Soliciation_Elevator Contract.docx

W9128F20Q0063

Section SF 1449 - CONTINUATION SHEET

ELEVATOR INSPECTIONS--BASE YEAR -YR 2020

FFP

1.Annual Alimak Elevator Inspection, Service, Safety Drop Test. 2. Supply and Install Alimak Safety Device. 3. Annual Hollister-Whitney Elevator inspection, Service, Load test (Inspection required between Oct-Dec 2020.)

FOB: Destination

MILSTRIP: W59XQG00806935

PURCHASE REQUEST NUMBER: W59XQG00806935

PSC CD: H339

NET AMT

Option 1-YR 2021

1. Annual Alimak Elevator Inspection, service, safety drop test. 2.Annual Hollister-Whitney Elevator Inspection, Service, Load test (Inspection required between Oct-Dec 2021.)

FOB: Destination

NET AMT

Option 2

1. Annual Alimak Elevator Inspection, service, safety drop test. 2. Annual Hollister-Whitney Elevator Inspection, Service. Load test (Inspection required between Oct-Dec 2022.)

NET AMT

Option 3

1. Annual Alimak Elevator Inspection, service, safety drop test. 2. Annual Hollister-Whitney Elevator Inspection, Service. Load test (Inspection required between Oct-Dec 2023.)

NET AMT

Option 4

1.Annual Alimak Elevator Inspection, Service, Safety Drop Test. 2. Supply and Install Alimak Safety Device. 3. Annual Hollister-Whitney Elevator inspection, Service, Load test (Inspection required between Oct-Dec 2024.)

NET AMT

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

DELIVERY INFORMATION

31-MAR-2021

KRIS CLEVELAND

USAED, OMAHACENWO-OD-OA-T

28563 POWERHOUSE RD

PIERRE SD 57501

605-945-3410

968821

31-MAR-2023

968821

31-MAR-2023

968821

31-MAR-2024

968821

31-MAR-2025

968821

PWS

PERFORMANCE WORK STATEMENT (PWS)

OAHE POWERHOUSE AND SURGE TANK ELEVATOR INSPECTION & SERVICE

PART 1

GENERAL INFORMATION

1. GENERAL: This is a non-personal services agreement to provide services to inspect and service for a five year period both elevators at the Oahe Project in the Powerhouse. One of the elevators is an Alimak elevator located in the Surge Tank Structure of the Oahe Powerhouse. The elevator is a Linden Alimak Mini-Scando 4/9 rack and pinion passenger elevator rated at 900 pounds. The second elevator is a Hollister-Whitney MCE elevator rated at 4,000 pounds. The Government shall not exercise any supervision or control over the agreement service providers performing the services herein. Such service providers shall be accountable solely to the Contractor who, in turn is responsible to the Government.

1.1 Description of Services/Introduction: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform the inspection and services as defined in this Performance Work Statement except for those items specified as government furnished property and services. The contractor shall perform to the standards in this agreement.

1.2 Background: Inspection and services will be performed on the Alimak elevator located in the Surge Tank Structure of the Oahe Powerhouse and the Hollister-Whitney elevator in the Oahe Powerhouse. The Contractor must ensure they can perform to USACE specifications by providing references and/or samples of work upon request.

1.3 Objectives:

Linden Alimak Mini-Scando Elevator

· Perform required annual inspection of elevator.

· Perform safety drop test as required annually.

· Supply and install safety device as required, four year frequency.

Hollister-Whitney MCE Elevator

· Perform required annual inspection of elevator.

· Perform a full load test as required in the appropriate year, five year frequency.

1.4 Scope: The elevators will be inspected yearly and certified for use, in accordance with applicable safety codes (e.g. ASME A17.1), federal and state regulations and per manufacturer’s recommendations. The elevators will be safety tested per manufacturer’s recommendations and industry standards yearly. If repairs are found to be necessary, the Contractor will notify the COR immediately and provide costs to perform repairs. The contractor shall provide a report and invoice of the inspection within 30 days of the inspections. The Alimak elevator safety device will be supplied and installed in the Base and Option year 4 of the contract. The Contractor will be responsible for delivery of the part to the site. The Contractor is responsible for all travel and per diem to and from the site.

1.4.1. Estimate Quantity of Work: The U.S. Army Corps of Engineers, Omaha District, Oahe Project estimates yearly inspections and safety drop tests/full load tests for the five year term of this contract. The Alimak safety device will be supplied and installed during the Base and Option year it expires. The safety device was changed in 2016 and expires in 2020, the first year for this contract. The Hollister-Whitney elevator’s last full load test was in July 2015.

1.4.2. Starting Date: Work is to be conducted within the performing service dates between 01 October – 31 December of the perspective awarded contract year. Arrangements for site visits need to be coordinated with a US Army Corps of Engineer COR. The inspection shall be performed within 30 days of the expiration of the previous annual inspection and test, unless a mutually agreed upon start and completion date is approved by the Government Representative.

0. Period of Performance: The period of performance shall be for five (5) years, beginning in 2020 and terminating in 2024, unless cancelled sooner.

0. General Information

1.6.1 Quality Control: The contractor shall develop and maintain an effective quality control program (QCP) to ensure services are performed in accordance with this PWS. The contractor shall develop and implement procedures to identify, prevent, and ensure non-recurrence of defective services. The contractor’s quality control program is the means by which he assures himself that his work complies with the requirement of the agreement.

1.6.2 Quality Assurance: The Government shall evaluate the contractor’s performance under this agreement in accordance with the Quality Assurance Surveillance Plan. This plan is primarily focused on what the Government must do to ensure that the contractor has performed in accordance with the performance standards.

1.6.3 Recognized Holidays: The Contractor is not required to work on the following recognized Federal holidays:

1.6.4 Hours of Operation: The contractor is responsible to perform the work, between the hours of 8:00 a.m. to 5:00 p.m. CST Monday thru Thursday except Federal holidays or when the Government facility is closed due to local or national emergencies, administrative closings, or similar Government directed facility closings. The Contractor must at all times maintain an adequate workforce for the uninterrupted performance of all tasks defined within this PWS. When hiring personnel, the Contractor shall keep in mind that the stability and continuity of the workforce are essential.

1.6.5 Place of Performance: The work to be performed under this agreement will be performed at the Oahe Project Powerhouse, Pierre, South Dakota.

1.6.6 Type of Agreement: The government will award a firm fixed priced Base Contract with Option Years that may be exercised.

1.6.7 Security Requirements: All Contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The Contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in Contractor security matters or processes. Directions for background check are in paragraph 1.6.7.3

1.6.7.1 Submit a complete, updated and signed, list of all Contractor and subcontractor personnel, including their titles and intended working hours, who will be working on site prior to start of work. This listing shall be revised and resubmitted when personnel changes occur.

1.6.7.2 Personnel Risk Assessment

A minimum of seven days prior to engaging in work submit, to the Contracting Officer or Project POC, a Personnel Risk Assessment (PRA) for each employee requiring authorized unescorted access to the Jobsite. The Contractor employee will only be allowed authorized unescorted physical access after the PRA is shown to and approved by the Government.

1.6.7.3 Authorized Unescorted Access Requirements

Perform a PRA on all Contractor personnel that require authorized unescorted access to the Jobsite. Costs associated with the execution of the PRA shall be at the expense of the Contractor. The content of the PRA is defined by the requirements as follows:

a. Criminal Check - Obtain a criminal background check, completed within the last seven years, on all Contractor personnel that require authorized unescorted access to the Jobsite. A minimum of a 7-year criminal background check with the state patrol office shall be performed from all states of residence and employment, for the past seven years. The COR through the Contacting Officer will approve, disapprove, or revoke authorized unescorted access to the Jobsite as a result of the seven-year background check in accordance with Army Directive 2014-05 Enclosure 2.

b. Identity Verification - Contractor employees shall provide positive verification of individual identity prior to authorized unescorted access to the Jobsite. Acceptable forms of identity verification are documents issued by a federal Government agency that include: the individual's photograph, name, and date of birth, such as a passport or military identification (ID) card. Additionally, a state issued driver's license or ID card is acceptable for identity verification.

c. The Criminal Check and Identity Verification shall be updated at least every seven years for each employee requiring authorized unescorted access to the Jobsite.

d. Escort Requirements - Contractor personnel not cleared for authorized access to the Jobsite may be escorted by Government or Contractor personnel that have authorized unescorted access to the Jobsite. All costs related to the escorting of non-cleared personnel shall be at the expense of the Contractor. Additional burden shall not be placed upon the Government to provide these escorts. Prior to access, coordination with the Project Security Officer is required, including but not limited to:

(1) Verification of identity with photo identification

(2) Name of escorting individual and verification of unescorted status

(3) Time of entry into the Jobsite

(4) Time exiting the Jobsite.

1.6.8 Special Qualifications:

1.6.8.1 All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. There are NO classified materials at this project location.

1.6.8.2 The Contractor must pre-screen Candidates using the E-verify Program (http://www.dhs.gov/E-Verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award.

1.6.9 Post Award Conference/Periodic Progress Meetings: Not applicable.

1.6.10 Contracting Officer Representative (COR): Not applicable.

1.6.11 Key Personnel: The following personnel are considered key personnel by the government: Ms. Kris Cleveland, Chief Technical Support. The contractor shall provide a contract manager who shall be responsible for the performance of the work. The name of this person and an alternate, who shall act for the contractor when the manager is absent, shall be designated in writing to the contracting officer. The contract manager or alternate shall have full authority to act for the contractor on all matters relating to daily operation of this agreement. The government representative or alternate shall be available between 8:00 a.m. to 5:00 p.m. CST Monday thru Thursday except Federal holidays or when the government facility is closed for administrative reasons.

1.6.12 Identification of Contractor Employees: Not applicable

1.6.13 Contractor Travel: Not applicable.

1.6.14 Other Direct Costs: Not applicable.

1.6.15 Data Rights: Not applicable.

1.6.16 Organizational Conflict of Interest: Contractor and subcontractor personnel performing work under this agreement may receive, have access to, or participate in the development of proprietary or source selection information (e.g., cost or pricing information, budget information or analyses, specifications or work statements, etc.) or perform evaluation services which may create a current or subsequent Organizational Conflict of Interests (OCI) as defined in FAR Subpart 9.5. The Contractor shall notify the Contracting Officer immediately whenever it becomes aware that such access or participation may result in any actual or potential OCI and shall promptly submit a plan to the Contracting Officer to avoid or mitigate any such OCI. The Contractor’s mitigation plan will be determined to be acceptable solely at the discretion of the Contracting Officer and in the event the Contracting Officer unilaterally determines that any such OCI cannot be satisfactorily avoided or mitigated, the Contracting Officer may effect other remedies as he or she deems necessary, including prohibiting the Contractor from participation in subsequent contracted requirements which may be affected by the OCI.

1.6.17 Governmental Safety:

All work shall be done in accordance with the requirements of USACE EM 385-1-1. The Government considers the Prime Contractor to be the "controlling authority" for all work site safety and health of the subcontractors.

PART 2

DEFINITIONS & ACRONYMS

2. DEFINITIONS AND ACRONYMS:

2.1. DEFINITIONS:

2.1.1. CONTRACTOR: A supplier or vendor awarded a contract to provide specific supplies or service to the government. The term used in this contract refers to the prime.

2.1.2. CONTRACTING OFFICER: A person with authority to enter into, administer, and or terminate contracts, and make related determinations and findings on behalf of the Government. Note: The only individual who can legally bind the Government.

2.1.3. CONTRACTING OFFICER'S REPRESENTATIVE (COR): An employee of the U.S. Government appointed by the contracting officer to administer the contract. Such appointment shall be in writing and shall state the scope of authority and limitations. This individual has authority to provide technical direction to the Contractor as long as that direction is within the scope of the agreement, does not constitute a change, and has no funding implications. This individual does NOT have authority to change the terms and conditions of the agreement.

2.1.4. DEFECTIVE SERVICE: A service output that does not meet the standard of performance associated with the Performance Work Statement.

2.1.5. DELIVERABLE: Anything that can be physically or electronically delivered, but may include non-manufactured things such as meeting minutes or reports.

2.1.6. KEY PERSONNEL: Contractor personnel that are evaluated in a source selection process and that may be required to be used in the performance of a agreement by the Key Personnel listed in the PWS. When key personnel are used as an evaluation factor in best value procurement, an offer can be rejected if it does not have a firm commitment from the persons that are listed in the proposal.

2.1.7. PHYSICAL SECURITY: Actions that prevent the loss or damage of Government property.

2.1.8. QUALITY ASSURANCE: The government procedures to verify that services being performed by the Contractor are performed according to acceptable standards.

2.1.9. QUALITY ASSURANCE SURVEILLANCE PLAN (QASP): An organized written document specifying the surveillance methodology to be used for surveillance of contractor performance.

2.1.10. QUALITY CONTROL: All necessary measures taken by the Contractor to assure that the quality of an end product or service shall meet agreement requirements.

2.1.11. SUBCONTRACTOR: One that enters into a contract with a prime contractor. The Government does not have privity of contract with the subcontractor.

2.1.12. WORK DAY: The number of hours per day the Contractor provides services in accordance with the agreement.

2.1.12. WORK WEEK: Monday through Thursday, unless specified otherwise.

2.2. ACRONYMS:

PART 3

GOVERNMENT FURNISHED PROPERTY, EQUIPMENT, AND SERVICES

3. GOVERNMENT FURNISHED ITEMS AND SERVICES:

3.1. Services: The Government will provide support to move weights as needed within the plant.

3.2 Facilities: Not applicable.

3.3 Utilities: Electrical Power.

3.4 Equipment: The Government can provide crane services if needed to move weights between floors.

3.5 Materials: Not applicable.

PART 4

CONTRACTOR FURNISHED ITEMS AND SERVICES

4. CONTRACTOR FURNISHED ITEMS AND RESPONSIBILITIES:

4.1 General: The Contractor shall furnish all supplies, equipment, labor and services required to perform work under this agreement that are not listed under Section 3 of this PWS.

4.2 Facility Clearance: The Contractor shall coordinate with the Project for any individual and joint clearances required for performance of this contract.

4.3. Materials: The Contractor shall furnish material and supplies necessary to meet the requirements under this PWS to include weights for testing.

4.4. Equipment: The Contractor shall furnish all equipment necessary to meet the requirements under this PWS.

PART 5

SPECIFIC TASKS

5. Specific Tasks:

5.1. Basic Services: The contractor shall provide services to inspect, drop-test, and replace safety device.

5.2. Task Heading.

PART 6

APPLICABLE PUBLICATIONS

6. Publications (Current Editions):

6.1. The Contractor must abide by all applicable regulations, publications, manuals, and local policies and procedures, including:

6.1.1 EM 385-1-1 (2014) Safety and Health Requirements Manual

6.1.2 ASME A17.1 (2016) Safety Code for Elevators and Escalators

6.1.3 Freedom of Information Act, exemptions 5 U.S.C. § 552(b)(1)-(9);

http://www.gpoaccess.gov/cfr/index.html

PART 7

ATTACHMENT/TECHNICAL EXHIBIT

TECHNICAL EXHIBIT 1

Performance Requirements Summary The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service required for each requirement. These thresholds are critical to mission success.

Performance Objective (The Service required—usually a shall statement)

Method of Surveillance

PRS # 1.

The contractor shall inspect and perform all required tests on the elevators. All travel and per diem to the site is included.

PRS # 2

The Contractor shall provide and install the elevator safety device. All travel and per diem to the site is included.

TECHNICAL EXHIBIT 2

DELIVERABLES SCHEDULE

This item recurs. Base Year and Options.

2 copies of all documentation

Hard copy

US ARMY CORPS OF ENGINEERS, OAHE PROJECT, ATTN: MS. KRIS

CLEVELAND, 28563 POWERHOUSE RD, PIERRE, SD 57501

This item is part of the Base and Option 4.

US ARMY CORPS OF ENGINEERS, OAHE PROJECT, ATTN: MS. KRIS CLEVELAND,

28563 POWERHOUSE RD., PIERRE, SD

57501

BIDDING SCHEDULE

BIDDING SCHEDULE

Oahe Powerhouse and Surge Tank Elevator Inspection/Service BASIC CONTRACT-YR. 2020 performing service between 01 Oct 2020 – 31 Dec 2020

OPTION 1-YR. 2021 performing service between 01 Oct 2021 – 31 Dec 2021

OPTION 2-YR. 2022 performing service between 01 Oct 2022 – 31 Dec 2022

OPTION 3-YR. 2023 performing service between 01 Oct 2023 – 31 Dec 2023

OPTION 4-YR. 2024 performing service between 01 Oct 2024 – 31 Dec 2024

TOTAL BASIC + OPTIONS 1 THROUGH 4 $___________

CLAUSES INCORPORATED BY REFERENCE

CLAUSES INCORPORATED BY FULL TEXT

Antiterrorism (AT)/Operations Security (OPSEC) Provisions

1. AT Level I Training. All contractor employees, to include subcontractor employees, requiring access to Army installations, facilities, controlled access areas, or require network access, shall complete AT Level I awareness training within 30 calendar days after contract start date or effective date of incorporation of this requirement into the contract, whichever is applicable. Upon request, the contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee, to the COR or to the contracting officer (if a COR is not assigned), within 5 calendar days after completion of training by all employees and subcontractor personnel. AT Level I awareness training is available at the following website: http://jko.jten.mil/courses/atl1/launch.html; or it can be provided by the RA ATO in presentation form which will be documented via memorandum.

2. Access and General Protection/Security Policy and Procedures. All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation/facility access requirements to be accomplished by installation Provost Marshal Office, Director of Emergency Services or Security Office. Contractor workforce must comply with all personal identity verification requirements (FAR clause 52.204-9, Personal Identity Verification of Contractor Personnel) as directed by DOD, HQDA and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any installation or facility change, the Government may require changes in contractor security matters or processes.

2a. For contractors requiring Common Access Card (CAC). The contractor and all sub-contractors employees will be issued a CAC only if duties involve one of the following: (1) Both physical access to a DoD facility and access, via logon, to DoD networks on-site or remotely; (2) Remote access, via logon, to a DoD network using DoD-approved remote access procedures; or (3) Physical access to multiple DoD facilities or multiple non-DoD federally controlled facilities on behalf of the DoD on a recurring basis for a period of 6 months or more. At the discretion of the sponsoring activity, an interim CAC may be issued based on a favorable review of the FBI fingerprint check and a successfully scheduled NACI at the Office of Personnel Management.

2b. For contractors who do not require CAC, but require access to a DoD facility or installation. Contractor and all associated sub-contractors employees shall comply with adjudication standards and procedures using the National Crime Information Center Interstate Identification Index (NCIC-III) and Terrorist Screening Database (TSDB) (Army Directive 2014-05 / AR 190-13), applicable installation, facility and area commander installation/facility access and local security policies and procedures (provided by government representative, as NCIC and TSDB are available), or, at OCONUS locations, in accordance with status of forces agreements and other theater regulations.

3. AT Awareness Training for Contractor Personnel Traveling Overseas. All US based contractor employees and associated sub-contractor employees traveling overseas will receive the government provided AOR specific AT awareness training. The documentation of training completion must be provided to the COR prior to departure.

4. Suspicious Activity Reporting Training. The contractor and all associated sub-contractors shall receive a brief/training (provided by the RA) on the local suspicious activity reporting program. This locally developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the project manager, security representative or law enforcement entity. This training shall be completed within 30 calendar days of contract award and within 30 calendar days of new employees commencing performance with the results reported to the COR NLT 5 calendar days after the completion of the training.

5. Contractor Employees Who Require Access to Government Information Systems. All contractor employees with access to a government info system must be registered in the Army Training Certification Tracking System (ATCTS) at commencement of services, and must successfully complete the DOD Information Assurance Awareness prior to access to the information systems and then annually thereafter in accordance with personnel security standards listed in AR 25-2 (Information Assurance), an appropriate background investigation will be conducted prior to accessing the government information systems.

6. For Contracts that Require an OPSEC Standing Operating Procedure/Plan. The Contractor shall develop an OPSEC SOP/Plan within 90 days of contract award. The OPSEC SOP/Plan must be reviewed and approved by the RA OPSEC Officer. The SOP/Plan will include the government's critical information, why it needs to be protected, where it is located, who is responsible for it and how to protect it. In addition, the contractor shall identify an individual who will be an OPSEC Coordinator.

7. For Contracts that Require OPSEC Training. All new contractor employees will complete Level I OPSEC Training within 30 calendar days of their reporting for duty. Additionally, all contractor employees must complete annual OPSEC awareness training. The contractor shall submit certificates of completion for each affected contractor and subcontractor employee, to the COR or to the contracting officer (if a COR is not assigned), within 5 calendar days after completion of training. OPSEC awareness training is available at the following websites: https://www.iad.gov/ioss/ or http://www.cdse.edu/catalog/operations-security.html; or it can be provided by the RA OPSEC Officer in presentation form which will be documented via memorandum.

8. For Information assurance (IA)/information technology (IT) training. All contractor employees and associated sub-contractor employees must complete the DoD IA awareness training before issuance of network access and annually thereafter. All contractor employees working IA/IT functions must comply with DoD and Army training requirements in DoDD 8570.01, DoD 8570.01-M and AR 25-2 within six months of employment.

9. For information assurance (IA)/information technology (IT) certification. All contractor employees supporting IA/IT functions shall be appropriately certified upon contract IAW DoD 8570.01-M, DFARS 252.239-7001 and AR 25-2. The baseline certification as stipulated in DoD 8570.01-M must be completed upon contract award.

10. For Contractors Authorized to Accompany the Force. All contractor employees shall ensure the following AT/OPSEC requirements are met prior to deploying personnel authorized to accompany U.S. Armed Forces outside the United States; to include compliance with laws, regulations, pre-deployment requirements, and required training in accordance with combatant command guidance.

11. For Contracts Requiring Performance or Delivery in a Foreign Country. All non-local contracting personnel will comply with theater clearance requirements and allows the combatant commander to exercise oversight to ensure the contractor's compliance with combatant commander and subordinate task force commander policies and directives.

12. For Contracts That Require Handling or Access to Classified Information. Contractor shall comply with AR 380-67 (Personnel Security Program) and Homeland Security Presidential Directive 12 (Policy for a Common Identification Standard for Federal Employees and Contractors) as well as FAR 52.204-2, Security Requirements. Additionally, Contractors must comply with - (1) The Security Agreement (DD Form 441), including the National Industrial Security Program Operating Manual (DoD 5220.22-M); any revisions to DOD 5220.22-M, notice of which has been furnished to the contractor. For classified contracts, the DD Form 254 will be attached with the contract.

13. Will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas. All contract employees, including subcontractor employees who are not in possession of the appropriate security clearance or access privileges, will be escorted in areas where they may be exposed to classified and/or sensitive materials and/or sensitive or restricted areas.

14. (FOR CLASSIFIED CONTRACTS ONLY) Contractor Company to obtain a Facility Clearance and individual clearances at the appropriate level. The Prime Contractor Company must have a Facility Clearance (FCL) at the appropriate level (IAW the NISPOM DOD 5220.22-M and AR 380-49) prior to the start of the contract awarded period of performance. Contractor personnel performing work under this contract must have the required security clearance, per AR 380-67, at the appropriate level at the start of the period of performance. Security Clearances and FCL requirements are required to be maintained for the life of the contract IAW the DD Form 254 attached to the contract. If no FCL, the supporting Government Contracting Activity will sponsor the prime contract company in obtaining the FCL.

15. Pre-screen candidates using E-Verify Program. The Contractor must pre-screen Candidates using the E-verify Program (http://www.uscis.gov/e-verify) website to meet the established employment eligibility requirements. The Vendor must ensure that the Candidate has two valid forms of Government issued identification prior to enrollment to ensure the correct information is entered into the E-verify system. An initial list of verified/eligible Candidates must be provided to the COR no later than 3 business days after the initial contract award." *When contracts are with individuals, the individuals will be required to complete a Form I-9, Employment Eligibility Verification, with the designated Government representative. This Form will be provided to the Contracting Officer and shall become part of the official contract file.

16. For contract requiring armed security guards. All contractor and all associated sub-contractors employees shall comply with applicable installation, facility and area commander installation/facility policies and procedures on storing weapons and ammunition IAW AR 190-11 (provided by government representative).

17. Threat Awareness Reporting Program. All new contractor employees will complete annual Threat Awareness and Reporting Program (TARP) Training provided by a Counterintelligence Agent, IAW AR 381-12 . The contractor shall submit certificates of completion for each affected contractor and subcontractor employee(s) or a memorandum for the record, to the COR or to the contracting officer (if a COR is not assigned), within 5 calendar days after completion of training. Authorized webbased TARP training for CAC card holders is available at the following website: https://www.us.army.mil/suite/page/655474.

WAGE DET NO: 2015-5374

WD "REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5374 Daniel W. Simms Division of | Revision No.: 13 Director Wage Determinations| Date Of Last Revision: 12/23/2019 Note: Under Executive Order (EO) 13658 an hourly minimum wage of $10.80 for calendar year 2020 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2015. If this contract is covered by the EO the contractor must pay all workers in any classification listed on this wage determination at least $10.80 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in calendar year 2020. The EO minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

State: South Dakota

Area: South Dakota Counties of Brule Buffalo Campbell Charles Mix Douglas Hand Hughes Hyde Potter Sully Walworth

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 12.68 01012 - Accounting Clerk II 14.24 01013 - Accounting Clerk III 15.93 01020 - Administrative Assistant 18.59 01035 - Court Reporter 14.97 01041 - Customer Service Representative I 11.84 01042 - Customer Service Representative II 13.31 01043 - Customer Service Representative III 14.52 01051 - Data Entry Operator I 10.98 01052 - Data Entry Operator II 11.98 01060 - Dispatcher Motor Vehicle 15.94 01070 - Document Preparation Clerk 11.92 01090 - Duplicating Machine Operator 11.92 01111 - General Clerk I 11.58 01112 - General Clerk II 12.63 01113 - General Clerk III 14.18 01120 - Housing Referral Assistant 16.68 01141 - Messenger Courier 10.13 01191 - Order Clerk I 11.87 01192 - Order Clerk II 12.95 01261 - Personnel Assistant (Employment) I 13.81 01262 - Personnel Assistant (Employment) II 15.45 01263 - Personnel Assistant (Employment) III 17.22 01270 - Production Control Clerk 16.30 01290 - Rental Clerk 11.44 01300 - Scheduler Maintenance 13.38 01311 - Secretary I 13.38 01312 - Secretary II 14.97 01313 - Secretary III 16.68 01320 - Service Order Dispatcher 13.70 01410 - Supply Technician 18.59 01420 - Survey Worker 13.66 01460 - Switchboard Operator/Receptionist 12.14 01531 - Travel Clerk I 12.17 01532 - Travel Clerk II 12.94 01533 - Travel Clerk III 13.73 01611 - Word Processor I 11.92 01612 - Word Processor II 13.38 01613 - Word Processor III 14.97 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 18.15 05010 - Automotive Electrician 17.96 05040 - Automotive Glass Installer 17.12 05070 - Automotive Worker 17.12 05110 - Mobile Equipment Servicer 15.36 05130 - Motor Equipment Metal Mechanic 18.82 05160 - Motor Equipment Metal Worker 17.12 05190 - Motor Vehicle Mechanic 18.82 05220 - Motor Vehicle Mechanic Helper 14.52 05250 - Motor Vehicle Upholstery Worker 16.24 05280 - Motor Vehicle Wrecker 17.12 05310 - Painter Automotive 17.96 05340 - Radiator Repair Specialist 17.12 05370 - Tire Repairer 12.66 05400 - Transmission Repair Specialist 18.82 07000 - Food Preparation And Service Occupations 07010 - Baker 11.48 07041 - Cook I 12.40 07042 - Cook II 14.25 07070 - Dishwasher 10.11 07130 - Food Service Worker 10.63 07210 - Meat Cutter 14.44 07260 - Waiter/Waitress 9.48 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 18.35 09040 - Furniture Handler 15.04 09080 - Furniture Refinisher 20.19 09090 - Furniture Refinisher Helper 17.61 09110 - Furniture Repairer Minor 19.97 09130 - Upholsterer 20.19 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 11.13 11060 - Elevator Operator 11.56 11090 - Gardener 14.74 11122 - Housekeeping Aide 11.56 11150 - Janitor 11.56 11210 - Laborer Grounds Maintenance 11.68 11240 - Maid or Houseman 10.92 11260 - Pruner 10.68 11270 - Tractor Operator 13.65 11330 - Trail Maintenance Worker 11.68 11360 - Window Cleaner 12.84 12000 - Health Occupations 12010 - Ambulance Driver 14.37 12011 - Breath Alcohol Technician 17.19 12012 - Certified Occupational Therapist Assistant 23.58 12015 - Certified Physical Therapist Assistant 19.38 12020 - Dental Assistant 17.23 12025 - Dental Hygienist 33.44 12030 - EKG Technician 26.04 12035 - Electroneurodiagnostic Technologist 26.04 12040 - Emergency Medical Technician 14.37 12071 - Licensed Practical Nurse I 15.36 12072 - Licensed Practical Nurse II 17.19 12073 - Licensed Practical Nurse III 19.15 12100 - Medical Assistant 14.75 12130 - Medical Laboratory Technician 21.03 12160 - Medical Record Clerk 17.13 12190 - Medical Record Technician 19.19 12195 - Medical Transcriptionist 15.15 12210 - Nuclear Medicine Technologist 37.75 12221 - Nursing Assistant I 11.32 12222 - Nursing Assistant II 12.73 12223 - Nursing Assistant III 13.89 12224 - Nursing Assistant IV 15.60 12235 - Optical Dispenser 16.34 12236 - Optical Technician 15.36 12250 - Pharmacy Technician 16.41 12280 - Phlebotomist 15.60 12305 - Radiologic Technologist 25.62 12311 - Registered Nurse I 22.55 12312 - Registered Nurse II 27.59 12313 - Registered Nurse II Specialist 27.59 12314 - Registered Nurse III 33.38 12315 - Registered Nurse III Anesthetist 33.38 12316 - Registered Nurse IV 40.00 12317 - Scheduler (Drug and Alcohol Testing) 21.28 12320 - Substance Abuse Treatment Counselor 19.77 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 15.11 13012 - Exhibits Specialist II 18.68 13013 - Exhibits Specialist III 22.89 13041 - Illustrator I 14.90 13042 - Illustrator II 18.46 13043 - Illustrator III 22.59 13047 - Librarian 20.44 13050 - Library Aide/Clerk 11.87 13054 - Library Information Technology Systems 18.46 Administrator 13058 - Library Technician 14.45 13061 - Media Specialist I 13.48 13062 - Media Specialist II 14.90 13063 - Media Specialist III 16.62 13071 - Photographer I 13.62 13072 - Photographer II 15.24 13073 - Photographer III 18.89 13074 - Photographer IV 23.10 13075 - Photographer V 27.95 13090 - Technical Order Library Clerk 15.49 13110 - Video Teleconference Technician 12.54 14000 - Information Technology Occupations 14041 - Computer Operator I 14.10 14042 - Computer Operator II 15.85 14043 - Computer Operator III 17.59 14044 - Computer Operator IV 19.49 14045 - Computer Operator V 21.71 14071 - Computer Programmer I (see 1) 19.46 14072 - Computer Programmer II (see 1) 24.12 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 15.51 14160 - Personal Computer Support Technician 22.57 14170 - System Support Specialist 28.86 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 30.93 15020 - Aircrew Training Devices Instructor (Rated) 37.42 15030 - Air Crew Training Devices Instructor (Pilot) 43.93 15050 - Computer Based Training Specialist / Instructor 30.93 15060 - Educational Technologist 29.38 15070 - Flight Instructor (Pilot) 43.93 15080 - Graphic Artist 19.72 15085 - Maintenance Test Pilot Fixed Jet/Prop 43.52 15086 - Maintenance Test Pilot Rotary Wing 43.52 15088 - Non-Maintenance Test/Co-Pilot 43.52 15090 - Technical Instructor 17.62 15095 - Technical Instructor/Course Developer 21.55 15110 - Test Proctor 14.22 15120 - Tutor 14.22 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 9.95 16030 - Counter Attendant 9.95 16040 - Dry Cleaner 11.36 16070 - Finisher Flatwork Machine 9.95 16090 - Presser Hand 9.95 16110 - Presser Machine Drycleaning 9.95 16130 - Presser Machine Shirts 9.95 16160 - Presser Machine Wearing Apparel Laundry 9.95 16190 - Sewing Machine Operator 11.96 16220 - Tailor 12.59 16250 - Washer Machine 10.42 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.90 19040 - Tool And Die Maker 29.66 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 15.80 21030 - Material Coordinator 19.12 21040 - Material Expediter 19.12 21050 - Material Handling Laborer 12.78 21071 - Order Filler 10.24 21080 - Production Line Worker (Food Processing) 15.80 21110 - Shipping Packer 14.68 21130 - Shipping/Receiving Clerk 14.68 21140 - Store Worker I 11.76 21150 - Stock Clerk 16.01 21210 - Tools And Parts Attendant 15.80 21410 - Warehouse Specialist 15.80 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 26.81 23019 - Aircraft Logs and Records Technician 20.96 23021 - Aircraft Mechanic I 25.35 23022 - Aircraft Mechanic II 26.81 23023 - Aircraft Mechanic III 28.27 23040 - Aircraft Mechanic Helper 18.07 23050 - Aircraft Painter 23.90 23060 - Aircraft Servicer 20.96 23070 - Aircraft Survival Flight Equipment Technician 23.90 23080 - Aircraft Worker 22.42 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.42 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 25.35

II

23110 - Appliance Mechanic 23.90 23120 - Bicycle Repairer 15.17 23125 - Cable Splicer 38.42 23130 - Carpenter Maintenance 16.26 23140 - Carpet Layer 22.42 23160 - Electrician Maintenance 21.44 23181 - Electronics Technician Maintenance I 22.42 23182 - Electronics Technician Maintenance II 23.90 23183 - Electronics Technician Maintenance III 25.35 23260 - Fabric Worker 20.96 23290 - Fire Alarm System Mechanic 25.35 23310 - Fire Extinguisher Repairer 19.52 23311 - Fuel Distribution System Mechanic 29.56 23312 - Fuel Distribution System Operator 21.02 23370 - General Maintenance Worker 17.85 23380 - Ground Support Equipment Mechanic 25.35 23381 - Ground Support Equipment Servicer 20.96 23382 - Ground Support Equipment Worker 22.42 23391 - Gunsmith I 19.52 23392 - Gunsmith II 22.42 23393 - Gunsmith III 25.35 23410 - Heating Ventilation And Air-Conditioning 18.64 Mechanic 23411 - Heating Ventilation And Air Contidioning 19.59 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.35 23440 - Heavy Equipment Operator 21.22 23460 - Instrument Mechanic 25.35 23465 - Laboratory/Shelter Mechanic 23.90 23470 - Laborer 11.18 23510 - Locksmith 23.90 23530 - Machinery Maintenance Mechanic 26.91 23550 - Machinist Maintenance 20.21 23580 - Maintenance Trades Helper 18.07 23591 - Metrology Technician I 25.35 23592 - Metrology Technician II 26.81 23593 - Metrology Technician III 28.27 23640 - Millwright 25.35 23710 - Office Appliance Repairer 23.90 23760 - Painter Maintenance 15.16 23790 - Pipefitter Maintenance 20.76 23810 - Plumber Maintenance 18.87 23820 - Pneudraulic Systems Mechanic 25.35 23850 - Rigger 25.35 23870 - Scale Mechanic 22.42 23890 - Sheet-Metal Worker Maintenance 23.82 23910 - Small Engine Mechanic 22.42 23931 - Telecommunications Mechanic I 29.74 23932 - Telecommunications Mechanic II 31.45 23950 - Telephone Lineman 22.80 23960 - Welder Combination Maintenance 16.83 23965 - Well Driller 20.24 23970 - Woodcraft Worker 25.35 23980 - Woodworker 19.52 24000 - Personal Needs Occupations 24550 - Case Manager 12.02 24570 - Child Care Attendant 9.50 24580 - Child Care Center Clerk 11.85 24610 - Chore Aide 11.80 24620 - Family Readiness And Support Services 12.02 Coordinator 24630 - Homemaker 15.28 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 25.35 25040 - Sewage Plant Operator 20.67 25070 - Stationary Engineer 25.35 25190 - Ventilation Equipment Tender 18.07 25210 - Water Treatment Plant Operator 20.67 27000 - Protective Service Occupations 27004 - Alarm Monitor 16.40 27007 - Baggage Inspector 12.04 27008 - Corrections Officer 16.70 27010 - Court Security Officer 16.96 27030 - Detection Dog Handler 13.98 27040 - Detention Officer 16.70 27070 - Firefighter 18.19 27101 - Guard I 12.04 27102 - Guard II 13.98 27131 - Police Officer I 19.73 27132 - Police Officer II 21.93 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.38 28042 - Carnival Equipment Repairer 14.45 28043 - Carnival Worker 10.12 28210 - Gate Attendant/Gate Tender 17.33 28310 - Lifeguard 11.01 28350 - Park Attendant (Aide) 19.40 28510…