Solicitation M0068124Q0035.pdf

SEE ADDENDUM

(No Collect Calls)

M0068124Q0035 24-Jun-2024

b. TELEPHONE NUMBER

760-725-8450

8. OFFER DUE DATE/LOCAL TIME

05:00 PM 07 Jul 2024

5. SOLICITATION NUMBER 6. SOLICITATION ISSUE DATE

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA – FAR (48 CFR) 53.212

(TYPE OR PRINT)

(SIGNATURE OF CONTRACTING OFFICER)

ADDENDA ARE

26. TOTAL AWARD AMOUNT (For Gov t. Use Only )

23.

CODE 10. THIS ACQUISITION IS

SUCH ADDRESS IN OFFER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT

BELOW IS CHECKED

TELEPHONE NO.

M006819. ISSUED BY

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a. UNLESS BLOCK

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME

GAVIN M. UNTALAN

2. CONTRACT NO. 3. AWARD/EFFECTIVE DATE 4. ORDER NUMBER

(TYPE OR PRINT)

30b. NAME AND TITLE OF SIGNER 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a.UNITED STATES OF AMERICA

0 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED.

25. ACCOUNTING AND APPROPRIATION DATA

1. REQUISITION NUMBER

20.

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

M010794553323

ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

. YOUR OFFER ON SOLICITATION

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

% FOR:SET ASIDE:UNRESTRICTED OR X

SMALL BUSINESS

17a.CONTRACTOR/ CODE FACILITY

OFFEROR CODE

REGIONAL CONTRACTING OFFICE-MCIWEST

BLDG 22180 REGIONAL CONTRACTS

CAMP PENDLETON CA 92055-5027

18a. PAYMENT WILL BE MADE BY CODE

RATED ORDER UNDER

DPAS (15 CFR 700)

13a. THIS CONTRACT IS A

13b. RATING

CODE15. DELIVER TO CODE M01079 16. ADMINISTERED BY

12. DISCOUNT TERMS11. DELIVERY FOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

X SEE SCHEDULE

14. METHOD OF SOLICITATION

RFQ IFB RFPX

3MAW

ROBERT MEYER2

3D MAW MCAS MIRAMAR

BLDG #7133 BAYDOOR 2. MCAS MIRAMAR

SAN DIEGO CA 92145-2038

TEL: 858-577-7309 FAX:

FAX:

TEL: SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

8(A)

HUBZONE SMALL

BUSINESS

SIZE STANDARD:

1,000

NAICS:

339992

X

OFFER DATED

29. AWARD OF CONTRACT: REF.

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

EMAIL:

TEL:

31c. DATE SIGNED

SEE SCHEDULE

SCHEDULE OF SUPPLIES/ SERVICESITEM NO. QUANTITY UNIT UNIT PRICE AMOUNT

24.22.21.19.

X

WOMEN-OWNED SMALL BUSINESS (WOSB)

ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

EDWOSB

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

(CONTINUED)

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED: ______________________________________________________

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f . TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

37. CHECK NUMBER

FINALPARTIALCOMPLETE

36. PAYMENT35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER

FINAL

33. SHIP NUMBER

PARTIAL

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

STANDARD FORM 1449 (REV. 2/2012) BACK

Prescribed by GSA – FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE SCHEDULE

20.

SCHEDULE OF SUPPLIES/ SERVICES

21.

QUANTITY UNIT

22. 23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

M0068124Q0035

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 5 Each Professional Clarinet

FFP

Description: Buffet Crampon, Model R13 Greenline (Bb) Body: Green line composite material with a poly-cylindrical .574 inch bore Keywork: Boehm (French) system keywork with 17 keys Keys: Silver plated Tone holes: Undercut Springs: Blue steel Pads: Double skin bladder style Bell: Green line composite material and have a silver plated bell ring Barrel: Cylindrical and 66 millimeters in length Must include standard manufacturer hard shell case.

