Sol_140R2024Q0026.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

R20

See Schedule

CODE 16. ADMINISTERED BYCODE

X

X

332710

SIZE STANDARD:

% FOR:SET ASIDE:UNRESTRICTED ORR20

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

01/31/2024 1300 PS

01/25/2024

9169785291Rashayla Brown (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

140R2024Q0026

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 32 OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

15. DELIVER TO

Sacramento CA 95825-1898 2800 Cottage Way, Room E-1815 Division of Acquisition Services Regional Office Mid-Pacific Region

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULE

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

Bureau of Reclamation

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

ADMINISTERED BY:

Bureau of Reclamation Mid-Pacific Region Regional Office Division of Acquisition Services 2800 Cottage Way, Room E-1815 Sacramento CA 95825-1898 US Period of Performance: 02/15/2024 to 02/14/2025

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

Margaret Jones

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32 2 of

The Bureau of Reclamation intends to negotiate on a sole source basis with Kingsbury, Inc to measure, refurbish, and modify Large Vertical Hydro Generator Bearings at the Folsom Powerplant under the authority of FAR 13.106-1(b)(1). A sole source justification has been prepared in support of this acquisition.

GENERAL INFORMATION

RFQ Number: 140R2024Q0026

Request for Quotation (RFQ) Request for Proposal

(RFP) Invitation for Bid

(IFB)

North American Industry Classification Code

(NAICS):

541350 Size Standard: $16.5M

Competition: 100% SMALL BUSINESS SET-ASIDE

QUOTES DUE: January 31, 2024 at 1:00 PM Pacific Standard Time

EMAIL TO: rbrown@usbr.gov

Business Information:

Business Name: _______________________________

Cage Code: ______________________

UEID Number: _______________________________ mailto:rbrown@usbr.gov

CLIN

DESCRIPTION OF SERVICES QTY

UNIT

OF

ISSUE

UNIT PRICE

SUBTOTAL

00010

Inspection of Thrust Bearing Shoes 12 EA

00020 Thrust Shoe Additional Services As Needed Re-babbitt Thrust Shoes 12

00030 Thrust Shoe Additional Services As Needed Dye Penetrant Inspection, Ultrasonic Inspection, Modifications on Backside of the Thrust Shoes 12 EA

00040 Assembly and Inspection of Turbine Guide Bearing Ultrasonic Inspection Included 1 EA

00050 Machine Turbine Guide Bearing 1 EA

00060 Turbine Guide Additional Services As Needed Re-babbitt Turbine Bearing 1 EA

00070 Turbine Guide Additonal Services As Needed Skim Cut Turbine Bearing 1 EA

00080 Inspect Upper Guid Bearings 18 EA

00090 Upper Guide Additional Services As Needed Re-babbitt Upper Guide Bearing Replace Rear Insert 18 EA

00100 Drawings 1 EA

Total Price Proposed $

QUOTE/PRICING SCHEDULE

PERFORMANCE WORK STATEMENT

Folsom Powerplant Spare Thrust Bearing Shoes, Turbine Guide Bearing, and Upper Guide Bearings Inspection and Repair

1.0 General

A. This is service contract to inspect and repair twelve (12) thrust bearing shoes (TBS), one (1) turbine guide bearing (TGB), and eighteen (18) upper guide bearings (UGB) for the Central California Area Office of the California Great Basin Region, Bureau of Reclamation.

2.0 Background

A. There are twelve (12) spare Thrust Bearing Shoes (TBS) that need inspections, re-babbitting if necessary, and high-pressure lube (HPL) system inspection and testing by Kingsbury, Inc. for Folsom Powerplant Unit 1 generator.

B. The Turbine Guide Bearings (TGB) was removed from Folsom Unit 1 in September of 2023, inspected, and requires inspection of babbitt, re-babbitting if necessary, and final machining to match the other existing TGBs installed in the Folsom Powerplant generators.

C. Eighteen (18) Upper Guide Bearings (UGB) were removed from Folsom Unit 1 in August of 2023, inspected, and requires inspection of babbitt, rear pivot point inserts, and final machining; and where necessary re-babbitt, replace inserts, and finish machine to match Folsom Powerplant generators.

