Solicitation Package.pdf

Solicitation # 19J01023Q0009

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

1. REQUISITION NUMBER

PR11299923

2. CONTRACT NO.

3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

5. SOLICITATION NUMBER

19J01023Q0009

6. SOLICITATION ISSUE DATE

January 5, 2023

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

Rula Zabaneh

b. TELEPHONE NUMBER(No collect calls)

(962) 6 590-6060

8. OFFER DUE DATE/

February 8, 2023 at 16:00 Local Time

9. ISSUED BY CODE 10. THIS ACQUISITION IS UNRESTRICTED OR SET ASIDE:____ % FOR:

General Services Office

American Embassy

SMALL BUSINESS WOMEN-OWNED SMALL BUSINESS

P.O. Box 354

HUBZONE SMALL

BUSINESS

(WOSB) ELLIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM NAICS:

Amman, Jordan

Tel: (962) 6 590-6060

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

EDWOSB

8 (A) SIZE STANDARD:

11. DELIVERY FOR FOB DESTINAT-

TION UNLESS BLOCK IS

MARKED

SEE SCHEDULE

12. DISCOUNT TERMS 13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

Amman, Jordan

17a. CONTRACTOR/

OFFERER

TELEPHONE NO.

CODE FACILITY

CODE

18a. PAYMENT WILL BE MADE BY

Financial Management Office (FMO)

American Embassy

P. O. Box 354

Amman –Jordan

E-mail: AmmanBilling@state.gov

Billing terms: Payment will be made within 30 days after receiving the services with a proper invoice.

Invoices to be sent to FMO via Email

CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

JOD

24.

AMOUNT JOD

Delivery and Installation of Metal Storage Shelving, cantilevers, and Storage

Cages for ground floor and second floor as per attached Scope of Work (SOW)

Lump Sum

25. ACCOUNTING AND APPROPRIATION DATA

26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a.SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b.CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN __1__

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER ALL

ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED HEREIN.

29. AWARD OF CONTRACT: REF. _________________ OFFER DATED

____________. YOUR OFFER ON SOLICITATION (BLOCK 5), INCLUDING ANY

ADDITIONS OR CHANGES WHICH ARE SET FORTH HEREIN, IS ACCEPTED AS TO

ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or print)

30c. DATE SIGNED

31b. NAME OF CONTRACTING OFFICER (Type or print)

Christophe Triplett

31c. DATE SIGNED mailto:AmmanBilling@state.gov

TABLE OF CONTENTS

SECTION 1 - THE SCHEDULE

• SF 1449 cover sheet

• Continuation To SF-1449, RFQ Number 19J01023Q0009, Prices, Block 23

• Continuation To SF-1449, RFQ Number 19J01023Q0009 , Schedule Of

Supplies/Services, Block 20 Description/Specifications/Work Statement

• Attachment 1 to Description/Specifications/Performance Work Statement, Government

Furnished Property

SECTION 2 - CONTRACT CLAUSES

• Contract Clauses

• Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

SECTION 3 - SOLICITATION PROVISIONS

• Solicitation Provisions

• Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in

Part 12

SECTION 4 - EVALUATION FACTORS

• Evaluation Factors

• Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in Part

SECTION 5 - REPRESENTATIONS AND CERTIFICATIONS

• Offeror Representations and Certifications

• Addendum to Offeror Representations and Certifications - FAR and DOSAR Provisions not Prescribed in Part 12

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-1449

RFQ NUMBER 19J01023Q0009

PRICES, BLOCK 23

I. PERFORMANCE WORK STATEMENT

A. The purpose of this firm fixed price purchase order is to for delivery and installation of metal storage shelving and storage cages in accordance with Scope of Work.

II. PRICING

A. This is a firm fixed price purchase order payable entirely in Jordanian Dinars (JOD). Prices for all Contract Line Items (CLIN). No additional sums will be payable for any escalation in the cost of materials, equipment or labor, or because of the contractor's failure to properly estimate or accurately predict the cost or difficulty of achieving the results required. The contract price will not be adjusted due to fluctuations in currency exchange rates.

B. The price below includes all costs associated with delivery and installation of metal storage shelving and storage cages, including materials, labor, insurance (see FAR 52.228-4 and 52.228-

5), overhead, profit and GST (if applicable). The price listed below shall include DBA (Defense

Base Act) insurance and no additional sums will be payable for any failure to properly estimate or accurately predict the cost or difficulty of achieving the results required. After award, the contractor will be required to submit evidence obtaining the required insurances.

III. VALUE ADDED TAX

VALUE ADDED TAX. Value Added Tax (VAT) is not applicable to this contract and shall not be included in the CLIN rates or Invoices because the U.S. Embassy has a tax exemption certificate from the host government.

Line

Item

Description Quantity Unit Unit

Price

Total Price (JOD)

Delivery and installation of metal storage shelving, cantilevers, and storage cages – Ground floor

Lump

Sum

Delivery and installation of metal storage shelving, cantilevers, and storage cages – 2nd floor

Lump

Sum

Total Price in Jordanian Dinar

CONTINUATION TO SF-1449,

RFQ NUMBER 19J01023Q0009

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

Attachment 1

Statement of Work

Metal Storage Shelving and Storage Cages

1. Scope of Services

The vendor shall:

a. Delivery and installation of Metal Storage Shelving and Storage Cages as per attached OBO STANDARD SPECIFICATIONS SECTION 105613 and the attached exhibit 1 (Ground Floor Drawing) and exhibit 2 (Second Floor Drawing).

b. Provide the necessary quality certificates.

The price to be quoted shall include all labor, materials, overhead, profit, and transportation necessary to deliver the required items to the warehouse.

All prices should be quoted in Jordanian Dinars.

The U.S. government will provide the supplier with customs exemption letter if all the quantities are available in the customs bonded station. The customs exemption letter can be issued around sixteen working days after receipt of the proforma invoice.

2. Delivery Location and Time

• The vendor shall deliver and install Metal Storage Shelving and the storage cages at the embassy offsite warehouse within 60 days following the award in accordance with the attached specification section 105613 Metal Storage Shelving

• Delivery, installation and testing of the storage racks, cantilevers, and the storage cages will be executed between the hours of 8:00 am and 4:00 pm during the working week (Sunday - Thursday).

3. Storage

NIA

4. Quality of Work

• Metal Storage Shelving and Storage Cages shall be supplied, installed, and tested as per the attached specifications section 105613.

• The Embassy maintains the right to reject the items supplied and/or the installation work that does not meet the specifications in the statement of work. Such work will not be paid upon receipt by the Embassy.

5. Installation

• The vendor is fully responsible for installation, inspection and maintenance as per Attached Specs Section 105613.

SECTION 105613 -METAL STORAGE SHELVING

PART I-GENERAL

1.1 SUMMARY

A. This Section includes the following:

1. Four-post metal storage shelving (FPMS) and accessories.

2. Cantilever racks and accessories.

3. Pallet Racks.

4. Storage cabinets.

5. Plan file stands.

B. Related Sections include the following:

1. Division 10 Section on mobile storage shelving.

2. Division 10 Section on safety storage cabinets.

3. Division 12 Section on work benches.

4. [Division 13 Section on modular mezzanines.]

5. Section 271116 "Communications Cabinets and Frames" for racks used with telecommunications equipment.

6. Section 280508 "Common Work Results for Technical Security Systems

(TSS)" for racks used with TSS.

1.2 PERFORMANCE REQUIREMENTS

A. [Delegated Design: For shelving units higher than 4500 mm (15 feet}, design metal storage shelving, including comprehensive engineering analysis by a qualified professional engineer, using performance requirements and design criteria indicated.]

B. [Seismic Performance: Metal storage shelving shall withstand the effects of earthquake motions determined according to [ASCE/SEI 7] and conform to seismic design requirements of the OBO Building Code (International Building Code as amended by

OBO).

1. Seismic Component Importance Factor: 1.0.]

C. Structural Performance for Post-and-Shelf Metal Storage Shelving: Provide metal storage shelving capable of withstanding the loads indicated when tested according to

MH 28.1, "Specification for the Design, Testing, Utilization and Application of

Industrial Grade Steel Shelving."

D. Structural Performance for Post-and-Beam Metal Storage Shelving: Capable of withstanding the loads indicated according to MH 28.2.

1.3 SUBMITTALS

A. Product Data: For each type of product indicated. Include rated capacities, construction details, material descriptions, dimensions of individual components and profiles, and finishes for metal storage shelving.

B. Shop Drawings: For racks and other customized metal storage shelving. Include plans, aisle widths, elevations, sections, details, and attachments to other work. Include installation details of connectors, lateral bracing, and special bracing.

C. Samples for Verification: For the following components, of size indicated below.

I. Posts: 300 mm long.

2. Shelves: Full size, but not more than 600 mm wide by 300 mm deep.

3. Connectors: Full size.

4. Shelf Labels: Full size.

D. [Delegated-Design Submittal: For metal storage shelving indicated to comply with performance requirements, including analysis data signed and sealed by the qualified professional engineer responsible for their preparation.

1. Design Calculations: Calculate requirements for seismic restraints.]

E. Qualification Data:

1. Installer.

2. [Professional engineer in accordance with ASCE/SEI 7].

3. [Seismic Qualification Certificates: For metal storage shelving, accessories, and components, from manufacturer.]

F. Product Schedule: For metal storage shelving. Use same designations indicated on

Drawings.

G. Product Certificates: For each type of metal storage shelving from manufacturer.

H. Maintenance Data: For metal storage shelving to include in maintenance manuals.

1.4 QUALITY ASSURANCE

A. Source Limitations: Obtain metal storage shelving through one source from a single vendor.

B. Installer Qualifications: Manufacturer's authorized representative who is trained and approved for installation of units required for this Project.

C. Vendor's Qualifications for Rack Design: Minimum five years’ experience with similar warehouse applications. Vendors shall review rack layout and accessories to confirm and maximize rack design and storage capacity.

<REFER TO THE OBO BUILDING CODE REQUIREMENTS REGARDING

ENGINEERING EXPERTISE BELOW REIATED TO SEISMIC FORCES>

D. [Engineer Responsibility: A professional engineer shall design the seismic restraints for shelves, cabinets and files. Engineer shall have experience in design of seismic restraints for similar projects using similar products, equipment and installation design.

Manufacturer may submit evidence that seismic restraints systems and installation requirements have been written and reviewed by an engineer on staff.]

E. [Product Options: Drawings indicate size, profiles, and dimensional requirements of metal storage shelving and are based on the specific system indicated.

1. Do not modify structural and operational performance.]

F. Preinstallation Conference: Conduct conference at [Project site].

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver metal storage shelving palleted, wrapped, or crated to provide protection during transit and Project-site storage.

1.6 PROJECT CONDITIONS

A. Environmental Limitations: Do not deliver or install metal storage shelving until spaces are enclosed and weatherproof, wet work in spaces is completed and dry, and ambient temperature is being maintained at the levels indicated for Project when occupied for its intended use.

1.7 COORDINATION

A. Coordinate sizes and locations of blocking and backing required for installation of metal storage shelving attached to partition assemblies.

B. Coordinate locations and installation of metal storage shelving that may interfere with ceiling systems including lighting, HVAC, and sprinklers.

1.8 EXTRA MATERIALS

A. Furnish extra materials described below, before installation begins, that match products installed and that are packaged with protective covering for storage and identified with labels describing contents.

1. Shelves: Full-size units equal to 15 percent of amount installed for each type indicated, but no fewer than 10 shelves.

2. Shelf-to-Post Connectors: Full-size units equal to 15 percent of amount installed for each type indicated, but no fewer than 10 connectors.

3. Shelf Labels: Equal to 25 percent of amount installed for each type indicated.

4. Plan Racks: Provide additional 24 plan rack clamps for drawings.

PART 2- PRODUCTS

2.1 MATERIALS

A. Hot-Rolled Steel Sheet: ASTM A 1011/A 101lM, Commercial Steel (CS), Type B; free of scale, pitting, or surface defects; pickled and oiled.

B. Cold-Rolled Steel Sheet: ASTM A 1008/A 1008M. Commercial Steel (CS), Type B.

C. Steel Tubing: ASTM A 513, Type 2.

D. Stainless-Steel Wire: ASTM A 580/A 580M, Type 304.

E. Floor Anchors: Galvanized-steel, power-actuated fasteners. Provide number per unit recommended by manufacturer unless additional anchors are indicated in calculations.

F. Wall Anchors: Manufacturer's standard, galvanized-steel anchors designed to secure metal storage shelving to adjacent wall. The contractor is responsible for providing and installing the correct number of anchors per shelving unit for each shelving unit to secure the shelving units to walls based on engineering calculations.

2.2 FOUR-POST METAL STORAGE SHELVING (FPMS)

A. Four-Post Metal Storage Shelving: This shelving type may be identified in some instances as simply "Steel Shelves" (e.g., at Shop spaces). Factory-formed, field-assembled, freestanding, post-and-shelf metal storage shelving system; designed for shelves to span between and be supported by corner posts, with shelves adjustable over the entire height of shelving unit. Fabricate initial shelving unit with a post at each corner. Fabricate additional shelving units similarly, so each unit is independent. Provide fixed top and bottom shelves, adjustable intermediate shelves, and accessories indicated. Provide open shelving except where indicated otherwise.

1. Available Manufacturers: Manufacturers providing four-post metal storage shelving include, but are not limited to:

a. Adjustable Shelving Products; a division of Karp Associates, Inc.

b. Borroughs Corporation.

c. Edsal.

d. Equipto.

e. Excalibur Shelving Systems.

f. Hallowell; Division of List Industries, Inc.

g. Hodge; a division of Durham Mfg. Co., Inc.

h. Jeter Systems Corporation.

i. Lyon Workspace Products. LLC.

j. Montel Aetnastak Inc.

k. Penco Products, Inc.

I. Richards-Wilcox, Inc.

m. Rousseau Metal Inc.

n. Safco Products; a division of LDI.

o. Schaefer Systems International, Inc.

p. Shelf Esteem Inc.

q. Spacesaver Corporation.

r. Tennsco.

s. Unicor; Federal Prison Industries, Inc.

t. Western Pacific Storage Systems.

B. Structural Performance for Four-Post Metal Storage Shelving: Provide metal storage shelving capable of withstanding the loads indicated when tested according to MH 28.1, "Specification for the Design, Testing, Utilization and Application of Industrial Grade

Steel Shelving."

1. Load-Carrying Capacity per Shelf: 300 kg (700 lb) for typically loaded shelves, 680 kg (1500 lb) for heavily loaded shelves (e.g., for paint storage).

C. Construction

1. Posts: Fabricated from hot rolled steel in manufacturer's standard shape; with perforations at 40 mm o.c. (1-1/2 inches o.c.) to receive shelf-to-post connectors.

a. Add-On Shelf Posts: Fabricated from hot-rolled steel, T-shaped; perforated to match main posts and same thickness.

b. Post Base: Adjustable steel foot plate, drilled for mechanical attachment to floor.

2. Bracing: Manufacturer's standard double diagonal cross bracing at back and ends, as required for stability and load-carrying capacity.

3. Solid-Type Shelves: Fabricated from steel sheet.

a. Steel-Sheet Thickness, Nominal: Of thickness required for load-carrying capacity per shelf.

4. Framed-Type Wire Shelves: Steel in locations with low-level corrosion or pollution risk, or stainless steel in locations with moderate or extreme corrosion or pollution risk.

5. Shelf-to-Post Connectors: Manufacturer's standard connectors.

6. Base: Open, with exposed post legs.

7. Steel Finish: Baked enamel or powder coat.

a. Color and Gloss: As selected by Project Director/COR from manufacturer's full range.

D. Accessories:

a. Label Holders: Clear plastic, designed to clip onto front edge of shelf.

b. Drawers: Where indicated or scheduled.

c. Doors: Where indicated or scheduled.

d. Storage Basket: Where indicated, Edge-of-shelf-mounted wire basket, fabricated from same material and with same finish as shelves.

e. [Rolling Ladders: For FPMS with 3600 mm (144 inches) height.]

2.3 CANTILEVER RACKS

A. Cantilever Rack Metal Storage Shelving - Warehouse: Factory-formed, field-assembled, cantilever rack metal storage shelving system shall be double sided upright. Single sided sections shall have similar design requirements.

1. Available Manufacturers: Manufacturers providing cantilever rack metal storage

a. Lyon Metal Products, Inc.

b. Redirack Storage Systems

c. Steel King Industries, Inc.

<REFER TO TABLES AFTER THE END OF THIS SECTION FOR

GUIDANCE ON LOAD-CAPACITY BELOW.>

2. Load-Carrying Capacity of Upright: [XX kg (XX lbs)].

3. Uprights:

a. Provide three uprights per 2400 mm length of initial floor run of shelving units, two additional uprights per each additional 2400 mm length of floor run.

4. Columns: Factory-welded to base.

5. Arms:

a. Cantilever arms shall be 1200 mm (48 inches) in length, unless indicated otherwise in specific locations.

b. Adjustable vertically in 75 mm (3 inch) increments.

c. Arm Configuration: Straight arms, except where indicated or scheduled as sloped (angled) arms. Arms shall be steel I beam construction with fastening points for grate decking.

d. Capacity: 700 kg (1,540 pounds) minimum.

6. Bracing: Manufacturer's standard between uprights.

7. Decking: Steel grating, self-supporting, of minimum of 1400kg (3080 pounds) weight capacity. Secure grating to cantilevered arms using bolts or other manufacturer recommended fasteners. Openings in grating shall not exceed 25mm by 100 mm (1 inch by 4 inches), with smaller opening pattern preferred if available.

8. Nominal Height of System:

<HEIGHTS BELOW IN WAREHOUSE FOR LOW-BAY AND HIGH

BAY ARE REPRESENTATIVE VALUES, AND OTHER HEIGHTS

IN THOSE RANGES MAY BE USED.>

a. Expendable Storage: Where cantilevered racks are scheduled for expendable storage, provide 1800 mm (6 ft) high units.

b. [Low-Bay: [3650 mm (12 ft).]

c. [High-Bay: [5500 mm (18 ft).] [6700 mm (22 ft)] to top of deck.]

9. Accessories:

<FOR RACKS IN SHOP SPACES BELOW, REFER ALSO TO

"SHOP SIZING SUPPLEMENT" IN REFERENCE DOCUMENTS OF

THE OBO DESIGN STANDARDS; FOR THOSE SPACES>

B. Cantilever Rack Metal Storage Shelving - Shops: Factory-formed, field-assembled, light-duty cantilever rack metal storage shelving system.

1. Load-Carrying Capacity per Arm: 113 kg (250 lbs.).

2. Material: 2.75 mm (12-gauge) steel with electrostatically-coated powder paint finish.

3. Arm Length: 300 mm (12 inches).

4. Arm Type: Single with lip; adjustable on 38 mm (1-1/2 inch) increments.

5. Lip: 63 mm (2-1/2 inches).

2.4 PALLET RACKS

A. Pallet Rack Metal Storage Shelving: Factory-formed, field-assembled, metal rack storage shelving system consisting of two each, two-post cross-braced vertical units, connected by horizontal load-carrying beams front and rear.

1. Available Manufacturers: Manufacturers providing pallet rack metal storage

a. Lyon Metal Products, Inc.

b. Redirack Storage Systems

c. Steel King Industries, Inc.

<THE CAPACITY BELOW IS BASED UPON FOUR CROSS BEAM LEVELS>

2. Load-Carrying Capacity of Vertical Uprights: [12,700 kg (28,000 lb.)].

3. Uprights: Bolt to floor front and rear..

a. Provide two uprights for first section, one upright for each additional section, per row of racking.

b. Tear drop fastening system adjustable at 50 mm (2 inches) o.c.

4. Beams: Rolled form steel with integrated step for decking, and three or four attaching stud pins with safety lock mechanism.

<ABOUT 90 PERCENT OF RACKS SHOULD USE 2400 MM OR 2700

MM BEAM LENGTH BELOW>

5. Beam Length: [2400 mm (8 ft)] (2700 mm (9 ft)] [3000 mm (10 ft)] [3600 mm (12 ft)].

6. Beam Capacity: (1400 kg (3000 lbs)] [2000 kg (4500 lbs)].

7. Anti-Ram Guards: Provide at rack end posts.

8. Decking: Waterfall type, hooking over front and rear of horizontal support beams. Provide "U" or inverted "U" channels in lieu of flared-end channels for support of decking. One "U" channel support per linear foot of decking.

9. Nominal Height of System:

<HEIGHTS BELOW FOR LOW-BAY AND HIGH BAY ARE

REPRESENTATIVE VALUES, AND OTHER HEIGHTS IN THOSE

RANGES MAY BE USED.>

a. [Low Bay: (36S0 mm (12 ft)] [4500 mm (15 ft)] to top of deck.]

b. [High Bay: [5500 mm (18 ft)] [6700 mm (22 ft)] to top of deck.]

10. Stack Depth: 1200 mm (48 inches) ·, unless indicated otherwise in specific locations.

11. Accessories:

2.5 STORAGE CABINETS

A. Light Duty Cabinets: Steel with baked enamel finish and shall include a recessed handle with build-in lock and two keys; three hinges per door and three-point latching.

Shelves shall be adjustable at 50 mm (2-inch) intervals and shall be capable to support a minimum 180 kg (400 pounds) per shelf. Doors shall open a full 180 degrees.

1. Available Manufacturers: Manufacturers providing cabinets include, but are not limited to:

a. Lyon Metal Products Inc.

b. Penco Products Inc.

c. Richards-Wilcox. Inc.

B. General: Provide cabinets where indicated or scheduled.

I. Max. Unit Width: 900 mm (36 inches).

C. Colors: Selected by Project Director/COR from manufacturers standard colors.

2.6 PLAN FILE AND STANDS

A. General: Self-contained stand that can hold up to 1200 prints.

1. Basis of Design: Safco Products Company, Model 5026.

B. Stand: Adjustable from 1075 mm (43 inches) to 1525 mm (61 inches) for sheets up to 1375

(54 inches) long.

C. Base: Extends 675 mm (27 inches) to 925 mm (37 inches) wide to accommodate various size drawings.

D. Steel construction with four ball-bearing swivel casters, with 2 casters that lock; minimum of 12 pivot brackets per rack.

1. Color: [Tropic Sand.]

E. Hanging Clamps: Extruded aluminum clamps with polished chrome-plated cast alloy wing knobs. Provide 12 clamps to fit on the pivot brackets in lengths to accommodate prints up to 900 mm (36 inches) wide.

2.7 FABRICATION

A. Shop Assembly: Preassemble items in shop to greatest extent possible to minimize field splicing and assembly. Use connections that maintain structural value of joined pieces.

Clearly mark units for reassembly and coordinated installation.

B. Fabricate metal storage shelving square and rigid with posts plumb and true, and shelves flat and free of dents or distortion. Fabricate connections to form a rigid structure, free of buckling and warping.

C. Shear and punch metals cleanly and accurately. Remove burrs.

D. Form edges and corners free of sharp edges or rough areas. Fold back and crimp exposed edges of unsupported sheet metal to form a 13-mm- wide hem on the concealed side; ease edges of metal plate to radius of approximately 1.0 mm.

E. Form metal in maximum lengths to minimize joints. Form bent-metal corners to smallest radius possible without causing grain separation or otherwise impairing work.

F. Weld corners and seams continuously to comply with referenced AWS standard and the following:

1. Use materials and methods that minimize distortion and develop strength and corrosion resistance of base metals.

2. Obtain fusion without undercut or overlap.

3. Remove welding flux immediately.

4. At exposed connections, finish exposed welds and surfaces smooth and blended so no roughness shows after finishing and contour of welded surface matches that of adjacent surface.

5. Weld before finishing components to greatest extent possible. Remove weld spatter and welding oxides from exposed surfaces by descaling or grinding.

G. Build in straps, plates, brackets, and other reinforcements as needed to support shelf loading.

H. Cut, reinforce, drill, and tap metal fabrications to receive hardware, fasteners, and similar items.

I. Form exposed work true to line and level with accurate angles and surfaces and straight sharp edges.

J. Form exposed connections with hairline joints, flush and smooth, using concealed fasteners where possible. Locate joints where least conspicuous.

2.8 GENERAL FINISHES REQUIREMENTS

A. Comply with NAAMM's "Metal Finishes Manual for Architectural and Metal

Products" for recommendations for applying and designating finishes.

B. Appearance of Finished Work: Noticeable variations in same piece are not acceptable.

Variations in appearance of adjoining components are acceptable if they are within the range of approved Samples and are assembled or installed to minimize contrast.

2.9 STEEL FINISHES

A. Surface Preparation: Remove mill scale and rust, if present, from uncoated steel, complying with SSPC-SP 5/NACE No. 1, "White Metal Blast Cleaning," or SSPC-SP

8, "Pickling."

B. Baked-Enamel or Powder-Coat Finish: Manufacturer's standard baked-on finish consisting of prime coat and thermosetting topcoat. Comply with coating manufacturer's written instructions for cleaning, pretreatment, application, and minimum dry thickness.

1. Color and Gloss: As selected by Project Director/COR from manufacturer's full range.

PART 3 - EXECUTION

3.1 EXAMINATION

A. Examine areas_ with Installer present, for compliance with requirements for installation tolerances and other conditions affecting performance of work.

B. Examine floors for suitable conditions where metal storage shelving will be installed.

C. Examine walls to which metal storage shelving will be attached for properly located blocking, grounds, or other solid backing for attachment of support fasteners.

D. Proceed with installation only after unsatisfactory conditions have been corrected.

3.2 PREPARATION

A. Vacuum finished floor over which metal storage shelving is to be installed.

3.3 INSTALLATION

A. Install metal storage shelving level, plumb, square, rigid, and true, and within erection tolerances specified.

1. Anchor shelving units to floor with suitable fasteners through foot plate. Shim foot plate as required to achieve level and plumb installation.

2. Connect side-to-side and back-to-back shelving units together at corners posts with support ties.

3. Install shelves in each shelving unit at spacing indicated on Drawings or, if not indicated, at equal spacing.

a. Four-Post Metal Storage Shelving: Install four clips, one at each post, for support of each shelf; with clips fully engaged in post perforations.

4. [Brace shelving units as required for seismic forces.]

B. Pallet Racks:

1. Place 150 mm (6 inches) from wall or 300 mm (12 inches) apart if back-to-back, using Manufacturer's standard bracing between rack and walls, and between back-to-back units.

C. Accessories:

1. Shelf Labels: Install one shelf label at each shelf, centered within each shelving unit.

2. Back Ledges: Install one back ledge per shelf.

3. Side Ledges: Install side ledges at each side of each shelf.

3.4 ADJUSTING AND CLEANING

A. Verify that shelves and shelf-to-post connectors adjust easily and properly.

B. On completion of installation, clean exposed surfaces as recommended by manufacturer.

C. Touch up marred finishes or replace metal storage shelving that cannot be restored to factory finished appearance. Use only materials and procedures recommended or furnished by metal storage shelving manufacturer.

D. Replace metal storage shelving that has been damaged or has deteriorated beyond successful repair by finish touchup or similar minor repair procedures.

3.5 SCHEDULE

A. For the warehouse and shop buildings, provide shelving in accordance with Table 3.7 below as applicable to the spaces included in the building(s). Refer to Drawings or other contract documents for location of shelving in other buildings.

1. Quantities: The table indicates quantities in the following ways:

a. Standard Quantities: Where specific quantity is identified.

b. Mix: Percentage distribution of types/sizes; quantities adjusted by actual size of space based upon capacity using suitable aisle widths.

c. Type Only: Where type/size are indicated without quantity, adjust quantity based upon capacity using suitable aisle widths.

TABLE 3.7

SHELVING DISTRIBUTION- WAREHOUSE

SPACE SHELVING NOTES

Receiving Area 9.6 m (32 LF) along floor of Canti lever-straight

Battery Storage and Charging None

Laundry Room (I) 450-mm D cabinet

Storage - Welcome Kits (80%) 600-mm D open FPMS, (20%) 600-mm D cabinets

For non-expendable kits;

expendable kits are stored with bulk storage

Janitor's Closet (I) 750-mm W x 450-mm D open

FPMS

Storage - CMR (75%) Pallet, (25%) Cantilever

Straight

Storage - Arts in Emb (AIE) Project-Specific Location in WHE may vary

Storage - Archives 18

D open FPMS

Storage - Expendable supplies (Of (20%) 300-mm D open FPMS.

fice) (20%) 450-mm D open FPMS, (20%) 450-mm D Door/Drawer

FMPS, (40%) 600-mm D open

FPMS

Storage - Remote Emergency Med 600-mm D open FPMS ical Equipment

Storage - Environmental Security 1 wall 750-mm D open FPMS

Equipment and Supplies

Storage - Agency Controlled Ac 600-mm D FPMS cess

Residential Storage (Bulk) (75%) Pallet, (25%) Cantilever

Straight

Office Storage (Bulk) (75%) Pallet, (25%) Cantilever

Straight

Storage - for disposaVresale (75%) Pallet, (25%) Cantilever

Straight

Event Storage Non-Bulk Storage Area (secondary Primary location in Bulk Storage location): 900-mm W x 600-mm D area cabinets

Storage - Expendable Welcome

Kits

(80%) 600-mm D open FPMS, (20%) 600-mm D cabinets

END OF SECTION 105613

SENSITIVE BUT UNCLASSIFIED

<NOTE: THE FOLLOWING TABLES FROM L.K. GOODWIN CO.

ILLUSTRATE CAPACITY REQUIREMENTS FOR WAREHOUSE

CANTILEVER RACKSD DEPENDING UPON HEIGHT AND

CONFIGURATION. VALUES FOR OTHER MANUFACTURER'S

RACKS WILL BE RELATIVELY SIMILAR.>

<THESE TABLES ARE TO ASSIST IN DEVELOPING CAPACITY

REQUIREMENTS DURING THE DEVELOPMENT OF THE

SPECIFICATIONS. THE PROJECT-SPECIFIC VALUES REFLECTING

THE DESIGN SHOUW BE INCORPORATED IN ARTICLE 2.3. DO NOT

INCLUSE THESE TABLES IN THE FINAL CONSTRUCTIONS

SPECIFICATIONS>

SINGLE-SIDED UPRIGHT; 1200 MM (48 INCH) ARM

HT. OF UPRIGHT LENGTH OF BASE CAPACITY

3650 mm (12ft) 1525 mm (61 inches) 5670 kg (12,500 lb)

4500 mm (15 ft) 1525 mm (61 inches) 5580 (12,300 lb)

5500 mm (18 ft) 1525 mm (61 inches) 5400 kg (11,900 lb)

6100 mm (20 ft) 1525 mm (61 inches) 5080 kg (11,200 Jb)

DOUBLE-SIDED UPRIGHT; 1200 MM (48 INCH} ARM

HT. OF UPRIGHT

LENGTH OF BASE

CAPACITY

3650 mm (12ft)

4500 mm (15 ft)

2650 mm (106 inches)

2650 mm (106 inches)

11,340 kg (25,000 lb)

11,160 kg (24,600 lb)

5500 mm (18 ft) 2650 mm (106 inches) 10,800 kg (23,800 lb)

6100 mm (20 ft) 2650 mm (106 inches) 10,160 kg (22,400 Jb)

QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

This plan provides an effective method to promote satisfactory contractor performance. The

QASP provides a method for the Contracting Officer's Representative (COR) to monitor

Contractor performance, advise the Contractor of unsatisfactory performance, and notify the

Contracting Officer of continued unsatisfactory performance. The Contractor, not the

Government, is responsible for management and quality control to meet the terms of the contract.

The role of the Government is to monitor quality to ensure that contract standards are achieved.

Performance Objective Scope of Work

Paragraphs Performance Threshold

Services.

Performs all delivery and installation of metal storage shelving and storage cages services set forth in the scope of work.

1 thru part 3

All required services are performed and no more than one

(1) customer complaint is received per month.

[1. SURVEILLANCE. The COR will receive and document all complaints from Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

2. STANDARD. The performance standard is that the Government receives no more than one

(1) [Note to Contracting Officer: Insert other number if desired] customer complaint per month.

The COR shall notify the Contracting Officer of the complaints so that the Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.212.4, Contract Terms and

Conditions-Commercial Items (May 2001), if any of the services exceed the standard.

3. PROCEDURES.

(a) If any Government personnel observe unacceptable services, either incomplete work or required services not being performed they should immediately contact the COR.

(b) The COR will complete appropriate documentation to record the complaint.

(c) If the COR determines the complaint is invalid, the COR will advise the complainant. The COR will retain the annotated copy of the written complaint for his/her files.

(d) If the COR determines the complaint is valid, the COR will inform the

Contractor and give the Contractor additional time to correct the defect, if additional time is available. The COR shall determine how much time is reasonable.

(e) The COR shall, as a minimum, orally notify the Contractor of any valid complaints.

(f) If the Contractor disagrees with the complaint after investigation of the site and challenges the validity of the complaint, the Contractor will notify the COR. The COR will review the matter to determine the validity of the complaint.

(g) The COR will consider complaints as resolved unless notified otherwise by the complainant.

(h) Repeat customer complaints are not permitted for any services. If a repeat customer complaint is received for the same deficiency during the service period, the

COR will contact the Contracting Officer for appropriate action under the Inspection clause.]

SECTION 2 - CONTRACT CLAUSES

52.212-4 CONTRACT TERMS AND CONDITIONS – COMMERCIAL ITEMS

(NOV 2021) IS INCORPORATED BY REFERENCE. (SEE SF-1449,

BLOCK 27A)

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT

STATUTES OR EXECUTIVE ORDERS—COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (OCT 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or

Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further

Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services

Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video

Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (NOV

2015).

(5) 52.233-3, Protest After Award (AUG 1996) ( 31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws

108-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the

Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN

2020), with Alternate I (NOV 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 2402).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV

2021) ( 41 U.S.C. 3509)).

https://www.acquisition.gov/far/part-52#FAR_52_203_19 https://www.acquisition.gov/far/part-52#FAR_52_204_23 https://www.acquisition.gov/far/part-52#FAR_52_204_25 https://www.acquisition.gov/far/part-52#FAR_52_209_10 https://www.acquisition.gov/far/part-52#FAR_52_233_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_233_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and

Reinvestment Act of 2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract

Awards (JUN 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (5) [Reserved].

__ (6) 52.204-14, Service Contract Reporting Requirements (OCT 2016) (Pub. L. 111-

117, section 743 of Div. C).

__ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery

Contracts (OCT 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with

Contractors Debarred, Suspended, or Proposed for Debarment. (NOV

2021) ( 31 U.S.C. 6101 note).

__ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility

Matters (OCT 2018) ( 41 U.S.C. 2313).

__ (10) [Reserved].

__ (11) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (SEP

2021) ( 15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small

Business Concerns (SEP 2021) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (13) [Reserved]

__ (14)

(i) 52.219-6, Notice of Total Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ (15)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT

2018) ( 15 U.S.C. 637(d)(2) and (3)).

__ (17)

(i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) ( 15 U.S.C. 637(d)(4)).

https://www.acquisition.gov/far/part-52#FAR_52_203_15 https://www.acquisition.gov/far/part-52#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_204_14 https://www.acquisition.gov/far/part-52#FAR_52_204_15 https://www.acquisition.gov/far/part-52#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_6 https://www.acquisition.gov/far/part-52#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_7 https://www.acquisition.gov/far/part-52#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_9

__ (ii) Alternate I (NOV 2016) of 52.219-9.

__ (iii) Alternate II (NOV 2016) of 52.219-9.

__ (iv) Alternate III (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2021) of 52.219-9.

__ (18)

(i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of 52.219-13.

__ (19) 52.219-14, Limitations on Subcontracting (SEP 2021) ( 15 U.S.C. 637s).

__ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (SEP

2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-

Aside (SEP 2021) ( 15 U.S.C. 657f).

__ (22)

(i) 52.219-28, Post Award Small Business Program Rerepresentation (SEP

2021) ( 15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (SEP 2021) ( 15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned

Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP

2021) ( 15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR

2020) ( 15 U.S.C. 644(r)).

__ (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) ( 15U.S.C. 637(a)(17)).

__ (27) 52.222-3, Convict Labor (JUN 2003) (E.O.11755).

_X_ (28) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (JAN

2022) (E.O.13126).

__ (29) 52.222-21, Prohibition of Segregated Facilities (APR 2015).

__ (30)

(i) 52.222-26, Equal Opportunity (SEP 2016) (E.O.11246).

https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_9 https://www.acquisition.gov/far/part-52#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_13 https://www.acquisition.gov/far/part-52#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_28 https://www.acquisition.gov/far/part-52#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/part-52#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/part-52#FAR_52_222_3 https://www.acquisition.gov/far/part-52#FAR_52_222_19 https://www.acquisition.gov/far/part-52#FAR_52_222_21 https://www.acquisition.gov/far/part-52#FAR_52_222_26

__ (ii) Alternate I (FEB 1999) of 52.222-26.

__ (31)

(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

__ (32)

(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of 52.222-36.

__ (33) 52.222-37, Employment Reports on Veterans (JUN 2020) ( 38 U.S.C. 4212).

__ (34) 52.222-40, Notification of Employee Rights Under the National Labor

Relations Act (DEC 2010) (E.O. 13496).

_X_ (35)

(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) ( 22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (MAR 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O.

13627).

__ (36) 52.222-54, Employment Eligibility Verification (MAY 2022) (Executive

Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in

FAR 22.1803.)

__ (37)

(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items

(May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration

Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40)

(i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (JUN 2014) (E.O.s

13423 and 13514).

https://www.acquisition.gov/far/part-52#FAR_52_222_26 https://www.acquisition.gov/far/part-52#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_35 https://www.acquisition.gov/far/part-52#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_36 https://www.acquisition.gov/far/part-52#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/part-52#FAR_52_222_40 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_222_54 https://www.acquisition.gov/far/part-22#FAR_22_1803 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_11 https://www.acquisition.gov/far/part-52#FAR_52_223_12 https://www.acquisition.gov/far/part-52#FAR_52_223_13

__ (ii) Alternate I (OCT 2015) of 52.223-13.

__ (41)

(i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (JUN 2014) (E.O.s 13423 and

13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (42) 52.223-15, Energy Efficiency in Energy-Consuming Products (MAY

2020) ( 42 U.S.C. 8259b).

__ (43)

(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT

2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-16.

_X_ (44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While

Driving (JUN 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

__ (46) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (47)

(i) 52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (JAN 2017) of 52.224-3.

__ (48)

(i) 52.225-1, Buy American-Supplies (OCT 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (OCT 2022) of 52.225-1.

__ (49)

(i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (OCT

2022) ( 41 U.S.C.chapter83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19

U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I (JAN 2021) of 52.225-3.

__ (iii) Alternate II (JAN 2021) of 52.225-3.

__ (iv) Alternate III (JAN 2021) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

https://www.acquisition.gov/far/part-52#FAR_52_223_13 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_14 https://www.acquisition.gov/far/part-52#FAR_52_223_15 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_16 https://www.acquisition.gov/far/part-52#FAR_52_223_18 https://www.acquisition.gov/far/part-52#FAR_52_223_20 https://www.acquisition.gov/far/part-52#FAR_52_223_21 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_224_3 https://www.acquisition.gov/far/part-52#FAR_52_225_1 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_1 https://www.acquisition.gov/far/part-52#FAR_52_225_3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_3 https://www.acquisition.gov/far/part-52#FAR_52_225_3

__ (50) 52.225-5, Trade Agreements (OCT 2019) ( 19 U.S.C.