Solicitation - N0016726Q1120.pdf

This is a combined synopsis/solicitation for commercial items prepared in accordance with Federal Acquisition Regulation (FAR) as supplemented with additional information included in this notice. Naval Surface Warfare Center Carderock Division (NSWCCD) intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for NSWCCD electron beam welding qualification that meet the specifications outlined below. This announcement constitutes the only solicitation, and a written solicitation will not be issued. Quotes are being requested under Request for Quotation (RFQ) no. N0016726Q1120. The NAICS code is 541330.

The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2026-01 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20260507. SEE

ATTACHED SOLICITATION FOR CLAUSES AND PROVISIONS.

The Government will award a contract resulting from this solicitation to the responsible quoter whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered.

The Government intends to evaluate all timely quotes received from eligible quoters as outlined below. The Government intends to evaluate quotations and award a contract without discussions with quoters.

Evaluation Factors (See 52.212-2- Evaluation—Commercial Products and Commercial Services)

1. Technical Capability/Approach – Quotes must reflect the required specifications included in the RFQ.

2. Past Performance - The past performance evaluation assesses the degree of confidence the Government has in the Offeror’s ability to provide products and services that meet its customers’ needs based on a demonstrated record of performance.

CMMC Certification: Quoters must provide either documentation demonstrating that they meet, at a minimum, CMMC Level: LEVEL 2(self) certification or provide their CMMC UID number with their submission.

Questions/clarification regarding this solicitation must be submitted via email to michael.s.brodie7.civ@us.navy.mil by June 24, 2026, at 12pm EST. All questions will be answered in an amendment to the solicitation.

Quote packages are due by July 06, 2026, at 12pm EST. Late quotes will not be considered. Quote packages shall be sent to michael.s.brodie7.civ@us.navy.mil and contain a cover sheet that provides the following information:

a) Official Company Name.

b) Point of contact including name and phone number; and

c) Cage Code number.

d) SAM UEI number

The Point of Contact for this acquisition is Michael Brodie, at michael.s.brodie7.civ@us.navy.mil mailto:steven.besanko@navy.mil mailto:barbaraann.witz@navy.mil mailto:barbaraann.witz@navy.mil

Solicitation/Contract Form Continuation

Electron Beam Welding Qualification

N0016726Q1120

Continuation of Supplies or Services and Prices/Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Electron Beam Welding Qualification - In Accordance With Performance Work Statement (PWS) The contractor shall perform EB welding qualification tasks in accordance with reference 2.4 that includes developing EB weld procedures in accordance with reference 2.5. The contractor shall manufacture a minimum of three Nickel Aluminum Bronze (NAB) "S1L" part configurations defined within the PWS references for welding qualification in order to become approved for production welding. The contractor shall conduct 100% self inspection, maintain ISO9001:2015 compliant quality controls, ensure all workmanship meets drawing requirements, and properly store, handle, and ship all unclassified materials and Distribution C drawings. The contractor shall furnish all labor, equipment, and additional materials necessary to perform the tasking in accordance with the references.

Pricing Arrangement: Firm Fixed Price

1 Lot

Continuation of Description Electron Beam Welding Qualification

1. BACKGROUND: The Advanced Propulsor Management Office (APMO) (Code 808) in the Naval Architecture and Engineering Department (Code 80) of the Naval Surface Warfare Center, Carderock Division (NSWCCD) is responsible for managing the manufacture and delivery of United States Navy submarine propulsors. The APMO requires NAVSEA qualified Electron Beam (EB) welding capabilities to support propulsor component construction and installation. This request is for unqualified NSWCCD electron welding contractor only, NSWCCD electron welding qualified contractors are not interested parties.

2. SCOPE: The contractor shall perform EB welding qualification tasks in accordance with reference 2.4 that includes developing EB weld procedures in accordance with reference 2.5. The contractor shall manufacture a minimum of three Nickel Aluminum Bronze (NAB) "S1L" part configurations defined within the PWS references for welding qualification in order to become approved for production welding. The contractor shall conduct 100% self inspection, maintain ISO9001:2015 compliant quality controls, ensure all workmanship meets drawing requirements, and properly store, handle, and ship all unclassified materials and DistributionC drawings. The contractor shall furnish all labor, equipment, and additional materials necessary to perform the tasking in accordance with the references.