3.0 Principal Items of Work

A. Inspect twelve (12) TBS babbitt surface and test the HPL system.

1. Additional services for re-babbitting TBS as needed.

2. Additional services for re-machining and/or replace check valves as needed.

B. Inspect and machine one (1) TGB per specifications.

1. Additional services for re-babbitting TGB as needed.

2. Additional services for skim cut per specifications.

C. Inspect eighteen (18) UGB.

1. Additional services for re-babbitting UGB as needed.

2. Additional services for replacing UGB inserts as needed.

3. Additional services for machining UGB per specifications as needed.

4.0 Administrative Requirements

A. Contractor Furnished Items and Services:

1. The Contractor shall provide all equipment, supplies, management, supervision, personnel, and transportation except as specified herein as Government-Furnished, necessary to assure that all services are in accordance with the contract and all applicable laws and regulations.

2. The Contractor shall ensure all work uses quality workmanship that meets current industry performance standards and standards specified in this Performance of Work Statement (PWS).

B. Government Furnished Property, Equipment, and Services:

1. One (1) set of TGB clamp rings will be provided. The clamp rings will be pre-installed on the TGB and must remain in place for measurements, and machining. The clamp rings should be returned separate from the machined TGB to the Government after completion of work.

C. Administration of this contract shall be by the Contracting Officer’s Representative (COR) appointed by the Government.

1. Contractor communication and coordination of work shall be through the COR.

2. The COR may hold Government on-site inspections at points listed in Section 6.0, Specific Tasks.

a) Notify the COR within 5 working days before an inspection point is to occur.

3. The Contractor shall perform the work as defined under Section 6.0, Specific Tasks.

a) Additional work, as may be required and resulting from deficiencies identified by the post application testing, can only be performed upon written authorization by the Contracting Officer (CO) with a contract modification.

b) The only person that has the authority to modify the terms of the contract or request work for which compensation will be provided is a CO

i) If the Contractor receives a request from Government personnel directing or requesting work that the contractor believes is not within the terms of the PWS or the contract, then the Contractor must notify the CO of the request.

c) Contract modifications are subject to the terms contained within these contract documents unless otherwise stated.

4. Contractor shall provide a point of contact: name, title, telephone number and email address during normal working hours for the government to schedule work under this contract.

D. Period of Performance

1. The overall period of performance for the purchase order is 120 days after Contract Award and receipt of parts.

E. Place of Performance

1. The Government will deliver and pick-up the equipment to / from the Contractor’s location at:

Kingsbury Repair and Services Division, West 209 Burns Drive Yuba City CA 95991

2. All work will be performed at the Contractor’s facility.

F. Safety

1. Contractor shall perform the work in accordance with the applicable State and Federal OSHA standards.

5.0 Reference Standards

A. American Society of the International Association for Testing Materials (ASTM).

1. ASTM B23 - Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)

B. American Society of Mechanical Engineers (ASME).

1. ASME B46.1-2019 - Surface Texture Surface Roughness, Waviness and Lay

C. American Society for Nondestructive Testing (ASNT).

1. ASNT SNT-TC-1A-2021 - Qualification of Nondestructive Testing Personnel

6.0 Specific Tasks

A. Thrust Bearing Shoes

1. As-found evaluation.

a) Perform visual inspection and submit inspection report to the Government.

i) Report should include at minimum surface conditions, visual inspections, and recommendations for repair.

ii) Pause work on TBS until COR approves repair(s).

iii) If other work, not currently specified in the PWS, for the thrust shoes is found necessary from the inspection, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

2. If COR approves re-babbitting of TBS continue to section 6.0 A.3-6, else skip to section 6.0 A.7.

3. Remove old Babbitt material.

4. As-found inspection.

a) Perform visual inspection and non-destructive testing of base material for defects. Submit inspection report to the Government.

i) Report should include at minimum surface conditions, and visual inspections.

ii) If other work, not currently specified in the PWS, for the thrust shoes is found necessary from the inspection, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

5. Plug HPL oil port on the face of each shoe.

6. Installation of new Babbitt material.

a) ASTM B23 Grade 2 Babbitt material. Provide Babbitt material certificate of analysis.

b) Percentage of total Babbitt area un-bonded needs to be less than one percent using Ultrasonic Thickness (UT) measurements.

i) Inspection shall be completed by qualified person in nondestructive testing.

c) Porosity – Pinholes .015” and less will be acceptable if they are spaced 1/8” away from one another and no more than five in one square inch.

d) Any cracks, laps or other liner indications are not allowed.