Manf Part Number: BC1131G-2-0 FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

PURCHASE REQUEST NUMBER: M010794553323

PSC CD: 7710

NET AMT

0002 2 Each Professional Flugelhorn

FFP

Description: Yamaha, Model YFH-8310ZII (Bb) Body: Yellow brass body, a 6-inch diameter yellow brass one piece bell Must include an adjustable “Malone Pipe” leadpipe, tapered between the leadpipe and valve casing Brass barrel adjustable leadpipe screw Bore: .413 inch bore Include first and third valve slide triggers, monel pistons Finish: Clear epoxy lacquer over yellow brass Must include standard manufacturer hard shell case Manf Part Number: YFH-8310ZII FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0003 1 Each Professional Bass Trombone

FFP

Description: Edwards, Model B454-CR-E Outer slide: Yellow brass with nickel sleeves and crook Overall construction: Nickel silver and yellow brass Diameter: 9.5 inch 22 gauge yellow brass bell with soldered rim .562/.578 inch dual bore handslide Open wrap F and Gb attachments with independent conventional rotor valves Finish: Clear lacquer Must include three interchangeable leadpipes Tuning slide: Single radius taper and be made of yellow brass Must include standard manufacturer hard shell case Manf Part Number: B454-CR-E FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0004 1 Each Professional Bass Trombone

FFP

Description: Bach, Model 50BS Overall construction: Silver plated yellow brass Hand hammered one piece 9.5 inch diameter silver plated yellow brass bell Closed wrap F and Eb attachments with a dependent trigger Conventional style rotors with mechanical linkage Handslide must have a .562 inch bore Silver plated yellow brass outer slide and chrome plated nickel silver inner slide Must include standard manufacturer hard shell case Manf Part Number: 50BS FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0005 2 Each Professional Sousaphone

FFP

Description: Conn, Model 20KSPW in key of BBb Overall construction: Silver plated yellow brass Must have three offset short action nickel plated pistons Bore: .743 inch Exterior: Entirely silver plate finish Bell: 26 inches in diameter Must include standard manufacturer hard shell case with wheels Manf Part Number: 20KSPW

FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0006 2 Each Professional Tuba

FFP

Description: Miraphone, Model 1291-5V Yellow brass 4/4 size Five total valves Four front pistons and one rotary Must be in the key of ‘BBb’ Finish: Clear lacquer

18.5 inch diameter upright bell Bore: .835 inches Leadpipe: Nickel silver Manf Part Number: 1291-5V FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0007 2 Each Tuba Case - MTS 1207V

FFP

Tuba Hard Shell Case for Miraphone, Model 1291-5V: MTS, Model 1207V Description: Hard shell case with ½ inch plywood lined with foam to hold and protect Miraphone 1291-5V Tuba Must fit and hold the tuba securely with padding sufficient to prevent damage during normal handling Exterior shell must protect against protrusion, crushing, or other damage Exterior must have wheels, latches, and two handles to facilitate vertical or horizontal lift.

Manf Part Number: 1207V FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0008 1 Each Professional Acoustic Guitar

FFP

Description: Taylor, Model 314-CE Right-handed professional acoustic guitar Body: Sitka Spruce Neck: Tropical Mahogany Fretboard: West African Crelicam Ebony with Italian Acrylic Gemstone inlays Must have a black pickguard, gloss top finish and satin side finish Must include an Expression System 2 electronic pickup Venetian cutaway V-Class bracing 2-piece no wedge back configuration

25.5 inch scale length Tusq Nut and Micarta Saddle West African Crelicam Ebony Bridge and Bridge Pins Must include standard manufacturer hard shell case Manf Part Number: 314-CE FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0009 1 Each Professional Electric Bass Guitar

FFP

Description: Sadowsky, Model SML24VJ502 ASH FR Right handed orientation body with Sadowsky Doublecut shape Ocean blue color and transparent satin finish Body: Swamp Ash Neck: Maple Neck joint construction: Bolt on, the neck must have a 12 inch radius, 24 nickel silver frets, scale length of 34 inches Must have 5 strings and the nut material must be Tedor Neck and bridge pickup must be Sadowsky passive stacked J single coil Must have volume, reverse blend, tone, and 2-band EQ knobs Must include standard manufacturer hard shell case Manf Part Number: SML24VJ502 ASH FR FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0010 1 Each Professional Guitar Amplifier

FFP

Description: Guitar Amplifier: Mesa Boogie, Model 1.MK7.AB.CO with 1 x 12 inch Celestion Custom 90 speaker 3 channels with 3 selectable modes 5-band graphic EQ Independent Gain, Treble, Mid, Bass, Presence, and Master controls per channel Total power: 90 watts One ¼ inch inputs Four ¼ inch outputs Effects loops capability Include 6 button foot switch Constructed of black vinyl with Baltic birch cabinet Must have midi in/out/thru and USB connectivity capability Manf Part Number: 1.MK7.AB.CO FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0011 1 Each ATA Flight Case for Model 1.MK7.AB.CO

FFP

Guitar Amplifier Case for Mesa Boogie, Model 1.MK7.AB.CO Description:Guitar Amplifier Case Must be built to specification to fit the Mesa/Boogie Mark VII Guitar Amplifier Meet ATA specifications for protection: ½ inch plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom Manf Part Number: Not applicable (custom built) FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0012 20 Each Preamplifier Tube: Mesa Boogie, 12AX7

FFP

Preamplifier Tube: Mesa Boogie, Model 12AX7 Description: High gain preamplifier tube designed for and compatible with Mesa/Boogie Model 1.MK7.AB.CO.

Manf Part Number: 750150F FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0013 8 Each Power Tube: Mesa Boogie, EL34 STR

FFP

Power Tube: Mesa Boogie, Model EL34 STR 446 Description: Power tube designed for and compatible with Mesa/Boogie Model

1.MK7.AB.CO

Manf Part Number: 750625D FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0014 8 Each Power Tube: Mesa Boogie, 6L6 STR 448

FFP

Power Tube: Mesa Boogie, Model 6L6 STR 448 Description: Power tube designed for and compatible with Mesa Boogie Model

1.MK7.AB.CO

Manf Part Number: 750635D FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0015 4 Each Rectifier Tube: Mesa Boogie, Model 5U4GB

FFP

Rectifier Tube: Mesa Boogie, Model 5U4GB Description: Power tube designed for and compatible with Mesa Boogie Model

1.MK7.AB.CO

Manf Part Number: 750541F FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0016 1 Each Keyboard Amplifier: Roland, Model KC-400

FFP

Keyboard Amplifier: Roland, Model KC-400 Description: Professional Keyboard Amplifier with one 12 inch woofer and one horn tweeter 4 channels with 3-band EQ Stereo link capability Total power: 150 watts Eight ¼ inch (L/mono, R) inputs One XLR input 1 ¼ inch stereo link input 2 RCA inputs One 1/8 inch TRS input.

2 ¼ inch (L/mono, R) 1 ¼ inch stereo link output 1 ¼ inch headphone output 1 ¼ inch sub output Overall height 18.56 inch, width 19.31 inch, depth 15.18 inch Manf Part Number: KC-400 FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0017 1 Each ATA Flight Case, Roland KC-400

FFP

Keyboard Amplifier Case for Roland KC-400 Keyboard Amplifier Description: Keyboard Amplifier Case Must be built to specification to fit the Roland KC-400 Keyboard Amplifier Meet ATA specifications for protection to include ½ inch plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom Manf Part Number: Not applicable (custom built) FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0018 1 Each Bass Amplifier: Gallien Krueger, Legacy

FFP

Bass Amplifier: Gallien Krueger, Model Legacy 212 Description: Professional Bass Amplifier 2 x 12 inch 800W Bass Combo Amplifier with Class D Output Stage Preamp with Overdrive 4-band EQ 1 ¼ inch input 1 1/8 inch input 1 speakon output One XLR Output 1 1/8 inch headphone output FX Loop Foot-switchable Overdrive with Tone control Overdrive circuit with Drive, Level, and Edge controls 2 x 12-inch neodymium speakers.

Total power: 800 watts Must have two internal cooling fans and rear air vent Manf Part Number: 303-1050-B FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

0019 1 Each ATA Flight Case for Gallien Krueger

FFP

Bass Amplifier Case for Gallien Krueger Legacy 212 Description: Bass Amplifier Case Must be built to specification to fit the Gallien Krueger Legacy 212 Combo Amplifier Meet ATA specifications for protection to include ½ inch plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom.

Manf Part Number: Not applicable (custom built)

FOB: Origin (Shipping Point)

BRAND NAME/SOLE SOURCE: BN

MILSTRIP: M010794553323

Shipping

FFP

Standard shipping to include tracking and insured to the appropriate value of each item.

FOB: Origin (Shipping Point)

MILSTRIP: M010794553323

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 0002 Destination Government Destination Government 0003 Destination Government Destination Government 0004 Destination Government Destination Government 0005 Destination Government Destination Government 0006 Destination Government Destination Government 0007 Destination Government Destination Government 0008 Destination Government Destination Government 0009 Destination Government Destination Government 0010 Destination Government Destination Government 0011 Destination Government Destination Government 0012 Destination Government Destination Government 0013 Destination Government Destination Government 0014 Destination Government Destination Government 0015 Destination Government Destination Government 0016 Destination Government Destination Government 0017 Destination Government Destination Government 0018 Destination Government Destination Government 0019 Destination Government Destination Government 0020 Destination Government Destination Government

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS DODAAC /

CAGE

0001 90 dys. ADC 5 3MAW

ROBERT MEYER2

3D MAW MCAS MIRAMAR

BLDG #7133 BAYDOOR 2. MCAS

MIRAMAR

SAN DIEGO CA 92145-2038

858-577-7309 FOB: Origin (Shipping Point)

M01079

0002 90 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0003 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0004 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0005 90 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0006 90 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0007 90 dys. ADC 2 (SAME AS PREVIOUS LOCATION)

0008 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0009 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0010 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0011 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0012 90 dys. ADC 20 (SAME AS PREVIOUS LOCATION)

0013 90 dys. ADC 8 (SAME AS PREVIOUS LOCATION)

0014 90 dys. ADC 8 (SAME AS PREVIOUS LOCATION)

0015 90 dys. ADC 4 (SAME AS PREVIOUS LOCATION)

0016 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0017 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0018 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0019 90 dys. ADC 1 (SAME AS PREVIOUS LOCATION)

0020 90 dys. ADC (SAME AS PREVIOUS LOCATION)

CLAUSES INCORPORATED BY REFERENCE

52.204-7 System for Award Management OCT 2018 52.204-13 System for Award Management Maintenance OCT 2018 52.204-16 Commercial and Government Entity Code Reporting AUG 2020 52.204-18 Commercial and Government Entity Code Maintenance AUG 2020

52.212-1 Instructions to Offerors--Commercial Products and Commercial Services

SEP 2023

52.212-4 Contract Terms and Conditions--Commercial Products and Commercial Services

NOV 2023

52.247-29 F.O.B. Origin FEB 2006 252.203-7000 Requirements Relating to Compensation of Former DoD

Officials

SEP 2011

252.203-7002 Requirement to Inform Employees of Whistleblower Rights DEC 2022 252.203-7005 Representation Relating to Compensation of Former DoD

Officials

SEP 2022

252.204-7015 Notice of Authorized Disclosure of Information for Litigation Support

JAN 2023

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services

JAN 2023

252.211-7008 Use of Government-Assigned Serial Numbers SEP 2010 252.223-7008 Prohibition of Hexavalent Chromium JAN 2023 252.225-7001 Buy American and Balance of Payments Program FEB 2024 252.225-7002 Qualifying Country Sources As Subcontractors MAR 2022 252.232-7003 Electronic Submission of Payment Requests and Receiving

Reports

DEC 2018

252.232-7010 Levies on Contract Payments DEC 2006 252.243-7001 Pricing Of Contract Modifications DEC 1991 252.244-7000 Subcontracts for Commercial Products or Commercial

Services

NOV 2023

252.246-7008 Sources of Electronic Parts JAN 2023

CLAUSES INCORPORATED BY FULL TEXT

52.204-24 REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO

SURVEILLANCE SERVICES OR EQUIPMENT (NOV 2021)

The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it "does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument" in paragraph (c)(1) in the provision at 52.204-26, Covered Telecommunications Equipment or Services-- Representation, or in paragraph (v)(2)(i) of the provision at 52.212-3, Offeror Representations and Certifications- Commercial Products and Commercial Services. The Offeror shall not complete the representation in paragraph (d)(2) of this provision if the Offeror has represented that it "does not use covered telecommunications equipment or services, or any equipment, system, or service that uses covered telecommunications equipment or services" in paragraph (c)(2) of the provision at 52.204-26, or in paragraph (v)(2)(ii) of the provision at 52.212-3.

(a) Definitions. As used in this provision-

Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

(b) Prohibition.

(1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L.

115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to--

(i) Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or

(ii) Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles.

(c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for "covered telecommunications equipment or services."

(d) Representations. The Offeror represents that--

(1) It [ ___ ] will, [ ___ ] will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds "will" in paragraph (d)(1) of this section; and

(2) After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that--

It [ ___ ] does, [ ___ ] does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds "does" in paragraph (d)(2) of this section.

(e) Disclosures.

(1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded "will" in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision.

(2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded "does" in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer:

(i) For covered equipment--

(A) The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known);

(B) A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and

(C) Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(ii) For covered services--

(A) If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or

(B) If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision.

(End of provision)

52.212-1 ADDENDUM

1. SUBMISSION OF QUOTATIONS: Quotations must be received no later than the date stated in box 8, page 1 of this solicitation. Quotation shall be submitted via email. Please respond to Capt Gavin Untalan, gavin.untalan@usmc.mil directly with quotation.

2. QUESTIONS: Questions shall be submitted by email no later than 10 days after issuance of the solicitation to the email address listed below. No phone questions will be accepted. The deadline is necessary to ensure timely award and the Government may, in its sole discretion, choose not to respond to questions received after the deadline. All questions will be reviewed and responded to by an amendment to the solicitation. Email questions to Capt Gavin Untalan, gavin.untalan@usmc.mil.

3. PERIOD OF ACCEPTANCE OF OFFERORS: The pricing terms and conditions of the proposal shall be valid for 90 days unless a longer time is stated otherwise in the quote.

4. SAM. Offerors must be registered in the System for Award Management (SAM) database. Information in SAM should be current, if not – completion of the attached FAR Provision 52.212-3, Certifications and Representations is required with quotation. Information on registering in SAM may be obtained from www.sam.gov or calling 866- 606-8220. Registration in SAM is free.

5. WIDE-AREA WORKFLOW – RECEIPT AND ACCEPTANCE. As a condition of receipt of any resulting order, the Contractor agrees to implement the Department of Defense (DOD) web-based application. Information on registering in WAWF/iRAPT may be obtained from https://wawf.eb.mil/xhtml/unauth/registration/notice.xhtml or calling 866-618-5988. Registration in WAWF/iRAPT is free.

6. COMPLETE RESPONSIVE QUOTE: The Government will award a Firm Fixed Price Contract resulting from this solicitation to the responsible quoter whose quotation conforming to the solicitation. A complete responsive quote must be received for consideration. A complete quote is (a) - (c) as follows:

(a) Technical Acceptability— must meet the following:

i) Salient characteristics listed below in 52.212-2, Evaluation and Technical

ii) Brand Name

(b) Price – Note Price on CLINs on this SF 1449 Solicitation

(c) Solicitation Provisions – Completion of all solicitation provisions, as required. If information as “none” or “not applicable”, state. Note: Not required to complete 52.212-3 if registered in SAM.gov.

-52.204-24 -252.204-7017

52.212-2 EVALUATION--COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (NOV 2021)

(a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

(i) technical capability of the item offered to meet the Government requirement

(ii) price

(b) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.212-2 ADDENDUM

Regional Contracting Office, Camp Pendleton, CA, is issuing Request For Quotation (RFQ) to procure brand name band instruments. This procurement is conducted in accordance with FAR Part 12 (Acquisition of Commercial Items) utilizing FAR Part 13 (Simplified Acquistion Procedures).

Incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-05, effective February 23, 2024 and DFARS Change Notice (DCN) 04/25/2024, effective April 25, 2024.

BASIS FOR AWARD. Award will be determined on price and technical acceptability of meeting the brand name specifications or on the capability of the quoter to meet or exceed the specifications and pricing determined to be fair and reasonable. The resulting award will be a Firm-Fixed Priced purchase order, all or none, to provide brand name band instruments.

EVALUATION. The Government intends to make a single Firm Fixed Price award to satisfy this requirement.

Award will be made on the initial evaluation of quotes received in response to this RFQ. Therefore, quoters are cautioned to ensure that initial quotes contain your best terms from a technical and price standpoint. The following factors will be used to evaluate quotes:

1. TECHNICAL: Minimum specifications:

Clarinet: Buffet Crampon, Model R13 Greenline Manf Part Number: BC1131G-2-0 Qty: 5 Description: Professional B flat (Bb) Clarinet Body: Green line composite material with a poly-cylindrical .574 inch bore Keywork: Boehm (French) system keywork with 17 keys Keys: Silver plated Tone holes: Undercut Springs: Blue steel Pads: Double skin bladder style Bell: Green line composite material and have a silver plated bell ring Barrel: Cylindrical and 66 millimeters in length Must include standard manufacturer hard shell case.

Flugelhorn: Yamaha, Model YFH-8310ZII Manf Part Number: YFH-8310ZII Qty: 2 Description: Professional Bb Flugelhorn in the key of Bb Body: Yellow brass body, a 6-inch diameter yellow brass one piece bell Must include an adjustable “Malone Pipe” leadpipe, tapered between the leadpipe and valve casing Brass barrel adjustable leadpipe screw Bore: .413 inch bore Include first and third valve slide triggers, monel pistons Finish: Clear epoxy lacquer over yellow brass Must include standard manufacturer hard shell case

Bass Trombone: Edwards, Model B454-CR-E Manf Part Number: B454-CR-E Qty: 1 Description: Professional Bass Trombone Outer slide: Yellow brass with nickel sleeves and crook Overall construction: Nickel silver and yellow brass Diameter: 9.5 inch 22 gauge yellow brass bell with soldered rim .562/.578 inch dual bore handslide Open wrap F and Gb attachments with independent conventional rotor valves Finish: Clear lacquer Must include three interchangeable leadpipes Tuning slide: Single radius taper and be made of yellow brass Must include standard manufacturer hard shell case

Bass Trombone: Bach, Model 50BS Manf Part Number: 50BS Qty: 1 Description: Professional Bass Trombone Overall construction: Silver plated yellow brass Hand hammered one piece 9.5 inch diameter silver plated yellow brass bell

Closed wrap F and Eb attachments with a dependent trigger Conventional style rotors with mechanical linkage Handslide must have a .562 inch bore Silver plated yellow brass outer slide and chrome plated nickel silver inner slide Must include standard manufacturer hard shell case

Sousaphone: Conn, Model 20KSPW Manf Part Number: 20KSPW Qty: 2 Description: Sousaphone in key of BBb Overall construction: Silver plated yellow brass Must have three offset short action nickel plated pistons Bore: .743 inch Exterior: Entirely silver plate finish Bell: 26 inches in diameter Must include standard manufacturer hard shell case with wheels

Tuba: Miraphone, Model 1291-5V Manf Part Number: 1291-5V Qty: 2 Description: Professional BBb Tuba Yellow brass 4/4 size Five total valves Four front pistons and one rotary Must be in the key of ‘BBb’ Finish: Clear lacquer

18.5 inch diameter upright bell Bore: .835 inches Leadpipe: Nickel silver

Tuba Hard Shell Case for Miraphone, Model 1291-5V: MTS, Model 1207V Manf Part Number: 1207V Qty: 2 Description: Hard shell case with ½ in. plywood lined with foam to hold and protect Miraphone 1291-5V Tuba Must fit and hold the tuba securely with padding sufficient to prevent damage during normal handling Exterior shell must protect against protrusion, crushing, or other damage Exterior must have wheels, latches, and two handles to facilitate vertical or horizontal lift.

Acoustic Guitar: Taylor, Model 314-CE Manf Part Number: 314-CE Qty: 1 Description: Right-handed professional acoustic guitar Body: Sitka Spruce Neck: Tropical Mahogany Fretboard: West African Crelicam Ebony with Italian Acrylic Gemstone inlays Must have a black pickguard, gloss top finish and satin side finish Must include an Expression System 2 electronic pickup Venetian cutaway V-Class bracing 2-piece no wedge back configuration

25.5 inch scale length Tusq Nut and Micarta Saddle West African Crelicam Ebony Bridge and Bridge Pins Must include standard manufacturer hard shell case

Electric Bass Guitar: Sadowsky, Model SML24VJ502 ASH FR Manf Part Number: SML24VJ502 ASH FR Qty: 1 Description: Professional Electric Bass Guitar Right handed orientation body with Sadowsky Doublecut shape Ocean blue color and transparent satin finish Body: Swamp Ash Neck: Maple Neck joint construction: Bolt on, the neck must have a 12 inch radius, 24 nickel silver frets, scale length of 34 inches Must have 5 strings and the nut material must be Tedor Neck and bridge pickup must be Sadowsky passive stacked J single coil Must have volume, reverse blend, tone, and 2-band EQ knobs Must include standard manufacturer hard shell case

Guitar Amplifier: Mesa Boogie, Model 1.MK7.AB.CO Manf Part Number: 1.MK7.AB.CO Qty: 1 Description: Professional Guitar Amplifier with 1 x 12 inch Celestion Custom 90 speaker 3 channels with 3 selectable modes 5-band graphic EQ Independent Gain, Treble, Mid, Bass, Presence, and Master controls per channel Total power: 90 watts One ¼ inch inputs Four ¼ inch outputs Effects loops capability Include 6 button foot switch Constructed of black vinyl with Baltic birch cabinet Must have midi in/out/thru and USB connectivity capability

Guitar Amplifier Case for Mesa Boogie, Model 1.MK7.AB.CO Manf Part Number: Not applicable (custom built) Qty: 1 Description: Guitar Amplifier Case Must be built to specification to fit the Mesa/Boogie Mark VII Guitar Amplifier Meet ATA specifications for protection: ½ in. plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom

Preamplifier Tube: Mesa Boogie, Model 12AX7 Manf Part Number: 750150F Qty: 20 Description: High gain preamplifier tube designed for and compatible with Mesa/Boogie Model 1.MK7.AB.CO.

Power Tube: Mesa Boogie, Model EL34 STR 446 Manf Part Number: 750625D Qty: 8 Description: Power tube designed for and compatible with Mesa/Boogie Model 1.MK7.AB.CO

Power Tube: Mesa Boogie, Model 6L6 STR 448 Manf Part Number: 750635D Qty: 8 Description: Power tube designed for and compatible with Mesa/Boogie Model 1.MK7.AB.CO

Rectifier Tube: Mesa/Boogie, Model 5U4GB

Manf Part Number: 750541F Qty: 4 Description: Power tube designed for and compatible with Mesa/Boogie Model 1.MK7.AB.CO

Keyboard Amplifier: Roland, Model KC-400 Manf Part Number: KC-400 Qty: 1 Description: Professional Keyboard Amplifier with one 12 inch woofer and one horn tweeter 4 channels with 3-band EQ Stereo link capability Total power: 150 watts Eight ¼” (L/mono, R) inputs One XLR input 1 ¼” stereo link input 2 RCA inputs One 1/8” TRS input.

2 ¼” (L/mono, R) 1 ¼” stereo link output 1 ¼” headphone output 1 ¼” sub output Overall height 18.56”, width 19.31”, depth 15.18”

Keyboard Amplifier Case for Roland KC-400 Keyboard Amplifier Manf Part Number: Not applicable (custom built) Qty: 1 Description: Keyboard Amplifier Case Must be built to specification to fit the Roland KC-400 Keyboard Amplifier Meet ATA specifications for protection to include ½ in. plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom

Bass Amplifier: Gallien Krueger, Model Legacy 212 Manf Part Number: 303-1050-B Qty: 1 Description: Professional Bass Amplifier 2 x 12" 800W Bass Combo Amplifier with Class D Output Stage Preamp with Overdrive 4-band EQ 1 ¼” input 1 1/8” input 1 speakon output One XLR Output 1 1/8” headphone output FX Loop Foot-switchable Overdrive with Tone control Overdrive circuit with Drive, Level, and Edge controls 2 x 12-inch neodymium speakers.

Total power: 800 watts Must have two internal cooling fans and rear air vent

Bass Amplifier Case for Gallien Krueger Legacy 212 Manf Part Number: Not applicable (custom built) Qty: 1 Description: Bass Amplifier Case Must be built to specification to fit the Gallien Krueger Legacy 212 Combo Amplifier

Meet ATA specifications for protection to include ½ in. plywood lined with foam Must have lift off top with handles on two opposing sides Caster wheels on the bottom.

Shipping Standard shipping to include tracking and insured to the appropriate value of each item. Required Delivery Date (RDD) for shipment is no later than 12 months from contract award in order to account for manufacturer delays and/or backorders on items.

Rating will be in accordance with:

RATING

DESCRIPTION

ACCEPTABLE Quotation meets the requirements of the solicitation.

UNACCEPTABLE Quotation does not meet the requirements of the solicitation.

2. PRICE: All quotes must be the Contractor’s Best Pricing. Price analysis shall be used to verify that the overall price offered is fair and reasonable. The Offeror shall input the unit price and total in all the line items present in the SF1449. The total evaluated price is calculated using the prices proposed for all line items.

3. DELIVERY OR PAST PERFORMANCE:

Delivery will be determined upon award of contract.

4. EVALUATION PROCESS: The evaluation will proceed as follows:

• Step 1 – The Contracting Officer will review offers to determine if each offeror has submitted a responsive quote. To be responsive, quoters must submit all the documentation identified above, by the RFQ close date/time shown in block 8 of the SF1449. A quote may be eliminated from the competition without further consideration if it does not meet the responsiveness requirements.

• Step 2 – Quotes that have been determined responsive will then be evaluated and receive a rating of Acceptable or Unacceptable based on the technical acceptability criteria above. Offerors must receive an “Acceptable” rating on each technical element to be determined technically “Acceptable”.

• Step 3 – Remaining technically acceptable quotes will be ranked in in order from lowest to highest based on submitted CLIN prices. All CLIN prices will be evaluated and determined to be fair and reasonable using one or more of the techniques set forth in FAR 15.404-1(b)(2). The assessment of price will consider the overall quoted price. Quotes containing only partial pricing will not be evaluated.

• Step 4 – The three lowest price, technically acceptable quotes will be reviewed for delivery acceptability in accordance with terms specified above. Those Offerors that do quote delivery or period of performance as requested will not be evaluated.

• Step 5 – If the three lowest price, technically acceptable quotes are judged to have an “acceptable” delivery, those quotes represent the best value for the government and the evaluation process stops at this point. Award shall be made to the lowest quoter without further consideration of any other quotes. If the Government cannot assess acceptable delivery among the initial three lowest price, technically acceptable quotes, it may (at the Contracting Officer’s discretion) conduct an assessment on the next higher priced quotes until one or more selections can be made.

The Government reserves the right to award no contract, depending on the quality of the quotes submitted and availability of funds for the requirement. The Government intends to evaluate quotes and award a single contract without requesting or accepting revised quotes. Therefore, the Offerors will be advised that their initial quote should contain the most favorable terms and reflect its best possible performance potential. The Government does reserve the right to clarify aspects of the quotes and hold discussions.

52.212-3 OFFEROR REPRESENTATIONS AND CERTIFICATIONS--COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (MAY 2024)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision --

"Covered telecommunications equipment or services" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

"Forced or indentured child labor" means all work or service-

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

"Highest-level owner" means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

"Immediate owner" means an entity, other than the offeror, that has direct control of the offeror. Indicators of control include, but are not limited to, one or more of the following: Ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

"Inverted domestic corporation" means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

"Manufactured end product" means any end product in product and service codes (PSCs) 1000-9999, except--

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

https://www.sam.gov/

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

"Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

"Predecessor" means an entity that is replaced by a successor and includes any predecessors of the predecessor.

"Reasonable inquiry" has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

"Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate--

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended.

"Sensitive technology"--

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically--

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)).

"Service-disabled veteran-owned small business (SDVOSB) concern" means a small business concern—

(1)(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs' Veterans Benefits Administration, as a service-disabled veteran.

"Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program" means an SDVOSB concern that--

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

"Service-disabled veteran-owned small business (SDVOSB) Program" means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

"Small business concern"--

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

"Small disadvantaged business concern, consistent with 13 CFR 124.1001", means a small business concern under the size standard applicable to the acquisition, that--

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by--

(i) One or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR 124.104(c)(2); and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

"Subsidiary" means an entity in which more than 50 percent of the…