Solicitation W912BV20Q0142.pdf

SEE ADDENDUM

(No Collect Calls)

W912BV20Q0142 24-Jul-2020

b. TELEPHONE NUMBER 8. OFFER DUE DATE/LOCAL TIME

02:00 PM 24 Aug 2020

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

W912BV9. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

MIEKO G ALLEY

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

CONTRACTING DIV

US ARMY CORPS OF ENGINEERS, TULSA DISTRICT

2488 E. 81ST STREET

TULSA OK 74137-4290

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE 16. ADMINISTERED BY

SEE SCHEDULE

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

918-669-7436FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

$8,000,000

NAICS:

561790

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF66

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

W912BV20Q0142

Section A - Solicitation/Contract Form

INSTRUCTIONS TO OFFERORS

Instructions to Offerors

MAIL, FAX, EMAIL or HAND DELIVER YOUR DOCUMENTS

Do not include excess information, such as audio-visual materials, electronic media, CD’s, thumb drives, etc. or pages of the solicitation that do not contain information provided by the perspective offeror. NO cross-outs or strike-through marks. Submit a legible quote with no correction marks.

EMAIL

Emailed quotes must be received in a supported Adobe or Microsoft Office file format. These formats are the only acceptable methods of submitting a quote electronically. Cloud storage providers, google docs, web based drop boxes, OneNote/OneDrive, URLs, web-based format, or any other virtual/web-based memory service are NOT acceptable methods of submitting a quote electronically. All documents must be attached in one file. Reference the solicitation in the subject line. Send quotes to E-mail address CESWT‐CT‐SS‐Quotes@usace.army.mil and copy Mieko.G.Alley@usace.army.mil. Ensure your quote is received before the due date and time. In order for your quote to be considered responsive, all required materials must be received before the due date and time. If all required materials are not received, your quote will not be considered.

FAX or MAIL Include a cover sheet that references the Contract Specialist – Mieko Alley and the solicitation number.

When submitting through mail ensure you clearly mark the envelope to:

U.S. Army Corps of Engineers, Tulsa District Mieko Alley, CESWT-CT-E 2488 E. 81st Street Tulsa, OK 74137-4290

Clearly mark the envelope in the lower left hand corner with the solicitation number, W912BV20Q0142.

All pages should be numbered. Use only 8 ½” x 11” paper for fax or mail submissions. Do not use fold-outs (e.g., 11” x 14” or 11” x 17” sheets). Do not use a font size smaller than 10, or condensed print for any submission. Times New Roman or Arial Font are the only acceptable fonts. All page margins must be at least 1 inch wide, but may include headers and footers. Illegible handwritten quotes will not be considered. Typed quotes are highly encouraged and the preferred method. Do not use spring clamps, staples, or exceed the recommended capacity of the fastener or binder. Do not use plastic multi-hole/spiral binding systems, heat binding systems, or other systems which do not facilitate the ready insertion of additional pages or removal of pages. DO NOT use tabbed dividers, flagged tabs, or any divider that extends beyond the paper size to separate sections. The pages must be able to be removed from their binding without ripping or tearing. Ensure to allow enough time to submit your quote before the due date and time.

HAND DELIVER

If your submission will be hand-carried, please provide notification to the Contract Specialist, at least one working day in advance, by calling (918) 669-7355 or e-mailing Mieko.G.Alley@usace.army.mil, as unescorted visitors are not allowed in the Contracting Division offices. Please consider that upon arrival, visitors must go through security check points on the 16th floor of the 20-story Building. Offerors can only submit their documents to the Contract Specialist or a Contracting Officer of the Tulsa District Office. The Tulsa District Office is located in the 20-story building of the CityPlex towers, address below:

U.S. Army Corps of Engineers, Tulsa District 2488 E. 81st Street Tulsa, OK 74137-4290

Face coverings must be worn to enter the Cityplex Towers.

DOCUMENTS

Please submit the following documents:

1) Complete a signed copy of the first page of the solicitation and all amendments, including CAGE code/DUNS number

2) Complete the pricing schedule, provided in the solicitation

3) Include a list of past projects that are similar in scope. List show be no more than one page. Past projects should specify is contractor was the prime or a subcontractor and be at least 60% complete. Please include contract number, date of completion, total dollar amount, customer information and point of contact, brief description of work completed.

4) Complete all FAR Clauses, with applicable blanks filled in from SECTIONS I, K, and L. If information is already completed in the System for Awards Management (https://www.sam.gov/) then write “SAM”

5) Complete the sub-contractor data, provided in the solicitation - your quote must identify the business size and percentage of work to be completed by the prime contractor; and the business name, address, the percentage of work to be completed by the subcontractor and business size of any subcontractors, if applicable, based on the NAICS code identified. Offerors must clearly identify whether a subcontractor(s) will be performing work, the percentage of work to be performed by each subcontractor, and the socio-economic category into which each identified subcontractor falls. (FAR 52.219-14 LIMITATIONS ON SUBCONTRACTING (DEVIATION 2019-

O0003) (JAN 2019))

Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.