7. Inspect and test HPL system.

a) Test HPL system and replace any hydraulic valves and fittings internal to each shoe if needed.

8. Final Inspection.

a) Notify the COR for on-site witnessing and self-spot checks of the measurements.

b) Submit report to the Government. Report should include at minimum the follow:

i) As-found evaluation including at minimum surface conditions, visual inspections, and recommendations for repair.

ii) For babbitt repair the report should include certificate of analysis including UT measurements.

iii) For any HPL modifications the report should summary of medications and drawing references.

9. Package and box for long term storage.

B. Turbine Guide Bearing

1. Incoming Inspection.

a) Unbox, clean, and perform incoming inspection and evaluation. Submit inspection report recommended repair to the Government.

i) Report should include at minimum dimensions, surface conditions, visual inspections, and recommended repair.

b) Measure as-found conditions.

i) Notify the COR for on-site witnessing and self-spot checks of the measurements.

ii) Four (4) evenly spaced inside micrometer inner diameter measurements (every 45 degrees).

iii) Radial runout measurements shall be taken at four (4) elevations of the bore.

iv) Axial runout measurement on the bolt flange machined surface.

v) Determine if as-found measurements of the Babbitt bore are acceptable deviations from cylindrical; nominal diameter plus tolerance of 0.0015-inches.

vi) Submit as-found measurements and recommendations for repair to the Government.

c) If other work, not currently specified in the PWS, for the TGB is found necessary from the inspection and measurements, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

2. Part setup and fixturing:

a) The TGB will be shipped with provided clamp rings pre-installed to the target height. The clamp rings mimic the tapered fit installation of the TGB.

i) All modifications must be made while clamp rings are in place.

ii) Verify heights of installed clamp rings from the machined bottom surface of the TGB flange.

b) Chuck jaws, axial hold down clamps, and jacks shall be used as necessary to hold rigid the dimensional relationships during machining. See Figure 3 for example of proper setup.

i) Notify the COR for on-site inspection and approval of the setup before proceeding with machining.

c) Consider thermal expansion of the bearing between the machined location and installed location for machining dimensional accuracy.

i) The ambient temperature of the shop at the vicinity of the bearing shall be submitted to the government in the final report.

ii) Ambient temperature of the installed location is 60 degrees Fahrenheit.

3. Flange clamping bolts and alignment pins, see Figure 4.

a) Through-drill the flange clamping (pinch) bolt holes for slip fit of similarly sized commercially off the shelf Grade 8 bolt and nut with washers.

b) Spot face for proper fit of commercially off the shelf washers on both sides of the flange surface.

c) Machine tapered alignment pins and holes located parallel and adjacent to the clamping bolts. Ream for final fit and install alignment pins prior to final Babbitt machining.

4. COR must approve re-babbitting of TGB, if approved continue to section 6.0 B.5-8, else skip to section 6.0 B.9.

5. Remove old Babbitt material.

6. As-found inspection.

a) Perform visual inspection and non-destructive testing of base material for defects. Submit inspection report to the Government.

i) Report should include at minimum surface conditions, and visual inspections.

ii) If other work, not currently specified in the PWS, for the TGB is found necessary from the inspection, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

7. Plug all ports on the babbitt face of the TGB.

8. Installation of new Babbitt material.

a) ASTM B23 Grade 2 Babbitt material. Provide Babbitt material certificate of analysis.

b) Percentage of total Babbitt area un-bonded needs to be less than one percent using Ultrasonic Thickness (UT) measurements.

i) Inspection shall be completed by qualified person in nondestructive testing.

c) Porosity – Pinholes .015” and less will be acceptable if they are spaced 1/8” away from one another and no more than five in one square inch.

d) Any cracks, laps or other liner indications are not allowed.

9. Machine TGB babbitt per drawing specifications.

a) Inside diameter (bore).

b) Oil grooves and chamfering.

c) The final machined babbitt axis shall be concentric to the TGB outside diameter tapers. The TGB bore shall be perpendicular to the machined bottom surface of the TGB flange.

d) The finished machining surface shall meet a 32 micro-inch rating (ANSI B46.1-2019).

10. Spot face the top bolt flange surface to 3" diameter over the four (4) each 1-1/4" jack bolt holes, see Figure 5.

a) The spot face shall be parallel to the bottom machined surface of the bearing flange.

b) The depth of spot face cutting shall be the minimum depth required to achieve 90% spot face parallelism with the bottom surface of the flange.

