Sources Sought ACTIVE DDS FY26 70Z080ACTIVEDDS26.pdf

USCGC ACTIVE (WMEC 618) DRYDOCK AVAILABILITY FY2026

1 (Rev-0)

SOURCES SOUGHT NOTICE

USCGC ACTIVE (WMEC 618)

DRYDOCK REPAIRS FY26

70Z080ACTIVEDDS26

This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply.

Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action.

REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Norfolk, VA to identify sources capable of providing the following:

DRYDOCK REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform Drydock Repairs to the U.S. Coast Guard Cutter (USCGC) ACTIVE (WMEC 618), a 210-foot A-Class, Medium Endurance Cutter. The vessel is home ported in Port Angeles, WA. All work will be performed at the contractor’s facility. There is no geographical restriction for this cutter.

SCOPE OF WORK: The scope of the acquisition is for the Drydock Repairs of the USCGC ACTIVE (WMEC 618). This work will include, but is not limited to the following Work Items:

WORK ITEM 1: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 2: U/W Body, Preserve, 100 percent WORK ITEM 3: Hull Plating Freeboard, Preserve, 100 Percent WORK ITEM 4: Appendages (U/W), Preserve (Internal) and Leak Test WORK ITEM 5: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 6: Voids (Non-Accessible), Preserve (Internal) and Leak Test WORK ITEM 7: Tanks, Potable Water, Clean and Inspect WORK ITEM 8: Mast, Preserve, 100 Percent WORK ITEM 9: Propulsion Shafting, Strain Gauge Alignment, Drydock, Check WORK ITEM 10: Propulsion Propeller Shaft Coating, Inspect and Test WORK ITEM 11: Propulsion Shaft Seal (Mechanical And Inflatable) Assemblies, Inspect And

Repair Or Renew WORK ITEM 12: Propulsion Shaft Bearings, External, Check Clearances WORK ITEM 13: Controllable Pitch Propellers, Clean and Inspect WORK ITEM 14: Controllable Pitch Propeller (CPP) System, Inspect and Service WORK ITEM 15: Controllable Pitch Propeller (CPP) Hubs, Inspect (Optional) WORK ITEM 16: Controllable Pitch Propeller (CPP) Hubs, Renew (Optional) WORK ITEM 17: Emergency Diesel Generator, Exhaust Piping, Clean and Inspect WORK ITEM 18: Fathometer Transducer, Renew

2 (Rev-0)

WORK ITEM 19: Doppler Speed Log Transducer, Clean and Inspect WORK ITEM 20: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 21: Sea Strainers, Duplex, All Sizes, Overhaul WORK ITEM 22: Rudder Assemblies, Inspect and Repair WORK ITEM 23: Tanks, Potable Water Preserve, 100 Percent WORK ITEM 24: Superstructure, Preserve, 100 Percent WORK ITEM 25: Cathodic Protection, Zinc Anodes, Renew WORK ITEM 26: Drydock WORK ITEM 27: Temporary Services, Provide - Cutter WORK ITEM 28: Ships Service and Shore Tie Circuit Breakers, Upgrade WORK ITEM 29: Whistle Timer, Replace WORK ITEM 30: Oily Water Separator, Replace WORK ITEM 31: Potable Water Tanks, Repair WORK ITEM 32: Oily Water Holding Tank, Repair WORK ITEM 33: Chain Lockers, Repair and Preserve WORK ITEM 34: Tanks and Voids, Partial Preservation WORK ITEM 35: Sewage System, Repair and Preserve WORK ITEM 36: Hull Plating, Repair WORK ITEM 37: Rudder Stock Housing, Inspect and Repair WORK ITEM 38: Inflatable Shaft Seal Assemblies, Piping and Valves, Renew WORK ITEM 39: Fuel Valves and Piping, Renew WORK ITEM 40: Engine Flywheel Disc Coupling, Renew

ANTICIPATED PERIOD OF PERFORMANCE: The period of performance is anticipated to be for seventy (70) calendar days with a start date of January 13, 2026, and end date of March 23, 2026. (Subject to change at the discretion of the Government)

ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,300 employees.

SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. Companies may respond to this Sources Sought Notice via e-mail to Petal.C.Donald@uscg.mil no later than 4:00 pm on Monday, July 07, 2026, Eastern Time (ET) with the following information/documentation:

1. Name of Company, Address and Unique Entity ID.

2. Point of Contact and Phone Number.

3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g.

Small Business Concern; h. Large Business Concern

4. Documentation Verifying Small Business Certification:

3 (Rev-0)

a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA.

b. If claiming HuBZone status, provide a copy of your HuBZone Certificate from SBA.

c. If claiming SDVOSBC status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611.

d. If claiming VOSBC status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611.

e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are “economically disadvantaged”, and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million

f. If claiming Woman Owned Small Business status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours.

The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611.

g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611.

5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice.

6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance

4 (Rev-0) information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant.

SAM: Interested parties should register in the System for Award Management (SAM), formerly known as Central Contractor Registration (CCR), as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov or by calling 1-866-606-8220.

Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when deciding on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. Currently no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a combined synopsis/solicitation may be published on the Government Point of Entry (SAM.gov). It is the potential offeror's responsibility to monitor SAM.gov for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.

http://www.sam.gov/