Quotes should be valid through 30-Sep-2020.

INQUIRIES – OFFEROR’S QUESTIONS AND COMMENTS

USE OF BIDDER’S INQUIRY

Prospective offerors shall submit questions and inquiries related to this solicitation in accordance with the following (no other means of questions or inquiries will be answered except through Bidder Inquiry):

For information related to amendments, and the dates set for receipt of proposals, please check https://beta.sam.gov.

Contractual and Technical inquiries and questions relating to proposal procedures are to be submitted via Bidder Inquiry in ProjNet at https://www.projnet.org/projnet.

1. To submit and review bid inquiry items, offerors will need to be a current registered user or self‐register into the system. To self‐register go to the aforementioned web page and click on the BID tab. Select Bidder Inquiry, select agency USACE, and enter the Bidder Inquiry Key for this solicitation listed below, your e‐mail address, and then click login. Fill in all required information and click create user. Verify that information on next screen is correct and click continue.

2. From this page, you may view all bidder inquiries or add an inquiry.

3. Bidders will receive an acknowledgement of their question via e‐mail, followed by an answer to their question after it has been processed.

The Solicitation Number is: W912BV20Q0142

The Bidder Inquiry Key is: 9NTH36-PKVJR3

The Bidder Inquiry System will be unavailable for new inquiries 2:00 PM CST Wednesday, 19 August 2020 in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary.

4. Offerors are requested to review the specification in its entirety, and review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry.

5. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800‐428‐HELP.

6. Offers will NOT be publicly opened. Information concerning the status of the evaluation and/or award will NOT be available after receipt of proposals.

7. The point of contact for this solicitation is:

Contract Specialist: Mieko Alley Telephone: 918‐669‐7355 E‐mail: Mieko.G.Alley@usace.army.mil

PREPROPOSAL/SITE VISIT CONFERENCE

A Pre-proposal Conference will be held on 18 August 2020 at 10:00 a.m. CST at the Marion Reservoir Project Office, 2105 N. Pawnee Road, Marion, KS 66861. The Site Visit will allow prospective Contractors an opportunity to view the site conditions first hand. Questions must be posed using Bidder’s Inquiry as per the instructions above.

Only one representative is allowed per contractor. Valid Government-issued photo identification (drivers license) is required. Contractor must bring PPE, which includes hardhat, steel toed shoes, appropriate safety glasses, and a face covering.

All contractor personnel are required to wear cloth face coverings when they cannot maintain six feet of social distance in public areas or work centers while on Department of Defense property, installations, or facilities. The required cloth face covering may be fashioned from household items or common materials, such as clean T-shirts or other clean cloths that can cover the nose and mouth area. For reference, see CDC Tips for Face Covering Use available at: https://www.cdc.gov/coronavirus/2019-ncov/preventgetting-sick/diy-cloth-face-coverings.html. Please note the Government will not be issuing medical personal protective equipment (PPE) for this purpose, and it will be the responsibility of the contractor to ensure their personnel comply with this guidance.

ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Government will provide the successful offeror with the required Army iWatch Antiterrorism Briefing documentation within two (2) business days of Contract Award.

In accordance with AFARS 5132.702(a)(ii)(B): “Funds are not presently available for this acquisition. No contract award will be made until appropriated funds are made available.”

Section B - Supplies or Services and Prices

BID SCHEDULE

BID SCHEDULE

Contractor Name:

Solicitation No.: W912BV20Q0142

Project Location: Marion Reservoir in Marion, Kansas

Description: Structure Descaling & cleaning of monolith drains, collection channels/sumps & foundation drains

Line Item Number

Description of Services Qty Unit of Issue

Unit Price Total

Base tasks as defined in SOW for the descaling of eight (8) monolith drains along with the two (2) collection channels, and one (1) collection sump

1 job

For below options, please refer to SOW for specifications and requirements of descaling foundation drains

