REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

c. CITY

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NO.

(a)

SUPPLIES/ SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NO. 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

Created On:

11 Aug 2026, 12:38 PM Greenwich Mean Time

Section A - Solicitation/Contract Form

Socket Wrench Crowfoot Attachments and Gimbal Bearing Compressor Sets

POINTS OF CONTACT (POC)

NAWC-AD LKE Procurement: Suresh Jafar; 240-587-2457; suresh.jafar.civ@us.navy.mil

SUPPLEMENTAL INFORMATION

This solicitation is a 100% Small Business Set-Aside. The solicitation package is intended to competitively procure the manufacture, assembly, inspection, and delivery of Socket Wrench Crowfoot Attachments (Part Number (P/N) 18C12916-1; National Stock Number (NSN) 5120-01-733-4224) and Gimbal Bearing Compressor Sets (Part Number (P/N) 901-210-025-101; National Stock Number (NSN) 5120-01-450-0023) in support of the CMV, MV, and CV-22 Program.

It is anticipated that this solicitation will result in a Firm-Fixed-Price (FFP) type contract.

IMPORTANT INFORMATION: Registration in the Department of Defense (DoD) System for Award Management (SAM) database will be a prerequisite for receiving an award. For more information on the SAM database, refer to the SAM website at https://www.sam.gov/portal/public/SAM.

Proposal validity shall be for 90 days.

RELEASE OF TECHNICAL DATA PACKAGE INFORMATION: Drawing Packages, associated with the solicitation, will NOT be posted with the Request for Proposal and must be obtained through this office. This program includes information that is only releasable to current and approved Department of Defense (DoD) contractors. In addition, the program requires a procurement effort in certain critical technologies/data that are not releasable to foreign firms. Some documents are under Federal export control for “sensitive” or “controlled” technologies regulated by the U.S. Department of State International Traffic in Arms Regulations (ITAR) protecting national security. Data may not be exported without an approval, authorization, or license under E.O.

12470 or the Arms Export Control Act. Disclosure of the control drawings requires the verification of a current license for the oral, visual or documentary disclosure of technical data by U.S. persons to foreign persons as defined under the U.S. Department Of State website: https://www.pmddtc.state.gov/ddtc_public Drawing Packages are export controlled. Contractors interested in receiving the necessary technical data for proposal purposes, must submit a valid, current DD Form 2345 Military Critical Technical Data Agreement to this office.

The DD Form 2345 must be on file with the United States/Canada Joint Certification Office. For more information, please visit https://public.logisticsinformationservice.dla.mil/PublicHome/jcp/default.aspx.

Interested Firms shall submit a written request for a copy of the Technical Data Package through Mr. Suresh Jafar at: suresh.jafar.civ@us.navy.mil. To obtain a copy of Drawing Packages, the written request must be submitted to this office and must include the name of your company, mailing address, phone number, email address, current CAGE number and a copy of current DD Form 2345. Only Offerors who have requested a drawing package and have a valid and current DD Form 2345 will be considered for award.

Contractor Responsibility - Cybersecurity Maturity Model Certification (CMMC) Access to Controlled Unclassified Information a.) The technical data package contains CUI.

b.) This solicitation includes DFARS 252.204-7025, Notice Cybersecurity Maturity Model Certification Requirements.

c.) Offerors must obtain access to the CUI drawing package in order to prepare a proposal and must possess a current and valid CMMC Level 2 (Self) certification at the time of contract award.

d.) Access will be granted only to entities that demonstrate:

N6833526Q11640004

1.) Current and valid CMMC Level 2 (Self); and 2.) Compliance with applicable safeguarding requirements; and 3.) Valid DD Form 2345.

e.) The Government will verify CMMC status in the Supplier Performance Risk System (SPRS) prior to releasing the CUI materials.

f.) Failure to maintain the required CMMC Level 2 prior to award will render the Offeror ineligible for award.

g.) By submission of a proposal, the Offeror represents that, if selected for award, it will possess the required CMMC Level 2 certification at the time of award.

h.) If the Offeror intends to utilize subcontractors that will process, store, or transmit FCI or CUI, the Offeror shall ensure such subcontractors possess the required CMMC level prior to award of subcontracts, in accordance with DFARS clause requirements.

i.) The Government will verify that the apparently successful offeror possesses the required CMMC Level 2 prior to award.

j.) An Offeror that does not possess the required CMMC Level 2 at the time of award will be ineligible for award.

k.) In order to be eligible for award the offeror must obtain access to the CUI drawing package by submitting a valid DD Form 2345 and a Current and valid CMMC Level 2 (Self).

1.) Failure to obtain the CUI drawing package will render the Offeror ineligible for award.

m.) Compliance with the above is a material condition of award.

Section B - Supplies or Services & Prices or Costs

Additional Information/Notes

Item Supplies/Service Quantity Unit Unit Price Amount

Socket Wrench, Crowfoot Attachment Platform CMV-22

((P/N): 18C12916-1, (NIIN): 01-733-4224)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

7 Each

Socket Wrench, Crowfoot Attachment Platform MV-22

((P/N): 18C12916-1, (NIIN): 01-733-4224)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

13 Each

Socket Wrench, Crowfoot Attachment Platform CV-22

((P/N): 18C12916-1, (NIIN): 01-733-4224)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

10 Each

Compressor Set, Gimbal Bearings Platform CMV-22

((P/N): 901-210-025-101, (NIIN): 01-450-0023)

NOTE: The requirements in DFARS 252.211-7003, Item Identification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

Pricing Arrangement: Firm Fixed Price

2 Each

Contract Data Requirements List (CDRL) Not Separately Priced (NSP) In accordance with Statement of Work (SOW) 2.3 Data Deliverables Exhibit A, A001

Section C - Description/Specifications/Statement of Work

STATEMENT OF WORK

SOCKET WRENCH, CROWFOOT ATTACHMENT &

COMPRESSOR SET, GIMBAL BEARINGS

FOR THE V-22 AIRCRAFT

1.0 SCOPE

This Statement of Work (SOW) establishes the tasks that must be performed by the contractor for the manufacture, assembly, inspection and delivery of Intermediate (I) and Depot (D) Level Peculiar Support Equipment (PSE) end items for the V-22 Aircraft.

APPLICABLE DOCUMENTS

3909AS9999, Rev B Identification Plate Support Equipment

18C12916 Crowfoot Attachment, Socket Wrench

1575 Combined TDP Technical Data Package for Compressor Set, Gimbal Bearings (37 pages)

DFARS Clause 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting

MIL-HDBK-61A Configuration Management Guidance

MIL-HDBK-781A Reliability Test Methods, Plans, and Environments for Engineering Development, Qualification, and Production

MIL-STD-130 Identification Marking of U.S. Military Property

MIL-STD-129R Military Marking for Shipment and Storage

2.0 REQUIREMENTS

2.1 General

The contractor shall provide materials and services as required to procure, manufacture, assemble, inspect and deliver various quantities to support V- 22 outfitting of the I and D-Level PSE end items in accordance with the respective Government furnished drawing package as called out below. Items to be delivered within 180 days of award of contract.

CLIN Platform Part Number NIIN Nomenclature Qty

0001 CMV 18C12916-1 01-733-4224 Socket Wrench, Crowfoot Attachment 7

0002 MV

18C12916-1

01-733-4224 Socket Wrench, Crowfoot Attachment 13

0003 CV 18C12916-1 01-733-4224 Socket Wrench, Crowfoot Attachment 10

0004 CMV 901-210-025-101 01-450-0023 Compressor Set, Gimbal Bearings 2

2.2 Technical Point of Contact (TPOC) Inspections

The contractor shall notify the NAVAIR TPOC a minimum of thirty (30) days prior to planned shipment the opportunity to inspect, at the discretion of the Government, to ensure continued compliance with the drawings and requirements of the contract.

2.3 Data Deliverables

All deliverable data items shall be provided in accordance with this SOW and Contract Data Requirements List (CDRL), Form DD1423, Exhibit A, A001.

2.3.1 Request for Variance (RFV)

When identified, the contractor shall submit to the government for approval recommendations for Request for Variance, Exhibit A, CDRL A001. The contractor is advised to consult MIL-HDBK-61 Configuration Management when contemplating submitting one of these configuration change requests. These change requests shall be prepared and submitted to the government IAW CDRL A001.

2.4 Quality Assurance Program

The Contractor shall maintain a quality system that ensures that each I and D-level PSE end item is manufactured in accordance with the approved drawings. The Contractor shall hold current ISO 9001 certification at the time of award and throughout the performance of the contract This will ensure that manufactured configuration items are built to print, functional, and reliably made IAW controlling technical drawings, specifications and standards. Each item manufactured as part of this contract shall have passed a Government final inspection prior to DD-250.

2.5 Item Unique Identification (IUID) Marking of US Military Property

In accordance with DFARS Clause 252.211-7003 Item Identification and valuation, the contractor is required to mark and register all end items and their components meeting the requirements called out in latest version of MIL-STD-130 at time of contract award. These include components for which the Governments unit acquisition cost is $5,000 or greater, or any component, subassembly or embedded part that is serially managed, mission essential or a controlled inventory item.

2.5.1 Construct and Method

Details on creating the UID and the marking method are contained in MIL-STD-130N. The UID may be either UID Construct #1 or Construct #2 with Construct #2 being the preferred method.

2.5.2 UID Location and Marking

The locations and marking methods selected should bear no impact on the performance of the part and minimal configuration change(s) to the part. The UID (including 2D Matrix) should be incorporated onto the data plate, in accordance with drawing 3909AS9999 Rev B. If the 2D matrix can't be incorporated onto the data plate, a 2D matrix sticker can be applied onto the main data plate provided it can be done without covering any critical data. When the 2D Data Matrix is placed directly onto the data plate, the Part Number, Serial Number and CAGE human readable characters are not required. If the above cannot be accomplished, a separate data plate can be attached which contains the 2D Matrix plus the human readable characters for the Part Number, Serial Number and CAGE. This added data plate should be attached in close proximity to the main data plate.

2.5.3 Permanency and Legibility

The UID marking and identification plates, tags, or labels when used on equipment, parts, assemblies, subassemblies, units, sets, or groups shall be permanent during the normal life expectancy of the item and be capable of withstanding the environmental test and cleaning procedures specified for the item. Legibility shall be as required for ready readability as per MIL-STD-130.

2.5.4 UID Registration http://www.acq.osd.mil/dpap/UID/>.

2.5.5 Records

The contractor shall maintain an accurate, current list of UIDs for all manufactured items on this contract and supply to the government upon request. The list shall include P/N, Serial #, CAGE, UID Location, Construct used, how it was marked and the registration method used.

2.6 Government Deliveries, Inspection and Acceptance

Inspection and Acceptance shall be performed at Origin by DCMA. FOB is Destination.

2.7 Packaging, Handling, Storage and Transportation (PHS&T)

2.7.1 Packaging Requirements

The Contractor, and any subcontractors or vendors shall comply with best commercial practices for PHS&T procedures in the protection of sensitive electronic components from electrostatic discharge damage. The Contractor shall ensure that all unit, intermediate, and shipping containers are marked in compliance with recognized best commercial practices. The Contractor shall select the most economical mode of transportation for equipment, Support Equipment (SE) end items, spare and repair parts consistent with transportation priority, and required delivery dates. For items FOB destination basis, commercial bills of lading shall be used.

2.7.2 Marking

Marking shall be in accordance with MIL-STD-129R. Additionally, special marking labels (fragile, delicate, etc.) shall be applied to all unit, intermediate and shipping containers as an integral part of the total pack. The contractor shall select the appropriate special marking label (s) as additional means to protect the items during packaging, handling, storage, transit, and removal from the pack.

3.0 Cybersecurity Maturity Model Certification (CMMC) Program

Cybersecurity is a top priority for the Department of Defense (DoD). The defense industrial base (DIB) faces increasingly frequent and complex cyberattacks. To strengthen DIB cybersecurity and better safeguard DoD information, the DoD developed the Cybersecurity Maturity Model Certification (CMMC) Program to assess DoD cybersecurity requirements pertaining to Federal Contract Information (FCI) and Controlled Unclassified Information (CUI).

The items in this acquisition have been deemed to fall into CMMC Level 2- Self-Assessment. CMMC Level 2 requires implementation of the 110 security requirements set forth in NIST SP 800-171 Rev. 2 to protect CUI in contractor information systems. Level 2 assessments are conducted every three years. CMMC Level 2 self-assessment scores are entered by the OSA into SPRS.

4.0 Shipping

Shipments shall be transported via a traceable means of transportation. All shipments under this contract shall be addressed per below:

CMV-22 (CLINs 0001, 0004)

DODACC N4231N

Central Warehouse

(NU1) NAVAIR Warehouse B

DSCR, BLDG 44

Richmond, VA 23237

Mark For: CMV-22, Samantha Holland (301) 757-2041

FOB: Destination

MV-22 (CLIN 0002)

DODACC N4231N

Central Warehouse

(NU1) NAVAIR Warehouse B

DSCR, BLDG 44

Richmond, VA 23237

Mark For: MV-22, POC: George Dion, 732-323-7363

FOB: Destination

CV-22 (CLIN 0003)

DODACC N4231N

Central Warehouse

(NU1) NAVAIR Warehouse B

DSCR, BLDG 44

Richmond, VA 23237

Mark For: CV-22, Samantha Holland (301) 757-2041

FOB: Destination

Requirements

SOCKET WRENCH, CROWFOOT ATTACHMENT, COMPRESSOR SET, GIMBAL BEARINGS FOR

ORGANIZATION APM275 FY: 2026, AMS N68335-26-SIMACQ-APM275-0440

Additional Regulation or Supplemental Clauses Incorporated by Full Text

CTXT.211-9510 CONTRACTOR EMPLOYEES (NAVAIR) (May 2011)

(a) In all situations where contractor personnel status is not obvious, all contractor personnel are required to identify themselves to avoid creating an impression to the public, agency officials, or Congress that such contractor personnel are Government officials. This can occur during meeting attendance, through written (letter or email) correspondence or verbal discussions (in person or telephonic), when making presentations, or in other situations where their contractor status is not obvious to third parties. This list is not exhaustive. Therefore, the contractor employee(s) shall:

(1) Not by word or deed give the impression or appearance of being a Government employee;

(2) Wear appropriate badges visible above the waist that identify them as contractor employees when in Government spaces, at a Government-sponsored event, or an event outside normal work spaces in support of the contract/order;

(3) Clearly identify themselves as contractor employees in telephone conversations and in all formal and informal written and electronic correspondence. Identification shall include the name of the company for whom they work;

(4) Identify themselves by name, their company name, if they are a subcontractor the name of the prime contractor their company is supporting, as well as the Government office they are supporting when participating in meetings, conferences, and other interactions in which all parties are not in daily contact with the individual contractor employee; and

(5) Be able to provide, when asked, the full number of the contract/order under which they are performing, and the name of the Contracting Officer's Representative.

(b) If wearing a badge is a risk to safety and/or security, then an alternative means of identification maybe utilized if endorsed by the Contracting Officer's Representative and approved by the Contracting Officer.

(c) The Contracting Officer will make final determination of compliance with regulations with regard to proper identification of contractor employees.

Section D - Packaging and Marking

Additional Regulation or Supplemental Clauses Incorporated by Full Text

DTXT.204-9501 NATIONAL STOCK NUMBERS (NAVAIR) (Mar 2007)

(a) This clause applies to supplies that are stock numbered under Federal Catalog System procedures.

(b) Unless otherwise authorized by the Contracting Officer, in writing, the Contractor shall not deliver any supplies until the supplies have been marked with a National Stock Number. All available National Stock Numbers will be furnished by the Government. If National Stock Numbers are not furnished by the Government in time to meet the delivery schedule for the supplies, the Contractor may present the supplies that are scheduled for delivery to the Contracting Officer for acceptance. The Contracting Officer may accept such supplies without National Stock Numbers and the Government will pay the Contractor therefore, provided that title to the supplies is vested in the Government.

(c) The term "Federal Stock Number" (FSN), which may be referred to in the specifications of this contract or elsewhere in this contract, shall mean "National Stock Number" (NSN), and the term "Federal Item Identification Number", wherever it appears, shall mean "National Item Identification Number".

(As used in the foregoing clause, the term "Contracting Officer" shall mean the "Administrative Contracting Officer" (ACO) with respect to provisioned items and other supplies ordered by the ACO.)

DTXT.247-9508 PROHIBITION AND LIMITATIONS FOR PACKAGING MATERIALS (NAVAIR) (Aug 2019)

The use of loose fill materials, asbestos, excelsior, newspaper and shredded paper (all types) are prohibited. In addition, all Wood Packaging Materials (WPM) shall be heat treated or chemically treated in accordance with the requirements of the International Standards for Phytosanitary Measures (ISPM) 15:2009, "Regulation of Wood Packaging Material in International Trade."

Section E - Inspection and Acceptance

FAR Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.246-2 Inspection of Supplies-Fixed-Price. Aug 1996 52.246-16 Responsibility for Supplies. Apr 1984

FAR Clauses Incorporated by Full Text

52.246-11 Higher-Level Contract Quality Requirement. (Dec 2014)

Higher-Level Contract Quality Requirement (Dec 2014)

(a) The Contractor shall comply with the higher-level quality standard(s) listed below.

ISO 9001 (2015) Certification

(b) The Contractor shall include applicable requirements of the higher-level quality standard(s) listed in paragraph (a) of this clause and the requirement to flow down such standards, as applicable, to lower-tier subcontracts, in-

(1) Any subcontract for critical and complex items (see 46.203(b) and (c)); or

(2) When the technical requirements of a subcontract require-

(i) Control of such things as design, work operations, in-process control, testing, and inspection; or

(ii) Attention to such factors as organization, planning, work instructions, documentation control, and advanced metrology.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

ETXT.246-9512 INSPECTION AND ACCEPTANCE (NAVAIR) (Oct 2005)

(a) Inspection and acceptance of the supplies or services to be furnished hereunder shall be performed at Origin by DCMA

REPRESENTATIVE.

(b) Acceptance of all Contract Line Items/Sub Line Items (CLINs/SLINs) shall be made by signature of the accepting authority on a DD Form 250 submitted through the WAWF system. Acceptance will only occur when the accepting authority is sure that inspections performed demonstrate compliance with contract requirements.

Overall Contract Inspection/Acceptance Locations

Inspection and Acceptance Location

Both Source Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions. Please note that DoDAAC N68335 and associated address is a placeholder for this CLIN as inspection shall be performed at Origin and the Contractor /Local DCMA Office is unknown due to this effort being solicited on a competitive basis. The DoDAAC and all associated data will be updated to the appropriate local DCMA Office within the Contract.

DoDAAC: N68335 CountryCode: USA

NAVAIR WARFARE CTR AIRCRAFT DIV

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

To Be Determined, To Be Determined Email: To Be Determined Telephone: To Be Determined

Inspection and Acceptance Location

Both Source Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions. Please note that DoDAAC N68335 and associated address is a placeholder for this CLIN as inspection shall be performed at Origin and the Contractor /Local DCMA Office is unknown due to this effort being solicited on a competitive basis. The DoDAAC and all associated data will be updated to the appropriate local DCMA Office within the Contract.

DoDAAC: N68335 CountryCode: USA

NAVAIR WARFARE CTR AIRCRAFT DIV

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

To Be Determined, To Be Determined Email: To Be Determined Telephone: To Be Determined

Inspection and Acceptance Location

Both Source Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions. Please note that DoDAAC N68335 and associated address is a placeholder for this CLIN as inspection shall be performed at Origin and the Contractor /Local DCMA Office is unknown due to this effort being solicited on a competitive basis. The DoDAAC and all associated data will be updated to the appropriate local DCMA Office within the Contract.

DoDAAC: N68335 CountryCode: USA

NAVAIR WARFARE CTR AIRCRAFT DIV

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

To Be Determined, To Be Determined Email: To Be Determined Telephone: To Be Determined

Inspection and Acceptance Location

Both Source Instructions: Acceptance and Inspection will be conducted in accordance with contract terms and conditions. Please note that DoDAAC N68335 and associated address is a placeholder for this CLIN as inspection shall be performed at Origin and the Contractor /Local DCMA Office is unknown due to this effort being solicited on a competitive basis. The DoDAAC and all associated data will be updated to the appropriate local DCMA Office within the Contract.

DoDAAC: N68335 CountryCode: USA

NAVAIR WARFARE CTR AIRCRAFT DIV

LKE. JB MDL, BLDG 271 HIGHWAY 547

JOINT BASE MDL, NJ 08733

UNITED STATES

To Be Determined, To Be Determined Email: To Be Determined Telephone: To Be Determined

Section F - Deliveries or Performance

Overall Contract Delivery Period

Contractor Destination

Line Item Delivery Schedule Quantity Address and POC Special Handling/Notes

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

7 Each Ship To DoDAAC: N4231N CountryCode: USA

NAVAIR WAREHOUSE B

DEFENSE SUPPLY CENTER RICHMOND, 6090

STRATHMORE RD, BLDG 44

RICHMOND, VA 23297

UNITED STATES

Mark For: CMV-22, Samantha Holland, Logistics Specialist Telephone: (301) 757-2041

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

13 Each Ship To DoDAAC: N4231N CountryCode: USA

NAVAIR WAREHOUSE B

DEFENSE SUPPLY CENTER RICHMOND, 6090

STRATHMORE RD, BLDG 44

RICHMOND, VA 23297

UNITED STATES

Mark For: MV-22, George Dion, Logistics Specialist Telephone: (732) 323-7363

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

10 Each Ship To DoDAAC: N4231N CountryCode: USA

NAVAIR WAREHOUSE B

DEFENSE SUPPLY CENTER RICHMOND, 6090

STRATHMORE RD, BLDG 44

RICHMOND, VA 23297

UNITED STATES

Mark For: CV-22, Samantha Holland, Logistics Specialist Telephone: (301) 757-2041

FoB Details Contractor Destination

Delivery Schedule From date of lead time event to delivery 180 Calendar Days Date of Award

2 Each Ship To DoDAAC: N4231N CountryCode: USA

NAVAIR WAREHOUSE B

DEFENSE SUPPLY CENTER RICHMOND, 6090

STRATHMORE RD, BLDG 44

RICHMOND, VA 23297

UNITED STATES

Mark For: CMV-22, Samantha Holland, Logistics Specialist Telephone: (301) 757-2041

FoB Details Contractor Destination

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.242-15 Stop-Work Order. Aug 1989 52.242-17 Government Delay of Work. Apr 1984 52.247-34 F.o.b. Destination. Jan 1991

Section G - Contract Administration Data

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports. Dec 2018

DFARS Clauses Incorporated by Full Text

252.232-7006 Wide Area WorkFlow Payment Instructions. (Jan 2023)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as Electronic invoicing.

authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice WAWF training.

Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, Electronic Data Interchange, or File Transfer WAWF methods of document submission.

Protocol.

(f) The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF payment instructions.

WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following document type(s): Document type.

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF Document routing.

when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC TBD

Issue By DoDAAC N68335

Admin DoDAAC TBD

Inspect By DoDAAC TBD

Ship To Code N4231N

Ship From Code TBD

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in Payment request.

accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F. Receiving report.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD (DCMA Office)

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

Additional Regulation or Supplemental Clauses Incorporated by Full Text

GTXT.232-0001 PAYMENT INSTRUCTIONS (NAVAIR) (May 2023)

For Government Use Only

Contract/Order Payment Clause Type of Payment Request

Supply Service Construction Payment Office

Allocation Method

52.212-4 (Alt I), Contract Terms and Conditions - Commercial Products and Commercial Services;

52.216-7, Allowable Cost and Payment; 52.232-7, Payments Under Time-and-Materials and Labor- Hour Contracts

Cost Voucher

X X N/A

Line item specific proration. If there is more than one ACRN within a deliverable contract line item, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN on the line item billed.

Line item specific by fiscal year. If there is more than one ACRN within a deliverable line or deliverable

52.232-1, Payments, 252.217-7007, Payments (vessel repair and alterations)

Navy Shipbuilding

Invoice (Fixed Price)

X X N/A subline item the funds will be allocated using the oldest funds first.

In the event of a deliverable line or deliverable subline item with two or more ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-1, Payments; 52.232-2, Payments Under Fixed-Price Research and Development Contracts;

52.232-3, Payments Under Personal Services Contracts; 52.232-4, Payments Under Transportation Contracts and Transportation-Related Services Contracts; and 52.232-6, Payments Under Communication Service Contracts With Common Carriers

Invoice X X N/A

Line item specific proration. If there is more than one ACRN within a deliverable line item or deliverable subline item, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN on the deliverable line or deliverable subline item for which payment is requested.

52.232-5, Payments Under Fixed-Price Construction Contracts

Construction Payment Invoice

N/A N/A X

Line item specific by fiscal year. If there is more than one ACRN within a deliverable line or deliverable subline item the funds will be allocated using the oldest funds first. In the event of a deliverable line or deliverable subline item with two or more ACRNs with the same fiscal year, those amounts will be prorated to the available unliquidated funds for that year.

52.232-16, Progress Payments (excluding contracts with multiple lot progress payments)

Progress Payment*

X X N/A

Contract-wide proration. Funds shall be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN.

Progress payments are considered contract level financing, and the "contract price" shall reflect the fixed-price portion of the contract per FAR 32.501-3.

52.232-16, Progress Payments; 252.232-7018, Progress Payments-Multiple Lots

Progress Payment*

X X N/A

Lot-wide proration (applies to lots specifically identified in the contract). If there is more than one ACRN within a lot, the funds will be allocated in the same proportion as the amount of funding currently unliquidated for each ACRN on the lot for which payment is requested.

52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services;

52.232-30, Installment Payments for Commercial Products and Commercial Services

Commercial Product and Commercial

Service Financing*

X X N/A

Specified in approved payment. The contracting officer shall specify the amount to be paid and the account(s) to be charged for each payment approval in accordance with FAR 32.207(b)(2).

52.232-32, Performance-Based Payments Performance-

Based Payments*

X X N/A

Specified in approved payment.

The contracting officer shall specify the amount to be paid and the account

(s) to be charged for each payment approval in accordance with FAR 32.1007(b)(2).

252.232-7002, Progress Payments for Foreign Military Sales Acquisitions

Progress Payment*

X X N/A

Allocate costs among line items and countries in a manner acceptable to the administrative contracting officer.

*Liquidation of Financing Payments. Liquidation will be applied by the payment office against those ACRNS which are identified by the payment instructions for the delivery payment and in keeping with the liquidation provision of the applicable contract financing clause (i.e., progress payment, performance -based payment, or commercial product and commercial service financing).

GTXT.242-9511 CONTRACT ADMINISTRATION DATA (NAVAIR) (Nov 2017)

(a) Contract Administration Office.

(1) Contract administration functions (see FAR 42.302(a) and DFARS 242.302(a)) are assigned to: See the ADMINISTERED BY Block on the face page of the contract, modification, or order.

(b) Special Instructions (see FAR 42.202(b) and (c)):

(1) The following contract administration functions are retained (see FAR 42.302(a) and DFARS 242.302(a)):

Functions Retained Retained for Performance By:

N/A N/A

(2) The following additional contract administration functions are assigned (see FAR 42.302(b)):

Additional Functions Retained for Performance By:

N/A N/A

(c) Inquiries regarding payment should be referred to: MyInvoice through the Wide Area Workflow eBusiness Suite: https://wawf.eb.mil/.

Section H - Special Contract Requirements

Additional Regulation or Supplemental Clauses Incorporated by Full Text

HTXT.216-9512 PAPERLESS CONTRACTING (NAVAIR) (Jun 2009)

(a) Orders and requests for proposals are hereby authorized to be issued by facsimile or by electronic commerce (including e-mail and paperless methods of delivery). Nothing in this contract should be read to prohibit these types of orders. In the event of a conflict with any other provision of this contract, this clause shall govern.

(b) To the extent the terms "written", "mailed", or "physically delivered" appear in other provisions of this contract, these terms are hereby defined to explicitly include electronic commerce, email, or paperless delivery methods.

Section I - Contract Clauses

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

52.202-1 Definitions. Jun 2020 52.203-3 Gratuities. Apr 1984 52.203-5 Covenant Against Contingent Fees. May 2014 52.203-6 Restrictions on Subcontractor Sales to the Government. Jun 2020 52.203-7 Anti-Kickback Procedures. Jun 2020 52.203-8 Cancellation, Rescission, and Recovery of Funds for Illegal or Improper Activity. May 2014 52.203-10 Price or Fee Adjustment for Illegal or Improper Activity. May 2014 52.203-12 Limitation on Payments to Influence Certain Federal Transactions. Jun 2020 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements. Jan 2017

52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards. (Deviation 2026- O0038)

Feb 2026

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038) Feb 2026 52.204-19 Incorporation by Reference of Representations and Certifications. Dec 2014

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

Feb 2026

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026- O0038)

Feb 2026

52.211-5 Material Requirements. (Deviation 2026-O0038) Feb 2026 52.211-15 Defense Priority and Allocation Requirements. Apr 2008

52.213-4 Terms and Conditions-Simplified Acquisitions (Noncommercial). (Deviation 2026- O0038)

Feb 2026

52.215-2 Audit and Records-Negotiation. (Deviation 2026-O0038) Feb 2026 52.215-8 Order of Precedence-Uniform Contract Format. (Deviation 2026-O0038) Feb 2026 52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026-O0038) Feb 2026 52.219-33 Nonmanufacturer Rule. (Deviation 2026-O0038) Feb 2026 52.222-3 Convict Labor. (Deviation 2026-O0038) Feb 2026 52.222-19 Child Labor-Cooperation with Authorities and Remedies. (Deviation 2026-O0038) Mar 2026 52.222-35 Equal Opportunity for Veterans. (Deviation 2026-O0038) Feb 2026 52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038) Feb 2026 52.222-37 Employment Reports on Veterans. (Deviation 2026-O0038) Feb 2026

52.222-40 Notification of Employee Rights Under the National Labor Relations Act. (Deviation 2026-O0038)

Feb 2026

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) Feb 2026 52.222-54 Employment Eligibility Verification. (Deviation 2026-O0038) Feb 2026

52.222-90 Addressing DEI Discrimination by Federal Contractors. (Deviation 2026-O0040, Revision 1)

Apr 2026

52.223-23 Sustainable Products. (Deviation 2026-O0038) Feb 2026 52.226-7 Drug-Free Workplace. May 2024 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving. May 2024 52.229-3 Federal, State, and Local Taxes. Feb 2026 52.232-1 Payments. Apr 1984 52.232-8 Discounts for Prompt Payment. Feb 2002 52.232-11 Extras. Apr 1984 52.232-17 Interest. May 2014 52.232-23 Assignment of Claims. May 2014 52.232-24 Prohibition of Assignment of Claims. May 2014 52.232-25 Prompt Payment. Jan 2017 52.232-33 Payment by Electronic Funds Transfer-System for Award Management. Oct 2018 52.232-39 Unenforceability of Unauthorized Obligations. Jun 2013 52.232-40 Providing Accelerated Payments to Small Business Subcontractors. Mar 2023 52.233-1 Disputes. (Deviation 2026-O0038) Feb 2026 52.233-3 Protest after Award. (Deviation 2026-O0038) Feb 2026 52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038) Feb 2026 52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) Feb 2026 52.240-93 Basic Safeguarding of Covered Contractor Information Systems. (Deviation 2026-O0038) Feb 2026 52.242-13 Bankruptcy. Jul 1995 52.243-1 Changes-Fixed-Price. (Deviation 2026-O0038) Feb 2026 52.246-23 Limitation of Liability. Feb 1997 52.247-68 Report of Shipment (REPSHIP). Feb 2006 52.249-2 Termination for Convenience of the Government (Fixed-Price). Apr 2012 52.249-8 Default (Fixed-Price Supply and Service). Apr 1984 52.253-1 Computer Generated Forms. (Deviation 2026-O0038) Feb 2026

DFARS Clauses Incorporated by Reference

Number Title Effective Date

Alternate/ Deviation

Variation Effective Date

252.203-7000 Requirements Relating to Compensation of Former DoD Officials. Sep 2011 252.203-7002 Requirement to Inform Employees of Whistleblower Rights. Dec 2022 252.204-7000 Disclosure of Information. Oct 2016 252.204-7003 Control of Government Personnel Work Product. Apr 1992 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting. May 2024

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

Jan 2023

252.223-7008 Prohibition of Hexavalent Chromium. Jan 2023 252.225-7001 Buy American and Balance of Payments Program. Feb 2024 252.225-7002 Qualifying Country Sources as Subcontractors. Mar 2022 252.225-7048 Export-Controlled Items. Jun 2013 252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime. Jan 2023

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

Jun 2023

252.226-7003 Drug-Free Work Force. Aug 2024 252.232-7010 Levies on Contract Payments. Dec 2006

252.240-7997 NIST SP 800-171 DoD Assessment Requirements. (DEVIATION 2026- O0025)

Feb 2026 Deviation 2026-O0025 Feb 2026

252.243-7001 Pricing of Contract Modifications. Dec 1991 252.243-7002 Requests for Equitable Adjustment. Dec 2022 252.247-7023 Transportation of Supplies by Sea. Oct 2024

FAR Clauses Incorporated by Full Text

52.219-14 Limitations on Subcontracting (DEVIATION 2021-O0008) (Feb 2026) Deviation 2021-O0008 (Feb 2023)

LIMITATIONS ON SUBCONTRACTING (FEB 2023) (DEVIATION 2021-O0008)

(a) This clause does not apply to the unrestricted portion of a partial set-aside.

(b) , as used in this clause, means a first-tier subcontractor, including an independent contractor, that--Definition. Similarly situated entity

(1) Has the same small business program status as that which qualified the prime contractor for the award (e.g., for a small business set-aside contract, any small business concern, without regard to its socioeconomic status); and

(2) Is considered small for the size standard under the North American Industry Classification System (NAICS) code the prime contractor assigned to the subcontract.

(c) This clause applies only to--Applicability.

(1) Contracts that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(2) Part or parts of a multiple-award contract that have been set aside for any of the small business concerns identified in 19.000(a)(3);

(3) Contracts that have been awarded on a sole-source basis in accordance with subparts 19.8, 19.13, 19.14, and 19.15;

(4) Orders expected to exceed the simplified acquisition threshold and that are--

(i) Set aside for small business concerns under multiple-award contracts, as described in 8.405-5 and 16.505(b)(2)(i)(F); or

(ii) Issued directly to small business concerns under multiple-award contracts as described in 19.504(c)(1)(ii);

(5) Orders, regardless of dollar value, that are--

(i) Set aside in accordance with subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 8.405-5 and 16.505(b) (2)(i)(F); or

(ii) Issued directly to concerns that qualify for the programs described in subparts 19.8, 19.13, 19.14, or 19.15 under multiple-award contracts, as described in 19.504(c)(1)(ii); and

(6) Contracts using the HUBZone price evaluation preference to award to a HUBZone small business concern unless the concern waived the evaluation preference.

(d) An independent contractor shall be considered a subcontractor.Independent contractors.

(e) By submission of an offer and execution of a contract, the Contractor agrees that in performance of a contract Limitations on subcontracting.

assigned a North American Industry Classification System (NAICS) code for--

(1) Services (except construction), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding certain other direct costs and certain work performed outside the United States (see paragraph (e)(1)(i)), to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract. The following services may be excluded from the 50 percent limitation:

(i) Other direct costs, to the extent they are not the principal purpose of the acquisition and small business concerns do not provide the service. Examples include airline travel, work performed by a transportation or disposal entity under a contract assigned the environmental remediation NAICS code 562910), cloud computing services, or mass media purchases.

(ii) Work performed outside the United States on awards made pursuant to the Foreign Assistance Act of 1961, or work performed outside the United States required to be performed by a local contractor.

(2) Supplies (other than procurement from a nonmanufacturer of such supplies), it will not pay more than 50 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 50 percent subcontract amount that cannot be exceeded. When a contract includes both supplies and services, the 50 percent limitation shall apply only to the supply portion of the contract;

(3) General construction, it will not pay more than 85 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 85 percent subcontract amount that cannot be exceeded; or

(4) Construction by special trade contractors, it will not pay more than 75 percent of the amount paid by the Government for contract performance, excluding the cost of materials, to subcontractors that are not similarly situated entities. Any work that a similarly situated entity further subcontracts will count towards the prime contractor's 75 percent subcontract amount that cannot be exceeded.

(f) The Contractor shall comply with the limitations on subcontracting as follows:

(1) For contracts, in accordance with paragraphs (c)(1), (2), (3) and (6) of this clause--

[Contracting Officer check as appropriate.]

By the end of the base term of the contract and then by the end of each subsequent option period; or X

[ ] By the end of the performance period for each order issued under the contract.

(2) For orders, in accordance with paragraphs (c)(4) and (5) of this clause, by the end of the performance period for the order.

(g) A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (e) of this clause will be performed by the aggregate of the joint venture participants.

(1) In a joint…