR APPROVED CAGE

AND PART NUMBERS TO SUPPLY. ONLY RNCC-RNVC OF 3-2 AND 5-2 MAY BE USED.

ALL OTHER CODES ARE NOT VALID.

REFERENCE NUMBER:CA070

REFERENCE NUMBER:CS187

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 57K4845

REVISION NR D DTD 12/21/2023

PART PIECE NUMBER: 57K4845-001

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER: 2418424-001

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-001

REVISION NR DTD 02/26/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-001

REVISION NR A DTD 02/28/2024

LINE ITEM 00011 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

(SPI) AK15287507 REV A , DATED 2/28/2024.

NSN:015287508

PARTS KIT, SERVICE AO MTV PN 7E9763 CAGE 11083[NSN 2910-01-363-3089]

listed on DWG 57K4845 REV B is cancelled and replaced with PN 1R0750

CAGE 11083 [NSN 2910-01-444-9487] ALL QUANTITIES ARE TO BE THOSE

PRESCRIBED ON DRAWING 57K4845, REFERENCE PART NUMBER -005. SEE WEBFLIS

FOR APPROVED CAGE AND PART NUMBERS TO SUPPLY. ONLY RNCC-RNVC OF 3-2 AND

5-2 MAY BE USED. ALL OTHER CODES ARE NOT VALID.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ039

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

IAW BASIC DRAWING NR 19207 57K4845

REVISION NR D DTD 12/21/2023

PART PIECE NUMBER: 57K4845-005

IAW REFERENCE QAP 14153 QAP-EQ001

REVISION NR B DTD 02/13/1996

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER:

IAW REFERENCE QAP 14153 QAP-EQ002

REVISION NR A DTD 03/10/2003

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-005

REVISION NR DTD 03/13/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-005

REVISION NR A DTD 03/14/2024

LINE ITEM 00012 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:D3 OPI:M

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:00 -00 No special marking

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

Packaging shell in accordance with SPI 277795 M. Bowers 2-1754

NSN:015336748

PARTS KIT, SPECIALIZED.

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ039

REFERENCE NUMBER:ZD054

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:RQ009

REFERENCE NUMBER:RQ011

ALL QUANTITIES ARE TO BE THOSE PRESCRIBED ON DRAWING 57K4845, REFERENCE

PART NUMBER -003. PART NUMBER 12418424: SEE WEBFLIS FOR APPROVED CAGE

AND PART NUMBERS TO SUPPLY. ONLY RNCC-RNVC OF 3-2 AND 5-2 MAY BE USED.

ALL OTHER CODES ARE NOT VALID.

REFERENCE NUMBER:CS187

REFERENCE NUMBER:CA070

CRITICAL APPLICATION ITEM

IAW BASIC DRAWING NR 19207 57K4845

REVISION NR D DTD 12/21/2023

PART PIECE NUMBER: 57K4845-003

IAW REFERENCE DRAWING NR 19207 12418424

REVISION NR C DTD 06/11/2012

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 12424710

REVISION NR A DTD 10/25/2011

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-003

REVISION NR DTD 03/25/2024

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 19207 57K4845-003

REVISION NR A DTD 03/28/2024

LINE ITEM 00013 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA - MIL-STD-2073-1E

QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ

WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z

UNIT CONT:ZZ OPI:A

INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ

PACK CODE:U

MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.

SPECIAL MARKING CODE:ZZ -ZZ Special Requirements

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

PRESERVATION, PACKAGING, AND PACKING SHALL BE IN

(SPI) AK15336748<(>,<)> REV A DATED 3/28/2024.

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER CA070

FULL AND OPEN COMPETITION APPLY

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER CS118

FULL AND OPEN COMPETITION APPLIES.

REFERENCE NUMBER CS187

CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE

USED NOR INCORPORATED IN ANY ITEMS TO BE

DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION

SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT

DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.

SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR

APPROVAL UNLESS THEY ARE AUTHORIZED BY THE

SPECIFICATION REQUIREMENTS.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ001

RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS

(MANUFACTURERS AND NON-MANUFACTURERS)

REFERENCE NUMBER RQ009

RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN

REFERENCE NUMBER RQ016

RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS

LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A

SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR

QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN

PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED

MANUFACTURERS LIST (QML)" APPLY.

