SOLICITATION SPMYM2-22-Q-0366.pdf

SEE ADDENDUM

(No Collect Calls)

SPMYM222Q0366 23-Nov-2021

b. TELEPHONE NUMBER

360-476-0920

8. OFFER DUE DATE/LOCAL TIME

08:00 AM 29 Dec 2021

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA X ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

SPMYM29. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

KIM A. VO

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

1 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.X

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N4523AFY22IDIQFMEDISC

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DLA MARITIME PUGET SOUND

ATTN: KIM VO

467 W STREET

BREMERTON WA 98314

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE N4523A 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

PUGET SOUND NAVAL SHIPYARD

RECEIVING OFFICER PSNS

BLDG 514

1400 FARRAGUT AVE

N4523A

BREMERTON WA 98314-5001

TEL: 360-476-7640 FAX:

360-476-4121FAX:

TEL: 360-476-0920 SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

339999

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF105

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

SPMYM222Q0366

Section SF 1449 - CONTINUATION SHEET

VENDOR INFORMATION

1. The Contractor’s POC is Phone:

Fax:

E-mail:

2. Buyer POC is KIM VO

E-mail: KIM.VO@DLA.MIL

3. Invoice Information:

The contractor shall utilize the electronic invoicing upon delivery of supplies indicated herein. Invoice may be submitted not more than one every two weeks. Invoices must be submitted electronically using Wide Area Work Flow (WAWF) – Receipt and Acceptance. The contractor shall self-register at the web site: https://wawf.eb.mil.

Contractor training is available on the Internet at https://wawftraining.eb.mil.

Additional support can be accessed by calling the NAVY WAWF Assistance Line: 1-877-251-9293.

See clause 252.232-7006 for WAWF table.

4. Inspection Level:

QA 3 45 days inspection

IF THIS IS AN INSPECTION LEVEL OTHER THAN 4 THE FOLLOWING APPLIES:

If upon inspection material is found to be non-compliant, vendor will reship corrected material or credit the credit card charged.

5. Defense Biometric Identification System (DBIDS):

Effective 14 August 2017, NCACS credentials will no longer be accepted for base access. Any new contractor, vendor or supplier requesting base access will be required to obtain a Defense Biometric Identification System (DBIDS) credential. NCACS credentials will no longer be issued. Only DBIDS credentials will be issued to ALL contractors, vendors and suppliers seeking base access AFTER 30 June 2017. Defense Biometric Identification System (DBIDS) increases installation security and communications by receiving frequent database updates on changes to personnel/credential status, law enforcement warrants, lost/stolen cards, and force protection conditions.

The system provides continuous vetting anytime the DBIDS card is scanned at an installation entry point.

If you currently have a Navy Commercial Access Control System (NCACS) card, the following is required to get a DBIDS credential:

Present your NCACS Card and a completed copy of the SECNAV FORM 5512/1 to the base Visitor Control Center (VCC) representative.

The VCC will pull up your information in the computer, ensuring all information is current and correct.

Once your information is validated, a temporary DBIDS credential is provided.

Your temporary credential will have an expiration date, prior to which you will need to obtain your permanent DBIDS credential (~ 180 days).

For each additional U.S. Navy installation to which you need access, the first time you visit you only need to bring your DBIDS credential and statement of purpose for base access when arriving at the Visitor Control Center.

The representative will enter base access authorization and then you may proceed to work.

If you do NOT have an NCACS Card, the following is required to obtain a DBIDS credential:

Present a letter or official document from any government sponsoring organization that provides the purpose for your access.

Present valid identification, such as a passport or Real ID Act-compliant state driver's license.

Present a completed copy of the SECNAV 5512/1 form to obtain your background check.

Upon completion of the background check, the Visitor Control Center representative will complete the

DBIDS enrollment process, which includes your photo, finger prints, base restrictions, and several other assessments; after all this is done, you will be provided with your new DBIDS credential.

All deliveries must pass through the base Truck Inspection Station. All delivery vehicles are subject to inspection.

Drivers should expect delays due to heightened security.

For access to the main, perimeter gates at any Navy Base Kitsap installation, contractors are required to be a US Citizen and have either:

(a) DBIDS badge or

(b) Request a One-day Visitor badge at Pass & ID. Be prepared to present:

-Photo ID -Original proof of citizenship (any one of the following is acceptable):

State Certified Birth Certificate (must have the raised seal) Unexpired U.S. passport/Passport Card Alien Registration Card

Enhanced state-issued driver's license only accepted from Michigan, Minnesota, New York, Vermont, and Washington. Real ID licenses are not accepted at this time.

