Solicitation SPMYM125Q0096.pdf

SEE A DDENDUM

(No Collect Call s)

SPMY M125Q0096 07-Jul-2025

b. TELEPHONE NUMBER 8. OFF ER DUE DAT E/LOCAL T IM E

12:00 PM 11 Jul 2025

5. SOLICIT ATION NUM BER 6. SOLICITAT ION ISSUE DAT E

A UTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STA NDARD FORM 1449 (REV . 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR P RINT)

(SIGNAT URE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Us e Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTA NCE IS DIFFERENT A ND PUT

BELOW IS CHECKED

TELEPHONE NO.

SPMY M19. ISSUED BY

18b. SUBMIT INVOICES TO A DDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORM AT ION CALL:

a. NAME

2. CONTRACT NO. 3. AWARD/EFF ECTIVE DATE 4. ORDER NUM BER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNA TURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISIT ION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

N421585071B099

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. Y OUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESSX

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

DLA MARITIME NORFOLK

LATOY A HAY WOOD,

CODE NMAB U1

757-278-5082

PORTSMOUTH VA 23709-5000

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS AX

13b. RATING

DO-C9

CODE15. DELIVER TO CODE N42158 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

NORF OLK NAVAL SHIPYARD

3M CODE 100TI.3

NNSY INNOVAT ION & TECHOLOGY INSERTION DIVISIO

650 PENNOCK ST REET BLDG 184 1ST FLOOR

PORTSM OUTH VA 23709

T EL: FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

NAICS:

332710

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUA NTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

WOM EN-OWNED SM ALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SM ALL BUSINESS P ROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

PAGE 2 OF67

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAY MENT

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC' D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDA RD FORM 1449 (REV. 2/2012) BA CK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCA L REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUA NTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

Section SF 1449 - CONTINUATION SHEET

CONTACT INFORMATION

CONTACT INFORMATION, PALLETIZATION AND SHIPPING INSTRUCTIONS

CONTACT INFORMATION

If your company encounters any problems with this purchase order/contract, please contact Latoya Haywood by email at latoya.haywood@dla.mil or by telephone at (757) 396-8009.

PALLET REQUIREMENT

Contractors (drivers) delivering material to the Norfolk Naval Shipyard must come with two forms of Identification, one being a driver license or picture ID card issued by a State. The other form required is a SSN card, birth certificate issued by a state, Native American document or US citizen card. Driver(s) will not be escorted unless they have to go into the CIA.

All items/boxes over 40 lbs under this solicitation and/or contract is required to be palletized. Delivery will not be accepted to any material that IS NOT palletized. The shipment will not be offloaded and will be returned.

Material sourced or otherwise procured from NUFLO, Inc. (Cage Code: 3BZG7) and/or Synergy Flow Systems (Cage Code: 4GP29) are prohibited to be offered, sold, exchanged, or delivered to Norfolk Naval Shipyard.

Contract Number MUST be noticeable on the outside of the package and on the packing documents. All shipments must have the Contact Number or the Lead JML number labeled on the outside of all boxes. If not labeled the Warehouse may at the time of delivery turn the material away at the company's cost for not being able to identify the material.

MARKING OF SHIPMENTS (COMMERCIALLY PACKAGED ITEMS)

(i) Marking shall be in accordance with ASTM-D-3951 (most current edition) and with the information set forth in paragraph (ii) below. Unless specified elsewhere in this contract/order, bar coding is not required.

(ii) All UNIT AND EXTERIOR CONTAINERS/PACKS ARE REQUIRED TO BE MARKED AS FOLLOWS:

1. Applicable National stock number (NSN), Federal stock number (FSN), Local Stock Number (LSN), or Part Number when neither NSN, FSN, LSN are available

2. Noun nomenclature cited on contract or order

3. Quantity and unit of issue

4. QA Designator:

5. Government Contract, or Purchase Order Number (incl. Delivery Order No.)

6. From:_______________________________________________

(Contractor's Name)

(Contractor’s Address)

7. To: (See delivery address on page 1 or in Section F)

(iii) Markings may be applied by any means which provide legibility.

(iv) Additional markings required as stated below:

SHIPPING LABEL INSTRUCTIONS

All shipments must have a label on the outside of each box, clearly providing the following information, in addition to packing slips inside the box:

Document Numbers: N421585071B099 Contract or Purchasing Number: TO BE GIVEN AT THE TIME OF AWARD Government Purchasing Agent’s Name and Phone Number (if known): Latoya Haywood, (757) 396-8009 Post Award Action/Contract Issues: Post Awards NNSY, PostAwardsNNSY@dla.mil

If a label cannot be generated, the info must be clearly marked on the outside of each container.

PREPARATION FOR DELIVERY (COMMERCIALLY PACKAGED ITEMS)

Preservation, packaging and packing shall be in accordance with ASTM Designation D-3951(Latest Revision), “Standard Practice for Commercial Packaging Address all questions or concerns regarding the labeling or shipping documents with the government purchasing agent before confirming acceptance of the order.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Each N421585071B099

FFP

PART NAME -MILL TOOL HOLDER KIT

PART NUMBER - 00337998

MANUFACTURER - KENNAMETAL

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N421585071B099

VENDOR PART NR: 00337998 - MSC INDUSTRIAL SUPPLY CO.