REFERENCE NUMBER RT001

RT001: MEASURING AND TEST EQUIPMENT

REFERENCE NUMBER ZD087

THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH MUST MEET QPL/QML

REQUIREMENTS. BY SUBMITTING AN OFFER, THE OFFEROR AGREES TO PROVIDE

QPL/QML COMPONENTS ONLY FROM SOURCES QUALIFIED ON THE APPLICABLE

QPL(S)/QML(S).

REFERENCE NUMBER ZD047

Casting and Forging information was added to the POT to enhance the solicitation process. Please do not remove. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/;

(Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil.

REFERENCE NUMBER CQ015

"FINAL INSPECTION AND ACCEPTANCE OF THE ITEM

SHALL BE AT THE ACTUAL MANUFACTURING FACILITY.

TECHNICAL INSPECTION IS REQUIRED. THE

CONTRACTOR SHALL MAKE DRAWINGS AND TECHNICAL

INFORMATION AVAILABLE TO VERIFY THAT THE ITEM

MEETS ALL TECHNICAL REQUIREMENTS.

COUNT, KIND, AND CONDITION INSPECTIONS ARE

NOT ACCEPTABLE. THIS NOTE TAKES PRECEDENCE OVER

MASTER SOLICITATION PART ONE PROVISIONS, NOTE 6,

QUOTATIONS BY NON-MANUFACTURERS (APR 1984,

DCSC 52.217-9C01). FINAL INSPECTION OF

PACKAGING, IF REQUIRED, MAY BE CONDUCTED

ELSEWHERE."

REFERENCE NUMBER A0003

MIL-STD-130N(1) DATED 16 NOV 2012.

IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY

REFERENCE NUMBER CS147

"THIS NSN CONTAINS ONE OR MORE COMPONENTS WHICH

MUST CONFORM TO SOURCE CONTROL DRAWING. BY

SUBMITTING AN OFFER, THE OFFEROR AGREES TO

PROVIDE SOURCE CONTROLLED COMPONENTS FROM

SOURCES APPROVED ON THE APPLICABLE SOURCE

CONTROL DRAWING."

REFERENCE NUMBER CS259

"PRESERVATION & PACKAGING SHALL BE

I/A/W THE LATEST REVISION OF MILITARY

SPECIFICATION MIL-STD-2073-1 APPENDIX D,

FOR PACKAGING OF "KITS".

REFERENCE NUMBER IKT02

KIT QUALITY PROVISION

1. THIS REQUIREMENT APPLIES TO MATERIAL SUPPLIED

TO THE GOVERNMENT AS A KIT.

2. THE CONTRACTOR SHALL COMPLY WITH ALL

APPLICABLE QUALIFIED PRODUCTS LIST (QPL)

REQUIREMENTS FOR THE KIT COMPONENTS BEING

SUPPLIED.

3. THE CONTRACTOR SHALL INCORPORATE A SYSTEM FOR

OBTAINING, HANDLING AND SUPPLYING ORIGINAL

EQUIPMENT MANUFACTURER (OEM) CERTIFIED PARTS

INTO ALL CONTRACTUAL DOCUMENTS ENTERED INTO WITH

ITS VENDORS.

4. THE CONTRACTOR SHALL IMPLEMENT AN INSPECTION

SYSTEM, WHICH WILL INCLUDE INSPECTION OF ALL

PARTS UPON RECEIPT TO ENSURE CONFORMANCE WITH

REQUIREMENTS AND TO ENSURE THAT THEY ARE NOT

DAMAGED.

5. THE CONTRACTOR SHALL MAINTAIN A SYSTEM OR

PROCESS THAT WILL ENSURE TRACEABILITY OF ALL

PARTS, THROUGH AN UNBROKEN SUPPLY CHAIN, TO THE

MANUFACTURER.

6. THE CONTRACTOR'S INSPECTION SYSTEM AND

PROCEDURE FOR ENSURING PARTS TRACEABILITY SHALL

BE AVAILABLE FOR REVIEW BY THE GOVERNMENT AT THE

REQUEST OF THE CONTRACTING OFFICER.