Optional Drain FD44

Depth of drain lost (build-up to be removed) - 0.4 feet

1 each

Optional Drain FD43

Depth of drain lost (build-up to be removed) - 1.9 feet

1 each

Optional Drain FD42

Depth of drain lost (build-up to be removed) - 0.3 feet

1 each

Optional Drain FD41

Depth of drain lost (build-up to be removed) - 0.2 feet

1 each

Optional Drain FD40

Depth of drain lost (build-up to be removed) - 0.5 feet

1 each

Optional Drain FD39

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD38

Depth of drain lost (build-up to be removed) - 1.2 feet

1 each

Optional Drain FD37

Depth of drain lost (build-up to be removed) - 0.8 feet

1 each

Optional Drain FD36

Depth of drain lost (build-up to be removed) - 0.1 feet

1 each

Optional Drain FD35

Depth of drain lost (build-up to be removed) - 0.2 feet

1 each

Optional Drain FD34

Depth of drain lost (build-up to be removed) -1.2 feet

1 each

Optional Drain FD33

Depth of drain lost (build-up to be removed) - 0.1 feet

1 each

Optional Drain FD32

Depth of drain lost (build-up to be removed) - 0.1 feet

1 each

Optional Drain FD31

Depth of drain lost (build-up to be removed) - 0.2 feet

1 each

Optional Drain FD30

Depth of drain lost (build-up to be removed) - 0.1 feet

1 each

Optional Drain FD29

Depth of drain lost (build-up to be removed) - 0.6 feet

1 each

Optional Drain FD28

Depth of drain lost (build-up to be removed) - 0.9 feet

1 each

Optional Drain FD27

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD26

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD25

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD24

Depth of drain lost (build-up to be removed) - 0.6 feet

1 each

Optional Drain FD23

Depth of drain lost (build-up to be removed) - 0.4 feet

1 each

Optional Drain FD22

Depth of drain lost (build-up to be removed) - 0.5 feet

1 each

Optional Drain FD21

Depth of drain lost (build-up to be removed) - 4.9 feet

1 each

Optional Drain FD20

Depth of drain lost (build-up to be removed) - 0.2 feet

1 each

Optional Drain FD19

Depth of drain lost (build-up to be removed) - 6.0 feet

1 each

Optional Drain FD18

Depth of drain lost (build-up to be removed) - 0.3 feet

1 each

Optional Drain FD17

Depth of drain lost (build-up to be removed) - 0.1 feet

1 each

Optional Drain FD16

Depth of drain lost (build-up to be removed) - 0.4 feet

1 each

Optional Drain FD15

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD14

Depth of drain lost (build-up to be removed) - 0.4 feet

1 each

Optional Drain FD13

Depth of drain lost (build-up to be removed) - 0.6 feet

1 each

Optional Drain FD12

Depth of drain lost (build-up to be removed) - 0.2 feet

1 each

Optional Drain FD11

Depth of drain lost (build-up to be removed) - 0.5 feet

1 each

Optional Drain FD10

Depth of drain lost (build-up to be removed) - 0.8 feet

1 each

Optional Drain FD09

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD08

Depth of drain lost (build-up to be removed) -0.2 feet

1 each

Optional Drain FD07

Depth of drain lost (build-up to be removed) - 1.0 feet

1 each

Optional Drain FD06

Depth of drain lost (build-up to be removed) - 0.9 feet

1 each

Optional Drain FD05

Depth of drain lost (build-up to be removed) - 0.6 feet

1 each

Optional Drain FD04

Depth of drain lost (build-up to be removed) - 0.3 feet

1 each

Optional Drain FD03

Depth of drain lost (build-up to be removed) - 0.0 feet

1 each

Optional Drain FD02

Depth of drain lost (build-up to be removed) - 1.6 feet

1 each

Optional Drain FD01

Depth of drain lost (build-up to be removed) - 1.0 feet

1 each

Total Base Tasks Total Base and All

Options

SUBCONTRACTING INFORMATION

SUB-CONTRACTING INFORMATION:

Self-Performing:

Name of Prime Contractor

Business Size of Prime contractor

Percentage of Work To Be Completed by Prime Contractor

Sub-Contractor (if applicable):

Name of Sub-Contractor

Address

Business Size and Socio-economic Category

Percentage of Work to be

Completed by Sub-Contractor

Section C - Descriptions and Specifications

SCOPE OF WORK

SCOPE OF WORK

Descaling and Cleaning of Monolith Drains, Collection Channels and Sumps, and Foundation Drains within the Marion Reservoir Structure Marion, Kansas

Solicitation No. W912BV20Q0142

PART 1 – GENERAL

1.1 SCOPE OF WORK

The contractor shall provide labor, equipment, and materials needed to de-scale, clean and remove calcium and other mineral build-up present in the piping and concrete drains associated with the Marion Structure. The cleaning processes of this build-up must not adversely affect the parent material of the infrastructure such as the concrete and piping systems. Any and all material freed or collected from the cleaning activity must be removed from the structure.

Final product will result in infrastructure draining systems that are fully functioning with little flow restriction to water transport from the various drains until reaching the sump collection location. The work site will be located at the Marion Reservoir approximately 1 mile from the Marion project office located at 2105 Pawnee road, Marion Kansas 66861.

General work site will be identified by the USACE Marion Reservoir POC.

1.2 REFERENCES

Please See Attachment 1 for the following: Satellite view of the general region and a closer satellite view of the facility location, photographs of an example of problem points associated with mineral build-up of different components. Please note that these photographs are references only and do not depict specific repair points.

1.3 BASIS FOR PAYMENT

Payment will be made in a lump sum upon completion of work.

1.4 WORK HOURS

Regular work hours will be from 8:00 am- 4:30 pm Monday through Sunday, excluding federal holidays. Once established, any proposed changes to the work hours must be approved by the Site Manager.

