Sole Source_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE (SAP <$150k) Ref: FAR 13.106 and NAVSUP 4200.85D Chapter 5 Para. 2.b.(5)

The service or material listed on (Document number)0084-0014 is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below.

There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: Teledyne Marine________________ Manufacturer POC & Phone Nr._Tara Reischl, 1-603-760-5611_________ Mfr. Address_162 Corporate Drive, Portsmouth, NH 03801___________ Manufacturers Dealer/Rep_________________________________________________ Dealer/Rep Address/Phone Number__________________________________________

_X__Description of the item or service required, the estimated cost, and required delivery date.

_Penetrator inboard plug assembly-right angle, using MIL-C-24643 cable, part number CPG1025-7-109C, Teledyne DGO part number 1150876-101 // 102 FT. LSTTSU-15 cable length//

_X__Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

__Drawing 4642506 Revision H, item 81 specifies the inboard cable connected to EHF-77 is CPG1025/7-109C. Teledyne DGO is the only vendor that returned a bid. The only other vendor capable is L. L. Rowe, which is now part of SEACON, came back with a no bid quote.

The cable was originally made by Electric Boat.

_X__The requested material or service represents the minimum requirements of the government

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

__X__The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

__Cable assembly for C-2ML1 connects to existing Electrical Hull Penetrator EHF-77 which is part number CPG1025-1-109. Cable C-2ML1 is required to be part number CPG1025-7-109C in order to be compatible with EHF-77.

___A patent, copyright, or proprietary data limits competition. The proprietary data is:

__X__These are “direct replacements” parts/components for existing brand name equipment.

____Other information to support a sole-source buy:

_The currently installed cable C-2ML1 plug assembly is CPG1025-7-109C, with a DGO part number of 1150876-101

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Signature Activity_ PSNS & IMF, __

Title__ ____ Date___ _________________

Contracting Officer Signature________________________________ Date__________________

FISCPS 4200/180 (Rev. 10/1/10)