11. Drill for the six witness holes on the TGB flange for measuring with a depth gage to match the other three (3) modified TGBs at the Folsom Powerplant, see Figure 7.

12. Machine one threaded RTD port on one bearing shell using the provided RTD or specified thread for proper fit.

a) Final port location to be identified by the COR, see Figures 6 and 7.

i) The drilling will be located on the top surface, inside of the highest raised oil dam of the assembled TGB, adjacent to the Babbitt on the “downstream” cast steel bearing shell half, adjacent to the existing capillary tube temperature bulb. It will initially drill through the bearing shell but be angled from vertical such that it allows the RTD to touch Babbitt material without penetrating the Babbitt inside diameter.

13. Repair the 29/32-inch threaded holes for the two (2) 3/4-inch oil supply ports in the sides of the bearing housing. The thread pitch on the oil supply port in National Pipe Thread (NTP).

14. Final Inspection

a) After machining is complete, take another set of measurements in the same manner as required for the as-found measurements.

b) Notify the COR for on-site witnessing and self-spot checks of the measurements.

c) Submit report to the Government. Report should include at minimum the follow:

i) As-found evaluation including at minimum surface conditions, visual inspections, and recommendations for repair.

ii) For babbitt repair the report should include certificate of analysis including UT measurements.

iii) For any TGB modifications submit inspection report to the Government and refer to as the “machined measurements” and any drawing references.

15. Package and box for long term storage.

C. Upper Guide Bearings

1. As-found evaluation.

a) Perform visual inspection and submit inspection report to the Government.

i) Report should include at minimum surface conditions, visual inspections, and recommendations for repair.

ii) Pause work on UGB until COR approves repair(s).

iii) If other work, not currently specified in the PWS, for the thrust shoes is found necessary from the inspection, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

2. If COR approves re-babbitting of UGB continue to section 6.0 C.3-5, else skip to section 6.0 C.7.

3. Remove old babbitt material.

4. As-found inspection.

a) Perform visual inspection and non-destructive testing of base material for defects. Submit inspection report to the Government.

i) Report should include at minimum surface conditions, and visual inspections.

ii) If other work, not currently specified in the PWS, for the UGB is found necessary from the inspection, it will be handled through a bilateral modification to the contract. Pause work and contact the Government for the modification.

5. Installation of new Babbitt material.

a) ASTM B23 Grade 2 Babbitt material. Provide Babbitt material certificate of analysis.

b) Percentage of total Babbitt area un-bonded needs to be less than one percent using Ultrasonic Thickness (UT) measurements.

i) Inspection shall be completed by qualified person in nondestructive testing.

c) Porosity – Pinholes .015” and less will be acceptable if they are spaced 1/8” away from one another and no more than five in one square inch.

d) Any cracks, laps or other liner indications are not allowed.

6. If COR approves rear pivot insert replacement.

a) Perform as-found measurements.

b) Remove old insert(s).

c) Replace insert with new insert(s).

d) Perform final inspection by taking another set of measurements.

7. Final Inspection.

a) Notify the COR for on-site witnessing and self-spot checks of the measurements.

b) Submit report to the Government. Report should include at minimum the follow:

i) As-found evaluation including at minimum surface conditions, visual inspections, and recommendations for repair.

ii) For any babbitt repair the report should include certificate of analysis including UT measurements.

iii) For any insert replacement the report should include as-found and final inspection measurements along with any certificate of new insert(s).

8. Package and box for long term storage.

7.0 Documentation

A. The Contractor shall provide the following documentation to the Government.

1. Thrust bearing shoes as-found inspection report and recommended repair.

2. All certificate of analysis for babbitt material (if performed).

3. Thrust bearing shoes final inspection report.

4. TGB initial inspection report, as-found measurements, and recommended repair.

5. TGB final inspection report.

6. Dimension mapping information for TGB measurements.

a) All radial and axial runout measurements shall be indexed by 8 evenly spaced locations around the part’s axis of rotation.

b) The number Bore runout measurements elevations shall be sufficient to determine the axial direction of the bore.

7. UGB initial inspection report, as-found measurements, and recommended repair.

8. UGB final inspection report.

9. As-built drawings.

a) The Contractor shall provide the Government with as-built drawings for the modifications of the TGB for all critical dimensions.

i) Drawings shall be in .DWG format compatible with AutoCAD, version 2018

10. Warranty

a) All materials and work shall be warranted by the Contractor for a period of one year after received by the Government.

B. Government supplied information.

1. The Government will provide electronic versions (PDF file format) of available reference drawing related to the thrust bearing shoes and turbine guide bearing.

2. The Contractor shall verify all dimensions provided in the drawings to assure accuracy of final machining.

3. See Section 10.0 - Attachment/Technical Exhibit List for list of Government provided drawings.

8.0 Quality Assurance and Surveillance Plan

A. The period of performance begins when the Contractor receives the Contract Award and the Government-Furnished equipment.

1. The Contractor has 120 days to complete the inspection, re-babbitting, and machining of the thrust shoes, turbine guide bearing, and upper guide bearings.

a) The Contractor will coordinate with the Government to schedule shop visits at mutually agreed upon time windows.

B. The Quality Assurance Surveillance Plan (QASP) is intended to establish guideline that shall be used to evaluate what level of success/completion the Contractor has achieved in executing the work as defined in the PWS. The absence of a QASP for any contract requirement, however, shall not detract from its enforceability or limit the rights or remedies of the Government under any other provision of the contract in determining the quality of the Contractor performance.

9.0 Performance Requirements Summary (PRS)

Performance Requirement Acceptable Quality Level Method of Surveillance

1. Government required documentation

2. Acceptance testing

3. Performance of minor maintenance and adjustments

4. As otherwise stated in the PWS

Each activity/task shall be evaluated for:

1.Responsiveness a.) To required documentation.

b.) To technical requirements.

No more than two (2) issues with responsiveness for documentation and technical requirements.

2.Timeliness -

Contractor executes each task or activity within the agreed upon timeframe.

All tasks and activities shall be 100% complete within the agreed upon timeframe. The Contractor may work with the COR if the timeframe becomes an issue.

3.Quality of Work -

Contractor performed each task or activity with a clear understanding of the requirements. Workmanship was free of defects.

No more than two (2) defects that the Government finds outside of the Contractor QC process.

4.Completeness -

Contractor executes each activity in the PWS to completion.

All PWS activities shall be 100% complete.

COR to provide surveillance, track Contractor progress and performance, discuss findings and follow-up as necessary.

10.0 Attachment/Technical Exhibit List

A. Quality Assurance Surveillance Plan (QASP)

B. Government Provided Drawings.

Sheet No.

Drawing No. Drawing Title

1 491210 64.0 Thrust Pad Fitted for HPL 1 485M-208-208423 Bearing Housing and Shell – Hydraulic Turbine 1 485M-208-2751 Upper Guide Bearing Assembly & Details

C. Photos Folsom Powerplant Thrust Bearing Shoes and Turbine Guide Bearing Repair

Figure 1. Thrust bearing shoes as assembled on the Folsom Units

Figure 2. Unit 2 TGB, arrow showing notch on oil dam that signifies upstream.

Figure 3. Example of four-point chuck fixture setup for machining the TGB.

Figure 4. Final placement of clamping bolt and tapered alignment pin on the other three TGB at Folsom Powerplant.

Figure 5. Arrows showing two of the four jacking bolt holes that require spot facing.

Figure 6. Arrow showing existing capillary tube temperature bulb port.

Figure 7. New threaded RTD port shown (smaller drill bit) adjacent to existing capillary tube temperature bulb port. Witness holes shown on same surface.

Figure 8. View of final machined TGB.

Table of Deliverables

Section 6.0 of PWS:

Site Safety

Compliance with all OSHA, RSHS and any special requirements as outlined in the PWS.

Sections 3.0 - 3.2 Development and Approval/Acceptance of Submittals

Sections 3.3 Scheduling and Prosecution of all onsite work to inspect and certify elevators

11.0 Quality Assurance Surveillance Plan

The Quality Assurance Surveillance Plan is one evaluation method the government uses to surveillance performance to determine whether the Contractor meets the standards of performance as defined in the PWS. The absence of a QASP for any contract requirement, however, shall not detract from its enforceability or limit the rights or remedies of the government under any other provision of the contract in determining the quality of the Contractor performance.

PERFORMANCE REQUIREMENTS SUMMARY (PRS)

Performance Standard/ Acceptable Quality Level (Note:

Timeliness is Required for All Tasks Within their Required

Timeframes 100% of the Time)

Method of Surveillance COR -

CCAO

Zero on-site safety incidents or violations in accordance with the OSHA, RSHS, and HECP.