7. THE CONTRACTOR SHALL FURNISH ONLY THOSE PARTS

THAT ARE KNOWN TO BE ACCEPTABLE TO THE

GOVERNMENT, I.E. SOLE SOURCE PARTS, APPROVED

SOURCE PARTS, ACCEPTABLE SOURCE PARTS, AS

REFLECTED IN THE GOVERNMENT'S CONTRACT

TECHNICAL DATA FILE (CTDF).

8. UNLESS OTHERWISE APPROVED IN ADVANCE BY THE

CONTRACTING OFFICER, THE CONTRACTOR SHALL SUPPLY

ONLY NEW AND UNUSED PARTS THAT ARE NOT

GOVERNMENT SURPLUS PARTS.

REFERENCE NUMBER ZD037

COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN

ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W

MIL-STD-129.

PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT

TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE

THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT

(THAT IS, 1 OF 2, 2 OF 2, ETC.)

CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE

OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS

WITHIN THE KIT.

REFERENCE NUMBER RQ027

A. Data required by this document will be included in the price of the procured item(s).

B. The supplier shall prepare and furnish one (1) copy of the Certificate of Quality Compliance (COQC) for all delivered supplies. If the supplies delivered under this contract are from more than one manufacturing lot, a separate one (1) copy of the COQC shall be prepared and furnished for each manufacturing lot represented by, manufactured or produced under a product specification, original equipment manufacturer (OEM)/manufacturer's part number, commercial, industry or military standard, or drawings, or other technical data. Each Certificate shall be prepared in accordance with the Supplemental Quality Assurance Provision (SQAP).

C. For contracts assigned for Government inspection at source, the supplier shall have the completed Certificate available for review by the Government representative when the material is presented for acceptance by the Government. The Government representative can sign off on the WAWF receiving report so long as the Contractor complied with the COQC and the documentation is uploaded as an attachment to the Production CLIN in iRAPT.

D. An electronic copy of each COQC, for Government records retention, shall be entered into the Invoicing, Receipt, Acceptance and Property Transfer (iRAPT) system by the supplier via the Attachment tab of the Receiving Report (RR). Instructions for entering Attachments can be found in the iRAPT - Web Based Training Main Menu under "Attachments which can be viewed at https://wawfraid.nit.disa.mil/wawfwbt/xhtml/unaut h/web/wbt/wawfra/Attachments.xhtml. If the supplier offering the material to the Government is not the manufacturer material, the supplier is responsible for obtaining a certified test report from the manufacturer, including it as part of this COQC, and for demonstrating that the specific material being offered under this Certificate is covered by the certified test report. The data submittal listed above is in addition to the other iRAPT requirements included in this contract. Whenever access to the iRAPT system is limited or not available, the supplier shall notify the PCO and request permission to submit documents manually until the iRAPT system is again available for use. Unless otherwise specified by the contract, the supplier shall be responsible for retaining the Certificate for a period of 4 years. When requested by the Contracting Officer, the supplier shall make the Certificate available for review by the Government at any time during the period the Certificate is required to be retained.

E. No Certificate of Conformance (COC) or alternate release is authorized.

End of Requirement

REFERENCE NUMBER ZD064

The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.

REFERENCE NUMBER RQ006

RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS

REFERENCE NUMBER RQ039

RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers

REFERENCE NUMBER CQA01

QUALITY ASSURANCE PROVISION

REFERENCE NUMBER RQ041

RQ041: GOVERNMENT PURPOSE RIGHTS, LICENSE AGREEMENT 36 APPLIES

A Government Purpose Rights, License Agreement 36 restricted technical data package exists for this item. Data Non-Disclosure Agreement conditions and DFARS 252.227-7025 apply. Vendors must complete and return the form located in the "36 Government Purpose Rights" License Agreement folder available on cFolders at https://pcf1x.bsm.dla.mil/cFolders.

REFERENCE NUMBER ZD054

CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,

UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.

REFERENCE NUMBER RQ042

RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers