Solicitation - N0042126Q1166.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Created On:

06 May 2026, 12:44 PM Greenwich Mean Time

Section A - Solicitation/Contract Form

Test Pilot

U.S Government ~ Tax Exempt

ISSUED BY:

Name: Annie Bohmann Phone Number: 240-572-9625 Email: annie.n.bohmann.civ@us.navy.mil

VENDOR CONTACT:

DUNS:

Company POC:

Phone:

Email:

Reference Your Quote:

TECHNICAL POC:

Name:

Email:

ALTERNATE TECHNICAL POC:

Name:

Email:

PAYMENT/INVOICING ISSUES: PLEASE CONTACT COMPTROLLER BELOW.

N64142 NAWCAD

COMPTROLLER

INTERNAL ENTITLEMENTS TEAM BLDG 440 ROOM 25

47122 LILJENCRANTZ ROAD

PATUXENT RIVER, MD 20670-1549

INTERNAL ENTITLEMENTS TEAM 301-342-9586

EMAIL: PAXR_ACCT_INTERNAL_ENTITLEMENTS@NAVY.MIL

WAWF Invoicing Help & Instructions:

Visit the website at https://wawf.eb.mil/ and you can find help via the link "Vendors - Getting Started Help" under the New User section.

EARLY AND PARTIAL SHIPMENTS ARE ACCEPTABLE VENDOR - IF ELECTRONIC EQUIPMENT,

PLEASE MARK BOX/PACKAGE CONTAINING

ELECTRONIC EQUIPMENT WITH THE "DO NOT SCAN" STICKER RECEIVING DOC HOURS ARE

MONDAY THROUGH FRIDAY, 0630-1500 EST.

N0042126Q1166

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

0001 MD-500 FERRY FLIGHTS - TPS

Pricing Arrangement: Firm Fixed Price

1 Job

0002 MD-500 FLIGHT HOURS - TPS

Pricing Arrangement: Firm Fixed Price

1 Job

0003 MD-500 PILOT DAYS - TPS

Pricing Arrangement: Firm Fixed Price

1 Job

0004 MD-500 MAINTAINER DAYS - TPS

Pricing Arrangement: Firm Fixed Price

1 Job

0005 MD-500 TRAVEL COSTS - TPS

Pricing Arrangement: Firm Fixed Price

1 Job

Section C - Description/Specifications/Statement of Work Performance Based Statement of Work

For U. S. Naval Test Pilot School

USNTPS QUALITATIVE EVALUATION

1.0 Introduction: The U. S. Naval Test Pilot School (USNTPS) and other Naval Test Wing Atlantic (NTWL) Squadrons is acquiring flight demonstration flight support of its Qualitative Evaluation flight exercise.

2.0 Background: The USNTPS trains engineering flight test pilots and flight test engineers for the Department of Defense, Department of Homeland Security, and international flight test organizations. The Qualitative Evaluation (QE) Program institutionalized within the USNTPS is a major facet of the curriculum that provides a wide variety of aircraft with differing flying qualities and performance characteristics to the students. The training augments and rounds the education received in aircraft that are organic to USNTPS. Prior to participation in the QE Program at USNTPS, an inspection of the contractor's equipment, maintenance practices, and flight discipline must be completed. This inspection is conducted by USNTPS staff personnel at the contractor's place of business.

3.0 Scope:

3.1. The contractor shall provide up to 17 demonstration flight hours in an MD-500 aircraft to USNTPS student and instructor pilotsto support the QE exercise and pilot experience. The flights will be conducted during the period 05/18/2026-06/30/2026

3.2. Flight demonstrations shall take place at the U.S. Naval Test Pilot School which will require the contractor to ferry the aircraft to NAS Patuxent River, MD. The total of flight hours in paragraph 3.1. does not include the ferry time required for transporting the aircraft to and from NAS Patuxent River. Ferry time for one flight from the contactor's location to Patuxent River and a return flight to the contractor's location for each aircraft will be priced at a fixed rate. Travel expenses for the contractor pilot will be costed separately and will be in accordance with Joint Travel Regulations.

3.3. Prior to participation in the QE Program at USNTPS, an inspection of the contractor's equipment, maintenance practices, and flight discipline must be completed. This inspection is conducted by USNTPS staff personnel at the contractor's place of business or at an agreed-upon location. All discrepancies noted in the inspection must be fixed and documented at the time of proposal submission.

4.0 Applicable Documents. The contractor is responsible for review and adherence to the following applicable documents, as they apply to this contract:

4.1. SECNAVINST 3770.1 Series: Use of Department of the Navy Aviation Facilities by Other Than United States Department of Defense Aircraft

4.2. CNAF-M 3710.7 Series: NATOPS General Flight and Operating Procedures

4.3. UNSTPSINST 3710.2 Series: Visiting Aircraft Standard Operating Procedures

4.4. USNTPSINST 3710.3 Series: Qualitative Evaluation Program 2 Encl (1)

5.0 Period of Performance. The period of performance for this Qualitative Evaluation is 05/18/2026-06/30/2026 (planned), exact flight dates set by USNTPS flight schedule.

6.0 Aircraft Requirements.

6.1. One MD-500 aircraft required to complete up to 17 hours of student/instructor/pilot flight demonstration exercises.

6.2. Aircraft is to be configured with dual flight controls (capable of being flown from the either seat).

6.3. The aircraft must meet applicable FAA standards for the appropriate category and class.

6.4. Satisfies all scheduled and required maintenance periods such that the aircraft will be available throughout the contracted flight hour period and calendar duration for each demonstration/evaluation period.

6.5. Required to operate in day VMC within controlled airspace requiring a Mode 3C transponder and VHF communications.

6.6. The aircraft must be authorized to operate on one of three fuels provided: JP-5, JP-8, or 100LL.

7.0 Safety Pilot Requirements. A contractor or contractor-approved pilot-in-command (hereafter referred to as the safety pilot) is required. The safety pilot is to be FAA Certified Commercial Pilot rated in the MD-500 aircraft. In addition to all applicable Federal Aviation Regulations, the minimum qualifications for the contractor furnished safety pilot are:

7.1. A Certified Flight Instructor (CFI) as required by USNTPSINST 3710.3 Series.

7.2. A minimum of 500 flight hours.

7.3. A minimum of 250 flight hours first pilot time in airplanes.

7.4. A minimum of 50 hours in the MD-500, with not less than 5 hours in the MD-500 within the previous 60 days prior to flight operations at Patuxent River, MD.

7.5. Must have a current FAA Commercial pilot certificate with current medical qualifications and required aircraft certifications.

7.6. An initial safety pilot qualification flight and NAS Patuxent River local area familiarization will be completed prior to student flights, these flight are executed concurrent with hours specified in paragraph 6.1 at cost specified in paragraph

9.0. If the safety pilot has flown demonstration flights with USNTPS within the preceding year, the initial safety pilot qualification flight is not required.

8.0 Performance Requirements. During the flights, the flying qualities, performance characteristics and onboard systems will be evaluated throughout the aircraft operating envelope.

The safety pilot shall be in the aircraft for all flights and shall act as the pilot-in-command.

Contractor support services shall include:

8.1. A thorough briefing for all personnel covering aircraft systems, limitations, procedures, and safety.

8.1.1. Contractor shall provide additional briefings if required due to personnel scheduling conflicts.

8.2. A contractor provided safety pilot to act as the pilot-in-command for all flights.

3 Encl (1)

8.2.1. Records of safety pilot to be furnished to USNTPS Flight Operations to include scans or photos of FAA pilot certificate, FAA instructor certificate, medical certificate, and Pilot History Form.

8.3. Maintenance, oil, special equipment, and any other support services associated with the operation of the aircraft (logistics and maintenance support).

8.3.1. The contractor shall comply with Federal regulations for all hazardous material as found in the Code of Federal Regulations (CFR), Title 40, Parts 260-265, 270, 300 and state regulations for hazardous wastes found in the Code of Maryland Regulations (COMAR), Title 10, Subtitle 26. The contractor shall be responsible for transportation, accumulation, and turnin of regulated and hazardous waste, waste oils/fuels if not previously agreed to. Material safety data sheets for all hazardous materials brought on station will be mailed to USNTPS, Hazardous Waste Program Manager, Code 55TP91A, at least two weeks prior to arrival.

8.4. Any flight gear specific to the aircraft type.

8.5. Access to the aircraft and associated maintenance records and logs for inspection by USNTPS during the period of performance.

8.5.1. Provide scans or photos of aircraft's maintenance logs, registration, FAA Airworthiness certificate, and Operating Limitations (if applicable) to USNTPS Maintenance Point of Contact.

8.6. Demonstration flight(s) totaling up to 17 hours for USNTPS student/instructor exercise to be conducted at NAS Patuxent River, MD.

8.7. Aircraft reposition or ferry costs should be specified (per cost structure), up to 8.8 hours. This flight cost is in addition to the demonstration flight hours as defined in paragraph 3.1.

9.0 Actual flight time for reporting purposes is defined in CNAF-M 3710.7 Series. During ferry flights to/from the designated check ride or QE location, the "flight hour rate with fuel cost" is defined as the total cost for the ferry pilot, aircraft usage, fuel and maintenance. Once at the designated check ride or QE location, the "flight hour rate without fuel" will apply. For "flight hours without fuel cost", USNTPS will provide JP-5, JP-8 or 100LL and therefore will not be billed for fuel costs from the contractor. The safety pilot, aircraft usage and maintenance costs will still be included however. USNTPS will provide hangar and flight line space for the duration of the demonstration flight period. In the event the aircraft requires extended maintenance, hangar space will be provided for up to two additional weeks. It remains the responsibility of the contractor to provide the maintenance of the aircraft. Government provided maintenance personnel will assist with aircraft movement into and out of the hangar. At the discretion of the USNTPS Maintenance Officer, limited maintenance assistance may be provided for routine maintenance tasks; however, USNTPS will not be held liable for their actions.

10.0 The contractor maintains liability for any damage or loss of the aircraft and third party liability.

10.1. Current insurance, permitting requirements, and necessary forms are defined by OPNAVINST 3700.19 Series. Requirements and forms can be obtained via the following website: https://www.cnic.navy.mil/om/calp.html.

10.2. Note that when DD Form 2400 states a Combined Single Limit amount and then follows it with the phrase "sublimited to $100,000 per passenger", the stated amount (e.g. $1,000,000) is the total coverage and the $100,000 per passenger is 4 Encl (1) within the $1,000,000, not in addition to it. This would mean that the coverage would not meet the minimum requirement. As an example, for aircraft less than 12,500 lbs with 3 passenger seats, the minimum is $500,000 bodily injury plus $500,000 property damage plus $300,000 for passenger seats, for a total of $1,300,000.

Bodily Injury PLUS Property

Damage

PLUS

Per

Passenger Seat

Minimum

Aircraft less than 12,500 lbs MGTOW

$100,000/person

$500,000/accident

PLUS $500,000 PLUS $100,000

$1,000,000

PLUS

$100,000 per passenger seat

Aircraft 12,500 lbs and greater

MGTOW

$100,000/person

$1,000,000/accident

PLUS $1,000,000 PLUS $100,000

$2,000,000

PLUS

$100,000 per passenger seat

(1)

(1) A percentage reduction applies

10.3. Minimum insurance requirements and landing permits must be received and verified prior to transit to and landing at NAS Patuxent River. Send original blue- ink signed copies of insurance certifications and civil aircraft landing permit applications to:

Mr. Theodore Gundling Air Operations 47795 Jackson Road Patuxent River, MD 20670

(V) (301) 342-7968 theodore.gundling.ctr@navy.mil

10.3.1. The following is a list of required documents to attain a civil landing permit:

10.3.1.1. DD2400, Civil Aircraft Certificate of Insurance

10.3.1.2. DD2401, Civil Aircraft Landing Permit Application

10.3.1.3. DD2402, Civil Aircraft Hold Harmless

10.3.1.4. LLC Affidavit (if applicable)

10.4. Copies of pilot qualifications, along with confirmation of submitted landing permit shall be sent to USNTPS Flight Operations. USNTPS Flight Operations will issue the Prior Permission Required authorization number to the contractor after all paperwork has been confirmed.

US Naval Test Pilot School Operations Ms. Katlyn Graves

(V) (301) 757-5040

(F) (301) 342-5940 Katlyn.s.gravesspalding.ctr@us.navy.mil 5 Encl (1)

10.5. The USNTPS QE Program Manager is:

Mr. Nicholas Wirz

386-405-9639 Cc: nicholas.m.wirz.civ@us.navy.mil

10.6. The USNTPS Maintenance Point of Contact is:

Mr. William Currey William.o.currey2.civ@us.navy.mil

11.0 Standards of Quality and Timeliness

PBSOW

Paragraph Performance Objective Performance Standard Acceptable Quality Level

Method of Surveillance

8.1 Flight Briefing

Thorough 1 hr briefing covering aircraft systems limitations, procedures and safety.

Thorough briefing provided to aircrew prior to flight demonstration.

Government

Observation &

Analysis

8.2

Safety Pilot provided to act as Pilot-in-Command

Safety Pilot must meet minimum qualifications as specified in Paragraph 7.0.

Safety Pilot meets

100% of requirements.

Government

Observation & Analysis of applicable documents

8.3 Maintenance, oil, special equipment, and other support services

All services required to maintain aircraft to execute the flight demonstrations.

100% of services provided

Government

Observation &

Analysis

8.4 Provide any flight gear specific to the aircraft type

All required flight gear provided. 100% of gear provided

Government

Observation &

Analysis

12.0 Contract Line Item Number (CLIN) Descriptions:

12.1. CLIN 0001 (Flight Hours): Flight hour rates include costs as defined in paragraph

9.0 above. The expected sortie duration will be 1.0 hours per member, for a total of up to 17 hours. Sortie completion determination will be the responsibility of the QE Program Manager. If a sortie does not meet the training objectives due to an aircraft failure or non-performance of the safety pilot, the hours for that flight will not be accrued towards the total contract. If a sortie does not meet training 6 Encl (1) objectives because it returned early due to a weather recall initiated by the USNTPS, then any hours completed will be accrued. Flight hours will be calculated in accordance with CNAF-M 3710.7 (takeoff to landing, plus 5 minutes) as entered in FIST post flight and will be billed in increments of 0.1 hour.

12.2. CLIN 0002 (Ferry Flight and Travel): The contractor will ensure the aircraft is on station and ready for all flight events. One ferry flight round-trip from the aircraft home station to NAS Patuxent River, MD is expected per performance period. The aircraft is expected to remain on station during the entire performance period until all flight hours are complete. Prior coordination with the QE Program Manager is required to fly the aircraft off station during the performance period (i.e. a weekend airshow). Any aircraft relocation that does not support USNTPS will not accrue an additional ferry flight. Travel expenses cover the cost of lodging, rental vehicles, and per diem IAW Joint Travel Regulations. Travel expenses will be charged for up to one day prior to the first scheduled flight to one day after the last flight is completed.

12.3. CLIN 0003 (Pilot Daily Rate and Travel) Travel expenses cover the cost of travel, lodging, rental vehicles, and per diem IAW Joint Travel Regulations. Travel expenses will be charged for up to one day prior to the first scheduled flight to one day after the last flight is completed. Pilot rate is the cost for the pilot to be on station, KNHK.

12.4. CLIN 0004 (Maintainer Daily Rate and Travel) Travel expenses cover the cost of travel, lodging, rental vehicles, and per diem IAW Joint Travel Regulations.

Travel expenses will be charged for up to one day prior to the first scheduled flight to one day after the last flight is completed. Maintainer rate is the cost for the maintainer to be on station, KNHK

Requirements Test Pilot

Section D - Packaging and Marking

Section E - Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: see SOW

DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas Wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Inspection and Acceptance Location

Both Destination Instructions: see SOW

DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas Wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Inspection and Acceptance Location

Both Destination Instructions: see SOW

DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas Wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Inspection and Acceptance Location

Both Destination Instructions: see SOW

DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas Wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Inspection and Acceptance Location

Both Destination Instructions: see SOW

DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas Wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Section F - Deliveries or Performance

Overall Contract Delivery Period

Line Item Delivery Schedule Quantity Address and POC

Delivery Period From 18 May 2026 to 30 Jun 2026

1 Job Ship To DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Delivery Period From 18 May 2026 to 30 Jun 2026

1 Job Ship To DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Delivery Period From 18 May 2026 to 30 Jun 2026

1 Job Ship To DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Delivery Period From 18 May 2026 to 30 Jun 2026

1 Job Ship To DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas wirz, POC Email: nicholas.m.wirz.civ@us.navy.mil

Delivery Period From 18 May 2026 to 30 Jun 2026

1 Job Ship To DoDAAC: N00421 CountryCode: USA

NAVAL AIR WARFARE CENTER AIR DIV

BUILDING 439 SUITE F, 47110 LILJENCRANTZ ROAD UNIT 7

PATUXENT RIVER, MD 20670-1545

UNITED STATES

Nicholas wirz, POC

Email: nicholas.m.wirz.civ@us.navy.mil

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.247-34 F.o.b. Destination. Jan 1991

Section G - Contract Administration Data

DFARS Clauses Incorporated by Full Text

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. (Dec 2018)

ELECTRONIC SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS (DEC 2018)

(a) . As used in this clause- Definitions

"Contract financing payment" means an authorized Government disbursement of monies to a contractor prior to acceptance of supplies or services by the Government.

(1) Contract financing payments include-

(i) Advance payments;

(ii) Performance-based payments;

(iii) Commercial advance and interim payments;

(iv) Progress payments based on cost under the clause at Federal Acquisition Regulation (FAR) 52.232-16, Progress Payments;

(v) Progress payments based on a percentage or stage of completion (see FAR 32.102(e)), except those made under the clause at FAR 52.232-5, Payments Under Fixed-Price Construction Contracts, or the clause at FAR 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

(vi) Interim payments under a cost reimbursement contract, except for a cost reimbursement contract for services when Alternate I of the clause at FAR 52.232-25, Prompt Payment, is used.

(2) Contract financing payments do not include-

(i) Invoice payments;

(ii) Payments for partial deliveries; or

(iii) Lease and rental payments.

"Electronic form" means any automated system that transmits information electronically from the initiating system to affected systems.

"Invoice payment" means a Government disbursement of monies to a contractor under a contract or other authorization for supplies or services accepted by the Government.

(1) Invoice payments include-

(i) Payments for partial deliveries that have been accepted by the Government;

(ii) Final cost or fee payments where amounts owed have been settled between the Government and the contractor;

(iii) For purposes of subpart 32.9 only, all payments made under the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, and the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

(iv) Interim payments under a cost-reimbursement contract for services when Alternate I of the clause at 52.232-25, Prompt Payment, is used.

(2) Invoice payments do not include contract financing payments.

"Payment request" means any request for contract financing payment or invoice payment submitted by the Contractor under this contract or task or delivery order.

"Receiving report" means the data prepared in the manner and to the extent required by Appendix F, Material Inspection and Receiving Report, of the Defense Federal Acquisition Regulation Supplement.

(b) Except as provided in paragraph (d) of this clause, the Contractor shall submit payment requests and receiving reports in electronic form using Wide Area WorkFlow (WAWF). The Contractor shall prepare and furnish to the Government a receiving report at the time of each delivery of supplies or services under this contract or task or delivery order. .

(c) Submit payment requests and receiving reports to WAWF in one of the following electronic formats:

(1) Electronic Data Interchange.

(2) Secure File Transfer Protocol.

(3) Direct input through the WAWF website.

(d) The Contractor may submit a payment request and receiving report using methods other than WAWF only when-

(1) The Contractor has requested permission in writing to do so, and the Contracting Officer has provided instructions for a temporary alternative method of submission of payment requests and receiving reports in the contract administration data section of this contract or task or delivery order;

(2) DoD makes payment for commercial transportation services provided under a Government rate tender or a contract for transportation services using a DoD-approved electronic third party payment system or other exempted vendor payment/invoicing system (e.g., PowerTrack, Transportation Financial Management System, and Cargo and Billing System);

(3) DoD makes payment on a contract or task or delivery order for rendered health care services using the TRICARE Encounter Data System; or

(4) The Governmentwide commercial purchase card is used as the method of payment, in which case submission of only the receiving report in WAWF is required.

(e) Information regarding WAWF is available at https://wawf.eb.mil/.

(f) In addition to the requirements of this clause, the Contractor shall meet the requirements of the appropriate payment clauses in this contract when submitting payment requests.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports WAWF payment instructions.

in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Reports

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

2in1

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in Document routing.

WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N64142

Issue By DoDAAC N00421

Admin DoDAAC N00421

Inspect By DoDAAC N00421

Ship To Code N00421

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N00421

Service Acceptor (DoDAAC) N00421

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

WAWF POC: amy.v.olszewski.civ@us.navy.mil KO POC: benjamin.r.flores3.civ@us.navy.mil

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Section H - Special Contract Requirements

Section I - Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) (Alternate I) Feb 2026 Alternate I Feb 2026 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

52.213-4 Terms and Conditions-Simplified Acquisitions (Noncommercial). (Deviation 2026- O0038)

Feb 2026

52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.225-1 Buy American-Supplies (Deviation 2026-O0038) Feb 2026 52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act. (Deviation 2026-O0038) Feb 2026

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act. (Deviation 2026-O0038) (Alternate II)

Feb 2026 Alternate II Feb 2026

52.225-5 Trade Agreements. Nov 2023 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) (Alternate I) Feb 2026 Alternate I Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

52.249-8 Default (Fixed-Price Supply and Service). Apr 1984 52.253-1 Computer Generated Forms. (Deviation 2026-O0038) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7003 Control of Government Personnel Work Product. Apr 1992

252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information.

Jan 2023

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support. Jan 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.225-7013 Duty-Free Entry. Aug 2025 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7010 Levies on Contract Payments. Dec 2006 252.239-7010 Cloud Computing Services. Jan 2023 252.243-7001 Pricing of Contract Modifications. Dec 1991 252.246-7008 Sources of Electronic Parts. Jan 2023

252.247-7023 Transportation of Supplies by Sea. Oct 2024 252.247-7023 Transportation of Supplies by Sea. (Alternate I) Oct 2024 Alternate I Oct 2024

FAR Clauses Incorporated by Full Text

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038) (Alternate I)

(Feb 2026) Alternate I (Feb 2026)

Alternate I . When contemplating a time-and-materials or labor-hour contract, substitute the following (FEB 2026) (DEVIATION 2026-O0038) paragraphs (a), (b), (i), (l), and (m) for those in the basic clause.

(a) The clause at Federal Acquisition Regulation (FAR) 52.202-1, Definitions, is incorporated by reference. As used in this clause-

Direct materials means those materials that enter directly into the end product, or that are used or consumed directly in connection with the furnishing of the end product or service.

Hourly rate means the rate(s) prescribed in the contract for payment for labor that meets the labor category qualifications of a labor category specified in the contract that are-

(1) Performed by the contractor;

(2) Performed by the subcontractors; or

(3) Transferred between divisions, subsidiaries, or affiliates of the contractor under a common control.

Materials means-

(1) Direct materials, including supplies transferred between divisions, subsidiaries, or affiliates of the contractor under a common control;

(2) Subcontracts for supplies and incidental services for which there is not a labor category specified in the contract;

(3) Other direct costs (e.g., incidental services for which there is not a labor category specified in the contract, travel, computer usage charges, etc.);

(4) The following subcontracts for services which are specifically excluded from the hourly rate: [Insert any subcontracts for services ____ ; andto be excluded from the hourly rates prescribed in the schedule.]

(5) Indirect costs specifically provided for in this clause.

Subcontract means any contract, as defined in FAR 2.101, entered into with a subcontractor to furnish supplies or services for performance of the prime contract or a subcontract including transfers between divisions, subsidiaries, or affiliates of a contractor or subcontractor. It includes, but is not limited to, purchase orders, and changes and modifications to purchase orders.

(b) .Inspection/Acceptance

(1) The Government has the right to inspect and test all materials furnished and services performed under this contract at all places and times before acceptance. The Government will perform inspections and tests in a manner that will not unduly delay the work.

(2) If the Government performs inspection or tests on the premises of the Contractor or a subcontractor, the Contractor shall furnish and shall require subcontractors to furnish all reasonable facilities and assistance for the safe and convenient performance of these duties.

(3) Unless otherwise specified in the contract, the Government will accept or reject services and materials at the place of delivery as promptly as practicable after delivery, and they will be presumed accepted 60 days after the date of delivery, unless accepted earlier.

(4) At any time during contract performance, but not later than 6 months (or such other time as may be specified in the contract) after acceptance of the services or materials last delivered under this contract, the Government may require the Contractor to replace or correct services or materials that at time of delivery failed to meet contract requirements. Except as otherwise specified in paragraph (b)(6) of this clause, the cost of replacement or correction shall be determined under paragraph (i) of this clause, but the "hourly rate" for labor hours incurred in the replacement or correction shall be reduced to exclude that portion of the rate attributable to profit. Unless otherwise specified below, the portion of the "hourly rate" attributable to profit shall be 10 percent. The Contractor shall not tender for acceptance materials and services required to be replaced or corrected without disclosing the former requirement for replacement or correction, and, when required, shall disclose the corrective action taken. [Insert ____ portion of labor rate attributable to profit.]

(5)(i) If the Contractor fails to proceed with reasonable promptness to perform required replacement or correction, and if the replacement or correction can be performed within the ceiling price (or the ceiling price as increased by the Government), the Government may-

(A) By contract or otherwise, perform the replacement or correction, charge to the Contractor any increased cost, or deduct such increased cost from any amounts paid or due under this contract; or

(B) Terminate this contract for cause.

(ii) Failure to agree to the amount of increased cost to be charged to the Contractor shall be a dispute under the Disputes clause of the contract.

(6) Notwithstanding paragraphs (b)(4) and (5) of this clause, the Government may, at any time, require the Contractor to remedy by correction or replacement, without cost to the Government, any failure by the Contractor to comply with the requirements of this contract, if the failure is due to-

(i) Fraud, lack of good faith, or willful misconduct on the part of the Contractor's managerial personnel; or

(ii) The conduct of one or more of the Contractor's employees selected or retained by the Contractor after any of the Contractor's managerial personnel has reasonable grounds to believe that the employee is habitually careless or unqualified.

(7) This clause applies in the same manner and to the same extent to corrected or replacement materials or services as to materials and services originally delivered under this contract.

(8) The Contractor has no obligation or liability under this contract to correct or replace materials and services that at time of delivery do not meet contract requirements, except as provided in this clause or as may be otherwise specified in the contract.

(9) Unless otherwise specified in the contract, the Contractor's obligation to correct or replace Government-furnished property shall be governed by the clause pertaining to Government property.

(i) .Payments

(1) . The Government will pay the Contractor as follows upon the submission of commercial invoices approved by the Work performed Contracting Officer:

(i) .Hourly rate

(A) The amounts shall be computed by multiplying the appropriate hourly rates prescribed in the contract by the number of direct labor hours performed. Fractional parts of an hour shall be payable on a prorated basis.

(B) The rates shall be paid for all labor performed on the contract that meets the labor qualifications specified in the contract.

Labor hours incurred to perform tasks for which labor qualifications were specified in the contract will not be paid to the extent the work is performed by individuals that do not meet the qualifications specified in the contract, unless specifically authorized by the Contracting Officer.

(C) Invoices may be submitted once each month (or at more frequent intervals, if approved by the Contracting Officer) to the Contracting Officer or the authorized representative.

(D) When requested by the Contracting Officer or the authorized representative, the Contractor shall substantiate invoices (including any subcontractor hours reimbursed at the hourly rate in the schedule) by evidence of actual payment, individual daily job timecards, records that verify the employees meet the qualifications for the labor categories specified in the contract, or other substantiation specified in the contract.

(E) Unless the Schedule prescribes otherwise, the hourly rates in the Schedule shall not be varied by virtue of the Contractor having performed work on an overtime basis.

( ) If no overtime rates are provided in the Schedule and the Contracting Officer approves overtime work in advance, overtime rates shall be 1 negotiated.

( ) Failure to agree upon these overtime rates shall be treated as a dispute under the Disputes clause of this contract.2

( ) If the Schedule provides rates for overtime, the premium portion of those rates will be reimbursable only to the extent the overtime is approved 3 by the Contracting Officer.

(ii) .Materials

(A) If the Contractor furnishes materials that meet the definition of a commercial product at FAR 2.101, the price to be paid for such materials shall not exceed the Contractor's established catalog or market price, adjusted to reflect the-

( ) Quantities being acquired; and1

( ) Any modifications necessary because of contract requirements.2

(B) Except as provided for in paragraph (i)(1)(ii)(A) and (D)(2) of this clause, the Government will reimburse the Contractor the actual cost of materials (less any rebates, refunds, or discounts received by the contractor that are identifiable to the contract) provided the Contractor-

( ) Has made payments for materials in accordance with the terms and conditions of the agreement or invoice; or1

( ) Makes these payments within 30 days of the submission of the Contractor's payment request to the Government and such payment is in 2 accordance with the terms and conditions of the agreement or invoice.

(C) To the extent able, the Contractor shall-

( ) Obtain materials at the most advantageous prices available with due regard to securing prompt delivery of satisfactory materials; and1

( ) Give credit to the Government for cash and trade discounts, rebates, scrap, commissions, and other amounts that are identifiable to the contract.2

(D) Unless listed below, other direct and indirect costs will not be reimbursed.

( ) . The Government will reimburse the Contractor on the basis of actual cost for the following, provided such costs comply with 1 Other direct costs the requirements in paragraph (i)(1)(ii)(B) of this clause: [Insert each element of other direct costs (e.g., travel, computer usage charges, etc. ____ Insert "None" if no reimbursement for other direct costs will be provided. If this is an indefinite delivery contract, the Contracting Officer may insert "Each order must list separately the elements of other direct charge(s) for that order or, if no reimbursement for other direct costs will be provided, insert 'None'".]

( . The Government will reimburse the Contractor for indirect costs on a pro-2) Indirect costs (material handling, subcontract administration, etc.)

rata basis over the period of contract performance at the following fixed price: [Insert a fixed amount for the indirect costs and payment schedule. ____ Insert "$0" if no fixed price reimbursement for indirect costs will be provided. (If this is an indefinite delivery contract, the Contracting Officer may insert "Each order must list separately the fixed amount for the indirect costs and payment schedule or, if no reimbursement for indirect costs, insert 'None')."]

(2) . The total cost to the Government for the performance of this contract shall not exceed the ceiling price set forth in the Total cost Schedule. The Contractor agrees to use its best efforts to perform the work specified in the Schedule and all obligations under this contract within such ceiling price. If at any time the Contractor has reason to believe that the hourly rate payments and material costs that will accrue in performing this contract in the next succeeding 30 days, if added to all other payments and costs previously accrued, will exceed 85 percent of the ceiling price in the Schedule, the Contractor shall notify the Contracting Officer giving a revised estimate of the total price to the Government for performing this contract with supporting reasons and documentation. If at any time during the performance of this contract, the Contractor has reason to believe that the total price to the Government for performing this contract will be substantially greater or less than the stated ceiling price, the Contractor shall so notify the Contracting Officer, giving a revised estimate of the total price for performing this contract, with supporting reasons and documentation. If at any time during performance of this contract, the Government has reason to believe that the work to be required in performing this contract will be substantially greater or less than the stated ceiling price, the Contracting Officer will so advise the Contractor, giving the revised estimate of the total amount of effort to be required under the contract.

(3) . The Government will not be obligated to pay the Contractor any amount in excess of the ceiling price in the Schedule, and Ceiling price the Contractor shall not be obligated to continue performance if to do so would exceed the ceiling price set forth in the Schedule, unless and until the Contracting Officer notifies the Contractor in writing that the ceiling price has been increased and specifies in the notice a revised ceiling that shall constitute the ceiling price for performance under this contract. When and to the extent that the ceiling price set forth in the Schedule has been increased, any hours expended and material costs incurred by the Contractor in excess of the ceiling price before the increase shall be allowable to the same extent as if the hours expended and material costs had been incurred after the increase in the ceiling price.

(4) . At any time before final payment under this contract, the Contracting Officer (or authorized representative) will have Access to records access to the following (access shall be limited to the listing below unless otherwise agreed to by the Contractor and the Contracting Officer):

(i) Records that verify that the employees whose time has been included in any invoice meet the qualifications for the labor categories specified in the contract;

(ii) For labor hours (including any subcontractor hours reimbursed at the hourly rate in the schedule), when timecards are required as substantiation for payment-

(A) The original timecards (paper-based or electronic);

(B) The Contractor's timekeeping procedures;

(C) Contractor records that show the distribution of labor between jobs or contracts; and

(D) Employees whose time has been included in any invoice for the purpose of verifying that these employees have worked the hours shown on the invoices.

(iii) For material and subcontract costs that are reimbursed on the basis of actual cost-

(A) Any invoices or subcontract agreements substantiating material costs; and

(B) Any documents supporting payment of those invoices.

(5) . Each payment previously made shall be subject to reduction to the extent of amounts, on preceding Overpayments/Underpayments invoices, that are found by the Contracting Officer not to have been properly payable and shall also be subject to reduction for overpayments or to increase for underpayments. The Contractor shall promptly pay any such reduction within 30 days unless the parties agree otherwise. The Government will pay any such increases within 30 days, unless the parties agree otherwise. The Contractor's payment will be made by check.