Solicitation_Package_-_SP06062606.pdf
PDF 5 MB Posted
- Attached to
- SP06062606 Refrigeration Equipment M&R
- Solicitation number
- 0000040922
- Issued by
- Kings County, Anaheim City, California
About this file
This Invitation for Bid (IFB) document is issued by the California Correctional Training and Rehabilitation Authority (CALCTRA) for refrigeration equipment preventative maintenance and repair services. The solicitation seeks a contractor to provide preventative maintenance programs and repair services for various refrigeration equipment located at the Poultry Processing Plant at Avenal State Prison in Avenal, California. The contractor will service 12 refrigeration units including Chandler Refrigeration, Silva Cold Zone, Airco-CO2, Bohn Refrigeration, and Manitowoc equipment, with maintenance scheduled twice yearly. Prospective bidders must submit sealed bids by December 1, 2026, at 3:00 PM Pacific Time to Rommel Disuanco, Contract Analyst, at the CALCTRA office in Folsom, California. The final date for questions and answers is November 17, 2026. Award notification is anticipated on December 3, 2026, with a proposed contract start date of February 1, 2027. The contract term is two years with an option to extend for one additional year. Services must be performed during normal working hours (7:00 AM to 4:00 PM, Monday through Friday) at the facility location.
Award will be based on best value as determined by CALCTRA considering cost, past performance, and bidder experience. Bidders must demonstrate five years of experience with similar refrigeration maintenance services and provide three professional references from projects completed within the last three years. All bids must comply with prevailing wage requirements as determined by the California Department of Industrial Relations, and contractors must be registered with the DIR. Bidders are required to submit proof of required licenses and permits, insurance certificates, a Payee Data Record (STD 204), a Darfur Certification, PREA compliance forms, and Economic Sanctions Certification. CALCTRA does not grant Small Business, Disabled Veteran Business Enterprise, Target Area Contract Preference Act, Local Agency Military Base Recovery Act, or Enterprise Zone Act preferences. The contractor must provide all labor, materials, non-consumable supplies, travel, and insurance as part of the contract cost. Hourly labor rates quoted by the bidder will be binding for the contract term, with separate rates specified for Monday-Friday standard hours, overtime hours, weekend work, and holiday work. All replacement parts must be factory-approved, and part procurement will be handled separately through CALCTRA purchase orders.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Bidders_Instructions_REV_0925.pdf | ||
| General_Provisions_REV_1025.pdf | ||
| Security_Provisions_REV_0925.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
State of California Department of Corrections and Rehabilitation
November 10, 2026
INVITATION FOR BID (IFB)
IFB No. SP06062606
REFRIGERATION EQUIPMENT PREVENTATIVE MAINTENANCE AND REPAIR
Notice to Prospective Contractors
The California Correctional Training and Rehabilitation Authority (CALCTRA) invites you to review and respond to this Invitation for Bid (IFB), entitled REFRIGERATION EQUIPMENT PREVENTATIVE MAINTENANCE AND REPAIR, IFB NO. SP06062606. In submitting your bid, you must comply with the instructions found herein and the Bidders Instructions REV-0925 located on the CALCTRA website (www.calctra.ca.gov, select About tab and then Doing Business with CALCRTA).
In the opinion of CALCTRA, this IFB is complete and without need of explanation. However, should you have questions, or need clarifying information, please contact the Contract Analyst indicated below.
Due Date/Time: December 1, 2026 by 3:00 PM Contact SUBMIT BID TO:
Rommel Disuanco, Contract Analyst Phone: (916) 628-5804
Email: Rommel.Disuanco@calctra.ca.gov
California Correctional Training and Rehabilitation Authority
Attention: Rommel Disuanco, Contract Analyst 560 East Natoma Street
Folsom, CA 95630
Please note that no verbal information given will be binding upon the CALCTRA unless such information is issued in writing as an official addendum to this IFB.
Term: The CALCTRA anticipates that the proposed contract term will be for a period of two (2) years with the option to extend for an additional one (1) year.
The contract award will be made on the basis of BEST VALUE as determined by CALCTRA alone, under statutory authority (Penal Code 2808) considering the following criteria:
1. Cost: Fair, reasonable, and competitive price, and customer service commitments for goods and or services.
2. Performance: Past performance, including but not limited to, quality and/or reliability for the product or service as well as efficient billing practices; certification by the International Organization for Standardization (ISO).
3. Experience: Length of time and/or number of instances the bidder has offered or produced the requested type of product and/or service.
http://www.calctra.ca.gov/ mailto:Rommel.Disuanco@calctra.ca.gov
CALCTRA may consider other factors deemed necessary to ensure that best value is achieved.
In the interest of achieving best value, CALCTRA does not grant Small Business, Disabled Veteran Business Enterprise (DVBE), Target Area Contract Preference Act (TACPA), Local Agency Military Base Recovery Act (LAMBRA), or Enterprise Zone Act (EZA) preferences in evaluating bids.
Employment of ex-offenders by the bidder is encouraged by CALCTRA as part of our ongoing mission to change lives through opportunities.
Any agreement resulting from this solicitation shall be of no force or effect until it is signed by both parties and approved by CALCTRA. The Contractor is not to begin work until a contract has been made, all approvals have been obtained, and the contract has been fully executed. Should work begin before all approvals are obtained, services shall be considered voluntary.
California Correctional Training and Rehabilitation Authority (CALCTRA) Refrigeration Equipment Preventative Maintenance & Repair
IFB No. SP06062606
TABLE OF CONTENTS
SECTION PAGE
A. Purpose and Description of Service 4 B. Bid Information 4 C. Bidder’s Submittal Requirements 5 D. Bid Evaluation 6 E. Licenses and Permits 6 F. Standard Language 6 G. Bid Attachments 6
Attachment 1: Bid Document Submittal Check List 7 Attachment 2: Sample Standard Agreement (STD 213), Statement of
Work and Payment Provisions 8
Attachment 3: Cost Sheet 25 Attachment 4A: Payee Data Record (STD 204) 27 Attachment 4B: Payee Data Record Supplement (STD 205) 29 Attachment 5: Darfur Certification 31 Attachment 6: Appropriate Attire Policy 32 Attachment 7: Experience/Past Performance (References) 34 Attachment 8: Contractor Certification Clauses (CCC’s) 35 Attachment 9: PREA Volunteer/Contractor Information Sheet 39 Attachment 10: Economic Sanctions Certification 42
Bid Submittal Documents:
Attachment 1: Bid Document Submittal Check List 1 page Attachment 3: Cost Sheet 2 pages Attachment 4A: Payee Data Record (STD 204) 2 pages Attachment 4B: Payee Data Record Supplement (STD 205) 2 pages Attachment 5: Darfur Certification 1 page Attachment 7: Experience/Past Performance (References) 1 page Attachment 8: Contractor Certification Clauses (CCC’s) 4 pages Attachment 9: PREA Volunteer/Contractor Information Sheet 3 pages Attachment 10: Economic Sanctions Certification 1 page
Bidder Instructions and Contract Provisions:
Bidders Instructions REV-0925* 10 pages General Provisions REV-1025* 22 pages Security Provisions REV-0925* 5 pages
NOTE: Items shown with an Asterisk (*), are hereby incorporated by reference and are located on our website at the following link http://www.calctra.ca.gov select About tab, then select Doing Business with CALCTRA.
California Correctional Training and Rehabilitation Authority (CALCTRA) Refrigeration Equipment Preventative Maintenance & Repair
A. Purpose and Description of Service
The California Correctional Training and Rehabilitation Authority (CALCTRA) requires a Preventative Maintenance Program (PMP) and repair service for various refrigeration equipment located at the Poultry Processing Plant at Avenal State Prison (ASP).
Refer to the Sample STD 213, Statement of Work and Payment Provisions, attached to this IFB as Attachment 2.
CALCTRA reserves the right, before the conclusion of the contract term to extend the contract for an additional one-year period. A written and approved amendment will be required to extend the contract prior to contract expiration.
B. Bid Information
1. Time Schedule
It is recognized that time is of the essence. All bidders are hereby advised of the following schedule and will be expected to adhere to the required dates and times. All times are Pacific Standard Time (PST)/Pacific Daylight Time (PDT).
*estimated timeframes
2. Bid Submittal
Bids must be received via U.S. Mail, common carrier, or hand delivered; no other method of response will be accepted. Bids not submitted under sealed cover may be rejected. Submit one (1) copy of the bid to the address and Contract Analyst on page 1 of this document. The interior sealed envelope must be plainly marked with the IFB number and title, must show your firm name and address, and must be marked with “DO NOT OPEN”, as shown in the following example:
EVENT DATE
TIME
(Pacific STD /Daylight Time)
IFB available to prospective bidders 11/10/26 Final Date for Q&A Submission 11/17/26 3:00 PM Final Date for Bid Submission/Bid Opening 12/1/26 By 3:00 PM Successful Bidder Letter and Posting of Intent to Award* 12/3/26 5:00 PM
Last Day to Appeal Intent to Award* 12/10/26 5:00 PM Proposed Start Date of Agreement* 2/1/27
Company Name Company Address
IFB Number: SP06062606 IFB Name: Refrigeration Equipment Preventative Maintenance and Repair Services Attention: Rommel Disuanco
BID SUBMITTAL – DO NOT OPEN
California Correctional Training and Rehabilitation Authority (CALCTRA)
C. Bidder’s Submittal Requirements
Experience: Contractor must provide proof of 5 years of experience with services similar in nature to the services identified in the attached Scope of Work. Experience will be determined by documentation submitted by the Contractor and further information provided by the references submitted under the Past Performance requirement below. Experience is defined as the kind and amount of work a Contractor has done relevant to the work contemplated by this procurement.
Past Performance: Contractor will be evaluated on prior performance through Contractor’s references (Attachment 7), on three (3) projects similar in nature within the last three (3) years.
Past performance is defined as the Contractor’s record of conforming to standards of good workmanship; Contractor’s record of forecasting and controlling costs; Contractor’s adherence to contract schedules, including the administrative aspects of performance; Contractor’s history of reasonable and cooperative behavior and commitment to customer satisfaction; and the Contractor’s business-like concern for the interest of the customer.
Licenses/Permits: The Contractor shall provide copies of all required license(s) and permit(s) as required by the city, county, or both as determined by bidder’s place of business.
Executive Order N-6-22 – Russia Sanctions:
CALCTRA requires Bidders to include a completed Economic Sanctions Certification form (BSS-F069) as required by Executive Order N-6-22 in order to be eligible to conduct business with the State of California.
Executive Order N-12-23 – Generative Artificial Intelligence (GenAI):
The State of California seeks to realize the potential benefits of GenAI, through the development and deployment of GenAI tools, while balancing the risks of these new technologies.
Bidder / Offeror must notify the State in writing if it: (1) intends to provide GenAI as a deliverable to the State; or (2), intends to utilize GenAI, including GenAI from third parties, to complete all or a portion of any deliverable that materially impacts: (i) functionality of a State system, (ii) risk to the State, or (iii) Contract performance. For avoidance of doubt, the term “materially impacts” shall have the meaning set forth in State Administrative Manual (SAM) §
4986.2 Definitions for GenAI.
Failure to report GenAI to the State may result in disqualification. The State reserves the right to seek any and all relief to which it may be entitled to as a result of such non-disclosure.
Upon notification by a Bidder / Offeror of GenAI as required, the State reserves the right to incorporate GenAI Special Provisions into the final contract or reject bids/offers that present an unacceptable level of risk to the State.
Government Code 11549.64 defines “Generative Artificial Intelligence (GenAI)” as an artificial intelligence system that can generate derived synthetic content, including text, images, video, and audio that emulates the structure and characteristics of the system’s training data.
California Correctional Training and Rehabilitation Authority (CALCTRA)
Prevailing Wages: All bids must meet or exceed prevailing wage requirements as governed and defined by the Department of Industrial Relations (DIR) and accessible via the following website: https://dir.ca.gov/OPRL/DPreWageDetermination.htm.
Registration with Department of Industrial Relations (DIR): CALCTRA requires any contractor or subcontractor responding to a bid with prevailing wage requirements to be registered with the DIR. Bidders shall submit proof of registration with DIR to CALCTRA with the bid response.
The Bidder shall be responsible to ensure all subcontractors are registered with DIR as well.
D. Bid Evaluation
Award of a contract resulting from this IFB will be based on the contractor providing the best value. The Contractor must meet or exceed the minimum requirements of the following criteria:
Category – Description Cost Past Performance Experience
E. Licenses and Permits
During the term of the contract, the Contractor must maintain all required licenses and/or permits in full force and effect. If and when the State learns that the Contractor has failed to do so, the State may, in addition to any other remedy it may have, immediately terminate this contract without any cost or liability to the State. If, after bid submission, the Contractor replaces or renews a required license or permit or obtains a newly-applicable license or permit, the Contractor shall provide the State with a copy of the renewed or replaced or newly-obtained license or permit within 20 days following the Contractor's receipt of same.
F. Standard Language
CALCTRA does not accept alternate contract language from a prospective contractor. A bid with such language will be considered a counter proposal and will be rejected. CALCTRA’s General Provisions (GP’s) are not negotiable.
G. Bid Attachments
Refer to the following pages for additional required attachments that are a part of this IFB.
California Correctional Training and Rehabilitation Authority (CALCTRA) https://dir.ca.gov/OPRL/DPreWageDetermination.htm
ATTACHMENT 1
BID DOCUMENT SUBMITTAL CHECK LIST
A complete bid or bid package will consist of the items identified below.
Complete this checklist to confirm the items listed below have been included in your bid. Place a check mark or “X” next to each item that you are submitting. For your bid to be responsive, all required attachments must be returned. This checklist should be returned with your bid package.
NAME OF BIDDER:
COMPANY NAME:
Attachment Name/Description
_____ Attachment 1: Bid Document Submittal Check List _____ Attachment 3: Cost Sheet _____ Attachment 4A: Payee Data Record (STD 204) NOTE: If company is incorporated, Payee’s Legal business name on the STD 204 must match the name registered with the Secretary of State of California.
_____ Attachment 4B: Payee Data Record Supplement (STD 205) NOTE: For use if additional remittance addresses are needed or if additional authorized representatives need to be identified.
_____ Attachment 5: Darfur Certification _____ Attachment 7: Experience/Past Performance (References) _____ Attachment 8: Contractor’s Certification Clauses _____ Attachment 9: PREA Volunteer/Contractor Information Sheet _____ Attachment 10: Economic Sanctions Certification
Additional Items Description (If Applicable)
_____ Copy of applicable CSLB license(s) (Outlined on Page 5 in Section C)
_____ Copy of Business License(s) and/or permit(s) as required by the state, city, and/ or county (Outlined on Page 5 in Section C)
_____ Proof of Department of Industrial Relations (DIR) registration
California Correctional Training and Rehabilitation Authority (CALCTRA)
STATE OF CALIFORNIA
STANDARD AGREEMENT
STD 213 (Rev 6/21/06) AGREEMENT NUMBER
SP06062606
REGISTRATION NUMBER
Refrigeration Equipment Preventative Maintenance and Repair Services
DIR Project #
1. This Agreement is entered into between the State Agency and the Contractor named below:
STATE AGENCY'S NAME
CALIFORNIA CORRECTIONAL TRAINING AND REHABILITATION AUTHORITY
CONTRACTOR'S NAME
TBD
2. The term of this
Month Day, 2027 or upon approval, whichever is the later, through Month Day, 2029 Agreement is:
3. The maximum amount $ of this Agreement is: Dollars and No Cents
4. The parties agree to comply with the terms and conditions of the following exhibits that by this reference made a part of the Agreement.
Attachment 2 - Scope of Work and Payment Provisions 6 pages
Attachment 3 - Cost Sheet 1 page
Exhibit A – Equipment List 1 page
Exhibit B – Reference Photos 9 pages
General Provisions REV-1025 22 pages
Security Provisions REV-0925* 5 pages NOTE: Items shown with an Asterisk (*), are hereby incorporated by reference and made part of this agreement as if attached hereto.
These documents can be viewed at http://www.calctra.ca.gov, (select About tab, then select Doing Business with CALCTRA).
IN WITNESS WHEREOF, this Agreement has been executed by the parties hereto.
CONTRACTOR
CONTRACTOR’S NAME (if other than an individual, state whether a corporation, partnership, etc.)
BY (Authorized Signature)
DATE SIGNED(Do not type)
PRINTED NAME AND TITLE OF PERSON SIGNING
ADDRESS
STATE OF CALIFORNIA
AGENCY NAME
California Correctional Training and Rehabilitation Authority BY (Authorized Signature)
DATE SIGNED(Do not type)
PRINTED NAME AND TITLE OF PERSON SIGNING
ADDRESS
560 East Natoma Street Folsom, CA 95630
SAMPLE
Contractor Initial _______
SCOPE OF WORK AND PAYMENT PROVISIONS
I. SCOPE OF WORK
1. Contractor agrees to provide the California Correctional Training and Rehabilitation Authority
(CALCTRA) with a Preventative Maintenance Program (PMP) and repair service for various refrigeration equipment located at the Poultry Processing Plant at Avenal State Prison (ASP).
A. The Contractor shall furnish all labor, including travel and per diem, materials, non-consumable supplies, parking fees and bridge tolls, insurance, transportation, equipment and every other item of expense necessary to perform services.
B. Services shall be performed on, but not limited to, the equipment delineated in the Equipment List, Exhibit A, which is attached hereto and made a part of this agreement.
1) CALCTRA reserves the right to delete from, and/or add refrigeration units to, the equipment list established within this agreement.
2) Equipment removals and/or additions shall be issued to the Contractor in writing by the CALCTRA Project Representative, or designee.
3) Any additional equipment will be serviced at the rates specified on the Cost Sheet, Attachment 3.
2. The services shall be performed at the CALCTRA Poultry Processing Plant located at:
Avenal State Prison (ASP) #1 Kings Way Avenal, CA 93204.
3. The services shall be provided during normal working hours from 7:00 AM to 4:00 PM, Monday through Friday, as directed by the CALCTRA Project Representative, or designee.
4. Service shall be available not later than the express date set by CALCTRA and the Contractor, after all approvals have been obtained, the agreement is fully executed, and a Sage X3 Tracking Number is issued. Should the Contractor fail to commence work at the agreed upon time, the CALCTRA, upon five (5) days written notice to the Contractor, reserves the right to terminate the agreement effective immediately. In addition, the Contractor shall be liable to the CALCTRA for the difference between Contractor's bid price and the actual cost of performing work by another best value contractor.
5. The Project Representatives during the term of this agreement will be:
State Agency: CALCTRA Contractor:
Section/Unit: Poultry Processing Plant Section/Unit:
Attention: Attention:
Address: #1 Kings Way Avenal, CA 93204
Address:
Phone: Phone:
Email: @calctra.ca.gov Email:
Note: No formal amendment of this agreement is needed to change the contact information. Changes will be made by written or electronic notification.
6. Contractor shall furnish to CALCTRA a certificate of insurance, stating that there is Commercial General Liability, Worker’s Compensation, and Automotive Liability. The certificate of insurance shall include the following three (3) provisions in their entirety:
California Correctional Training and Rehabilitation Authority (CALCTRA) mailto:Temo.Cortes@calpia.ca.gov
A. The insurer will not cancel the insured’s coverage without 30 days prior written notice to the State, and will provide the State with a written 10-day notice for Contractor’s non-payment of premiums.
B. Under Contractor’s General Liability and Automobile Liability insurance CALCTRA and the State of California, its officers, agents, employees, and servants are included as additional insured, but only insofar as the operations under this contract are concerned.
C. The State will not be responsible for any premiums or assessment on the policy.
7. The work being performed under this agreement is subject to prevailing wage rates as governed and defined by the Department of Industrial Relations (DIR) at the following website: https://dir.ca.gov/OPRL/DPreWageDetermination.htm.
A. Contractor agrees to comply with all applicable provisions of the Labor Code including those provisions requiring the payment of not less than the general prevailing rate of wages.
B. Contractor must be registered with the DIR and maintain current registration for the duration of this agreement. Contractor shall be responsible to ensure all subcontractors are registered with the DIR and that their registration is current.
C. Contractor shall maintain records of proof that prevailing wage is paid to workers in accordance with DIR reporting requirements.
D. Projects of $30,000.00 or more must meet DIR’s apprenticeship requirements.
E. Contactor further agrees to penalties and forfeitures provided in the Labor Code in the event a violation of any of the provisions occur in the execution of this agreement.
8. Contractor shall provide a Preventative Maintenance Program (PMP) and perform services every six (6) months, including but are not limited to the following:
A. Evaporators:
1) Tighten all electrical connections in the electrical panel
2) Check for frayed wiring insulation, and corroded terminals
3) Replace damaged wiring as needed
4) Ensure all spade connections are tight
5) Inspect fan motors and blades for unusual wear patterns or stress fractures
6) Replace any worn blades and tighten all fan set screws
7) Apply the correct lubricant to motors with lubrication fittings
8) Replace any motor that is hard to rotate and/or has worn bearings
9) Inspect and check all defrost heaters for correct amp draw
10) Check the voltage at each heater terminal and ensure terminals are in good condition
11) Inspect the drain pan and ensure proper drainage is occurring, make recommendations as needed
12) Check evaporators for proper defrosting
13) Inspect the evaporator coil surface and make recommendations as needed.
14) Evaporator coil washing and cleaning.
California Correctional Training and Rehabilitation Authority (CALCTRA)
B. Compressor Units:
1) Tighten all electrical connections
2) Check for frayed wiring insulation, and corroded terminals
3) Replace damaged wiring as needed
4) Ensure all spade connections are tight
5) Check all electrical components and contactors
6) Inspect the defrost timer motor
7) Clean the contact points and lubricate the gears of the clock
8) Check all relays for work points and replace as necessary
9) Check the electrical connections inside the compressor electrical box
10) Check the operation of the control system
11) Check the oil level in the compressors
12) Check the operation of the defrost controls
13) Check the condition of refrigerant line insulation
14) Ensure the refrigerant level is acceptable
15) Check the system’s superheat at the condensing unit
16) Inspect all capillary and super hose lines for signs of wear
17) Replace all missing valve caps and unit covers.
C. Condensers:
1) Check the operation of condenser fans
2) Inspect fan motors and blades for unusual wear patterns or stress fractures
3) Replace any worn blades and tighten all fan set screws
4) Lubricate the motors as needed and replace any motor that is worn.
5) Condenser coil washing and cleaning.
9. Contractor shall maintain and submit a complete maintenance log/report to the CALCTRA Project Representative, or designee, for each service provided.
10. All work shall be completed to the satisfaction of the CALCTRA Project Representative, or designee.
11. Schedule of Services:
A. Two (2) PMP (Service PM) yearly call for each 12-month period from the effective date of this agreement.
B. A specific time and date for the subsequent PMP service shall be scheduled by the service representative and mutually agreed upon by the CALCTRA Project Representative, or designee, at the end of each service or at least with a minimum of seven (7) days advance notice.
C. Contractor shall respond to all other requests for repair services (those outside of the PMP service) within twenty-four hours of notification to schedule a time for the service.
California Correctional Training and Rehabilitation Authority (CALCTRA)
12. Contractor shall consult with the CALCTRA Project Representative, or designee, on operational or maintenance procedures and make recommendations for any necessary repairs.
A. Contractor shall provide an itemized list of recommended repair parts to the CALCTRA
Project Representative, or designee.
B. All replacement parts and ordering will be done separate of this agreement on a
CALCTRA Purchase Order (PIA-099), referencing this agreement number.
C. All replacement parts used in the maintenance and repair of equipment serviced under this agreement shall be factory approved parts.
D. Contractor shall install repair parts upon approval from the CALCTRA Project
Representative or designee.
13. Executive Order N-6-22 – Russia Sanctions
On March 4, 2022, Governor Gavin Newsom issued Executive Order N-6-22 (the EO) regarding Economic Sanctions against Russia and Russian entities and individuals.
“Economic Sanctions” refers to sanctions imposed by the U.S. government in response to Russia’s actions in Ukraine, as well as any sanctions imposed under state law. The EO directs state agencies to terminate contracts with, and to refrain from entering any new contracts with, individuals or entities that are determined to be a target of Economic Sanctions. Accordingly, should the State determine Contractor is a target of Economic Sanctions or is conducting prohibited transactions with sanctioned individuals or entities, that shall be grounds for termination of this agreement. The State shall provide Contractor advance written notice of such termination, allowing Contractor at least 30 calendar days to provide a written response. Termination shall be at the sole discretion of the State.
14. Executive Order N-12-23 – Generative Artificial Intelligence (GenAI) GenAI Technology Use & Reporting During the term of the contract, Contractor must notify the State in writing if their services or any work under this contract includes, or makes available, any previously unreported GenAI technology, including GenAI from third parties or subcontractors. At the direction of the State, Contractor shall discontinue the use of any new or previously undisclosed GenAI technology that materially impacts functionality, risk or contract performance, until use of such GenAI technology has been approved by the State.
The State reserves the right to amend the contract, without additional cost, to incorporate GenAI Special Provisions into the contract at its sole discretion and/or terminate any contract that presents an unacceptable level of risk to the State.
15. CALCTRA reserves the right to amend the agreement, prior to expiration, in writing on the STD 213A. CALCTRA may adjust the terms of the agreement including but not limited to the following:
A. Term extension up to one (1) year.
B. Decreasing the amount of the contract’s original value.
C. Increasing the contract amount by up to 30% of the original value.
California Correctional Training and Rehabilitation Authority (CALCTRA)
II. PAYMENT PROVISIONS
1. Invoicing and Payment
A. For services satisfactorily rendered, and upon receipt and approval of the invoices, the CALCTRA agrees to compensate the Contractor in accordance with the amount specified in the Cost Sheet which is attached hereto and made part of this agreement.
B. Any and all costs incurred by the Contractor of the Contractor’s employees for subsistence, travel, or time necessary to travel to and/or from ASP, shall be the responsibility of the Contractor and are included in the contract amount.
C. Invoices shall be itemized and include the time period covered by the invoice, work completed for the period (detailed statement of services) and number of hours worked (if applicable). Invoices shall include the six-digit Purchase Order (Sage X3) Number and the Agreement Number referenced in the executed contract cover letter. Invoices shall be submitted in triplicate not more frequently than once every 30 days in arrears to:
California Correctional Training and Rehabilitation Authority (CALCTRA) Attention: TBD #1 Kings Way
Avenal, CA 93204 D. All invoice packages must contain original documents and be legible. Failure to provide original, legible documents will delay payment at Contractor’s expense.
E. Accurate/correct invoice packages must be submitted for review and payment in a timely manner subject to the following:
i. All invoices, including revised/amended/corrected invoices, must be received by
CALCTRA within 60 days from the date services were rendered.
ii. Invoices received by CALCTRA more than 60 days after the date services were rendered will be denied, deemed a forfeiture of payment by Contractor, and no payment will be issued.
a. It is Contractor’s responsibility to ensure invoices are received by CALCTRA by the deadline. No exceptions will be allowed for invoice packages lost in transit unless supported by documentation that it should have arrived on time (i.e., proof of overnight delivery).
b. If a revision/amendment/correction of a timely submitted invoice is requested by CALCTRA, payment will not be forfeited if the requested invoice is received more than 60 days after the date services were rendered.
iii. All invoices received shall be deemed accurate/correct unless Contractor provides CALCTRA with written notice of any error(s) within 60 days from the date services were rendered. Written notice must include a written explanation of the change, a revised/amended/corrected invoice, and supporting documentation.
iv. Invoices received by CALCTRA on the 60th day from the date services were rendered cannot be revised/amended/corrected by Contractor except at the request of
CALCTRA.
F. Contractors unable to provide accurate/correct invoice packages in a timely manner may receive a vendor performance report for failure to meet contract needs. Patterns related to failed vendor performance may result in termination of contract at any time.
California Correctional Training and Rehabilitation Authority (CALCTRA)
G. Contractor is to provide a monthly report showing billed, paid, and outstanding invoices.
2. Availability of Funds
All financial obligations of CALCTRA for the fiscal year(s) encompassed by the term of this agreement are subject to the availability and approval of funding by the California Correctional Training and Rehabilitation Board and/or the presence of sufficient funds to cover those obligations in the fund from which those obligations are to be paid. If such obligations are, or become contingent, on funding by and/or through the CALCTRA budget or on the availability of federal funds or on the action of any Legislative body, said obligations are contingent on the appropriation and availability of funds for the purpose of meeting those obligations. If insufficient funds are approved or appropriated or otherwise available in order to meet CALCTRA’s obligations under this agreement, CALCTRA may immediately terminate this agreement.
3. Prompt Payment Clause Payment will be made in accordance with, and within the time specified in, Government Code Chapter 4.5, commencing with Section 927. Unless expressly exempted by statute, the Act requires State agencies to pay properly submitted, undisputed invoices not more than 45 days after (a) the date of acceptance of goods or performance of services or (b) receipt of an undisputed invoice, whichever is later.
4. Cash Discounts CALCTRA has a history of taking cash discounts and intends to take advantage of cash discounts offered when they are in the best interest of the CALCTRA.
California Correctional Training and Rehabilitation Authority (CALCTRA)
EXHIBIT A
EQUIPMENT LIST
Make Compressor Refrigerant Location Serial No./ CALCTRA Equip. No.
Chandler Refrigeration® Copeland® R-416A Spiral Freezer Room 59693
Chandler Refrigeration® Copeland® R-416A Spiral Freezer Room 59694
Chandler Refrigeration® Copeland® R-416A Spiral Freezer Room 02773
Silva Cold Zone® Copeland® R-416A Sizing Room 02311/2579CC C-8
Silva Cold Zone® Copeland® R-416A Dicing Room 02312/2580CC C-8
Silva Cold Zone® Copeland® R-416A Walk-in Cooler 02313/2581CC C-8
Airco-CO2® Copeland® R-404A CO2 Tank 3087384V
Bohn Refrigeration Unit® Copeland® R-404A Large Freezer # 1 T03L00044
Bohn Refrigeration Unit® Copeland® R-404A Large Freezer # 2 T03L00045
Bohn Refrigeration Unit® Copeland® R-404A Large Freezer # 3 T03L00046
Bohn Refrigeration Unit® Copeland® R-404A Large Freezer # 4 T03L00047
Manitowoc Unknown R-404A Ice room 110890734
California Correctional Training and Rehabilitation Authority (CALCTRA)
EXHIBIT B
REFERENCE PHOTOS
ATTACHMENT 3
COST SHEET
The estimated quantities indicated below will be used solely for computing the cost to determine the best value bidder and is not binding upon the contracting agency. However, the actual costs quoted by the bidder shall be binding for the term of the Agreement. CALCTRA is not obligated to purchase any quantity of services from the contractor.
Under no circumstances will the contractor be allowed to use a subcontractor for more than 50% of the contract dollar amount. For all services where a subcontractor is used, the contractor will be required to provide a minimum of 50% of the staffing for the project including project contact person.
It is unlawful for any person engaged in business within this state to sell or use any article or product as a “loss leader” as defined in Section 17030 of the Business and Professions Code.
Item Description Quoted Rates
Preventative Maintenance Program
(PMP) & Repairs A minimum of one (1) PMP call for each 12-month period from the effective date of this agreement
Hourly Labor Rates:
Monday – Friday
1 – 8 Hour(s) (First 8 hours) $ /Hour*
9 + Hours (After 8 hours) $ /Hour* (when over 8 hours)
Hourly Labor Rate:
Weekends
Saturdays (Anytime) $ /Hour* Sundays (Anytime) $ /Hour*
Hourly Labor Rate:
Holidays Holidays (Anytime) $ /Hour*
NOTE: The Contractor’s bid amount includes all charges for travel to and from ASP *Rates meet or exceed prevailing wage requirements as governed and defined by the Department of
Industrial Relations (DIR) and accessible via the following website:
https://dir.ca.gov/OPRL/DPreWageDetermination.htm
All replacement parts used in the maintenance and repair of equipment serviced under this agreement shall be new manufacturer approved parts.
Replacement parts and ordering of such will be done separate of this agreement on a CALCTRA Purchase Order (PIA-099), referencing this Agreement Number.
See Bidders Instructions Item 26 for complete instructions on offering Cash Discounts.
_____% Cash discount for payment within __________ days of receipt.
California Correctional Training and Rehabilitation Authority (CALCTRA)
ATTACHMENT 3
COST SHEET CONTINUED
For accounting reporting purposes, please provide the following information: Are you certified with the California Department of General Services, Office of Small Business Certification and Resources (OSBCR) as:
a. California Small Business Micro Business
Yes No Yes No
If yes, enter certification number: _________ Expiration Date: __________
b. Disabled Veteran Business Enterprise Yes No
If yes, enter your service code: __________
NAME OF
BIDDER:
COMPANY NAME
ADDRESS:
PHONE: FAX:
EMAIL:
AUTHORIZED
NAME: PLEASE PRINT
AUTHORIZED
SIGNATURE DATE:
TITLE:
California Correctional Training and Rehabilitation Authority (CALCTRA)
STATE OF CALIFORNIA – DEPARTMENT OF FINANCE
PAYEE DATA RECORD
(Required when receiving payment from the State of California in lieu of IRS W-9 or W-7) STD 204 (Rev. 03/2021)
Section 1 – Payee Information NAME (This is required. Do not leave this line blank. Must match the payee’s federal tax return)
BUSINESS NAME, DBA NAME or DISREGARDED SINGLE MEMBER LLC NAME (If different from above)
MAILING ADDRESS (number, street, apt. or suite no.) (See instructions on Page 2)
CITY, STATE, ZIP CODE E-MAIL ADDRESS
Section 2 – Entity Type Check one (1) box only that matches the entity type of the Payee listed in Section 1 above. (See instructions on page 2)
CORPORATION (see instructions on page 2)SOLE PROPRIETOR / INDIVIDUAL MEDICAL (e.g., dentistry, chiropractic, etc.)SINGLE MEMBER LLC Disregarded Entity owned by an individual
PARTNERSHIP
ESTATE OR TRUST
LEGAL (e.g., attorney services)
EXEMPT (e.g., nonprofit)
ALL OTHERS
Section 3 – Tax Identification Number Enter your Tax Identification Number (TIN) in the appropriate box. The TIN must match the name given in Section 1 of this form. Do not provide more than one (1) TIN.
The TIN is a 9-digit number. Note: Payment will not be processed without a TIN.
For Individuals, enter SSN.
If you are a Resident Alien, and you do not have and are not eligible to get an SSN, enter your ITIN.
Grantor Trusts (such as a Revocable Living Trust while the grantors are alive) may not have a separate FEIN. Those trusts must enter the individual grantor’s SSN.
For Sole Proprietor or Single Member LLC (disregarded entity), in which the sole member is an individual, enter SSN (ITIN if applicable) or FEIN (FTB prefers SSN).
For Single Member LLC (disregarded entity), in which the sole member is a business entity, enter the owner entity’s FEIN. Do not use the disregarded entity’s FEIN.
For all other entities including LLC that is taxed as a corporation or partnership, estates/trusts (with FEINs), enter the entity’s FEIN.
Social Security Number (SSN) or Individual Tax Identification Number (ITIN)
OR
Federal Employer Identification Number
(FEIN)
Section 4 – Payee Residency Status (See instructions)
CALIFORNIA RESIDENT – Qualified to do business in California or maintains a permanent place of business in California.
CALIFORNIA NONRESIDENT – Payments to nonresidents for services may be subject to state income tax withholding.
No services performed in California
Copy of Franchise Tax Board waiver of state withholding is attached.
Section 5 – Certification I hereby certify under penalty of perjury that the information provided on this document is true and correct.
Should my residency status change, I will promptly notify the state agency below.
NAME OF AUTHORIZED PAYEE REPRESENTATIVE TITLE E-MAIL ADDRESS
SIGNATURE DATE TELEPHONE (include area code)
Section 6 – Paying State Agency Please return completed form to:
UNIT/SECTION
MAILING ADDRESS FAX TELEPHONE (include area code)
CITY STATE ZIP CODE
STATE AGENCY/DEPARTMENT OFFICE
California Correctional Training & Rehabilitation Authority (CALCTRA) Business Services Section (BSS)
560 East Natoma Street (916) 358-1811 (916) 358-2755
Folsom CA 95630
E-MAIL ADDRESS
bsshelpdesk@calctra.ca.gov
Print Form Reset Form
ATTACHMENT 4A
California Correctional Training and Rehabilitation Authority (CALCTRA) Refrigeration Equipment Preventative Maintenance and Repair
IFB No. SP06062606
GENERAL INSTRUCTIONS
Type or print the information on the Payee Data Record, STD 204 form. Sign, date, and return to the state agency/department office address shown in Section 6.
Prompt return of this fully completed form will prevent delays when processing payments.
Information provided in this form will be used by California state agencies/departments to prepare Information Returns (Form1099).
NOTE: Completion of this form is optional for Government entities, i.e. federal, state, local, and special districts.
A completed Payee Data Record, STD 204 form, is required for all payees (non-governmental entities or individuals) entering into a transaction that may lead to a payment from the state. Each state agency requires a completed, signed, and dated STD 204 on file; therefore, it is possible for you to receive this form from multiple state agencies with which you do business.
Payees who do not wish to complete the STD 204 may elect not to do business with the state. If the payee does not complete the STD 204 and the required payee data is not otherwise provided, payment may be reduced for federal and state backup withholding. Amounts reported on Information Returns (Form 1099) are in accordance with the Internal Revenue Code (IRC) and the California Revenue and Taxation Code (R&TC).
Section 1 – Payee Information Name – Enter the name that appears on the payee's federal tax return. The name provided shall be the tax liable party and is subject to IRS TIN matching (when applicable).
Sole Proprietor/Individual/Revocable Trusts – enter the name shown on your federal tax return.
Single Member Limited Liability Companies (LLCs) that is disregarded as an entity separate from its owner for federal tax purposes - enter the name of the individual or business entity that is tax liable for the business in section 1. Enter the DBA, LLC name, trade, or fictitious name under Business Name.
Note: for the State of California tax purposes, a Single Member LLC is not disregarded from its owner, even if they may be disregarded at the Federal level.
Partnerships, Estates/Trusts, or Corporations – enter the entity name as shown on the entity’s federal tax return. The name provided in Section 1 must match to the TIN provided in section 3. Enter any DBA, trade, or fictitious business names under Business Name.
Business Name – Enter the business name, DBA name, trade or fictitious name, or disregarded LLC name.
Mailing Address – The mailing address is the address where the payee will receive information returns. Use form STD 205, Payee Data Record Supplement to provide a remittance address if different from the mailing address for information returns, or make subsequent changes to the remittance address.
Section 2 – Entity Type If the Payee in Section 1 is a(n)… THEN Select the Box for…
Grantor (Revocable Living) Trust disregarded for federal tax purposes Sole Proprietor/Individual Limited Liability Company (LLC) owned by an individual and is disregarded for federal tax purposes Single Member LLC-owned by an individual Partnerships Limited Liability Partnerships (LLP) and, LLC treated as a Partnership Partnerships Estate Trust (other than disregarded Grantor Trust) Estate or Trust Corporation that is medical in nature (e.g., medical and healthcare services, physician care, nursery care, dentistry, etc. LLC that is to be taxed like a Corporation and is medical in nature
Corporation-Medical
Corporation that is legal in nature (e.g., services of attorneys, arbitrators, notary publics involving legal or law related matters, etc.) LLC that is to be taxed like a Corporation and is legal in nature
Corporation-Legal
Corporation that qualifies for an Exempt status, including 501(c) 3 and domestic non-profit corporations. Corporation-Exempt Corporation that does not meet the qualifications of any of the other corporation types listed above LLC that is to be taxed as a Corporation and does not meet any of the other corporation types listed above
Corporation-All Other
Section 3 – Tax Identification Number The State of California requires that all parties entering into business transactions that may lead to payment(s) from the state provide their Taxpayer Identification Number (TIN). The TIN is required by R&TC sections 18646 and 18661 to facilitate tax compliance enforcement activities and preparation of Form 1099 and other information returns as required by the IRC section 6109(a) and R&TC section 18662 and its regulations.
Section 4 – Payee Residency Status Are you a California resident or nonresident?
A corporation will be defined as a "resident" if it has a permanent place of business in California or is qualified through the Secretary of State to do business in California.
A partnership is considered a resident partnership if it has a permanent place of business in California.
An estate is a resident if the decedent was a California resident at time of death.
A trust is a resident if at least one trustee is a California resident.
o For individuals and sole proprietors, the term "resident" includes every individual who is in California for other than a temporary or transitory purpose and any individual domiciled in California who is absent for a temporary or transitory purpose. Generally, an individual who comes to California for a purpose that will extend over a long or indefinite period will be considered a resident. However, an individual who comes to perform a particular contract of short duration will be considered a nonresident.
For information on Nonresident Withholding, contact the Franchise Tax Board at the numbers listed below:
Withholding Services and Compliance Section: 1-888-792-4900 E-mail address: wscs.gen@ftb.ca.gov For hearing impaired with TDD, call: 1-800-822-6268 Website: www.ftb.ca.gov
Section 5 – Certification Provide the name, title, email address, signature, and telephone number of individual completing this form and date completed. In the event that a SSN or ITIN is provided, the individual identified as the tax liable party must certify the form. Note: the signee may differ from the tax liable party in this situation if the signee can provide a power of attorney documented for the individual.
Section 6 – Paying State Agency This section must be completed by the state agency/department requesting the STD 204.
Privacy Statement Section 7(b) of the Privacy Act of 1974 (Public Law 93-579) requires that any federal, state, or local governmental agency, which requests an individual to disclose their social security account number, shall inform that individual whether that disclosure is mandatory or voluntary, by which statutory or other authority such number is solicited, and what uses will be made of it. It is mandatory to furnish the information requested. Federal law requires that payment for which the requested information is not provided is subject to federal backup withholding and state law imposes noncompliance penalties of up to $20,000. You have the right to access records containing your personal information, such as your SSN. To exercise that right, please contact the business services unit or the accounts payable unit of the state agency(ies) with which you transact that business.
All questions should be referred to the requesting state agency listed on the bottom front of this form.
California Correctional Training and Rehabilitation Authority (CALCTRA) Refrigeration Equipment Preventative Maintenance and Repair
STATE OF CALIFORNIA – DEPARTMENT OF FINANCE
PAYEE DATA RECORD
(Required when receiving payment from the State of California in lieu of IRS W-9 or W-7) STD 204 (Rev. 03/2021)
IFB No. SP06062606
(This form is optional. Form is used to provide remittance address information if different than the mailing address on the STD 204 – Payee Data Record.
Use this form to provide additional remittance addresses and additional Authorized Representatives of the Payee not identified on the STD 204.)
Payee Information (must match the STD 204) NAME (Required. Do not leave blank.)
BUSINESS NAME, DBA NAME or DISREGARDED SINGLE MEMBER LLC NAME (If different from above)
TAX ID NUMBER (Required)
SSN, ITIN, or FEIN that matches Tax ID number provided on STD 204
Additional Remittance Address Information Use the fields below to provide remittance addresses for payee if different from the mailing address on the STD 204.
The addresses provided below are for remittance purposes only. 1099 information returns will be sent to the mailing address specified on the STD 204.
REMITTANCE ADDRESS (number, street, apt or suite no.)
CITY STATE ZIP CODE
REMITTANCE ADDRESS
CITY STATE ZIP CODE
REMITTANCE ADDRESS
CITY STATE ZIP CODE
REMITTANCE ADDRESS
CITY STATE ZIP CODE
REMITTANCE ADDRESS
CITY STATE ZIP CODE
Additional Contact Information Use the fields below to provide additional Authorized Representatives for the Payee if applicable.
CONTACT NAME
TELEPHONE (Include area code) EMAIL
CONTACT NAME
TELEPHONE EMAIL
CONTACT NAME
TELEPHONE EMAIL
Certification I hereby certify under penalty of perjury that the information provided on this supplemental document is true and correct.
By signing this document, I authorize the State of California to remit payment to the addresses specified on this supplemental form (STD 205) and certify that all persons identified on this form are authorized representatives of this payee. Payments remitted to any of the listed addresses may be reported on 1099 information returns to the tax liable entity identified on the accompanying Payee Data Record - STD 204.
NAME OF AUTHORIZED PAYEE REPRESENTATIVE
(Print or Type name)
TITLE E-MAIL ADDRESS
SIGNATURE
X___________________________________________
DATE TELEPHONE (Include area code)
Print Form Reset Form
California Correctional Training and Rehabilitation Authority (CALCTRA) Refrigeration Equipment Preventative Maintenance and Repair
IFB No. SP06062606
STATE OF CALIFORNIA – STATE CONTROLLERS OFFICE
PAYEE DATA RECORD SUPPLEMENT
Attachment 4B
STATE OF CALIFORNIA – STATE CONTROLLERS OFFICE
PAYEE DATA RECORD SUPPLEMENT
(This form is optional. Form is used to provide remittance address information if different than the mailing address on the STD 204 – Payee Data Record.
Use this form to provide additional remittance addresses and additional Authorized Representatives of the Payee not identified on the STD 204.)
GENERAL INSTRUCTIONS
Type or print the information on the Payee Data Record Supplement, STD 205. Sign, date, and return to the state agency/department with a completed STD 204. Prompt return of the fully completed forms will prevent delays when processing payments.
Purpose – Completion of this form (STD 205) is optional. Payees may use this form to provide remittance addresses or contact information in addition to the 1099 information return mailing address provided on the STD 204. This form shall only be used in conjunction with the STD 204, and will not be accepted without a STD 204.
Please note: The State of California Government will issue 1099 information returns to the mailing address provided on the most recently dated form STD 204 validated by the Payee. Addresses provided on this form (STD 205) will be used for remittance purposes only. If the payee would like to update the address for receiving 1099 information returns, please complete the STD 204.
Payee Information: The Payee’s Tax ID number (TIN) and Name (including any Business, DBA, or Disregarded LLC names) are required. This information is subject to TIN matching via the IRS database for validation. Payee Information provided in this section must clearly match the STD 204. Any discrepancies may result in delays of payment, up to and including denial of the request.
Name – Enter the name of the Payee. The name provided shall be the tax liable party and is subject to IRS TIN matching (when applicable).
Business Name – Enter the business name, DBA name, trade or fictitious name, or disregarded LLC name.
Tax ID Number-The State of California requires that all parties entering into business transactions that may lead to payment(s) from the state provide their Taxpayer Identification Number (TIN). The TIN is required by R&TC sections 18646 and 18661 to facilitate tax compliance enforcement activities and preparation of Form 1099 and other information returns as required by the IRC section 6109(a) and R&TC section 18662 and its regulations.
Additional Remittance Address Information - Enter the…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .