Sol_140R4026Q0091.pdf

United States Department of the Interior

BUREAU OF RECLAMATION

125 South State Street, Room 8100 Salt Lake City, UT 84138-1102

Combined Synopsis/Solicitation

Solicitation Number: 140R4026Q0091

Notice Type: Combined Synopsis/Solicitation

NAICS Code: 334516

Small Business Size Standard: 1,000 in number of employees

Set-Aside: Small Business

Issuing Office: DOI/UCB

Date of Publication: June 9, 2026

Response Due Date: June 19, 2026, by 5:00PM Eastern.

Description:

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with FAR Part 12. This announcement constitutes the only solicitation;

offers are being requested, and a separate written solicitation will not be issued.

Solicitation number 140R4026Q0091 is issued as a request for quotation (RFQ), for a Q-FOG SSP-600 Cyclic Corrosion Chamber or Equal.

This acquisition is set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

Statement of Work/Specification:

1. Background:

140R4026Q0091 - Salt Fog Chamber Page 1 of 18 http://www.acquisition.gov/

Reclamation’s Materials and Corrosion Laboratory (MCL) is purchasing a Q-FOG SSP-600 cyclic corrosion chamber. MCL conducts testing on coating to assess their ability to provide corrosion protection. ASTM standardized tests are used to evaluate coatings including ASTM B117 and ASTM G85. Currently the MCL has a previous model of the Q-FOG SSP-600 from 2012, but the device has become susceptible to part failures and breaking. The salt fog chamber is reaching the end of its service life and is due for replacement.

2. Scope of Work:

The goal of this procurement is to purchase Q-FOG SSP-600 Cyclic Corrosion Chamber or Equal.

• The dedicated spot for the device is 78 inches (in.) wide and 50 inches deep. Existing power supply is 208 Volts (Volts), 1 phase, 60 Hurtz (Hz), 20Amps (A). It is desired to purchase a salt fog chamber that fits in the existing footprint and does not require modification to the power source.

• Dimensions of desired chamber

• (W * D * H): (74in * 44in * 48in)

• Tank size capable of holding 120 Liter (L) of salt solution.

• Power pull <20A for 208V.

• Ability to hold 150 or more test samples 3in x 6in steel coupons.

• Volume of test chamber equal or greater than 600 L (18 cubic feet (ft3))

• Task: Test coated steel coupons and similar samples in accordance with ASMT B117 and

ASTM G85 standardized tests.

For the complete scope of work, see the attached Statement of Work

3. Quality Requirements:

The Government expects the contractor to use its existing quality assurance system to ensure products and services meet the requirements of this solicitation. Commercial warranties will be taken advantage of to the maximum extent practicable.

4. Delivery/Period of Performance:

The supplier is responsible for delivering the entire system to the loading dock at entrance S-6 of Building 56 on the Denver Federal Center in Denver, Colorado – this type of international delivery is sometimes referred to as “Delivered to Place.” The supplier is responsible for ensuring the system is undamaged during the shipping process and comes equipped with all required parts.

• Date(s) and Place(s) of Delivery and Acceptance:

The equipment is to be delivered to:

[POC will be provided at award]

140R4026Q0091 - Salt Fog Chamber Page 2 of 18

Building 56, Door S-6 Bureau of Reclamation Denver Federal Center Denver, CO 80225

The system shall be ready to be delivered within 90 days of contract award.

• F.O.B. Point: FOB Destination

Contract Type:

The Government intends to award a firm-fixed-price contract.

Instructions to Offerors:

1. Submission Requirements: Offers must be submitted electronically to the Contracting Officer, ConnieAnn Tudela-Kately at connieann_tudela-kately@ios.doi.gov by 5:00PM Eastern.

Late submissions will not be considered.

2. Proposal Content: At a minimum, your proposal must include the following:

• Technical Capability: A narrative demonstrating your ability to meet the requirements of the Statement of Work.

• Price: A detailed price proposal for all line items, including any options. Prices shall be firm-fixed-price.

o Fill in Price Schedule below

• Past Performance: Provide information on recent (within 3 years) and relevant contracts.

• Representations and Certifications: A statement confirming that you have completed all applicable representations and certifications in the System for Award Management (SAM) at SAM.gov. Offerors must be registered in SAM at the time of award.

Evaluation and Award:

The Government will award a purchase order to the responsible offeror whose offer, conforming to the solicitation, is most advantageous to the Government, considering the following factors:

• Technical Capability

• Past Performance

• Price

The Government reserves the right to make an award without discussions.

140R4026Q0091 - Salt Fog Chamber Page 3 of 18 mailto:connieann_tudela-kately@ios.doi.gov

Price Schedule:

CLIN 00010

Description/ mfg# Quantity UOM Price Per Unit

Total Price

Q-Lab Corporation Q-FOG SSP 600 Liter Gen 4 with Panel Holder Kit for 600L chambers, 15 Deg.

1 EA $ $

CLIN 00020

Description/ mfg# Quantity UOM Price Per Unit

Total Price

Shipping/freight 1 AU $ $

Attachments:

Attachment 1: SOW - TSC IIJA 8540 Salt fog chamber

Attachment 2: LF-8110_Q-FOG_Specifications

140R4026Q0091 - Salt Fog Chamber Page 4 of 18

Applicable Provisions and Clauses:

The following provisions and clauses are applicable to this acquisition and are incorporated by reference. The full text can be found at https://www.acquisition.gov/browse/index/far and https://www.acquisition.gov/far-overhaul/far-part-deviation-guide

Clauses FAR 52.212-4 Terms and Conditions—Commercial Products and Commercial Services (RFO DEVIATION

MAR 2026).

---Addendum to 52.212-4---

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-INVOICE

PROCESSING PLATFORM (IPP) (FEB 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor.

To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is:

https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

The Contractor shall submit an electronic copy of the IPP invoice to the Christopher Zurkan, Supply Specialist, at czurkan@usbr.gov and obtain his signature prior to submitting to IPP. The physical invoice signed by the, Supply Specialist, must be included in the IPP submission. Failure to attach the signed invoice may cause significant delay or possible rejection of your payment request.

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment.

The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

FAR 52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (RFO DEVIATION

MAR 2026).

140R4026Q0091 - Salt Fog Chamber Page 5 of 18

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

(End of clause)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020).

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

--- End of Addendum to 52.212-4---

FAR 52.204-10 Reporting Executive Compensation and First-Tier Subcontract Awards (RFO DEVIATION MAR 2026) (Pub. L. 109-282) (31 U.S.C. 6101 note).

FAR 52.203-17 Contractor Employee Whistleblower Rights (Nov 2023).

FAR 52.209-10 Prohibition on Contracting With Inverted Domestic Corporations (RFO DEVIATION

MAY 2026).

FAR 52.219-6 Notice of Total Small Business Set-Aside (RFO DEVIATION JAN 2026)(15 U.S.C.

644).

FAR 52.219-28 Post Award Small Business Program Representation (RFO DEVIATION JAN 2026) (15 U.S.C. 632(a)(2)).

FAR 52.222-19, Child Labor-Cooperation with Authorities and Remedies (RFO DEVIATION MAY 2026).

140R4026Q0091 - Salt Fog Chamber Page 6 of 18

FAR 52.222-50 Combating Trafficking in Persons (RFO DEVIATION MAY 2026) (22 U.S.C. chapter 78 and E.O. 13627).

FAR 52.223-23 Sustainable Products (RFO DEVIATION MAY 2026)

(a) Definitions. As used in this clause—

Sustainable product means—

(1) A product that contains recovered material designated by the EPA under the Comprehensive Procurement Guidelines (42 U.S.C. 6962) (40 CFR part 247) (https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#products).

(2) An energy-efficient product or low standby power device (42 U.S.C. 8259b) (10 CFR part 436, subpart C) (https://www.energy.gov/eere/femp/search-energy-efficient-products, https://www.energystar.gov/products?s=mega, and https://www.energy.gov/femp/low-standby-power-product-list).

(3) A biobased product that meets the content requirements of the USDA under the BioPreferred® program (7 U.S.C. 8102) (7 CFR Part 4270) (https://www.biopreferred.gov/).

(4) A substance identified in the EPA’s Significant New Alternatives Policy (SNAP) program as a safe alternative to an ozone-depleting substance (42 U.S.C. 7671l) (40 CFR part 82, subpart G) (https://www.epa.gov/snap/unacceptable-and-acceptable-substitutes-tables).

(b) Requirements. The Government has identified in the statement of work or elsewhere in the contract the sustainable products that are required during the performance of this contract. The Contractor shall ensure that it provides sustainable products as required by this contract, when the products are—

(1) Delivered to the Government;

(2) Furnished for use by the Government;

(3) Incorporated into the construction of a public building or public work; or

(c) Furnished for use in performing services under this contract, where the cost of the products is a direct cost to this contract.

(End of clause)

FAR 52.225-1 Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

[X]FAR 52.225-13 Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

FAR 52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving (MAR 2026) (E.O. 13513).

[X]FAR 52.232-33 Payment by Electronic Funds Transfer-System for Award Management

(OCT2018) (31 U.S.C. 3332).

FAR 52.240-90 Security Prohibitions and Exclusions Representations and Certifications (RFO

DEVIATION MAR 2026).

FAR 52.240-91 Security Prohibitions and Exclusions (RFO DEVIATION MAR 2026).

140R4026Q0091 - Salt Fog Chamber Page 7 of 18 https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#products https://www.epa.gov/smm/comprehensive-procurement-guideline-cpg-program#products https://www.energy.gov/eere/femp/search-energy-efficient-products https://www.energystar.gov/products?s=mega https://www.energy.gov/femp/low-standby-power-product-list https://www.energy.gov/femp/low-standby-power-product-list https://www.biopreferred.gov/ https://www.epa.gov/snap/unacceptable-and-acceptable-substitutes-tables

FAR 52.244-6 Subcontracts for Commercial Products and Commercial Services (RFO DEVIATION

MAY 2026).

Provisions

FAR 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (RFO

DEVIATION MAR 2026).

FAR 52.219-1 Small Business Program Representations (RFO DEVIATION MAY 2026).

FAR 52.222-3 Convict Labor (RFO DEVIATION MAY 2026).

FAR 52.222-36, Equal Opportunity for Workers with Disabilities (RFO DEVIATION MAY 2026) (29 U.S.C.

793).

---Addendum to 52.212-1---

FAR 52.204-7 SYSTEM FOR AWARD MANAGEMENT (RFO DEVIATION MAR 2026).

DIAR 1452.215-71 USE AND DISCLOSURE OF PROPOSAL INFORMATION -- DEPARTMENT OF

THE INTERIOR (APR 1984)

(a) Definitions. For the purposes of this provision and the Freedom of Information Act (5 U.S.C. 552), the following terms shall have the meaning set forth below:

(1) "Trade Secret" means an unpatented, secret, commercially valuable plan, appliance, formula, or process, which is used for making, preparing, compounding, treating or processing articles or materials which are trade commodities.

140R4026Q0091 - Salt Fog Chamber Page 8 of 18

(2) "Confidential commercial or financial information" means any business information (other than trade secrets) which is exempt from the mandatory disclosure requirement of the Freedom of Information Act, 5 U.S.C. 552. Exemptions from mandatory disclosure which may be applicable to business information contained in proposals include exemption (4), which covers "commercial and financial information obtained from a person and privileged or confidential," and exemption (9), which covers "geological and geophysical information, including maps, concerning wells."

(b) If the offeror, or its subcontractor(s), believes that the proposal contains trade secrets or confidential commercial or financial information exempt from disclosure under the Freedom of Information Act, (5 U.S.C. 552), the cover page of each copy of the proposal shall be marked with the following legend:

"The information specifically identified on pages ______ of this proposal constitutes trade secrets or confidential commercial and financial information which the offeror believes to be exempt from disclosure under the Freedom of Information Act. The offeror requests that this information not be disclosed to the public, except as may be required by law. The offeror also requests that this information not be used in whole or part by the government for any purpose other than to evaluate the proposal, except that if a contract is awarded to the offeror as a result of or in connection with the submission of the proposal, the Government shall have the right to use the information to the extent provided in the contract."

(c) The offeror shall also specifically identify trade secret information and confidential commercial and financial information on the pages of the proposal on which it appears and shall mark each such page with the following legend:

"This page contains trade secrets or confidential commercial and financial information which the offeror believes to be exempt from disclosure under the Freedom of Information Act and which is subject to the legend contained on the cover page of this proposal."

(d) Information in a proposal identified by an offeror as trade secret information or confidential commercial and financial information shall be used by the Government only for the purpose of evaluating the proposal, except that (i) if a contract is awarded to the offeror as a result of or in connection with submission of the proposal, the Government shall have the right to use the information as provided in the contract, and (ii) if the same information is obtained from another source without restriction it may be used without restriction.

(e) If a request under the Freedom of Information Act seeks access to information in a proposal identified as trade secret information or confidential commercial and financial information, full consideration will be given to the offeror's view that the information constitutes trade secrets or confidential commercial or financial information. The offeror will also be promptly notified of the request and given an opportunity to provide additional evidence and argument in support of its position, unless administratively unfeasible to do

so. If it is determined that information claimed by the offeror to be trade secret information or confidential commercial or financial information is not exempt from disclosure under the Freedom of Information Act, the offeror will be notified of this determination prior to disclosure of the information.

(f) The Government assumes no liability for the disclosure or use of information contained in a proposal if not marked in accordance with paragraphs (b) and (c) of this provision. If a request under the Freedom of Information Act is made for information in a proposal not marked in accordance with paragraphs (b) and (c) of this provision, the offeror concerned shall be promptly notified of the request and given an opportunity to provide its position to the Government. However, failure of an offeror to mark information contained in a proposal as trade secret information or confidential commercial or financial information will be treated by the Government as evidence that the information is not exempt from disclosure under the Freedom of Information Act, absent a showing that the failure to mark was due to unusual or extenuating circumstances, such as a showing that the offeror had intended to mark, but that markings were omitted from the offeror's proposal due to clerical error.

(End of provision)

140R4026Q0091 - Salt Fog Chamber Page 9 of 18

52.252-1, SOLICITATION PROVISIONS INCORPORATED BY REFERENCE (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available.

The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

(End of provision)

52.252-5 AUTHORIZED DEVIATIONS IN PROVISIONS (NOV 2020)

(a) The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

(b) The use in this solicitation of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) provision with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

---End of Addendum to 52.212-1---

FAR 52.212-2 Evaluation—Commercial Products and Commercial Services (RFO DEVIATION MAR 2026).

(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:

• Technical Capability • Past Performance • Price

(b) Options (if applicable). The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).

(c) Notice of award. A written notice of award or acceptance of an offer furnished to the successful Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of

140R4026Q0091 - Salt Fog Chamber Page 10 of 18 an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

---Addendum to 52.212-2---

FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors (RFO DEVIATION MAY 2026).

---End of Addendum to 52.212-2---

140R4026Q0091 - Salt Fog Chamber Page 11 of 18

STATEMENT OF WORK

Title: TSC IIJA 8540 Salt Fog Chamber Requestor: Carter Gulsvig cgulsvig@usbr.gov

1.0 Background

Reclamation’s Materials and Corrosion Laboratory (MCL) is purchasing a Q-FOG SSP-600 cyclic corrosion chamber. MCL conducts testing on coating to assess their ability to provide corrosion protection. ASTM standardized tests are used to evaluate coatings including ASTM B117 and ASTM G85. Currently the MCL has a previous model of the Q-FOG SSP-600 from 2012, but the device has become susceptible to part failures and breaking. The salt fog chamber is reaching the end of its service life and is due for replacement.

2.0 Scope

The scope is to acquire a commercially available laboratory grade, off the shelf, Q-FOG SSP-600 Cyclic Corrosion Chamber including shipping.

3.0 Objectives

The goal of this procurement is to purchase Q-FOG SSP-600 Cyclic Corrosion Chamber.

The dedicated spot for the device is 78 inches (in.) wide and 50 inches deep. Existing power supply is 208 Volts (Volts), 1 phase, 60 Hurtz (Hz), 20Amps (A). It is desired to purchase a salt fog chamber that fits in the existing footprint and does not require modification to the power source.

Dimensions of desired chamber (W * D * H): (74in * 44in * 48in)

Tank size capable of holding 120 Liter (L) of salt solution.

Power pull <20A for 208V.

Ability to hold 150 or more test samples 3in x 6in steel coupons.

Volume of test chamber equal or greater than 600 L (18 cubic feet (ft3))

4.0 Tasks

• The tasks will be to test coated steel coupons and similar samples in accordance with ASMT B117 and ASTM G85 standardized tests.

5.0 Delivery

Attachment 1: SOW - TSC IIJA 8540 Salt fog chamber

140R4026Q0091 - Salt Fog Chamber Page 12 of 18 mailto:cgulsvig@usbr.gov

The supplier is responsible for delivering the entire system, as detailed in the Tasks Section, to the loading dock at entrance S-6 of Building 56 on the Denver Federal Center in Denver, Colorado – this type of international delivery is sometimes referred to as “Delivered to Place.” The supplier is responsible for ensuring the system is undamaged during the shipping process and comes equipped with all required parts.

6.0 Qualifications

The Contractor must have at least 5 years in business manufacturing cyclical corrosion chambers.

6.0 Government-Furnished Property

The Government is furnishing water supply, power supply, compressed air supply and ventilation for the testing chamber.

7.0 Security

The Supplier is responsible for ensuring the shipment passes all security requirements.

The supplier will need to provide all necessary documentation to pass all security checks.

8.0 Place of Performance

The equipment is to be delivered to:

[POC will be provided at award] Building 56, Door S-6 Bureau of Reclamation Denver Federal Center Denver, CO 80225

9.0 Period of Performance

The system shall be ready to be delivered within 90 days of contract award.

10.0 Photos of Possible Q-FOG SSP-600 Cyclical Corrosion Cabinet “Or Equal”

140R4026Q0091 - Salt Fog Chamber Page 13 of 18

140R4026Q0091 - Salt Fog Chamber Page 14 of 18

140R4026Q0091 - Salt Fog Chamber Page 15 of 18

140R4026Q0091 - Salt Fog Chamber Page 16 of 18

S P

E C

IF

IC

A T

IO

N

B U

L L

E T

IN

L F

-8

Cyclic

Corrosion Tester

Features Q-FOG corrosion test chambers deliver the precise volume and uniformity of fog called for in major cor-rosion test standards. Variable relative humidity control is also available as an option, as is shower capa-bility. Q-FOG testers can be configured with optional features like the Rapid Ramp Heater, Top-Mounted Swaying Shower Bar, and Wall Wash, to meet almost any testing need. Q-FOG internal chambers are constructed of reinforced fiberglass to avoid corrosion. Dual, full-color touchscreen displays allow for easy user programming and operation, available in 17 languages. The Q-FOG Gen 4 system includes complete self-diagnostics, including warning messages, routine service reminders, and safety shut down.

Model SSP for Prohesion or Conventional Salt Spray Tests The Q-FOG SSP corrosion tester can perform numerous accelerated corrosion tests, including continuous salt spray (ASTM B117 and ISO 9227) and Prohesion (ASTM G85 Annex 5). The Prohesion test uses fast cycling, rapid temperature changes, a low humidity dry-off cycle, and a different corrosive solution to provide a realistic test.

Model CCT for Corrosion Research and Cyclic Automotive Tests The Q-FOG model CCT has all the advantages of the model SSP, but adds the flexibility of including a 95-100% Humid Function. The Q-FOG CCT model can meet many automotive corrosion test methods that require exposing specimens to a repetitive cycle of salt spray, high humidity, low humidity dry-off, and ambient conditions. Additionally, the CCT model is able to run Copper-Accelerated Acetic-Acid Salt Spray (CASS) tests such as ASTM B368 or ISO 9227 CASS.

Model CRH for Cyclic Automotive Tests with Variable Relative Humidity (RH) Control The Q-FOG model CRH meets most major modern automotive corrosion test standards, such as GMW 14872, Ford L-467, SAE J2334, Renault ECC1, and others from ISO, VW, Volvo, Chrysler, and others. It allows for full variable relative humidity control through the use of an innovative Air Preconditioner. In addition to salt fog, CRH models feature fully-programmable stationary or top-mounted swaying shower features that can quickly apply salt solution. The Rapid Ramp Heater option allows for fast transitions between different chamber conditions to comply with difficult-to-meet test methods like JASO M609, even with a fully-loaded chamber.

SSP CCT CRH

Two sizes available (600 and 1100 liter)

Dual full-color touch-screen displays

Internal 120 liter salt solution reservoir

Monitoring window & internal viewing light

Internal chamber heaters for fast temperature cycling

Salt Fog Function (atomizing mist)

Dry Function (< 30% relative humidity)

Humid Function (95-100% relative humidity)

RH Function (relative humidity control via Air Preconditioner)

Wall Wash Kit (for compliance with Renault ECC1) 2

Stationary Shower Module (with self-cleaning spray nozzles) 21

Top-Mounted Swaying Shower (with self-cleaning spray nozzles) 22

Rapid Ramp Heaters (for fast temperature/RH transitions) 23

Access Port (100 mm diameter for wiring access in chamber) 2 2 2

External Fog Collection Cylinders 2 2 2

Q-FOG Overview Q-FOG® cyclic corrosion chambers from Q-Lab can perform continuous salt spray, Prohesion, and nearly all cyclic auto-motive corrosion tests. Q-FOG chambers are available in two sizes to fulfill a wide range of testing requirements. Q-FOG cyclic corrosion testers are the simplest, most reliable, and easiest-to-use corrosion testers available.

Standard Feature 2 Optional Feature 1: -S models only 2: -T models only 3: -R models only

Attachment 2: LF-8110_Q-FOG_Specifications 140R4026Q0091 - Salt Fog Chamber Page 17 of 18

LF-8110.21 © 2024 Q-Lab Corporation. All Rights Reserved. See Q-Lab.com/Trademarks for trademark information.

Prohesion is an exclusive trademark of Croda Mebon Ltd. All Q-FOG chambers are CE marked.

Operating Specifications:

Warranty For important warranty information, visit Q-Lab.com/Warranty.

Models1 SSP600, CCT600

CRH600

(-HSC, -HTC)

CRH600

(-HSCR, -HTCR)

SSP1100,

CCT1100

CRH1100

(-HSC, -HTC)

CRH1100

(-HSCR, -HTCR)

Chamber Size2

Volume (including lid) Volume (excluding lid) Built-in salt solution reservoir

~600 liters (21 ft3) ~500 liters (18 ft3 ) ~120 liters (32 gal)

~1100 liters (39 ft3) ~900 liters (32 ft3) ~120 liters (32 gal)

Chamber Temp Range3

Fog or Dwell4

Dry-Off4

Humid/RH4

Shower

20-60 °C 20-70 °C 25-60 °C

20-60 °C 20-70 °C

20-50 °C

20-70 °C 25-60 °C

20-60 °C 20-70 °C 20-60 °C 20-50 °C

Specimen Panel Capacity5

120 (96 for -T models) @ 8 racks 170 (160 for -T models) @ 10 racks

190 (160 for -T models) @ 10 racks 252 (240 for -T models) @ 12 racks

Specimen Load Capacity

113 kg (250 lbs) max 45 kg (100 lbs) max

272 kg (600 lbs) max 544 kg (1200 lbs) max

Inlet Water Purity6 >200 kΩ∙cm;

<5 μS/cm <2.5 ppm TDS

>1 MΩ∙cm;

<1.0 μS/cm

<0.5 ppm TDS

>200 kΩ∙cm;

<5 μS/cm

<2.5 ppm TDS

>1 MΩ∙cm;

<1.0 μS/cm

<0.5 ppm TDS

Inlet Water Pressure6,7 0.2-3.8 bar (3-56 psi) 0.6-3.8 bar (9-56 psi) 0.2-3.8 bar (3-56 psi) 0.6-3.8 bar (9-56 psi)

Water Consumption8 2 L/h max 5 L/h max 2 L/h max 5 L/h max

Drain9 32 mm (1-¼ in) tubing with trap

Air Vent9 102 mm (4 in) inner diameter min

Compressed Air Maximum volume

Pressure

1.7 L/s (3.5 cfm)

3-10 bar (40-150 psi)

4-10 bar (60-150 psi)

3-10 bar (40-150 psi)

4-10 bar (60-150 psi)

Chamber Internal Dims2

110 × 71 × 73 cm (43 × 28 × 29 in) 108 × 61 × 73 cm (43 × 24 × 29 in)

147 × 87 × 72 cm (58 × 34 × 28 in) 144 × 77 × 72 cm (57 × 30 × 28 in)

External Dimensions10 w × d × h (lid closed) 189 × 113 × 122 cm (74 × 44 × 48 in)

328 × 107 × 126 cm (129 × 42 × 50 in)

225 × 129 × 127 cm (88 × 51 × 50 in)

365 × 125 × 131 cm (144 × 50 × 52 in)

Weight 224 kg (494 lbs) 333 kg (734 lbs) 269 kg (594 lbs) 378 kg (834 lbs)

Electrical11

Requirements

208 V 1- @ 16 A 1- @ 32 A 3- @ 28 A 1- @ 20 A 1- @ 38 A 3- @ 44 A

230 V 1- @ 14 A 1- @ 32 A 3- @ 25 A 1- @ 18 A 1- @ 38 A 3- @ 39 A

400 V — — 3- @ 15 A — — 3- @ 24 A

Lab Recommendations12 Temperature (°C)

Relative Humidity (%)

23 ± 5 °C 50 ± 25%

cies between test parameters.

4) In CRH models, relative humidity (RH) control feature replaces the Dwell, Humid, and Dry-Off functions. Model CCT features a 95-100% RH function; model SSP does not have high RH capability. See technical manual for more detailed information, including RH performance versus lab conditions.

the wet bulb wick (for RH measurement/control). Lower-purity water may be used, but will require more frequent wick changes and the potential for erroneous RH readings.

accommodate maximum peak demand during short duration bubble tower refill step at 0.4 L/min.

behind the CRH tester or elsewhere with an optional kit. Air Preconditioner dimensions (w × d × h) are 82 × 93 × 101 cm (32 × 37 × 39 in) ; weight is 91 kg (200 lb).

For sales, technical, or repair support, please visit:

Westlake, Ohio USA • Homestead, Florida USA • Wittmann, Arizona USA Bolton, England • Saarbrücken, Germany • Shanghai, China

Q-Lab.com/support

140R4026Q0091 - Salt Fog Chamber Page 18 of 18 http://Q-Lab.com/Trademarks http://Q-Lab.com/warranty