Naturalization papers Certificate/Statement of Birth Born Abroad)

-Current vehicle registration and insurance -Bill of lading that has the delivery address on it

Please note: The DBIDS badge does not give access through the second, Operational Area (OA) gate to lower base Bangor or to the Controlled Industrial Area (CIA) at Puget Sound Naval Shipyard (PSNS). To gain access to either the OA Gate or CIA area, a Navy Region Bangor or NAVSEA Badge is required.

To request a NAVY REGION NW badge, https://www.bavr.cnic.navy.mil/. Sponsor email is trina.williamson@navy.mil

To request a NAVSEA badge, call PSNS Pass & ID 360-476-4882.

FOR MORE INFORMATION VISIT: https://www.cnic.navy.mil/om/dbids.html

PAYMENT REQUEST FORM: GOVERNMENT PURCHASE CARD

Please follow the steps below to receive payment via Government-Wide Purchase Card.

1. After product shipment or service is rendered, complete the form below and email or fax to Accounts Payable (A/P). PSNS & IMF Cardholder contact information is below:

c600.creditcard.fct@navy.mil Fax: (360) 476-8553

2. An itemized and serialized invoice with the Government Purchase Order number and Delivery Order number (if applicable) clearly indicated on all pages. This is required to be included with this payment request form.

3. FOB Origin, Prepaid, Prepay & Add sales require evidence of freight paid. Submit copy of freight bill with payment request form. Packaging and handling charges will not be reimbursed.

4. Upon receipt of all required documentation, a Government purchase card holder will contact the contractor’s designated person of contact with purchase card information.

5. Code 600 Method of Payment policies does not allow the use of third party card processing companies such as Paypal, Paypro, etc.

6. If a Government card number is necessary for order processing purposes, the vendor can EMAIL or FAX this form and a proforma invoice to A/P to request a cardholder’s number. A/P will provide the card information via phone call.

Specify “Order Processing Purposes Request” on the top of the form.

AT NO TIME CAN AN ORDER PROCESSING CARD NUMBER BE CHARGED WITHOUT THE

CARDHOLDER’S FINAL AUTHORIZATION.

Failure to receive authorization will result in an immediate request for credit and/or dispute of the transaction.

Contract #/Delivery Order #: _________________________________________ Date: ____________________ Contractor Name:_______________________________________________ Address:______________________________________________________ Point of Contact and Title:_________________________________________ Phone and fax number:_________________________________ E-Mail:___________________________ Shipment or service date:__________________________________________ Total amount of sale:______________________________________________ ----------------------------------------GPC AUTHORIZATION----------------------------------- (for Government use only) Date:____________________________ Amount Authorized:____________________________ Name/Phone Number:______________________________________________ Invoice Number:_________________________________________ Initials:________ Comments: ___________________________________________________

ATTACHMENT 1

ATTACHMENT 1 - ONE PAGE OF CONTRACT DATA REQUIREMENTS LIST REQUIRED FOR ALL

CLINS.

ITEM NO SUPPLIES/SERVICES MAX

QUANTITY

UNIT UNIT PRICE MAX AMOUNT

0001 923 Each

FME DISC

FFP

BASE YEAR:

FME DISC, PLASTIC, BLANK

6" OD X 1/4" THICK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

6" OD X 1/4" THICK:

FME DISC, BLANK, PLASTIC 6" OD X 1/4" THK, COLOR-BLACK

CHEMICAL COMPOUND RESTRICTIONS FOR FME DISC, PLASTIC

BLANKS

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEA

D. CONTAIN NO MOE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. COC STATING MATERIAL MEETS ASTM-D-4801 AND ASTM-D-1248

TY-III, GR W8/W9, CL-C IS REQUIRED FROM MANUFACTURE WITH

SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED

**BRAND NAME OR EQUAL TO: P/N: DISC 6" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

FOB: Destination

NSN: 5340-LL-S05-4152

PURCHASE REQUEST NUMBER: N4523AFY22IDIQFMEDISC

PSC CD: 5340

MAX

NET AMT

UNIT UNIT PRICE MAX AMOUNT

0002 1,596 Each

FME DISC

FFP

BASE YEAR

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

NSN: 5340-LL-S05-4157

UNIT UNIT PRICE MAX AMOUNT

0003 891 Each

FME DISC

FFP

BASE YEAR

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

4 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 4-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

NSN: 5340-LL-S05-4160

UNIT UNIT PRICE MAX AMOUNT

0004 1,023 Each

FME DISC

FFP

BASE YEAR

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

NSN: 5340-LL-S05-4161

UNIT UNIT PRICE MAX AMOUNT

0005 951 Each

FME DISC

FFP

BASE YEAR

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

2-1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 2-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

NSN: 5340-LL-S05-4165

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

CONTRACT DATA REQUIREMENTS LIST

FFP

SEE SUBCLIN 0006AA FOR THE DETAILED CONTRACT DATA

REQUIREMENTS LIST FOR ALL CLINS.