COR Surveillance (100%)

Provide submittals within 14 calendar days following contract award.

Reclamation approval/acceptance of submittals within 28 days following contract award.

COR Review, Coordination of Comments, Surveillance and Approval/Acceptance (100%)

Inspections completed as agreed upon schedule and provide/post certificates in elevators.

Reports shall be provided to the COR no later than seven business days following an inspection.

COR Surveillance (100%)

End of PWS

COMMERCIAL CLAUSES

52.252-2 Clauses Incorporated by Reference February 1998

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

http://www.acquisition.gov/far/

52.212-5 Contract Terms and Conditions Required to Implement

Statutes or Executive Orders -- Commercial Items Dec 2023

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub.

L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (DEC 2023) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (MAR 2023) ( 31 U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

Clauses Title Date 52.204-13 System for Award Management Maintenance Oct 2018 52.204-18 Commercial and Government Entity Code Maintenance Aug 2020 52.212-4 Contract Terms and Conditions—Commercial Items Nov 2023 52.232-40 Providing Accelerated Payments to Small Business

Subcontractors Dec 2013

52.247-34 FOB Destination Nov 1991 http://www.acquisition.gov/far/ https://www.acquisition.gov/content/52203-19-prohibition-requiring-certain-internal-confidentiality-agreements-or-statements#i52_203-19 https://www.acquisition.gov/content/52204-23-prohibition-contracting-hardware-software-and-services-developed-or-provided-kaspersky-lab-and-other-covered-entities#id189A70O0P1N https://www.acquisition.gov/content/52204-25-prohibition-contracting-certain-telecommunications-and-video-surveillance-services-or-equipment#id1989I600I4C https://www.acquisition.gov/content/52209-10-prohibition-contracting-inverted-domestic-corporations#i1062680 https://www.acquisition.gov/far/part-52#FAR_52_232_40 https://www.govinfo.gov/link/uscode/31/3903 https://www.govinfo.gov/link/uscode/10/3801 https://www.govinfo.gov/link/uscode/10/3801 https://www.acquisition.gov/content/52233-3-protest-after-award#i1048661 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/content/52233-4-applicable-law-breach-contract-claim#i1048698 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3

_X_ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) ( 41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) ( 41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.)

_X_ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

__ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111- 117, section 743 of Div. C).

_X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L.

117-328).

__ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub. L. 115–390, title II).

__ (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec 2023) ( Pub. L. 115– 390, title II).

__ (ii) Alternate I (Dec 2023) of 52.204–30.

__ (12) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) ( 31 U.S.C. 6101 note).

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) ( 41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) ( 15 U.S.C. 657a).

__ (17) [Reserved]

__ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) ( 15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (20) 52.219-8, Utilization of Small Business Concerns (Sep 2023) ( 15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) ( 15 U.S.C. 637(d)(4)).

https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/4655 https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://www.govinfo.gov/link/uscode/41/4712 https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_29 https://www.govinfo.gov/link/plaw/115/public/390 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Sep 2023) of 52.219-9.

__ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) ( 15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

_X_ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) ( 15 U.S.C. 637s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep 2021) ( 15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct 2022) ( 15 U.S.C. 657f).

__ (26) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2023)( 15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) ( 15 U.S.C. 637(m)).

_X_ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) ( 15 U.S.C. 637(m)).

_X_ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) ( 15 U.S.C. 644(r)).

_X_ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15U.S.C. 637(a)(17)).

_X_ (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_ (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Nov 2023) .

_X_ (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

_X_ (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

__ (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 ( 22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (May 2022) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec644.htm https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://www.govinfo.gov/content/pkg/USCODE-2018-title15/html/USCODE-2018-title15-chap14A-sec637.htm https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.acquisition.gov/far/22.1803#FAR_22_1803

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrofluorocarbons (Jun 2016) (E.O. 13693).

__ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (Jun 2016) (E.O. 13693).

__ (44) (i) 52.223-13, Acquisition of EPEAT®-Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Oct 2015) of 52.223-13.

_X_ (45) (i) 52.223-14, Acquisition of EPEAT®-Registered Televisions (Jun 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun2014) of 52.223-14.

__ (46) 52.223-15, Energy Efficiency in Energy-Consuming Products (May 2020) ( 42 U.S.C. 8259b).

__ (47) (i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate I (Jun 2014) of 52.223-16.

__ (48) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Jun 2020) (E.O. 13513).

_X_ (49) 52.223-20, Aerosols (Jun 2016) (E.O. 13693).

__ (50) 52.223-21, Foams (Jun2016) (E.O. 13693).

__ (51) (i) 52.224-3 Privacy Training (Jan 2017) (5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

_X_ (52) (i) 52.225-1, Buy American-Supplies (Oct 2022) ( 41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

__ (53) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103- 182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Dec 2022) of 52.225-3.

__ (iv) Alternate III (NOV 2023) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (54) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

__ (55) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (56) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. Subtitle A, Part V, Subpart G Note).

https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://www.acquisition.gov/far/52.223-12#FAR_52_223_12 https://www.acquisition.gov/far/52.223-13#FAR_52_223_13 https://www.acquisition.gov/far/52.223-13#FAR_52_223_13 https://www.acquisition.gov/far/52.223-14#FAR_52_223_14 https://www.acquisition.gov/far/52.223-14#FAR_52_223_14 https://www.acquisition.gov/far/52.223-15#FAR_52_223_15 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.223-16#FAR_52_223_16 https://www.acquisition.gov/far/52.223-16#FAR_52_223_16 https://www.acquisition.gov/far/52.223-18#FAR_52_223_18 https://www.acquisition.gov/far/52.223-20#FAR_52_223_20 https://www.acquisition.gov/far/52.223-21#FAR_52_223_21 https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.govinfo.gov/link/uscode/19/3301 https://www.govinfo.gov/link/uscode/19/2112 https://www.govinfo.gov/link/uscode/19/2112 https://www.govinfo.gov/link/uscode/19/3805 https://www.govinfo.gov/link/uscode/19/4001 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-3#FAR_52_225_3 https://www.acquisition.gov/far/52.225-5#FAR_52_225_5 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section2501&num=0&edition=prelim http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title19-section3301&num=0&edition=prelim https://www.acquisition.gov/far/52.225-13#FAR_52_225_13 https://www.acquisition.gov/far/52.225-26#FAR_52_225_26

__ (57) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) ( 42 U.S.C. 5150).

__ (58) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov2007) ( 42 U.S.C. 5150).

_X_ (59) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

__ (60) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (Nov 2021) ( 41 U.S.C. 4505, 10 U.S.C. 3805).

__ (61) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov 2021) ( 41 U.S.C. 4505, 10 U.S.C. 3805).

__ (62) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct2018) ( 31 U.S.C. 3332).

__ (63) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (Jul 2013) ( 31 U.S.C. 3332).

__ (64) 52.232-36, Payment by Third Party (May 2014) ( 31 U.S.C. 3332).

__ (65) 52.239-1, Privacy or Security Safeguards (Aug 1996) ( 5 U.S.C. 552a).

__ (66) 52.242-5, Payments to Small Business Subcontractors (Jan 2017) ( 15 U.S.C. 637(d)(13)).

__ (67) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Nov 2021) ( 46 U.S.C.

55305 and 10 U.S.C. 2631).

__ (ii) Alternate I (Apr 2003) of 52.247-64.

__ (iii) Alternate II (Nov 2021) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

_X_ (1) 52.222-41, Service Contract Labor Standards (Aug 2018) ( 41 U.S.C. chapter67).

_X_ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (Multiple Year and Option Contracts) (Aug 2018) ( 29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ (4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards-Price Adjustment (May 2014) ( 29U.S.C.206 and 41 U.S.C. chapter 67).

__ (5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment-Requirements (May 2014) ( 41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services- Requirements (May 2014) ( 41 U.S.C. chapter 67).

_X_ (7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (Jan 2022).

_X_ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (Jan 2022) (E.O. 13706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (Jun 2020) ( 42 U.S.C. 1792).

https://www.acquisition.gov/far/52.226-4#FAR_52_226_4 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.226-5#FAR_52_226_5 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.acquisition.gov/far/52.229-12#FAR_52_229_12 https://www.acquisition.gov/far/52.232-29#FAR_52_232_29 http://uscode.house.gov/browse.xhtml;jsessionid=114A3287C7B3359E597506A31FC855B3 https://www.govinfo.gov/link/uscode/10/3805…