SOR Simulated Firing Range.pdf

Statement of Requirements Simulated Weapon Training System 42 ABW

1.0 PURPOSE. The 42nd Air Base Wing at Maxwell AFB has a requirement for a smokeless indoor firing range system including simulated M4 and M18 weapon platforms.

2.0 DESCRIPTION OF ITEMS. The following items are required for performance under this contract:

2.1 Firearms Trainer Simulator Combo Software w/ short throw camera Qty: 2

2.1.1 Must be capable of supporting up to six shooters with individual scores per participant.

2.1.2 Must be capable of providing targets set between 75 to 300 meters

2.1.3 Must be capable of showing individual shot location

2.2. M18 Trainer weapon w/IR Laser Qty: 12

2.2.1 Must have full blowback action to simulate recoil, powered by green gas.

2.2.2 Must be the same dimensions as the M18 pistol (size and weight)

2.2.3 Must have a removable magazine

2.2.4 Must have an Optic Cut Slide

2.2.5 Must be a laser based training weapon usable on the offered simulator with reactive targets.

2.3. M18 Trainer Weapon Magazine Qty: 12

2.3.1 Must be compatible with offered M18 trainer weapon

2.4 M4 training weapon w/IR Laser Qty:12

2.4.1 Must have full blowback action simulating recoil

2.4.2 Must be the exact weight and size of the M4 weapon platform.

2.4.3 Must have functional parts to include

2.4.3.1 Charging Handle

2.4.3.2 Removable Magazine

2.4.3.3 Magazine release button

2.4.3.4 Safety/Fire Selector

2.4.3.5 Forward Assist

2.4.3.6 Dust Flap

2.4.3.7 Bayonet Lug

2.4.3.8 Iron Sights

2.4.3.9 Forward Hand Guard

2.4.3.10 Sling Mounts

2.4.4 Must be a laser based training weapon usable on the offered simulator with reactive targets.

2.5 M4 Trainer Weapon Trainer Magazines Qty: 24

2.5.1 Must be compatible with M4 Training Weapon

2.6 Extra Laser Batter Packs Qty 24

3.0 DELIVERY REQUIREMENTS:

3.1 Delivered to

Air War College

325 Chennault Cir

Bldg 1401, Rm 1005A

Maxwell AFB, Al 36112

4.0 STANDARD WARRANTY: The contractor shall provide any Original Equipment Manufacturer (OEM) standard commercial warranty applicable to the products being purchased at no additional cost to the Government.

4.1 Prior to project acceptance, the contractor shall provide the customer with all manufacturer warranties as needed for any component incorporated into this project such as equipment manuals, literature, CDs and DVDs and other documentation on all equipment and software.

4.2 Prior to project acceptance, the contractor shall provide written procedures, points of contact within company, and required information for all warranty services prior to project acceptance. This information shall include written confirmation of the warranty period, phone numbers and contact information/procedures for technical support, troubleshooting assistance, and replacement of faulty equipment and software.

6.0 GENERAL INFORMATION: Items must be brand new. Refurbished items are not authorized.