SOO - Conduit.docx
DOCX document 444 KB Posted
- Attached to
- Building 400 Mod 17/19 Conduit Install Federal contract opportunity
- Solicitation number
- FA255023Q0062
About this file
This document outlines requirements for a conduit installation project at Joint Task Force-Space Defense mods 17 & 19. The contractor will purchase materials and install EMT conduit to connect the mod 19 server room to two offices in the command section of mod 17. The conduit path will follow existing PDSM communication lines through the perimeter wall and hallway, terminating in two opposing offices. The contractor must install junction boxes where the lines split and attach the conduit to the raised floor system using appropriate hardware. Additionally, the contractor shall ground and bond the conduit as required and install pull string along the entire length to facilitate future cable installation by the government. The related federal contract opportunity is solicitation number FA255023Q0062 for the building 400 mod 17/19 conduit installation project through the Department of the Air Force Space Command.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Mod 1719 Conduit Install Combo.docx | DOCX document |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
EMT Conduit Install Mod 17 & 19
JTF-SD/NSDC
TABLE OF CONTENTS
| Title Page. | 1 |
| TABLE OF CONTENTS | 2 |
| Contractor SCOPE OF WORK | 3 |
| Floorplan/Diagram | 4 |
STATEMENT OF Objectives The Joint Task Force-Space Defense mods 17 & 19 will require EMT conduit to be installed to connect mod 19 server room to two offices in the command section of mod 17. The contractor will need to purchase all materials to execute the project. Escorts will be provided by the government. Work hours are from 8-4 MST excluding federal holidays.
Mod 19 Server Room to Mod 17 Command Section
· The contractor will install EMT conduit and all other associated hardware to span through the perimeter wall towards Mod 17. The penetration must meet ICD 705/STC 50 rating. J boxes can be installed at 90° turns if space allows.
· The conduit will need to follow the path of the currently installed PDSM comm lines. The PDSM comm lines follow the path of the hallway towards the command staff. From there, the two comm lines split directions, terminating in two opposing offices. The contractor will install a J box where the comm lines split and continue the conduit to each of the two offices.
· The conduit installed needs to be attached to the upright struts of the raised floor system using appropriate hardware. Also, the conduit shall be grounded and bonded as required by Schriever Air Force Base Instruction 17-201 (C4 Systems Configuration Management).
· Additionally, pull string shall be installed along the entire length of conduit to facilitate cable install (cable install performed by Government Information Owner only).
J,----[,; ]----.\ ,-=="'i"---a=======q=-rl \ Approximate layout of conduit depicted in red. This is the floorplan of Mod 17 & Mod 19.
Room 1S image6.jpeg image7.jpeg image8.jpeg image1.jpeg image2.jpeg image3.jpeg image4.jpeg image5.jpeg
File details come from the government source that posted it. Updated .