References:

2.1 (DISTR C)_PR15006 REV B_BODY TUBES.pdf

2.2 (DISTR C)_PR15007 REV C_TOP CAPS.pdf

2.3 (DISTR C)_PR15008 REV C_BOTTOM CAPS.pdf

2.4 (DISTR C)_PR16006 REV C_TYP PLUG WELDING DETAILS.pdf

2.5 SAE AMS 2680C, Electron-Beam Welding for Fatigue Critical Applications

2.6 DOD 5220.22-M - National Industrial Security Program

3. GENERAL REQUIREMENTS:

3.1 Management Status Report: The contractor shall submit a monthly Contractor's Progress, Status and Management Report (CDRL A005) to the contracting officer and the Government Technical Representative.

3.2 Quality System: The contractor's quality system shall meet ISO 9001:2015 or later. The contractor may submit an alternative quality system subject to approval.

3.3 Material: The contractor shall submit material certifications for all material provided under this contract (CDRL A002). All material certifications shall show use of domestic materials per DFAR Specialty Metal requirements.

3.4 Facilities: The contractor shall maintain a minimum Confidential level security clearance for all personnel performing the work, as well as for the workspace in which the work will be conducted. Although the qualification effort being solicited is CUI, the formal work to which the qualification applies will be Confidential in nature.

3.5 Weld Qualifications/Certifications Requirement: Electron Beam Welders shall hold current certification to AWS D17.1 (2012 or newer), Specification for Fusion Welding for Aerospace Applications.

4. TECHNICAL REQUIREMENTS:

4.1 Government Furnished Material (GFM): The Government will provide Nickel Aluminum Bronze (NAB) GFM within thirty calendar days after contract award for machining of "S1L" piece parts within reference 2.1-2.3. Segments of NAB tube and rod will be of lengths of approximately three to twelve feet. The Government will provide material certifications for all provided GFM to the contractor digitally prior to delivery. Upon receipt of the GFM, the contractor shall conduct an independent dimensional inspection and inventory of all GFM provided and shall confirm with the Government that GFM is sufficient to successfully machine the required quantities of each geometry. All excess GFM raw material and piece parts shall be properly identified, marked, and returned to the Government upon completion of the contract.

4.2 Piece Part Machining: The contractor shall machine a minimum quantity of "S1L" piece parts for three "S1L" assemblies in accordance with references 2.1-2.3 to be used for EB welding qualification. All piece-parts shall be cleaned with acetone, or equivalent cleaning solvent, to remove residual cutting lubricants post-machining. The contractor shall dimensionally inspect all fabricated piece parts to their respective drawing requirements, note 304 and table 1C sampling plan in references 2.1-2.3 shall not apply. The contractor shall complete all individual drawing requirements and submit piece part certification packages in accordance with Note 305 of each drawing (CDRLA001).

4.2.1 Dimensional Inspection: The contractor's measurement equipment shall have proof of calibration and be traceable to a nationally recognized standard with substantiating documentation appended to (CDRL A002). Measurement uncertainty associated with any dimensional inspection device shall be withing +/- 20% of the feature tolerance being measured.

4.2.2 Nondestructive Surface Inspection: The contractor shall perform NDT inspection of each NAB piece part under PWS section 4.2, in accordance with Note 303 of references 2.1 to 2.3 (CDRL A002). The contractor shall notify the Government of any non-compliant piece parts within five business days.

4.2.3 Final Certification Package: The contractor shall complete all individual drawing requirements and submit piece part certification packages in accordance with Note 305 of references 2.1 to 2.3 (CDRL A002).

4.3 Weld Procedure Qualification: The contractor shall possess or develop a qualified welding procedure that is approved by NAVSEA specifically for VIRGINIA Class propulsor hardware in accordance with reference 2.4. Prior to welding, the NAVSEA 05P3 Technical Warrant Holder must approve the contractor's fabrication and welding procedures (CDRL A003). If the contractor requires development of a new weld procedure, the contractor shall perform a weld qualification test prior to welding at no additional cost to the Government. The contractor shall document approval of the Navy Welding Procedure (CDRL A004).

4.3.1 Weld Joint Machining: The contractor shall perform required machining per reference 2.4 to the piece parts manufactured in PWS section 4.2 for EB welding preparation. Machining operations shall be performed without the use of machining fluid to ensure no contamination of any of the internal surfaces occurs during this operation.

4.3.2 EB Welding: The contractor, prior to any welding, shall clean all piece parts manufactured in PWS section 4.2 to remove oxide build-up and machine oil residue. The contractor shall take steps during cleaning and other weld preparation actions to ensure internal surfaces of units are free from contamination post EB welding. The contractor shall EB weld units with qualified EB weld procedures in accordance with References 2.4 and 2.5.

4.3.3 Production EB Weld Approval: The contractor shall report all requirements of reference 2.4 to the Government for approval of future production EB welding (CDRL A004).

4.4 Disposal and Delivery: The contractor shall dispose of all piece parts produced during the manufacturing qualification effort and shall return to the Government any GFM that was not used, following NAVSEA's final approval of the Contractor's qualification effort.

5. DELIVERABLES: The contractor shall deliver the following Contract Data Requirements Lists (CDRL) for this contract.

CDRL Title Data Item Description A001 Technical Report DI-MISC-80508B A002 Weld Quality Control Plan DI-QCIC-81722 A003 Welding Procedures DI-MISC-80875A A004 Weld Qualification Test Report DI-MISC-80876 A005 Contract Management Status Report DI-MGMT-80368A A006 Government Property Inventory Report DI-MGMT-80441D

The contractor shall prepare a digital copy of the final certification data package/technical report and deliver via email to:

TBD at Contract Award

The contractor shall deliver completed hardware to:

Naval Surface Warfare Center, Carderock Division 9500 MacArthur Boulevard, Bldg 3, Room 308 West Bethesda, MD 20817-5700 POC(s): TBD

6. PERIOD OF PERFORMANCE

The Period of Performance for the tasks outlined in Section4 is six months from the date of contract award.

7. CONTROLLED UNCLASSIFIED INFORMATION (CUI). The contractor shall identify and safeguard written and visual communications accessed, generated or Government-furnished for reference or development in accordance with DFARS 252.204-7012. Only Unclassified data is going to be handled as part of this effort. A DD254 will not be provided.

7.1. CUI shall be marked "For Official Use Only (FOUO)" subject to specified exemptions from the Freedom of Information Act (FOIA), as amended.

7.2. Technical documents are distribution controlled and shall be marked "DISTRIBUTION STATEMENT D" with further specificity contingent upon content at time of generation or development. Reference 2.3 for detailed instructions.

7.3. Utilize the Safe Access File Exchange (SAFE, https://safe.apps.mil.) for encrypted electronic file transmittal of CUI and DISTRIBUTION D-type documents.

(End of text)

Requirements Electron Beam Welding Qualification

Continuation of Packaging and Marking

Continuation of Inspection and Acceptance

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Destination Instructions: See Statement of Work (SOW) or Performance Work Statement (PWS) for Acceptance/inspection criteria.

DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION, 9500 MACARTHUR BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Continuation of Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC

Delivery Period From 15 Jul 2026 to 30 Sep

1 Lot Ship To DoDAAC: N00167 CountryCode: USA

NSWC CARDEROCK

CARDEROCK DIVISION BLDG 143, 9500 MACARTHUR

BOULEVARD

BETHESDA, MD 20817-5700

UNITED STATES

TBD, TBD

Email: TBD Telephone: TBD

Continuation of Accounting and Appropriation Data

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026- O0038)

Feb 2026

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026

52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation 2026-O0038)

Feb 2026

52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.204-7022 Expediting Contract Closeout. May 2021 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023 252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region. Jun 2023 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018 252.232-7010 Levies on Contract Payments. Dec 2006 252.245-7005 Management and Reporting of Government Property. Jan 2024 252.247-7023 Transportation of Supplies by Sea. Oct 2024 252.239-7018 Supply Chain Risk. Dec 2022

DFARS Clauses Incorporated by Full Text

252.204-7021 Contractor Compliance with the Cybersecurity Maturity Model Certification Level Requirements.

(Nov 2025)

CONTRACTOR COMPLIANCE WITH THE CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)

(a) . As used in this clause- Definitions

"Controlled unclassified information" means information the Government creates or possesses, or information an entity creates or possesses for or on behalf of the Government, that a law, regulation, or Governmentwide policy requires or permits an agency to handle using safeguarding or dissemination controls (32 CFR 2002.4(h)).