UNIT UNIT PRICE MAX AMOUNT

0006AA 1 Each

CONTRACT DATA REQUIREMENTS LIST

FFP

SEE EXHIBIT A: CERTIFICATION OF COMPLIANCE PER DI-MISC-

81356A FOR ALL CLINS OF THE BASE YEAR, 1ST YEAR, 2ND YEAR,

3RD YEAR AND THE 4TH YEAR

CERTIFICATION SHALL BE FORWARDED IN ACCORDANCE WITH

EXHIBIT A - ATTACHMENT 1

FOB: Destination

UNIT UNIT PRICE MAX AMOUNT

1001 969 Each

OPTION FME DISC

FFP

1ST YEAR:

FME DISC, PLASTIC, BLANK

6" OD X 1/4" THICK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

6" OD X 1/4" THICK:

FME DISC, BLANK, PLASTIC 6" OD X 1/4" THK, COLOR-BLACK

CHEMICAL COMPOUND RESTRICTIONS FOR FME DISC, PLASTIC

BLANKS

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEA

D. CONTAIN NO MOE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. COC STATING MATERIAL MEETS ASTM-D-4801 AND ASTM-D-1248

TY-III, GR W8/W9, CL-C IS REQUIRED FROM MANUFACTURE WITH

SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED

**BRAND NAME OR EQUAL TO: P/N: DISC 6" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

UNIT UNIT PRICE MAX AMOUNT

1002 1,676 Each

OPTION FME DISC

FFP

1ST YEAR

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

3-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE

UNIT UNIT PRICE MAX AMOUNT

1003 936 Each

OPTION FME DISC

FFP

1ST YEAR

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

4 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

4-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 4-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

UNIT UNIT PRICE MAX AMOUNT

1004 1,074 Each

OPTION FME DISC

FFP

1ST YEAR

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

UNIT UNIT PRICE MAX AMOUNT

1005 999 Each

OPTION FME DISC

FFP

1ST YEAR

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

2-1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 2-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

FOB: Destination

NSN: 5340-LL-S05-4165

UNIT UNIT PRICE MAX AMOUNT

2001 1,018 Each

OPTION FME DISC

FFP

2ND YEAR:

FME DISC, PLASTIC, BLANK

6" OD X 1/4" THICK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

6" OD X 1/4" THICK:

FME DISC, BLANK, PLASTIC 6" OD X 1/4" THK, COLOR-BLACK

CHEMICAL COMPOUND RESTRICTIONS FOR FME DISC, PLASTIC

BLANKS

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEA

D. CONTAIN NO MOE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. COC STATING MATERIAL MEETS ASTM-D-4801 AND ASTM-D-1248

TY-III, GR W8/W9, CL-C IS REQUIRED FROM MANUFACTURE WITH

SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED

**BRAND NAME OR EQUAL TO: P/N: DISC 6" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

UNIT UNIT PRICE MAX AMOUNT

2002 1,760 Each

OPTION FME DISC

FFP

2ND YEAR

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

3-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

UNIT UNIT PRICE MAX AMOUNT

2003 982 Each

OPTION FME DISC

FFP

2ND YEAR

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

4 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

4-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 4-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

UNIT UNIT PRICE MAX AMOUNT

2004 1,128 Each

OPTION FME DISC

FFP

2ND YEAR

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

UNIT UNIT PRICE MAX AMOUNT

2005 1,048 Each

OPTION FME DISC

FFP

2ND YEAR

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

2-1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 2-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

FOB: Destination

NSN: 5340-LL-S05-4165

UNIT UNIT PRICE MAX AMOUNT

3001 1,068 Each

OPTION FME DISC

FFP

3RD YEAR

FME DISC, PLASTIC, BLANK

6" OD X 1/4" THICK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

6" OD X 1/4" THICK:

FME DISC, BLANK, PLASTIC 6" OD X 1/4" THK, COLOR-BLACK

CHEMICAL COMPOUND RESTRICTIONS FOR FME DISC, PLASTIC

BLANKS

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEA

D. CONTAIN NO MOE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. COC STATING MATERIAL MEETS ASTM-D-4801 AND ASTM-D-1248

TY-III, GR W8/W9, CL-C IS REQUIRED FROM MANUFACTURE WITH

SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED

**BRAND NAME OR EQUAL TO: P/N: DISC 6" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

UNIT UNIT PRICE MAX AMOUNT

3002 1,848 Each

OPTION FME DISC

FFP

3RD YEAR

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

3-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

UNIT UNIT PRICE MAX AMOUNT

3003 1,031 Each

OPTION FME DISC

FFP

3RD YEAR

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

4 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

4-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 4-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

UNIT UNIT PRICE MAX AMOUNT

3004 1,184 Each

OPTION FME DISC

FFP

3RD YEAR

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

3" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

UNIT UNIT PRICE MAX AMOUNT

3005 1,101 Each

OPTION FME DISC

FFP

3RD YEAR

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

2-1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK

2-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 2-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

CONSIDERED AS NON-RESPONSIVE.

FOB: Destination

NSN: 5340-LL-S05-4165

UNIT UNIT PRICE MAX AMOUNT

4001 1,122 Each

OPTION FME DISC

FFP

4TH YEAR

FME DISC, PLASTIC, BLANK

6" OD X 1/4" THICK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

6" OD X 1/4" THICK:

FME DISC, BLANK, PLASTIC 6" OD X 1/4" THK, COLOR-BLACK

CHEMICAL COMPOUND RESTRICTIONS FOR FME DISC, PLASTIC

BLANKS

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEA

D. CONTAIN NO MOE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. COC STATING MATERIAL MEETS ASTM-D-4801 AND ASTM-D-1248

TY-III, GR W8/W9, CL-C IS REQUIRED FROM MANUFACTURE WITH

SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED

**BRAND NAME OR EQUAL TO: P/N: DISC 6" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

UNIT UNIT PRICE MAX AMOUNT

4002 1,940 Each

OPTION FME DISC

FFP

4TH YEAR

FME DISC, PLASTIC, BLANK

3-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL.

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

3 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

3-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 3-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT THEIR BID WITH

SPECIFICATIONS FOR EVALUATION.

BIDS RECEIVED FOR EQUALS WITHOUT SPECIFICATIONS WILL BE

UNIT UNIT PRICE MAX AMOUNT

4003 1,083 Each

OPTION FME DISC

FFP

4TH YEAR

FME DISC, PLASTIC, BLANK

4-1/2" OD X 1/4" THK, COLOR BLACK, POLYETHYLENE SHEET IAW

ASTM-D4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C

** IN ACCORDANCE WITH THE CONTRACT DATA REQUIREMENTS

LIST DESCRIBED IN THE SUBCLIN 0006AA - SEE THE ATTACHMENT 1

FOR MORE DETAILS OF THE CDRL

** IN ACCORDANCE WITH THE BELOW DATA CALSAK P 1 8C487DISC

4 1/2" OD X 1/4" THK:

FME DISC, PLASTIC, BLANK:

4-1/2" OD X 1/4" THK, COLOR BLACK

CHEMICAL COMPOUND RESTRICTIONS

FOR FME DISC, PLASTIC BLANKS:

A. CONTAIN NO MORE THAN 250 PPM OF CHLORINE

B. CONTAIN NO MORE THAN 250 PPM OF TOTAL SULFER

C. CONTAIN NO MORE THAN 250 PPM OF LEAD

D. CONTAIN NO MORE THAN 10 PPM OF MERCURY

E. CONTAIN NO MORE THAN 250 PPM BROMINE

F. CONTAIN NO MORE THAN 250 PPM FLUORINE

SAMPLING PRIOR TO CONTRACT AWARD IF OTHER THAN

REQUESTED:

1. SAMPLING FOR INSPECTION & TESTING SHALL BE IAW ANSI/ASQ

Z1.4-2003. A SAMPLING PLAN THAT ACCEPTS ON ZERO DEFECTS IS

REQUIRED.

2. ANY DEFECTIVE ITEM DISCOVERED AFTER SHIPMENT MAY BE

CAUSE FOR REJECTION OF THE ENTIRE CONTRACT QUANTITY.

3. CERTIFICATE OF COMPLIANCE STATING MATERIAL MEETS ASTM-

D-4801 AND ASTM-D-1248 TY-III, GR W8/W9, CL-C IS REQUIRED FROM

MANUFACTURER WITH SHIPMENT.

MANUFACTURE MUST BE APPROVED OR SAMPLING PROVIDED IF

OTHER THAN REQUESTED.

** BRAND NAME OR EQUAL TO: P/N DISC 4-1/2" OD X 1/4" THK

MANUFACTURE: POLYMER INDUSTRIES

BIDDING ON:

Name of Manufacture: __________________________________ Country of Manufacture: __________________________________ Part Number __________________________________

NOTE: VENDORS QUOTING EQUALS MUST SUBMIT…