PURCHASE REQUEST NUMBER: N421585071B099

PROJECT: NN1

PSC CD: 3470

NET AMT

ORDERING DATA 5071B099

1.2 Objective / Scope. This scope of work covers the purchase of a customized mill tool holder kit as specified.

The vendor shall provide the following services:

1.) Shall provide a tool holder package meeting the quantity, brand and characteristics as specified in 1.3 2.) The vendor will be responsible for shipping the items to Norfolk Naval Shipyard, Building 184, First Floor, Advanced Manufacturing and Repair Section, Portsmouth, VA 23709.

1.3 Tool Specifications. All tool holders provided as part of the Kit listed below shall be manufactured by Kennametal and meet exactly the part number (unless superseded by a new number for the same design) design characteristics specified, and quantity.

Quantity Kennametal Catalog Number Kennametal Order Number Description

15 CV40HCTHT075275 5521075 CV40 HYDROFORCE Ø3/4 X 2.75

10 CV40HCTHT125400 5647194 CV40 HYDROFORCE Ø1-1/4 X 4.00

4 CV40HCSLT025669 3019257 CV40 HYDRAULIC CHUCK

SLIMLINE Ø1/4X6.69

4 CV40HCSLT038669 3019258 CV40 HYDRAULIC CHUCK

SLIMLINE Ø3/8X6.69

4 CV40HCSL062669 3019259 CV40 HYDRAULIC CHUCK

SLIMLINE Ø5/8X6.69

4 CV40HCSL075669 2508154 CV40 HYDRAULIC CHUCK

SLIMLINE Ø3/4X6.69

1 CV40ER16250 1901019 16ER COLLET CHUCK - CV40

2 CV40ER16600 6693880 CV40 ER16 COLLET CHUCK L1=6.00

2 CV40ER32275 1261619 CV40ER32275

2 CV40ER32600 1901045 32ER COLLET CHUCK - CV40

2 CV40BDL10162 6136937 CV40B DUO-LOCK DL10 L1=1.62

2 CV40BDL12162 6136938 CV40B DUO-LOCK DL12 L1=1.62

2 CV40BDL16200 6136939 CV40B DUO-LOCK DL16 L1=2.00

2 CV40BDL20200 6136940 CV40B DUO-LOCK DL20 L1=2.00

2 CV40BDL25225 6136941 CV40B DUO-LOCK DL25 L1=2.25

1 CV40ZEM012138 1026404 1/8 ENDMILL ADAPTER

1 CV40EM012450 1026405 1/8 ENDMILL ADAPTER

1 CV40ZEM018138 1026406 3/16 ENDMILL ADAPTER

1 CV40EM018450 1026407 3/16 ENDMILL ADAPTER

2 CV40ZEM025138 1026408 1/4 ENDMILL ADAPTER

2 CV40EM025450 1026409 1/4 ENDMILL ADAPTER

1 CV40ZEM031138 1026410 5/16 ENDMILL ADAPTER

1 CV40EM031450 1026411 5/16 ENDMILL ADAPTER

2 CV40ZEM038138 1026412 3/8 ENDMILL ADAPTER

2 CV40EM038650 1013351 3/8 ENDMILL ADAPTER

1 CV40ZEM044175 1013352 7/16 ENDMILL ADAPTER

1 CV40EM044450 1013353 7/16 ENDMILL ADAPTER

2 CV40ZEM050175 1026380 1/2 ENDMILL ADAPTER

2 CV40EM050662 1013375 1/2 ENDMILL ADAPTER

2 CV40ZEM062175 1026381 5/8 ENDMILL ADAPTER

2 CV40EM062575 1013376 5/8 ENDMILL ADAPTER

2 CV40ZEM075175 1026382 3/4 ENDMILL ADAPTER

2 CV40EM075575 1013377 3/4 ENDMILL ADAPTER

1 CV40ZEM088175 1013378 7/8 ENDMILL ADAPTER

1 CV40EM088600 1013424 7/8 ENDMILL ADAPTER

2 CV40ZEM100175 1026383 1 ENDMILL ADAPTER

1 CV40ZEM125200 1013426 1-1/4 ENDMILL ADAPTER

1 CV40EM125425 1025947 1 1/4 ENDMILL ADAPTER

1 CV40EM100600 1013425 1" ENDMILL ADAPTER

1 CV40EM150662 1013428 1-1/2 ENDMILL ADAPTER

1 CV40BTDSMC0750900 4136187 3/4 TUNABLE SMA X10.5 CV40

1 CV40BTDSMC1000900 4136188 1 TUNABLE SMA X10.5 CV40

2 CV40BSMC050138 3641489 1/2 SMA - PILOT COOLANT - CV40B/AD

2 CV40BSMC050350 3641490 1/2 SMA - PILOT COOLANT - CV40B/AD

3 CV40BSMC075138 3641492 3/4 SMA - PILOT COOLANT - CV40B/AD

3 CV40BSMC075600 3641515 3/4 SMA - PILOT COOLANT - CV40B/AD

3 CV40ZBSM2C100100 3641518 1 SMA - PILOT COOL - SMALL OD - CV40B

3 CV40BSM2C100400 3641522 1 SMA - PILOT COOL - SMALL OD - CV40B

3 CV40BSMC100600 3641523 1 SMA - PILOT COOLANT - CV40B/AD

1 CV40BSMC125212 3641525 1.1/4 SMA - PILOT COOLANT - CV40B/AD

1 CV40BSMC125400 3641526 1-1/4 SMA - PILOT COOLANT - CV40B/AD

1 CV40BSMC150241 3641527 1.1/2 SMA - PILOT COOLANT - CV40B/AD

1 CV40BSMC150400 3641528 1.1/2 SMA - PILOT COOLANT - CV40B/AD

1 CV40BST08M228 4073530 CV SCREW ON ADAPTER

1 CV40BST10M228 4073532 CV SCREW ON ADAPTER

1 CV40BST12M228 4073644 CV SCREW ON ADAPTER

1 CV40BST16M228 4073646 CV SCREW ON ADAPTER

1 CV40TCRC1297 1615978 FLK 115BM/CAT40 T/C TAP CHUCK

1 CV40TCRC2393 1615979 WFLK 225BM/CAT 40 T/C TAP CHUCK

1 CV40CSTRC1290 1615969 WF1 IKP M/CAT-40 RIGID INT COOLANT

1 CV40CSTRC2350 1615971 WF2 IKP M/CAT-40 RIGID INT COOLANT

4 CV40BKM50354 2992437 KM50 - CV40 FORM B X 90MM

2 SS038SLDL100225 6136800 SS SAFELOCK D=.375 DUOLOCK DL10

L1=2.25

2 SS050SLDL120250 6136868 SS SAFELOCK D=.500 DUOLOCK DL12

L1=2.50

2 SS062SLDL160275 6136874 SS SAFELOCK D=.625 DUOLOCK DL16

L1=2.75

2 SS075SLDL200300 6136880 SS SAFELOCK D=.750 DUOLOCK DL20

L1=3.00

2 SS100SLDL250350 6136884 SS SAFELOCK D=1.000 DUOLOCK DL25

L1=3.50

2 HS062DL16N1170350 6933531 SS HEAVY METAL DL16 D=.625 L1=3.50

2 HS075DL20N1390375 6933532 SS HEAVY METAL DL20 D=.750 L1=3.75

2 HS100DL25N1830450 6933533 SS HEAVY METAL DL25 D=1.00 L1=4.50

2 12HCSFC0500 5998754 HC SFL REDUCER 1-1/4" OD TO 1/2" ID

2 12HCSFC0625 5998755 HC SFL REDUCER 1-1/4" OD TO 5/8" ID

2 12HCSFC0750 5998756 HC SFL REDUCER 1-1/4" OD TO 3/4" ID

2 12HCSFC1000 7164643 HC SFL REDUCER 1-1/4" OD TO 1.0" ID

2 50HC0125 2248951 HC REDUCER 1/2" OD TO 1/8" ID

2 50HC0188 1606046 HC REDUCER 1/2" OD TO 3/16" ID

2 50HC0250 1606047 HC REDUCER 1/2" OD TO 1/4" ID

2 50HC0312 1606048 HC REDUCER 1/2" OD TO 5/16" ID

2 50HC0375 1606049 HC REDUCER 1/2" OD TO 3/8" ID

2 75HC0125 1937870 HC REDUCER 3/4" OD TO 1/8" ID

2 75HC0188 1093496 HC REDUCER 3/4" OD TO 3/16" ID

2 75HC0250 1093497 HC REDUCER 3/4" OD TO 1/4" ID

2 75HC0312 1093498 HC REDUCER 3/4" OD TO 5/16" ID

2 75HC0375 1093500 HC REDUCER 3/4" OD TO 3/8" ID

2 75HC0438 1093501 HC REDUCER 3/4" OD TO 7/16" ID

2 75HC0500 1093268 HC REDUCER 3/4" OD TO 1/2" ID

- QUALITY ASSURANCE: Inspection and acceptance of the Mill Tool Holder Kit, performed at destination shall consist of type and kind; condition; preservation; packaging.

- TRAINING: N/A

- OPERATOR / MAINTENANCE / REPAIR MANUALS: N/A

- LIFTING AND HANDLING: MATERIAL HANDLING –Norfolk Naval Shipyard will provide forklift and pallet jack assistance as needed.

2 75HC0562 1093269 HC REDUCER 3/4" OD TO 9/16" ID

2 75HC0625 1093270 HC REDUCER 3/4" OD TO 5/8" ID

2 12HC0500 1093527 HC REDUCER 1-1/4" OD TO 1/2" ID

2 12HC0562 1093528 HC REDUCER 1-1/4" OD TO 9/16" ID

2 12HC0625 1093529 HC REDUCER 1-1/4" OD TO 5/8" ID

2 12HC0688 1093530 HC REDUCER 1-1/4" OD TO 11/16" ID

2 12HC0750 1093533 HC REDUCER 1-1/4" OD TO 3/4" ID

2 12HC0812 2248952 HC REDUCER 1-1/4" OD TO 13/16" ID

2 12HC0875 1093535 HC REDUCER 1-1/4" OD TO 7/8" ID

2 12HC1000 1093536 HC REDUCER 1-1/4" OD TO 1.0" ID

1 T1SET 1023476 QC SOLID ADPTR SET 0 - 9/16

1 T2SET 1291408 QC SOLID ADPTR SET 5/16 - 7/8

1 CPFN0750 7034093 CNC CHIP FAN 0.750" WELDON SHANK

1 ASTMB 6303102 ASSEMBLY STATION TABLE

MOUNTING BASE

1 SK40ASA 6302930 CV40 ASSEMBLY STATION ADAPTER

0002 1 Each N421585071B101

FFP

PART NAME -VF-2 CARBIDE INSERTS

PART NUMBER - 44819266

MANUFACTURER - KENNAMETAL

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N421585071B101

VENDOR PART NR: 44819266 - MSC INDUSTRIAL SUPPLY CO.

PURCHASE REQUEST NUMBER: N421585071B099

ORDERING DATA 5071B101

1.2 Objective / Scope. This scope of work covers the purchase of a customized carbide insert kit as specified.

The vendor shall provide the following services:

1.) Shall provide a carbide insert package meeting the quantity, brand and characteristics as specified in 1.3 2.) The vendor will be responsible for shipping the items to Norfolk Naval Shipyard, Building 184, First Floor, Advanced Manufacturing and Repair Section, Portsmouth, VA 23709.

1.3 Tool Specifications. All carbide inserts provided as part of the Kit listed below shall be manufactured by Kennametal and meet exactly the part number (unless superseded by a new number for the same design) design characteristics specified, and quantity.

QTY Kennametal Catalog Number Kennametal Order Number

Description

10 H2TE5RA0125R038HAR010 7155690 ENDMILL H2TE 5FL 1/8x1/8x3/8x2 R.01

10 H2TE5RA0188R063HAR010 7155921 ENDMILL H2TE 5F 3/16x3/16x5/8x2 1/4 R.01

10 H2TE5RA0250S038HAR015 7155935 ENDMILL H2TE 5FL 1/4x1/4x3/8x2 R.015

10 H2TE5RA0313S075HAR015 7155938 ENDMILL H2TE 5FL 5/16x5/16x3/4x2.5 R.015

10 H2TE5RA0375S075HAR015 7155940 ENDMILL H2TE 5FL 3/8x3/8x3/4x2 1/2 R.015

10 H2TE5RA0375S075HAR030 7155953 ENDMILL H2TE 5FL 3/8x3/8x3/4x2 1/2 R.03

5 H2TE5RA0500S063HAR015 7155993 ENDMILL H2TE 5FL 1/2x1/2x5/8x2 1/2 R.015

5 H2TE5RA0500S063HAR030 7155999 ENDMILL H2TE 5FL 1/2x1/2x5/8x2 1/2 R.03

5 H2TE5RA0500R125HAR015 7155994 ENDMILL H2TE 5F 1/2x1/2x1 1/4x3.25 R.015

5 H2TE5RA0500R125HAR030 7156000 ENDMILL H2TE 5F 1/2x1/2x1 1/4x3 1/4 R.03

5 H2TE5RA0500L163HAR015 7155995 ENDMILL H2TE 5FL 1/2x1/2x1 5/8x4 R.015

5 H2TE5RA0500L163HAR030 7156011 ENDMILL H2TE 5FL 1/2x1/2x1 5/8x4 R.03

5 H2TE5RA0500X200HAR015 7155996 ENDMILL H2TE 5FL 1/2x1/2x2x4 R.015

5 H2TE5RA0500X200HAR030 7156012 ENDMILL H2TE 5FL 1/2x1/2x2x4 R.03

2 H2TE5RA0625R125HAR015 7155997 ENDMILL H2TE 5FL 5/8x5/8x1 1/4x3.5 R.015

2 H2TE5RA0625R125HAR030 7156013 ENDMILL H2TE 5F 5/8x5/8x1 1/4x3 1/2 R.03

2 H2TE5RA0625L250HAR030 7156014 ENDMILL H2TE 5FL 5/8x5/8x2 1/2x5 R.03

2 H2TE5RA0625L250HAR060 7155964 ENDMILL H2TE 5FL 5/8x5/8x2 1/2x5 R.06

2 H2TE5RA0750S150HAR015 7157066 ENDMILL H2TE 5FL 3/4x3/4x1 1/2x4 R.015

2 H2TE5RA0750S150HAR030 7156015 ENDMILL H2TE 5FL 3/4x3/4x1 1/2x4 R.03

2 H2TE5RA0750L275HAR015 7157068 ENDMILL H2TE 5FL 3/4x3/4x2 3/4x5 R.015

2 H2TE5RA0750L275HAR030 7156016 ENDMILL H2TE 5FL 3/4x3/4x2 3/4x5 R.03

2 H2TE5RA1000S175HAR015 7157069 ENDMILL H2TE 5FL 1x1x1 3/4x4 1/2 R.015

2 H2TE5RA1000S175HAR030 7156017 ENDMILL H2TE 5FL 1x1x1 3/4x4 1/2 R.03

2 H2TE5RA1000R325HAR030 7157031 ENDMILL H2TE 5FL 1x1x3 1/4x6 R.03

2 H2TE5RA1000R325HAR060 7157038 ENDMILL H2TE 5FL 1x1x3 1/4x6 R.06

5 HA4R8RA0500R100SLR015I 7102490 ENDMILL HA4R 8FL 1/2x1/2x1x3 R,015

5 HA4R8RA0500R100SLR030I 7102511 ENDMILL HA4R 8FL 1/2x1/2x1x3 R,03

2 HA4R8RA0625R125SLR030I 7102522 ENDMILL HA4R 8F 5/8x5/8x1 1/4x3 1/2 R,03

2 HA4R8RA0625R125SLR060I 7102523 ENDMILL HA4R 8F 5/8x5/8x1 1/4x3 1/2 R,06

2 HA4R8RA0750R163SLR030I 7102534 ENDMILL HA4R 8FL 3/4x3/4x1 5/8x4 R,03

2 HA4R8RA0750R163SLR060I 7102535 ENDMILL HA4R 8FL 3/4x3/4x1 5/8x4 R,06

2 HA4R8RA1000R200SLR030I 7102552 ENDMILL HA4R 8FL 1x1x2x5 R,03

2 HA4R8RA1000R200SLR060I 7102553 ENDMILL HA4R 8FL 1x1x2x5 R,06

5 KOR5RA0500L250SLR015I 6971847 ENDMIL KOR5 1/2x1/2x2 1/2x4 1/2 R,015 SL

5 KOR5RA0500L250SLR030I 6971848 ENDMILL KOR5 1/2x1/2x2 1/2x4 1/2 R,03 SL

5 KOR5RA0500L250SLR060I 6971849 ENDMILL KOR5 1/2x1/2x2 1/2x4 1/2 R,06 SL

2 KOR5RA0625L313SLR030I 6971871 ENDMILL KOR5 5/8x5/8x3 1/8x5 1/2 R,03 SL

2 KOR5RA0625L313SLR060I 6971872 ENDMILL KOR5 5/8x5/8x3 1/8x5 1/2 R,06 SL

2 KOR5RA0625L313SLR090I 6971873 ENDMILL KOR5 5/8x5/8x3 1/8x5 1/2 R,09 SL

2 KOR5RA0750L375SLR030I 6971875 ENDMILL KOR5 3/4x3/4x3 3/4x6 1/4 R,03 SL

2 KOR5RA0750L375SLR060I 6971876 ENDMILL KOR5 3/4x3/4x3 3/4x6 1/4 R,06 SL

2 KOR5RA0750L375SLR090I 6971877 ENDMILL KOR5 3/4x3/4x3 3/4x6 1/4 R,09 SL

2 KOR5RA0750L375SLR120I 6971878 ENDMILL KOR5 3/4x3/4x3 3/4x6 1/4 R,12 SL

2 KOR5RA1000L500SLR030I 6971880 END MILL KOR5 1x1x5x8 R,03 SL

2 KOR5RA1000L500SLR060I 6971881 END MILL KOR5 1x1x5x8 R,06 SL

2 KOR5RA1000L500SLR090I 6971882 END MILL KOR5 1x1x5x8 R,09 SL

100 HNPJ0905ANERLP 7060935 DODEKA MILLING INSERT

100 HNGJ0905ANERGP 7060940 DODEKA MILLING INSERT

100 HNPJ0905ANERLM 7064757 DODEKA MILLING INSERT

100 HNGJ0905ANERGM 7064753 DODEKA MILLING INSERT

100 XDET120508ERM41 7142778 7792VXD IC12 INSERT

100 XDPT120508ERM41 7142443 7792VXD IC12 INSERT

100 LNGQ120608ERHDKT4 7009748 KT4 Insert LNGQ-HD R=0,8 RH

100 LNGU15T604SRGE 5516074 MILL4 INSERT R0.4 MEDIUM GEOMETRY

20 DFPR040203MSI 7064645 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR050203MSI 7064646 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR060304MSI 7064647 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR080304MSI 7064648 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR100305MSI 7064649 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR120405MSI 7064650 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR140406MSI 7064661 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR170508MSI 7064662 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR200608MSI 7064663 DRILL FIX PRO INDEX. INBOARD INSERT

MS

20 DFPR040204MSO 7064691 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR050204MSO 7064693 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR060304MSO 7064694 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR070305MSO 7064695 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR090305MSO 7064696 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR110406MSO 7064697 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR140408MSO 7064698 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR150508MSO 7064699 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

20 DFPR180610MSO 7064700 DRILL FIX PRO INDEX. OUTBOARD

INSERT MS

5 KTFST06350GTPM 7001868 KTFS INSERT GTP 6,350MM .2500IN B

5 KTFST07938GTPM 7002024 KTFS INSERT GTP 7,938MM .3125IN E

5 KTFST09525GTPM 7002072 KTFS INSERT GTP 9,525MM .3750IN I

5 KTFST11100GTPM 7002520 KTFS INSERT GTP 11,100MM .4370IN L

5 KTFST11113GTPM 7002521 KTFS INSERT GTP 11,113MM .4375IN L

5 KTFST12000GTPM 7002531 KTFS INSERT GTP 12,000MM .4724IN N

5 KTFST12700GTPM 7002541 KTFS INSERT GTP 12,700MM .5000IN O

5 KTFST13500GTPM 7005305 KTFS INSERT GTP 13,500MM .5315IN Q

5 KTFST15875GTPM 7005331 KTFS INSERT GTP 15,875MM .6250IN T

5 KTFST17463GTPM 7004224 KTFS INSERT GTP 17,463MM .6875IN V

5 KTFST19050GTPM 7004242 KTFS INSERT GTP 19,050MM .7500IN X

5 KTFST20638GTPM 7002454 KTFS INSERT GTP 20,638MM .8125IN Y

5 KTFST22225GTPM 7002462 KTFS INSERT GTP 22,225MM .8750IN ZA

5 KTFST23813GTPM 7002468 KTFS INSERT GTP 23,813MM .9375IN ZB

5 KTFST25400GTPM 7002473 KTFS INSERT GTP 25,400MM 1.0000IN ZD

5 H2TE5SE0125R038HA 7155689 ENDMILL H2TE 5FL 1/8x1/8x3/8x2 SE

5 H2TE5SE0250R075HA 7155870 ENDMILL H2TE 5FL 1/4x1/4x3/4x2 1/2 SE

5 H2TE5SE0375L125HA 7155917 ENDMILL H2TE 5FL 3/8x3/8x1 1/4x3 SE

5 H2TE5SE0500R125HA 7155975 ENDMILL H2TE 5FL 1/2x1/2x1 1/4x3 1/4 SE

5 H2TE5SE0500X200HA 7155977 ENDMILL H2TE 5FL 1/2x1/2x2x4 SE

5 H2TE5SE0625L250HA 7157059 ENDMILL H2TE 5FL 5/8x5/8x2 1/2x5 SE

5 H2TE5SE0750R225HA 7155979 ENDMILL H2TE 5FL 3/4x3/4x2 1/4x5 SE

5 H2TE5SE1000R325HA 7157062 ENDMILL H2TE 5FL 1x1x3 1/4x6 SE

20 KDMB0625M0ERGC 6784068 KDMB BALLNOSE INSERT DIA 0 625 INCH

GC

50 RPHT1204M0E442X5 6194533 7713 SERIES IC12 442-GEOMETRY x5

INDEXES

5 2BN0125IL075A 5876729 GP SCEM BN 2FL 1/8x1/8x3/4x2 1/4

5 2BN0250IX150A 5876752 GP SCEM BN 2FL 1/4x1/4x1 1/2x6

5 2BN0375IX300A 5876759 GP SCEM BN 2FL 3/8x3/8x3x6

5 2BN0500IX300A 5876766 GP SCEM BN 2FL 1/2x1/2x3x6

5 2SE0125IX075A 6086389 END MILL GP SC 2FL 1/8x1/8x3/4x2 1/4

5 2SE0250IL112A 6086401 GP SCEM 2FL 1/4x1/4x1 1/8x3

5 2SE0375IL112A 6086411 GP SCEM 2FL 3/8x3/8x1 1/8x3

5 2SE0500IL200A 6086420 END MILL GP SC 2FL 1/2x1/2x2x4

- QUALITY ASSURANCE: Inspection and acceptance of the carbide insert package, performed at destination

- TRAINING: N/A

- OPERATOR / MAINTENANCE / REPAIR MANUALS: N/A

0003 1 Each N421585071B102

FFP

PART NAME - VF 2 SCHUNK KIT

PART NUMBER - 64391451

MANUFACTURER - SCHUNK

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MILSTRIP: N421585071B102

VENDOR PART NR: 64391451- MSC INDUSTRIAL SUPPLY CO.

PURCHASE REQUEST NUMBER: N421585071B099

ORDERING DATA 5071B102

1.2 Objective / Scope. This scope of work covers the purchase of a customized measurement and layout kit as specified.

The vendor shall provide the following services:

1.) Shall provide a tool holder package meeting the quantity, brand and characteristics as specified in 1.3 2.) The vendor will be responsible for shipping the items to Norfolk Naval Shipyard, Building 184, First Floor, Advanced Manufacturing and Repair Section, Portsmouth, VA 23709.

1.3 Tool Specifications. All measurement and layout instruments provided as part of the Kit listed below shall be manufactured by the Schunk and meet exactly the part number (unless superseded by a new number for the same design or no longer available) design characteristics specified, and quantity.

QTY Schunk Part # Description

1 1323575 NSL3 800 Standard Quick-change Pallet System Clamping Station 1x Clamping station NSL3 800 1x Sealing nipple

1x Pneumatic plug connection 1x Dust cover 2x Eye bolt

1x Operating manual

4 0471151 SPA 40 CNC Clamping Pins & Bushings; Design Type: Standard Solid Bolt;

Series: SPA 40; Compatible Screw Size: M10, M12

4 0471152 SPB 40 Positioning/Clamping Pin for M10 Screws - Stainless Steel, Series

SPB 40

8 0471153 SPC 40 Clamping Pin for M10 Screws - Stainless Steel, Series SPC 40

1 1327465 ASL 1-G1/8 1x Connecting strip ASL 1-G1/8 1x Coupling mechanic

1 1462073 KIT CONVERSION 25KB FEMALE TO 1/4 US MALE

2 1514246 KSC3 125-300 1x Clamping vise KSC3 125-300

2 1514249 KSC3 125-300-S 1x Clamping vise KSC3 125-300-S

2 0490724 KSM2 90-400 1x Clamping rail KSM2 90-400

2 1319696 NSE mini 90-25 1x Pallet module NSE mini 90-25, 6x Fastening screws 3x O- rings 6x Cover caps

2 0435610 SPA mini 20 1x Clamping pin SPA mini 20 1x Fastening screw M6

2 0435620 SPB mini 20 1x Clamping pin SPB mini 20 1x Fastening screw M6

SPMYM125Q0096

4 0435630 SPC mini 20 1x Clamping pin SPC mini 20 1x Fastening screw M6

1 1393250 MEF-F-A1-100 270x90 220V

1x Magnetic chuck MEF-F-A1-100 270x90

1 0420655 KEH PLUS 01 220V/50-

60HZ

Control unit with magnetic slide on backside Power supply cable without plug, length 5 meter Connection cable PLC easy, length 5 meter

1 0420680 VBK 1x4PIN - 1x4PIN

1CH - 5M

Connecting cable with all connectors, length 5 meter

1 0420665 HAND REMOTE

CONTROL KEH PLUS 01 WITH

POWER REGULATION - 5

METER

Hand remote control with cable, length 5 meter

- QUALITY ASSURANCE: Inspection and acceptance of the Kit, performed at destination

- TRAINING: N/A

- OPERATOR / MAINTENANCE / REPAIR MANUALS: N/A

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 4 wks. ADC 1 NORFOLK NAVAL SHIPYARD

3M CODE 100TI.3

NNSY INNOVATION & TECHOLOGY

INSERTION DIVISIO

650 PENNOCK STREET BLDG 184 1ST

FLOOR

PORTSMOUTH VA 23709

FOB: Destination

N42158

0002 4 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

0003 4 wks. ADC 1 (SAME AS PREVIOUS LOCATION)

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management NOV 2024 52.204-9 Personal Identity Verification of Contractor Personnel JAN 2011 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-17 Ownership or Control of Offeror AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020 52.204-19 Incorporation by Reference of Representations and

Certifications.

DEC 2014

52.211-14 Notice Of Priority Rating For National Defense, Emergency Preparedness, and Energy Program Use

APR 2008

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

SEP 2023

52.219-1 Alt I Small Business Program Representations (FEB 2024) Alternate I

FEB 2024

52.232-39 Unenforceability of Unauthorized Obligations JUN 2013 52.242-15 Stop-Work Order AUG 1989 52.243-1 Changes--Fixed Price AUG 1987 52.246-1 Contractor Inspection Requirements APR 1984 52.247-34 F.O.B. Destination JAN 1991 52.253-1 Computer Generated Forms JAN 1991 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.204-7004 Antiterrorism Awareness Training for Contractors JAN 2023 252.204-7012 (Dev) Safeguarding Covered Defense Information and Cyber

Incident Reporting (DEVIATION 2024-O0013 REVISION 1)

MAY 2024

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services -- Representation

MAY 2021

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.204-7024 Notice on the Use of the Supplier Performance Risk System MAR 2023 252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7000 Buy American--Balance Of Payments Program Certificate FEB 2024 252.225-7048 Export-Controlled Items JUN 2013 252.225-7060 Prohibition on Certain Procurements from the Xinjiang

Uyghur Autonomous Region

JUN 2023

252.231-7000 Supplemental Cost Principles DEC 1991

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.239-7017 Notice of Supply Chain Risk DEC 2022 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7003 Notification of Potential Safety Issues JAN 2023 252.247-7023 Transportation of Supplies by Sea OCT 2024

CLAUSES INCORPORATED BY FULL TEXT

52.211-15 DEFENSE PRIORITY AND ALLOCATION REQUIREMENTS (APR 2008)

This is a rated order certified for national defense, emergency preparedness, and energy program use, and the Contractor shall follow all the requirements of the Defense Priorities and Allocations System regulation (15 CFR 700).

(End of clause)

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

i. Technical capability of the item offered meets the Government requirement

ii. Price

iii. Delivery

iv. Supplier Performance Risk System (SPRS) and Federal Awardee Performance and

Integrity System (FAPPIS) will be reviewed to determine vendor responsibility The relative order of importance of the evaluation factors are in descending order of importance. Technical capability and price when combined are evaluated as being substantially more significant than all other factors combined.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2024) ALTERNATE I (FEB 2024)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business (SDVOSB) concern" means a small business concern--

(1)(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

"Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program" means an SDVOSB concern that--

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

"Service-disabled veteran-owned small business (SDVOSB) Program" means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13

CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1001", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the entity is owned--

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation.

"Successor" means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

"Veteran-owned small business concern" means a small business concern--

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C.

101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

"Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women.

"Women-owned small business concern" means a small business concern--

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

"Women-owned small business (WOSB) concern eligible under the WOSB Program" (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b) (1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications--Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ___

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that--

(i) It [ ___ ] is, [ ___ ] is not a small business concern; or

(ii) It [ ___ ] is, [ ___ ] is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ ]

(2) Veteran-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents as part of its offer that it [ ___ ] is, [ ___ ] is not a veteran-owned small business concern.

(3) SDVOSB concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents that it [ ___ ] is, [ ___ ] is not an SDVOSB concern.

(4) SDVOSB concern joint venture eligible under the SDVOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [Complete only if the offeror represented itself as an SDVOSB concern in paragraph (c)(3) of this provision.] [The offeror shall enter the name and unique entity identifier of each party to the joint venture:

(5) Small disadvantaged business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) Women-owned small business concern. (Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it [ ___ ] is, [ ___ ] is not a women-owned small business concern.

(7) WOSB joint venture eligible under the WOSB Program. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

(8) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it [ ___ ] is, [ ___ ] is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c).

[The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .]

Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) Women-owned business concern (other than small business concern). (Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.) The offeror represents that it ( ___ ) is, a women-owned business concern.

(10) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: _________

(11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that--

(i) It [ ___ ] is, [ ___ ] is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It [ ___ ] is, [ ___ ] is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ___ .] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(12) (Complete if the offeror has represented itself as disadvantaged in paragraph (c)(5) of this provision.)

___ Black American.

___ Hispanic American.

___ Native American (American Indians, Eskimos, Aleuts, or Native Hawaiians).

___ Asian-Pacific American (persons with origins from Burma, Thailand, Malaysia, Indonesia, Singapore, Brunei, Japan, China, Taiwan, Laos, Cambodia (Kampuchea), Vietnam, Korea, The Philippines, Republic of Palau, Republic of the Marshall Islands, Federated States of Micronesia, the Commonwealth of the Northern Mariana Islands, Guam, Samoa, Macao, Hong Kong, Fiji, Tonga, Kiribati, Tuvalu, or Nauru).

___ Subcontinent Asian (Asian-Indian) American (persons with origins from India, Pakistan, Bangladesh, Sri Lanka, Bhutan, the Maldives Islands, or Nepal).

___ Individual/concern, other than one of the preceding.

(d) Certifications and representations required to implement provisions of Executive Order 11246--

(1) Previous Contracts and Compliance. The offeror represents that--

(i) It ( ___ ) has, ( ___ ) has not, participated in a previous contract or subcontract subject to the Equal Opportunity clause of this solicitation, and

(ii) It ( ___ ) has, ( ___ ) has not, filed all required compliance reports.

(2) Affirmative Action Compliance. The offeror represents that--

(i) It ( ___ ) has developed and has on file, ( ___ ) has not developed and does not have on file, at each establishment, affirmative action programs required by rules and regulations of the Secretary of Labor (41 CFR Subparts 60-1 and 60-2), or

(ii) It ( ___ ) has not previously had contracts subject to the written affirmative action programs requirement of the rules and regulations of the Secretary of Labor.

(e) Certification Regarding Payments to Influence Federal Transactions (31 U.S.C. 1352). (Applies only if the contract is expected to exceed $150,000.) By submission of its offer, the offeror certifies to the best of its knowledge and belief that no Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of Congress or an employee of a Member of Congress on his or her behalf in connection with the award of any resultant contract. If any registrants under the Lobbying Disclosure Act of 1995 have made a lobbying contact on behalf of the offeror with respect to this contract, the offeror shall complete and submit, with its offer, OMB Standard Form LLL, Disclosure of Lobbying Activities, to provide the name of the registrants. The offeror need not report regularly employed officers or employees of the offeror to whom payments of reasonable compensation were made.

(f) Buy American Certificate. (Applies only if the clause at Federal Acquisition…