1. 5 SAFETY REQUIREMENTS

The contractor shall comply with the Army Corps of Engineers Safety and Health Requirements Manual, EM 385-1-1, current version located at http://www.usace.army.mil/SafetyandOccupationalHealth/SafetyandHealthRequirementsManual.aspx, in addition to all applicable Federal, State, and Local safety codes and practices. It is the contractor's responsibility to ensure staff and public safety during the entire duration of the contract. Necessary signs, barriers, warning devices, etc. shall be operated and maintained by the contractor at contractor expense. Contractor employees shall comply with the minimum dress requirements as stated in Chapter 5 of EM 385-1-1.

1.6 EQUIPMENT

All equipment used to perform work under this contract shall be in good operating and mechanical condition and shall comply with EM 385-1-1. All equipment shall be inspected by the contractor and the inspection reports shall be submitted to the COR prior to utilization of such equipment to accomplish work on this contract.

1.7 WEATHER LIMITATIONS

None as work will be completed within the Marion Reservoir Structure.

1.8 SUBMITTALS

The contractor shall furnish submittals. The submittals are progress reports, certifications of materials, safety plans, drawings, training certifications, and any work plans. These will be specifically listed and shall be furnished to the COR. Submittals requiring Government approval shall be formally prepared and approval granted prior to proceeding with work involving these submittals. FIO (For Information Only) submittals do not require Government approval.

1.9 PREWORK CONFERENCE

A pre-work conference will be held with the Contracting Officer or duly appointed representative and contractor prior to the commencement of any work at a location identified by the Contracting Officer or designated representative. The contractor's site manager and necessary personnel will be required to attend this meeting.

Procedures for proper invoicing and payment, schedule will be covered at this time.

1.10 ENVIRONMENTAL CLEANUP

The contractor shall maintain a clean work area at all times. The contractor shall be responsible for the protection and preservation of the environment and will be required to restore all damages/disturbances subject to the approval of the Contracting Officer. The contractor shall remove and dispose of all debris or surplus materials off Government property in a state approved disposal site unless specified otherwise. The contractor will be required to comply with all Federal and State environmental requirements.

1.11 COORDINATION OF WORK

The contractor shall coordinate all work with the COR. The Contractor shall be required to complete the work while minimizing impacts to the operations and uses of the Marion Flood Control structure. Closures of areas determined necessary for safety, will be coordinated through the COR/POC at least 48 hour in advance of closure. The Government point of contact (POC) for this work will be provided at contract award.

1.12 ANTITERRORISM AND OPERATIONS SECURITY REQUIREMENTS

The Contractor shall be responsible for ensuring all personnel, to include sub-contractor personnel, comply with the training requirements and procedures identified on the document titled “Antiterrorism/Operations Security Requirements” in Section H, Special Contract Requirements. When items for which training is identified, the Contractor shall ensure that all personnel complete acknowledgement for the specified training; the Contractor is responsible for ensuring all training acknowledgments, when applicable, are submitted to the Contracting Officer and Assistant Lake Manager within 10 calendar days of contract award. In no event shall any contractor or sub-contractor personnel be onsite prior to completion of any applicable training and submission of training verification.

Training materials and verification forms will be provided by the Contracting Officer within two business days of contract award. Pre‐screen candidates using E‐Verify Program. The Contractor must pre‐screen candidates using the E‐verify Program (http://www.dhs.gov/E‐Verify) website to meet the established employment eligibility requirements. The contractor must ensure that the Candidate has two valid forms of Government issued identification prior to ensure the correct information is entered into the E‐verify system. An initial list of verified/eligible Candidates must be provided to the Contracting Officer and the Assistant Lake Manager no later than 3 business days after the initial contract award.

1.13 CONTRACTOR PERSONNEL

Personnel hired by the contractor shall be fully qualified to perform the work in a professional manner and within industry established standards.

1.13.1 The Contracting Officer may require, in writing, the contractor remove from the worksite any employee the Contracting Officer deems incompetent, careless, or otherwise objectionable.

PART 2 – PRODUCTS

2.1 MATERIALS

There are no Government furnished materials. The contractor shall furnish all materials and supplies required to complete this task including, but not limited to, the following;

2.1.1 Industry appropriate machinery, chemicals and/or materials.

2.2 DELIVERY AND STORAGE

Any materials required for the completion of this contract shall be delivered by the Contractor to the site in new and undamaged condition and stored, if necessary, at locations identified by the COR/Assistant Lake Manager.

Materials that are damaged during the delivery or improper storage shall be replaced by the Contractor at no cost to the government. Contractor must report all defects of materials, including those deemed to have originated at the manufacturer to the Contracting Officer and Assistant Lake Manager immediately.

2.3 GOVERNMENT FURNISHED PROPERTY

The Government will allow access to the facility and provide general operation instructions and security procedures in the area work.

PART 3 – EXECUTION

3.1 BASE AND OPTION TASKS

Base tasks consist of eight (8) monolith drains, two (2) collection channels, and one (1) collection sump. There are forty-four (44) options for the cleaning and descaling of foundation drains located in the same area. Options, if awarded, will be included in contract award.

3.2 PERIOD OF PERFORMANCE

Base and options, if awarded, shall be completed 90 calendar days after contract award and within 30 days after start of work.

3.3 ACCOMPLISHMENT OF WORK

The contractor shall perform all necessary preparations and work to provide for the proper removal of mineral and/or matter build-up or obstructions within the internal drain system of the Marion Structure which includes all monolith drains, collection drains, sump pit, and, if options are awarded, the foundation drains as identified. Actions used in the removal if the identified material cannot impact or damage parent material whether it is concrete, steel piping, etc. Any damage to parent material or infrastructure will be repaired by the contractor at no cost to the government.

PART A – Site Preparation The Contractor shall perform all preparations necessary to complete the de-scaling project within the established timeframes.

PART B – Operations De-scaling: The contractor will remove all mineral, matter build-up or flow obstructions throughout the entire length of the drainage systems in a manner that does not impede the normal operations of these systems. All mineral or matter removed through the de-scaling operation will be collected and removed from the Marion Structure and deposited in a manner that does not violate any federal, state, county or local regulations. Additionally, all items utilized for the removal of identified mineral or matter will be properly sterilized to ensure that the transport of Zebra Mussels, which exist in Marion Reservoir, does not occur when those components are removed from the area.

Completion of de-scaling actions will result in a flow control system that is fully functional within the structure.

Other surplus materials, trash, packing or any item identified by the Assistant Lake Manager as surplus will be removed from government property and disposed of in accordance with all Federal and State environmental requirements.

3.4 WARRANTY

Contractor will guarantee that all completed work will be free of any defects and poor workmanship for a period of 2 year. All defects and poor workmanship found will be corrected with no extra charge to the government.

Section E - Inspection and Acceptance

CLAUSES INCORPORATED BY REFERENCE

52.246-1 Contractor Inspection Requirements APR 1984

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

52.242-15 Stop-Work Order AUG 1989

Section G - Contract Administration Data

252.204-7006 Billing Instructions OCT 2005

CLAUSES INCORPORATED BY FULL TEXT

252.201-7000 CONTRACTING OFFICER'S REPRESENTATIVE (DEC 1991)

(a) "Definition. Contracting officer's representative" means an individual designated in accordance with subsection 201.602-2 of the Defense Federal Acquisition Regulation Supplement and authorized in writing by the contracting officer to perform specific technical or administrative functions.

(b) If the Contracting Officer designates a contracting officer's representative (COR), the Contractor will receive a copy of the written designation. It will specify the extent of the COR's authority to act on behalf of the contracting officer. The COR is not authorized to make any commitments or changes that will affect price, quality, quantity, delivery, or any other term or condition of the contract.

(End of clause)

Section H - Special Contract Requirements

WAGE RATES

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5753 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 06/03/2020 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: Kansas Area: Kansas Counties of Ellsworth Jewell Lincoln Marion McPherson Mitchell Reno Rice

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 13.45 01012 - Accounting Clerk II 15.89 01013 - Accounting Clerk III 17.75 01020 - Administrative Assistant 20.89 01035 - Court Reporter 27.49 01041 - Customer Service Representative I 11.73 01042 - Customer Service Representative II 13.18 01043 - Customer Service Representative III 14.39 01051 - Data Entry Operator I 13.80 01052 - Data Entry Operator II 15.07 01060 - Dispatcher Motor Vehicle 17.43 01070 - Document Preparation Clerk 14.47 01090 - Duplicating Machine Operator 14.47 01111 - General Clerk I 13.02 01112 - General Clerk II 14.21 01113 - General Clerk III 15.95 01120 - Housing Referral Assistant 18.91 01141 - Messenger Courier 12.89 01191 - Order Clerk I 14.68 01192 - Order Clerk II 16.02 01261 - Personnel Assistant (Employment) I 15.83 01262 - Personnel Assistant (Employment) II 17.70 01263 - Personnel Assistant (Employment) III 19.73 01270 - Production Control Clerk 22.29 01290 - Rental Clerk 15.98 01300 - Scheduler Maintenance 15.17 01311 - Secretary I 15.17 01312 - Secretary II 16.97 01313 - Secretary III 18.91 01320 - Service Order Dispatcher 15.58 01410 - Supply Technician 20.89 01420 - Survey Worker 14.71 01460 - Switchboard Operator/Receptionist 12.71 01531 - Travel Clerk I 13.06 01532 - Travel Clerk II 13.76 01533 - Travel Clerk III 14.82 01611 - Word Processor I 13.53

01612 - Word Processor II 15.19 01613 - Word Processor III 16.99 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 20.95 05010 - Automotive Electrician 19.91 05040 - Automotive Glass Installer 19.06 05070 - Automotive Worker 19.06 05110 - Mobile Equipment Servicer 16.98 05130 - Motor Equipment Metal Mechanic 20.95 05160 - Motor Equipment Metal Worker 19.06 05190 - Motor Vehicle Mechanic 21.18 05220 - Motor Vehicle Mechanic Helper 15.92 05250 - Motor Vehicle Upholstery Worker 18.02 05280 - Motor Vehicle Wrecker 19.06 05310 - Painter Automotive 19.91 05340 - Radiator Repair Specialist 19.06 05370 - Tire Repairer 16.37 05400 - Transmission Repair Specialist 20.95 07000 - Food Preparation And Service Occupations 07010 - Baker 11.71 07041 - Cook I 11.23 07042 - Cook II 12.83 07070 - Dishwasher 8.95 07130 - Food Service Worker 10.31 07210 - Meat Cutter 13.67 07260 - Waiter/Waitress 9.02 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.62 09040 - Furniture Handler 13.76 09080 - Furniture Refinisher 19.62 09090 - Furniture Refinisher Helper 15.66 09110 - Furniture Repairer Minor 17.54 09130 - Upholsterer 19.62 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.11 11060 - Elevator Operator 11.92 11090 - Gardener 16.52 11122 - Housekeeping Aide 11.92 11150 - Janitor 11.92 11210 - Laborer Grounds Maintenance 12.91 11240 - Maid or Houseman 10.49 11260 - Pruner 11.72 11270 - Tractor Operator 15.31 11330 - Trail Maintenance Worker 12.91 11360 - Window Cleaner 13.13 12000 - Health Occupations 12010 - Ambulance Driver 16.19 12011 - Breath Alcohol Technician 17.80 12012 - Certified Occupational Therapist Assistant 28.64 12015 - Certified Physical Therapist Assistant 26.96 12020 - Dental Assistant 17.62 12025 - Dental Hygienist 34.53 12030 - EKG Technician 24.79 12035 - Electroneurodiagnostic Technologist 24.79 12040 - Emergency Medical Technician 16.19 12071 - Licensed Practical Nurse I 15.91 12072 - Licensed Practical Nurse II 17.80 12073 - Licensed Practical Nurse III 19.84 12100 - Medical Assistant 13.82 12130 - Medical Laboratory Technician 22.51 12160 - Medical Record Clerk 15.23 12190 - Medical Record Technician 17.03 12195 - Medical Transcriptionist 15.89 12210 - Nuclear Medicine Technologist 36.66 12221 - Nursing Assistant I 11.36 12222 - Nursing Assistant II 12.77 12223 - Nursing Assistant III 13.94 12224 - Nursing Assistant IV 15.65 12235 - Optical Dispenser 15.10 12236 - Optical Technician 15.91

12250 - Pharmacy Technician 15.80 12280 - Phlebotomist 13.37 12305 - Radiologic Technologist 24.62 12311 - Registered Nurse I 22.50 12312 - Registered Nurse II 27.53 12313 - Registered Nurse II Specialist 27.53 12314 - Registered Nurse III 33.30 12315 - Registered Nurse III Anesthetist 33.30 12316 - Registered Nurse IV 39.92 12317 - Scheduler (Drug and Alcohol Testing) 22.04 12320 - Substance Abuse Treatment Counselor 21.97 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 18.36 13012 - Exhibits Specialist II 22.75 13013 - Exhibits Specialist III 27.82 13041 - Illustrator I 18.36 13042 - Illustrator II 22.75 13043 - Illustrator III 27.82 13047 - Librarian 25.19 13050 - Library Aide/Clerk 12.63 13054 - Library Information Technology Systems 21.60 Administrator 13058 - Library Technician 15.98 13061 - Media Specialist I 16.41 13062 - Media Specialist II 18.36 13063 - Media Specialist III 20.47 13071 - Photographer I 16.41 13072 - Photographer II 18.36 13073 - Photographer III 22.75 13074 - Photographer IV 27.82 13075 - Photographer V 33.66 13090 - Technical Order Library Clerk 15.50 13110 - Video Teleconference Technician 16.41 14000 - Information Technology Occupations 14041 - Computer Operator I 17.92 14042 - Computer Operator II 18.33 14043 - Computer Operator III 21.46 14044 - Computer Operator IV 23.01 14045 - Computer Operator V 25.46 14071 - Computer Programmer I (see 1) 22.75 14072 - Computer Programmer II (see 1) 25.78 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 17.92 14160 - Personal Computer Support Technician 24.04 14170 - System Support Specialist 25.81 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.53 15020 - Aircrew Training Devices Instructor (Rated) 35.72 15030 - Air Crew Training Devices Instructor (Pilot) 42.82 15050 - Computer Based Training Specialist / Instructor 29.53 15060 - Educational Technologist 26.17 15070 - Flight Instructor (Pilot) 42.82 15080 - Graphic Artist 21.75 15085 - Maintenance Test Pilot Fixed Jet/Prop 42.82 15086 - Maintenance Test Pilot Rotary Wing 42.82 15088 - Non-Maintenance Test/Co-Pilot 42.82 15090 - Technical Instructor 18.76 15095 - Technical Instructor/Course Developer 22.94 15110 - Test Proctor 15.14 15120 - Tutor 15.14 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.75 16030 - Counter Attendant 9.75 16040 - Dry Cleaner 12.32 16070 - Finisher Flatwork Machine 9.75 16090 - Presser Hand 9.75

16110 - Presser Machine Drycleaning 9.75 16130 - Presser Machine Shirts 9.75 16160 - Presser Machine Wearing Apparel Laundry 9.75 16190 - Sewing Machine Operator 13.10 16220 - Tailor 13.88 16250 - Washer Machine 10.60 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 22.95 19040 - Tool And Die Maker 29.95 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.99 21030 - Material Coordinator 22.29 21040 - Material Expediter 22.29 21050 - Material Handling Laborer 15.06 21071 - Order Filler 12.00 21080 - Production Line Worker (Food Processing) 18.99 21110 - Shipping Packer 16.69 21130 - Shipping/Receiving Clerk 16.69 21140 - Store Worker I 14.77 21150 - Stock Clerk 19.10 21210 - Tools And Parts Attendant 18.99 21410 - Warehouse Specialist 18.99 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.78 23019 - Aircraft Logs and Records Technician 24.24 23021 - Aircraft Mechanic I 28.49 23022 - Aircraft Mechanic II 29.78 23023 - Aircraft Mechanic III 30.93 23040 - Aircraft Mechanic Helper 21.06 23050 - Aircraft Painter 27.22 23060 - Aircraft Servicer 24.24 23070 - Aircraft Survival Flight Equipment Technician 27.22 23080 - Aircraft Worker 25.77 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.77 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.49

II

23110 - Appliance Mechanic 21.79 23120 - Bicycle Repairer 17.95 23125 - Cable Splicer 35.41 23130 - Carpenter Maintenance 21.09 23140 - Carpet Layer 20.40 23160 - Electrician Maintenance 25.01 23181 - Electronics Technician Maintenance I 26.10 23182 - Electronics Technician Maintenance II 27.64 23183 - Electronics Technician Maintenance III 30.71 23260 - Fabric Worker 19.27 23290 - Fire Alarm System Mechanic 22.55 23310 - Fire Extinguisher Repairer 17.95 23311 - Fuel Distribution System Mechanic 27.29 23312 - Fuel Distribution System Operator 21.67 23370 - General Maintenance Worker 18.69 23380 - Ground Support Equipment Mechanic 28.49 23381 - Ground Support Equipment Servicer 24.24 23382 - Ground Support Equipment Worker 25.77 23391 - Gunsmith I 17.95 23392 - Gunsmith II 20.51 23393 - Gunsmith III 22.76 23410 - Heating Ventilation And Air-Conditioning 22.64 Mechanic 23411 - Heating Ventilation And Air Contidioning 23.68 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 21.77 23440 - Heavy Equipment Operator 20.58 23460 - Instrument Mechanic 22.76 23465 - Laboratory/Shelter Mechanic 21.71 23470 - Laborer 15.06 23510 - Locksmith 21.71 23530 - Machinery Maintenance Mechanic 22.58 23550 - Machinist Maintenance 20.58

23580 - Maintenance Trades Helper 15.77 23591 - Metrology Technician I 22.76 23592 - Metrology Technician II 23.81 23593 - Metrology Technician III 24.76 23640 - Millwright 22.55 23710 - Office Appliance Repairer 21.55 23760 - Painter Maintenance 18.96 23790 - Pipefitter Maintenance 22.34 23810 - Plumber Maintenance 21.25 23820 - Pneudraulic Systems Mechanic 22.76 23850 - Rigger 22.76 23870 - Scale Mechanic 20.51 23890 - Sheet-Metal Worker Maintenance 21.95 23910 - Small Engine Mechanic 20.40 23931 - Telecommunications Mechanic I 27.17 23932 - Telecommunications Mechanic II 28.41 23950 - Telephone Lineman 28.26 23960 - Welder Combination Maintenance 19.95 23965 - Well Driller 24.81 23970 - Woodcraft Worker 22.76 23980 - Woodworker 17.95 24000 - Personal Needs Occupations 24550 - Case Manager 16.02 24570 - Child Care Attendant 10.20 24580 - Child Care Center Clerk 12.75 24610 - Chore Aide 10.34 24620 - Family Readiness And Support Services 16.02 Coordinator 24630 - Homemaker 16.25 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 23.45 25040 - Sewage Plant Operator 23.96 25070 - Stationary Engineer 25.22 25190 - Ventilation Equipment Tender 17.14 25210 - Water Treatment Plant Operator 20.86 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.74 27007 - Baggage Inspector 14.15 27008 - Corrections Officer 16.89 27010 - Court Security Officer 17.24 27030 - Detection Dog Handler 17.18 27040 - Detention Officer 16.89 27070 - Firefighter 17.85 27101 - Guard I 14.15 27102 - Guard II 17.18 27131 - Police Officer I 19.19 27132 - Police Officer II 21.32 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 11.83 28042 - Carnival Equipment Repairer 12.77 28043 - Carnival Worker 9.29 28210 - Gate Attendant/Gate Tender 14.32 28310 - Lifeguard 10.82 28350 - Park Attendant (Aide) 16.01 28510 - Recreation Aide/Health Facility Attendant 11.69 28515 - Recreation Specialist 19.85 28630 - Sports Official 12.76 28690 - Swimming Pool Operator 15.81 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 24.15 29020 - Hatch Tender 24.15 29030 - Line Handler 24.15 29041 - Stevedore I 22.73 29042 - Stevedore II 25.29 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.29 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.78 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.60 30021 - Archeological Technician I 17.30 30022 - Archeological Technician II 18.90

30023 - Archeological Technician III 23.42 30030 - Cartographic Technician 23.42 30040 - Civil Engineering Technician 19.93 30051 - Cryogenic Technician I 25.94 30052 - Cryogenic Technician II 28.64 30061 - Drafter/CAD Operator I 16.90 30062 - Drafter/CAD Operator II 18.90 30063 - Drafter/CAD Operator III 21.07 30064 - Drafter/CAD Operator IV 25.94 30081 - Engineering Technician I 16.25 30082 - Engineering Technician II 18.25 30083 - Engineering Technician III 22.54 30084 - Engineering Technician IV 24.66 30085 - Engineering Technician V 33.08 30086 - Engineering Technician VI 40.00 30090 - Environmental Technician 24.67 30095 - Evidence Control Specialist 23.42 30210 - Laboratory Technician 22.57 30221 - Latent Fingerprint Technician I 25.94 30222 - Latent Fingerprint Technician II 28.64 30240 - Mathematical Technician 23.48 30361 - Paralegal/Legal Assistant I 18.63 30362 - Paralegal/Legal Assistant II 23.48 30363 - Paralegal/Legal Assistant III 28.72 30364 - Paralegal/Legal Assistant IV 34.16 30375 - Petroleum Supply Specialist 28.64 30390 - Photo-Optics Technician 23.48 30395 - Radiation Control Technician 28.64 30461 - Technical Writer I 21.97 30462 - Technical Writer II 26.88 30463 - Technical Writer III 32.52 30491 - Unexploded Ordnance (UXO) Technician I 25.61 30492 - Unexploded Ordnance (UXO) Technician II 30.98 30493 - Unexploded Ordnance (UXO) Technician III 37.14 30494 - Unexploded (UXO) Safety Escort 25.61 30495 - Unexploded (UXO) Sweep Personnel 25.61 30501 - Weather Forecaster I 25.94 30502 - Weather Forecaster II 31.54 30620 - Weather Observer Combined Upper Air Or (see 2) 21.07 Surface Programs 30621 - Weather Observer Senior (see 2) 23.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 30.98 31020 - Bus Aide 10.85 31030 - Bus Driver 13.88 31043 - Driver Courier 13.30 31260 - Parking and Lot Attendant 12.04 31290 - Shuttle Bus Driver 14.34 31310 - Taxi Driver 12.63 31361 - Truckdriver Light 14.34 31362 - Truckdriver Medium 15.40 31363 - Truckdriver Heavy 19.37 31364 - Truckdriver Tractor-Trailer 19.37 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.11 99030 - Cashier 9.73 99050 - Desk Clerk 9.57 99095 - Embalmer 30.15 99130 - Flight Follower 25.61 99251 - Laboratory Animal Caretaker I 13.77 99252 - Laboratory Animal Caretaker II 14.86 99260 - Marketing Analyst 24.49 99310 - Mortician 30.15 99410 - Pest Controller 20.55 99510 - Photofinishing Worker 15.51 99710 - Recycling Laborer 15.56 99711 - Recycling Specialist 18.44 99730 - Refuse Collector 14.12 99810 - Sales Clerk 11.90 99820 - School Crossing Guard 11.60

99830 - Survey Party Chief 22.40 99831 - Surveying Aide 13.82 99832 - Surveying Technician 18.95 99840 - Vending Machine Attendant 17.71 99841 - Vending Machine Repairer 21.04 99842 - Vending Machine Repairer Helper 17.71

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.54 per hour up to 40 hours per week or $181.60 per week or $786.93 per month

HEALTH & WELFARE EO 13706: $4.22 per hour up to 40 hours per week or $168.80 per week or $731.47 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 10 years and 4 after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr's Birthday Washington's Birthday Good Friday Memorial Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.)

(See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree…