Solicitation Attachment 1 - Bag Requirement.pdf
PDF 48 KB Posted
- Attached to
- Abrasive Grit
- Solicitation number
- SPMYM4-26-Q-3728
About this file
This document is a product specification and packaging requirement for a federal procurement of abrasive blasting media. The required product is Aluminum Oxide, size #36 with no substitution allowed, issued in 1-ton bags (2,000 lbs. each). The current stock number is 5350-HM-CN1-7297; the commodity was previously identified as 5350-HM-CN0-9875.
Each bag must be marked with the stock number and batch or lot number, with batch/lot numbers on the Certificate of Conformance matching those on the bags. The shipping bags must meet specific construction standards: woven polypropylene with a 5:1 safety factor rating, minimum 1400 denier in warp and 1200 in weft, with 16x14 yards per inch count, double-strength sidewalls, and a burst test rating of not less than 450 lbs per inch. Bags must be equipped with a sling containing 4 or more pickup points and lift straps with 2,000 lbs. break strength. Top closure requires a nylon tension fastener or plastic-coated wire tie, while the bottom discharge spout (10" diameter x 20" long) must include a 3.5-mil polyester liner/moisture barrier and be closed with a nylon tension fastener or plastic-coated wire tie. A woven polypropylene flap barricade secured with 1/8" braided polypropylene draw string shall cover the tucked/folded discharge spout. Net weight per load must not exceed 2,000 lbs. Bags shall be palletized in accordance with Mil-Std-147 (latest revision) without strapping, with fiberboard or plywood placed between bags and pallets to prevent fabric sagging and forklift puncture.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation - SPMYM426Q3728_FINAL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Aluminum Oxide, size #36 (no substitution allowed) Unit of issue = 1 ton bag (2000 lbs.)
JML Attachment: For Additional Ordering Requirements
EACH SACK SHALL BE MARKING WITH THE FOLLOWING INFO:
1) STOCK NUMBER: 5350-HM-CN1-7297
2) BATCH OR LOT NUMBER (BATCH/LOT NUMBER(S) ON COC MUST MATCH
THOSE ON THE BAGS)
Preparation for Delivery.
Abrasive blasting media shall be shipped in bulk commodity shipping bags with a 5:1 Safety Factor rating, constructed of woven polypropylene; denier not less than 1400 in warp & 1200 in weft; count not less than 16x14 yards per inch; with double strength sidewalls; single poly top and bottom. Fabric is to be treated for ultraviolet light protection to retain 75% strength after 1200 hours in a Weatherometer. Material must have a burst test of not less than 450 lbs per inch. Bag will be equipped with a sling with 4 or more pickup points and 4 or more lift straps that cradle the bottom of the bag to provide a method of handling. Reinforced strap 1- to be sewn around the top perimeter of bag and is included as an integral part of the sling.
Sling will be constructed of reak strength of not less than 2000 lbs. Top closure shall consist of a nylon tension fastener or plastic coated wiretie. Bottom discharge shall concentric spout closed with nylon tension fastener or plastic coated wire tie. A 3.5mil polyester liner/moisture barrier shall be inserted & tied off through bottom of discharge spout.
Tucked/folded discharge spout shall be covered by a woven polypropylene flap weight of load must not exceed 2000 lbs. Bags shall be palletized IAW Mil-Std-147 (latest revision), without strapping. Fiberboard or Plywood shall be placed between the bag & pallet to prevent fabric from sagging & puncture by the forklift.
Info only: this commodity was previously identified as 5350-HM-CN0-9875
Attachment 1 - Bag Requirement
File details come from the government source that posted it. Updated .