"Current" means-

(1) With regard to Conditional Cybersecurity Maturity Model Certification (CMMC) Status-

(i) Not older than 180 days for Conditional Level 2 (Self) assessments and Conditional Level 2 (certified third-party assessment organization (C3PAO)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR

170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance by an affirming official (see 32 CFR 170.4); and

(ii) Not older than 180 days for Conditional Level 3 (Defense Industrial Base Cybersecurity Assessment Center (DIBCAC)) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Conditional CMMC Status date (see 32 CFR 170.18); and

(B) A corresponding affirmation of continuous compliance by an affirming official;

(2) With regard to Final CMMC Status-

(i) Not older than 1 year for Final Level 1 (Self), with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.15); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official;

(ii) Not older than 3 years for Final Level 2 (Self) assessments and Final Level 2 (C3PAO) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.16 and 170.17); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(iii) Not older than 3 years for Final Level 3 (DIBCAC) assessments, with-

(A) No changes in compliance with the requirements at 32 CFR part 170 since the Final CMMC Status date (see 32 CFR 170.18); and

(B) A corresponding affirmation of continuous compliance, not older than 1 year, by an affirming official; and

(3) With regard to affirmation of continuous compliance (32 CFR 170.22), not older than 1 year with no changes in compliance with the requirements at 32 CFR part 170.

"Cybersecurity Maturity Model Certification (CMMC) status" means the result of meeting or exceeding the minimum required score for the corresponding assessment. The potential statuses are as follows:

(1) Final Level 1 (Self).

(2) Conditional Level 2 (Self).

(3) Final Level 2 (Self).

(4) Conditional Level 2 (C3PAO).

(5) Final Level 2 (C3PAO).

(6) Conditional Level 3 (DIBCAC).

(7) Final Level 3 (DIBCAC).

"Cybersecurity Maturity Model Certification unique identifier (CMMC UID)" means 10 alpha-numeric characters assigned to each CMMC assessment and reflected in the Supplier Performance Risk System (SPRS) for each contractor information system.

"Federal contract information (FCI)" means information, not intended for public release, that is provided by or generated for the Government under a contract to develop or deliver a product or service to the Government. It does not include information provided by the Government to the public, such as on public websites, or simple transactional information, such as information necessary to process payments.

"Plan of action and milestones" means a document that identifies tasks to be accomplished. It details resources required to accomplish the elements of the plan, any milestones in meeting the tasks, and scheduled completion dates for the milestones, as defined in National Institute of Standards and Technology Special Publication 800-115 (32 CFR 170.21).

(b) . The Cybersecurity Maturity Model Certification (CMMC) is a framework for assessing a contractor's compliance with Framework applicable information security protections (see 32 CFR part 170).

(c) . The CMMC assessments will not duplicate efforts from any other comparable DoD assessment, except for rare circumstances Duplication when a reassessment may be necessary, for example, when there are indications of issues with cybersecurity and/or compliance with CMMC requirements.

(d) . The Contractor shall- Requirements

(1)(i) Have and maintain for the duration of the contract a current CMMC status at the following CMMC level, or higher: ____ for all information Contracting Officer insert: CMMC Level 1 (Self); CMMC Level 2 (Self); CMMC Level 2 (C3PAO); or CMMC Level 3 (DIBCAC) systems used in performance of the contract, task order, or delivery order that process, store, or transmit FCI or CUI; and

(ii) Consult 32 CFR 170.23 related to the flowdown of the CMMC requirements, and flow down the correct CMMC level to subcontracts and other contractual instruments;

(2) Only process, store, or transmit FCI or CUI on contractor information systems that have a CMMC status at the CMMC level required in paragraph (d)(1) of this clause, or higher;

(3) Complete on an annual basis, and maintain as current, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required in paragraph (d)(1) of this clause in the Supplier Performance Risk System (SPRS) ( ) for each CMMC UID applicable to each of the contractor information systems that process, store, or transmit FCI https://piee.eb.mil or CUI and that are used in performance of the contract;

(4) Ensure all subcontractors and suppliers complete prior to subcontract award, and maintain on an annual basis, an affirmation, by the affirming official (see 32 CFR 170.4), of continuous compliance with the requirements associated with the CMMC level required for the subcontract or other contractual instrument for each of the subcontractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the subcontract; and

(5) If the Contractor has a CMMC Status of Conditional, successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.

(e) . The Contractor shall- Reporting

(1) Submit to the Contracting Officer-

(i) The CMMC UID(s) issued by SPRS for contractor information systems that will process, store, or transmit FCI or CUI during performance of the contract; and

(ii) Any changes in the CMMC UIDs generated in SPRS throughout the life of the contract, task order, or delivery order, if applicable;

(2) Enter into SPRS the results of a current self-assessment for each CMMC UID, not covered by a C3PAO assessment or DIBCAC assessment, applicable to each of the contractor information systems that process, store, or transmit FCI or CUI and that are used in performance of the contract; and

(3) Complete in SPRS on an annual basis and maintain as current an affirmation of continuous compliance by the affirming official (see 32 CFR 170.4) for each self-assessment, C3PAO assessment, or DIBCAC assessment required under the contract in SPRS.

(f) . The Contractor shall- Subcontracts

(1) Insert the substance of this clause, including this paragraph (f) and excluding paragraph (e)(1), in subcontracts and other contractual instruments, including those for the acquisition of commercial products or commercial services, excluding commercially available off-the-shelf items, if the subcontract or other contractual instrument will contain a requirement to process, store, or transmit FCI or CUI; and

(2) Prior to awarding a subcontract or other contractual instrument, ensure that the subcontractor has a current CMMC certificate or current CMMC status at the CMMC level that is appropriate for the information that is being flowed down to the subcontractor based on the requirements at 32 CFR 170.23.

(End of clause)

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause--Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

N0016726Q1120 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003

(b) . The WAWF system provides the method to electronically process vendor payment requests and receiving Electronic invoicing reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003 , Electronic Submission of Payment Requests and Receiving Reports.

(c) . To access WAWF, the Contractor shall--WAWF access

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) . The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the WAWF training Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) . Document submissions may be via web entry, Electronic Data Interchange, or File WAWF methods of document submission Transfer Protocol.

(f) . The Contractor shall use the following information when submitting payment requests and receiving WAWF payment instructions reports in WAWF for this contract or task or delivery order:

(1) . The Contractor shall submit payment requests using the following document type(s):Document type

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

Invoice and Receiving Report (COMBO)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

N0016726Q1120 https://www.acquisition.gov/dfars/252.232-7003-electronic-submission-payment-requests-and-receiving-reports.#DFARS_252.232-7003

Pay Official DoDAAC N62825

Issue By DoDAAC N00167

Admin DoDAAC** N00167

Inspect By DoDAAC N00167

Ship To Code N00167

Ship From Code TBD

Mark For Code ____

Service Approver (DoDAAC) ____

Service Acceptor (DoDAAC) ____

Accept at Other DoDAAC ____

LPO DoDAAC ____

DCAA Auditor DoDAAC ____

Other DoDAAC(s) ____

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216- 7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

Technical questions Ademola Oriowo 301-503-0809 email ademola.m.oriowo.civ@us.navy.mil

Invoice questions TBD at Contract Award

NAVSEA Helpdesk at usn.ncr.sea-01.mbx.wawf-hq-functional-mail-box@us.navy.mil

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Addendum to 52.212-4, Contract Terms and Conditions - Commercial Products and Commercial Services

Contract Terms and Conditions Required To Implement Statutes or Executive Orders — Commercial Products and Commercial Services

Addendum to Contract Clauses

Contract Clauses

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1)

Apr 2026

52.223-5 Pollution Prevention and Right-to-Know Information. May 2024 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026-O0038) Feb 2026

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026- O0038)

Apr 2026

52.245-1 Government Property. Sep 2021 52.245-9 Use and Charges. Apr 2012 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.225-7012 Preference for Certain Domestic Commodities. Apr 2022 252.237-7010 Prohibition on Interrogation of Detainees by Contractor Personnel. Jan 2023 252.245-7003 Contractor Property Management System Administration Jan 2025 252.225-7048 Export-Controlled Items. Jun 2013 252.243-7001 Pricing of Contract Modifications. Dec 1991

FAR Clauses Incorporated by Full Text

52.252-2 Clauses Incorporated by Reference. (Feb 1998)

Clauses Incorporated By Reference (Feb 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html

(End of clause)

52.252-6 Authorized Deviations in Clauses. (Nov 2020)

Authorized Deviations in Clauses (Nov 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any clause with an authorized deviation is Defense Federal Acquisition Regulation (48 CFR 2) indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

G-242-H001 GOVERNMENT CONTRACTADMINISTRATION POINTS-OF-CONTACT AND

RESPONSIBILITIES (NAVSEA) (OCT 2023)

(Oct 2023)

G-242-H001 GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND RESPONSIBILITIES (NAVSEA) (OCT 2018)

(a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time.

(b) The contracting officer is the only person authorized to change this contract, or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract.

(c) The points of contact are as follows:

(i) The Procuring Contracting Officer (PCO) is:

Name: Barbaraann K Witz Address: 904 Corporate Lane, Chesapeake, VA 23220 Phone: (757) 402-1409 E-mail: barbaraann.k.witz.civ@us.navy.mil

(ii) The Contract Specialist is:

Name: Michael S Brodie Address: 904 Corporate Lane, Chesapeake, VA 23220 Phone: (757) 600-8579 E-mail: michael.s.brodie7.civ@us.navy.mil

(d) The Technical Point of Contact (TPOC) is the contracting officer’s representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables.

The Technical Point of Contact (TPOC) is:

Name: TBD At Contract Award

Phone:

E-mail:

(End of text)

E-246-H013 INSPECTION AND ACCEPTANCE OF DATA (NAVSEA) (OCT 2018) (Oct 2018)

Inspection and acceptance of all data shall be as specified on the attached Contract Data Requirements List(s), DD Form 1423.

(End of Text)

C-227-H006 DATA REQUIREMENTS (NAVSEA) (OCT 2018) (Oct 2018)

The data to be furnished hereunder shall be prepared in accordance with the Contract Data Requirements List, DD Form 1423, Exhibit A, attached hereto.

(End of Text)

List of Contract Documents, Exhibits, or Attachments

Solicitation Provisions

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026- O0038)

Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7005 Representation Relating to Compensation of Former DoD Officials. Sep 2022 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls. Oct 2016 252.204-7024 Notice on the Use of the Supplier Performance Risk System. Mar 2023 252.225-7055 Representation Regarding Business Operations with the Maduro Regime. May 2022

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region- Representation.

Jun 2023

252.239-7017 Notice of Supply Chain Risk. Dec 2022

DFARS Clauses Incorporated by Full Text

252.204-7017 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services-Representation.

(May 2021)

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) . "Covered defense telecommunications equipment or services," "covered mission," "critical technology," and "substantial or Definitions essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 (Pub. L. 115-91) prohibits agencies from Prohibition procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) . The Offeror shall review the list of excluded parties in the System for Award Management (SAM) at for Procedures https://www.sam.gov entities that are excluded when providing any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) . If in its annual representations and certifications in SAM the Offeror has represented in paragraph (c) of the provision at Representation 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) . If the Offeror has represented in paragraph (d) of this provision that it "will provide covered defense telecommunications Disclosures equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

Addendum to 52.212-1, Instructions to Offerors - Commercial Products and Commercial Services

Evaluation - Commercial Products and Commercial Services

FAR Clauses Incorporated by Full Text

52.212-2 Evaluation-Commercial Products and Commercial Services. (Deviation 2026-O0038) (Feb 2026)

Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)

EVALUATION FACTORS FOR AWARD

The Government has determined that an award will be made to the responsible Quoter whose technically acceptable quote is considered to be the most advantageous to the Government, past performance and price considered

a. Technical Acceptability: All quotations will be evaluated on a pass/fail basis to determine if the proposed product(s) clearly meet the technical requirements outlined in the solicitation's Performance Work Statement / salient characteristics. Quotations that do not meet the minimum requirements detailed in the solicitation will be rated "Unacceptable" and will not be considered further.

b. Past Performance: The Government reserves the right to consider past performance information for the lowest-priced, technically acceptable vendor prior to award. The Government may use information available in the Supplier Performance Risk System (SPRS) and other sources. A neutral past performance rating will be assigned if no relevant past performance information is available.

c. Price: The price of all technically acceptable quotations will be evaluated for reasonableness. Award will be made to the quoter whose technically acceptable quote is considered to be the most advantageous to the Government, past performance and price considered.

d. (c) Options. (if applicable) The Government will evaluate quotes for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced.

Evaluation of options shall not obligate the Government to exercise the option(s).

Quoters responding to this solicitation are advised that, prior to award, the government may request quoters to submit information/data to support price reasonableness such as copies of paid invoices for the same or similar items, sales history for the same or similar items, price list with effective date and/or copies of catalog pages along with any applicable discounts.

The Government reserves the right to request that the awardee reduce its total price, or adjust CLIN prices with no change to total price, in order to reduce administrative costs and avoid unnecessary burdens for the agency pursuant to FAR 12.201-1(d).

QUESTIONS: Any questions in relation to this solicitation shall be submitted via e-mail to Michael Brodie at michael.s.brodie7.civ@us.navy.mil . All questions received will be answered in an amendment to the solicitation.

The cut-off date for questions is 12PM on 24-Jun-2026.

(End of text) mailto:michael.s.brodie7.civ@us.navy.mil

Addendum to Evaluation - Commercial Product and Commercial Services

Offeror Representations and Certifications - Commercial Products and Commercial Services

Addendum to Solicitation Provisions

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions.

Sep 2024

52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation.

Jan 2017

52.204-7 System for Award Management-Registration. (Deviation 2026-O0038) Feb 2026 52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026- O0038)

Feb 2026

FAR Clauses Incorporated by Full Text

52.252-1 Solicitation Provisions Incorporated by Reference. (Feb 1998)

Solicitation Provisions Incorporated by Reference (Feb 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/far-overhaul-part-52 https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html

(End of provision)

52.252-5 Authorized Deviations in Provisions. (Nov 2020)

Authorized Deviations in Provisions (Nov 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any provision with an authorized deviation is indicatedDefense Federal Acquisition Regulation (48 CFR 2) by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

DFARS Clauses Incorporated by Full Text

252.204-7025 Notice of Cybersecurity Maturity Model Certification Level Requirements. (Nov 2025)

NOTICE OF CYBERSECURITY MATURITY MODEL CERTIFICATION LEVEL REQUIREMENTS (NOV 2025)

(a) . As used in this provision, "controlled unclassified information (CUI)," "current," "Cybersecurity Maturity Model CertificationDefinitions (CMMC) status," "Cybersecurity Maturity Model Certification unique identifier (CMMC UID)," "Federal contract information (FCI)", and "plan of action and milestones" have the meaning given in the Defense Federal Acquisition Regulation Supplement 252.204-7021, Contractor Compliance With the Cybersecurity Maturity Model Certification Level Requirements, clause of this solicitation.

(b)(1) Cybersecurity Maturity Model Certification (CMMC) level. The CMMC level required by this solicitation is: CMMC Level 2 (Self).

This CMMC level, or higher (see 32 CFR part 170), is required prior to award for each contractor information system that will process, store, or transmit Federal contract information (FCI) or controlled unclassified information (CUI) during performance of the contract.

(2) The Offeror will not be eligible for award of a contract, task order, or delivery order resulting from this solicitation if the Offeror does not have, for each of the contractor information systems that will process, store, or transmit FCI or CUI and that will be used in performance of a contract resulting from this solicitation-

(i) The current CMMC status entered in the Supplier Performance Risk System (SPRS) (https://piee.eb.mil) at the CMMC level required by paragraph (b)(1) of this provision; and

(ii) A current affirmation of continuous compliance with the security requirements identified at 32 CFR part 170 in SPRS.

(c) Plan of action and milestones. If the Offeror has a CMMC Status of Conditional, the Offeror shall successfully close out a valid plan of action and milestones (32 CFR 170.21) to achieve a CMMC Status of Final.

(d) CMMC unique identifiers. The Offeror shall provide, in the proposal, the CMMC unique identifier(s) (CMMC UIDs) issued by SPRS for each contractor information system that will process, store, or transmit FCI or CUI during performance of a contract, task order, or delivery order resulting from this solicitation. The Offeror also shall update the list when new CMMC UIDs are generated in SPRS. The CMMC UIDs are provided in SPRS after the Offeror enters the results of self-assessment(s) for each such information system.

(End of provision)