Sol_140L5724Q0023.pdf

140L5724Q0023 BLM-UT Iron County Weed Control

Request for Quotation Iron County Weed Control

Type of Contract: Services, Firm Fixed Priced (FFP), Purchase Order County: Iron County, UT

Bureau Of Land Management

Iron County COR Contract Specialist Contracting Officer

Name: Jessica Bulloch Mark Renforth Daniel Walker Email: jbulloch@blm.gov mrenforth@blm.gov dlwalker@blm.gov

Site Visit: A pre-bid site visit is NOT scheduled for this project.

Evaluation and Award Basis: IAW FAR 52.212-4 listed in solicitation.

Questions Due Date: Due April 02, 2024, 1:00 pm MDT. Questions relating to this solicitation shall be submitted in writing, with the subject line “140L5724Q0023 Iron County Weed Control” to the CS/CO in email.

Quote Submittal Information: Due April 08, 2024, 3:00 pm MDT by email to CS/CO.

Period of Performance: May 1, 2024 – August 15, 2024

140L5724Q0023 BLM-UT Iron County Weed Control

Attachments

RFQ SF18 ____________________________________________ pg. 3

Quote Response Form____________________________________ pg. 5

Statement of Work ______________________________________ pg. 6

Iron County Map _______________________________________ pg. 18 Wage Determination ____________________________________ pg. 19

Clauses & Provisions ___________________________________ pg. 30

140L5724Q0023

1. REQUEST NO.

5a. ISSUED BY

NAME

a. NAME

c. STREET ADDRESS

d. CITY

10. PLEASE FURNISH QUOTATIONS TO

THE ISSUING OFFICE IN BLOCK 5a ON

OR BEFORE CLOSE OF BUSINESS (Date)

2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NO. 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG.1

RATING

6. DELIVERY BY (Date)

7. DELIVERY

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

PAGE OF PAGES

5b. FOR INFORMATION CALL: (No collect calls)

TELEPHONE NUMBER

AREA CODE NUMBER

8. TO:

b. COMPANY

e. STATE f. ZIP CODE

c. CITY

d. STATE e. ZIP CODE

IMPORTANT: This is a request for information, and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or services. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotations must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

THIS RFQ

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

IS IS NOT A SMALL BUSINESS SET ASIDEX

03/22/2024 0040651071

1 71

440 WEST 200 SOUTH, SUITE 500

SALT LAKE CITY UT 84101

BLM UT-STATE OFC ADM SVCS BR(UT952)

Multiple

334 846-2890Mark Renforth

04/08/2024 1500 MD

FOB DESTINATION

OTHER

(See Schedule)X

ITEM NO.

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

IRA - Iron County Weed Control

1. Quoters shall submit a signed and dated SF-18 with submitted quotes.

2. This requirement is a Total Small Business Set-Aside.

3. Solicitation will result in a Firm Fixed Price award.

4. Quotes must be received no later than 1500 MDT on 08 April 2024 to be evaluated.

5. Only emailed quotations will be accepted. All quotes must be emailed to the Contract Continued ...

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations

13. NAME AND ADDRESS OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

a. NAME OF QUOTER

AREA CODE

NUMBER

15. DATE OF QUOTATION

b. TELEPHONE are are not attached

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

STANDARD FORM 18 (REV. 6-95)

Prescribed by GSA - FAR (48 CFR) 53.215-1(a)

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

2 71

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140L5724Q0023

Specialist, Mark Renforth at mrenforth@blm.gov

6. Quoters must have valid SAM registration by the closing time/date of this solicitation to be considered for award.

7. All vendors must currently possess a Utah

State Weed Certification and have experience treating, inventorying, and collecting data to be considered for award.

The following factors shall be used to evaluate offers:

IAW 52.212-2 Evaluation-Commercial Products and

Commercial Services (Nov 2021) listed in this solicitation.

2) Price

EVALUATION AND AWARD BASIS

Award will be made to the contractor whose quotation conforms to the specifications and is considered to represent the Lowest Price

Technically Acceptable quote to the government.

Period of Performance: 05/01/2024 to 08/15/2024

00010 Iron County Weed Control

Motorized inventory and treatment

Motorized inventory only

Non-motorized inventory and treatment

Non-motorized inventory only

Any increase in acreage that may be needed will be priced at corresponding quoted per acre cost of CLIN 0010.

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

RFQ 140L5724Q0023 – Weed Control in Iron County

Quote Response Form RFQ No. 140L5724Q0023 – Iron County Weed Treatment

Vendor Name: ____________________

CAGE: ___________________________

UEI: _____________________________

Price Quote

Item Description of Work Price per Acre ($)

1 Motorized inventory and treatment 2 Motorized inventory only 3 Non-motorized inventory and treatment 4 Non-motorized inventory only

IRON COUNTY WEED CONTROL 2024

STATEMENT OF WORK

A. INTRODUCTION

This contract involves three parts: inventory, treatment, and mapping of noxious weeds.

Inventory would be considered extensive inventory. In other words, a search (“windshield survey”) for listed noxious weeds from routes used to travel from one known treatment area to the next or areas you go to with no weeds, verifying on GIS that it’s not marked blue a noxious weed area treated by other contractors or in house. The treatment and inventory would be for specific target species and for any of the 55 weeds designated as “noxious” in Utah by the Utah Secretary of Agriculture as well as any additional noxious weeds as designated by the Iron County Commission (bull thistle, puncturevine, western whorled milkweed). The Bureau of Land Management (BLM), Cedar City Field Office, requires treatment and mapping of noxious weed infestations, as described in this statement of work, for a total treatment or inventory of approximately 190 acres. However, treated and/or inventoried acreage total will be determined by the availability of funds and is subject to increase or decrease to match the available funding.

Payment will be based on acres treated, inventoried, and recorded. The areas below are identified as the most likely areas with weed infestations and should be addressed in order, with consideration of the phenological progression and density and input from the COR. Additionally, the contractor may treat newly discovered, unmapped areas on BLM lands within the general project area (Iron County and small portion Beaver County). Treatments with chemical will only be applied on those days when weather permits, and Actual acres treated and inventoried will be based on funding availability, this will be communicated to Contractor prior to start of Contract.

Noxious weeds within the contracted area will be marked Red on GIS data.

Map: Iron County Weed Control area totaling 1357 acres.

Density/treatment is not expected to exceed 14% of the mapped acres above. Work under this contract includes mapping as described below and treatment or inventory of up to 190 acres.

BLM reserves the ability to increase acres at the quoted price per acre for treatment and inventory at any point during the contract Period of Performance if there is remaining acreage that requires treatment or inventory within the mapped area. Any increase is based on both funding and Contractor availability. BLM reserves the right to decrease acreage to match available funding. COR has the delegated authority to determine what amounts of acreage of treatment or inventory non-motorized or motorized is allowed.

This contract involves noxious weed control of primarily Scotch thistle, bull thistle, hound’s tongue, white top, dalmatian toadflax and black henbane on public lands administered by the BLM. These species may occur alone or in combination with lesser amounts of knapweeds, musk thistle, and other noxious species which occur in small, localized populations. Inventory and treatments occur on any of the 55 weeds designated as “noxious” in Utah by the Utah Secretary of Agriculture as well as any additional noxious weeds as designated by the Iron County Commission (bull thistle, puncturevine, western whorled milkweed).

Scotch thistle is the most abundant species which will be encountered while performing the treatment in Iron County. The goal is a high percentage kill so that, in combination with other ongoing weed control efforts, these species will eventually be eradicated from BLM-administered lands within the area of the Cedar City Field Office. Actual acres treated and inventoried will be recorded into the collector program and will be monitored by the COR or PI.

Before awarding the contract, contractor with submit the per-acre-cost for treatment and inventory and BLM will then determine the number of acres contracted based on available funding. This contract involves GPS mapping using the BLM National Invasive Species Information Management System (NISIMS). GPS mapping will occur on 1) any new populations of target species that are discovered during treatment, 2) mapping treatments or inventory of known populations which are already in the database (where weeds no longer occur on sites, these will be mapped and a notation made in the database that they are weed free), 3) changes in weed population sizes (refer to the attached maps which shows known locations of noxious weeds and GIS point or polygons will notate species), and 4) low-density areas you don’t go, based on familiarity of treating last year (BLM personnel will attempt to treat these areas).

The focus area of this project is specific, mapped polygons within Iron County. The outer perimeter of the work area and close up area of location is defined on the attached maps.

B. DESCRIPTION OF WORK:

Weed Inventory and Treatment:

Most of Iron County will be extensively inventoried from oiled or dirt roads during fulfillment of this contract, as described in the introduction. No intensive inventory (gridding) is required in 2024.

Weed control work involves the application of specific herbicides in solution and/or hand cutting or pulling. All weed locations range in size from scattered single plants to concentrations of plants on areas several acres in size. Whitetop and knapweed tends to be more concentrated. All areas on the maps to be provided are to be treated as needed. Control treatments may be completed from the seedling and rosette stage to the very early bloom stage for all species.

Scotch Thistle plants will be in all stages of growth, including seedlings, rosettes, and maturing plants with flower stalks. A Pesticide Application Report (PAR) will be completed daily by each spray crew. The PAR is a paper or electronic record of herbicide application which is required to be completed at the time of treatment and will be turned it at the end of the contract. It includes herbicides or combinations of herbicides used, rates of application, how much was used, target species, dates and times of application, names of applicators, etc.

The exact acreage of infested areas which needs to be treated is uncertain because noxious weed populations are typically affected by previous years’ treatments, insects, precipitation, wind, flooding, and distribution by animals, fires, etc. Acreage that can be treated or inventoried will be based on price per acreage and will be provided to contractor prior to starting the Contract, typically acreage is no more than 14% of the overall density Though mapped polygons are estimated to be 1357 acres, it is estimated that enough chemical would be needed to treat or inventory weeds on only approximately 190 of those acres and is dependent upon funding availability. Contractor will work with the COR to determine best area to start and then work in phenological progression and density, determined by the COR. The Government will pay the contractor based on actual acres treated and inventoried. Actual acres treated and inventoried as evidenced by the NISMS data provided by the contractor and the PAR records, with option to add acres at the quoted price per acre for treatment and inventory at any point prior to contract completion (if within treatment window) based on funding availability and if it fits with in the Contractors work time frame. Random inspections will be conducted by the project COR and PI to verify accuracy of the contractor information provided.

Maps of environmentally sensitive areas will be provided at the pre-work meeting if any.

Control work within these areas will be subject to Standard Operating Procedures, Mitigation Measures and Conservation Measures (attached Appendix A, B and C). GIS data files, shape files, etc. of environmentally sensitive areas will be provided on an as needed basis.

The contractor will plan their work and keep the BLM informed of progress by synchronizing their NISIMS data within two days after they begin work. After the initial synchronizing of data, it will be required that data be synced as frequent as possible to assure there are no problems with treatments or data collection. While planning work, the highest priority for treatment should be given based on the phenological progression of the target species so that they are treated before they go to seed (see also section G. of this contract).

Final payment will be based on the BLM’s acceptance of both useable and accurate GPS data and actual treatment and inventory of weeds according to the requirements above.

Weed Mapping and GPS Requirements:

At the pre-work meeting there will be coordination during which the BLM will provide the contractor with necessary information and training as needed on the NISIMS field data collection process. Field data collection will require mobile Android devices using the ESRI Collector app or Field map app which can be attained from the Google Play Store. The Contractor will be required to get ArcGIS mobile account and Fill out Rules and Behavior and get a login to the Geoplatform. The contractor is required to provide an adequate number of mobile Android devices, capable of utilizing the NISIMS, to adequately fulfill the data needs of this contract. The BLM GIS specialist will attend the pre-work meeting. Meeting maybe held virtually or in person at the Cedar City Field Office.

NISIMS – The National Invasive Species Information Management System (NISIMS) is designed to collect field-based infestation and treatment data for invasive species found on public lands, then store it in a standard database to facilitate data sharing and reporting at local, state, and national levels. The NISIMS database consists of a series of feature datasets that have been published as a feature service in AGOL. The Contractor will be part of a group in AGOL which will allow the synchronization of data collected in the field.

The Contractor is required to accurately complete all mandatory fields in the GPS NISIMS.

C. LOCATION

Work under this contract is located on BLM lands in Iron County. The work locations and weed species are shown on the attached map.

D. ACCESS TO THE WORK

Paved and dirt roads, vehicle trails and off road UTV/ATV and/or horseback or foot travel.

Cross country travel is generally allowed (except in environmentally sensitive areas as mapped if any) with care not to create ruts in inclement weather and saturated soil conditions. Some of the known weed populations are relatively close to dirt roads, range improvement projects, etc. and are relatively accessible. Some areas being more difficult to access and may require more hiking and backpacking or horseback especially in drainages and steeper terrain. Some populations are scattered across old burn areas and are best worked with ATV/UTV equipped with a sprayer with some backpacking and/or horseback sprayer. The contractor will only traverse an area once to avoid the creation of new ATV/UTV trails across landscapes. Other infestations (portions of the livestock trail) are in steep terrain where motorized vehicles are unsafe to operate or where they are not allowed. Treatment of these areas will require hiking and backpacking and/or horseback where off-road travel and/or chemical spraying is not allowed, it is marked on maps of environmentally sensitive areas if any and areas occupied by Utah prairie dogs, a threatened species.

E. CERTIFICATION

Contractor will furnish BLM with a copy of the certification that the Contractor and any employees who will apply chemicals are certified herbicide applicators. This certification must be supplied to BLM prior to starting work on the contract.

F. WORK TIMING AND GEOGRAPHICAL LIMITS

Work would begin when the contract is accepted by the Contractor and Notice to Proceed is given by BLM, could be as early as May 1st through May 15th to later into May depending on weed progression. Work would end when the job is complete or when weeds are so advanced in their maturation that “control” is ineffective, as decided by the Contracting Officer. Depending on the developmental state of the weeds, work could end as early as June 30th and as late as July 30, depending on whether or not flowers on plants have matured and produced seed. Weeds must be killed prior to producing seed for the year. All deliverables, including weed treatment work and GIS NISIMS data must be made available to BLM by August 15. The outer perimeter of the work area is defined on the attached maps. On site inspection prior to bidding on the contract is highly recommended. This is due to the high variability, from year to year, in density of the target species and other site conditions.

G. SPECIAL REQUIREMENTS AND PENALTIES

Progress will be monitored by BLM’s designated Project Inspector(s) (PI) and the COR. The intent is for all plants to be killed prior to flowering and absolutely prior to seed production. No less than 95 percent of all plants of the target species listed above on all sites within the identified perimeters must be killed by treatment with either herbicide or by hand cutting. A site is defined as anywhere at least one plant occurs. In the event more than 5 percent of a weed patch has gone untreated, the contractor must return to the site and complete treatment of the weeds within 3 days of being informed (if the percentage of live weeds remaining is 5 percent or less, the PI could elect to complete the control). If untreated acreage remains at the end of the contract, payment for the contract will be adjusted down by percentage of total acres which have not been treated when work is stopped. This percentage will be based upon GPS mapping and as determined by the BLM Contracting Officer (CO) or the COR.

For Scotch thistle, plants controlled using herbicide must be treated before the flower starts opening. Plants with open flowers must be hand cut. “Open” flowers are defined as those showing any reddish or purplish color. Plants on which the majority of flowers have gone to seed are deemed non-treatable (non-payable) and will not be cut under this contract.

Approved herbicides will be applied in accordance with current pesticide use proposals (PUPs) and EPA labels and in compliance with all guidelines and restrictions. Contractor will complete a daily Pesticide Application Report (PAR) as required for BLM accounting and reporting to be submitted weekly with GPS NISIMS data. The schedule of data submission may be altered by the Project Inspector, or the COR. Pesticide Application Records (PARs) must be completed at time of treatment and paper copy submitted at final payment.

H. CONTRACTOR-FURNISHED ITEMS

All personnel, materials, and equipment required to complete the project. This includes herbicide, herbicide application equipment, vehicles, fuel, dye, water, and any other associated tools and equipment. Contractor shall furnish adequate numbers of mobile Android devices to support the NISIMS. It is recommended that the contractor furnish a minimum of one crew (at least 1 person) and vehicles equipped with pressurized spray equipment with hose attachments mounted on the vehicles and/or ATV/UTV’s. ATVs/UTVs are recommended to assist in covering the areas. Backpack pumps or hand tools are also recommended to cover areas which are difficult to reach with trucks or ATVs/UTVs. It is also recommended that crews are equipped with cell phones for good communication with the PI and COR and for safety reasons.

It is recommended that the contractor have in place a safety plan, considering the remote locations of the work.

I. METHOD OF TREATMENT

The weeds can generally be treated by use of either herbicide or hand cutting or a combination of both if weed is treatable with either method. Required buffers for herbicide treatments in

Wetland and Riparian areas are 25 feet when spraying from vehicle, 10 feet hand application and at water’s edge if selective spot spraying with a backpack. Treatment in water may only occur with an herbicide labeled for aquatic use or handcutting/pulling. Thistles with open flowers will be hand cut. This does not include plants on which the flowers are drying up. These plants are not treatable under this contract.

J. HERBICIDE METHOD

All standard Operating Procedures, Mitigation Measures and Conservation Measures (Appendices A through C) apply to the application of herbicides under this contract.

If treatment by herbicide is used, the following will apply:

1. All applications will be in accordance with the label, currently approved Pesticide Use Proposal UTC010-23-001-EP, UTC010-23-002-EP and applicable environmental assessment (NEPA # DOI-BLM-WO-WO21000-2012-0002-EIS and DOI-BLM-UT-C010-2009-0036-EA).

Additional PUP’s may be approved, added and presented during pre work meeting.

2. Herbicides and Application Rates: only the following herbicides are allowed for use:

Chlorsulfuron (Telar XP), 2,4-D (Hardball),2,4-D (Alligare 2,4-D Amine). Dicamba and 2,4-D ( Brush-Rhap), Imazapyr (Polaris), clopyralid (Transline), Glyphosate(Rodeo), imazapic (Plateau), Triclopyr (Alligare Triclopyr 3), Triclopyr (Garlon 3a), Triclopyr (Tahoe 3a), Metsulfuron Methyl (Escort XP),Metsulfuron Methyl (patriot), Metsulfuron Methyl (Alligare MSM 60), picloram (tordon 22k), picloram (outpost 22k), picloram (alligare picloram 22k), 2,4-D (freelexx), aminopyralid and metsulfuron methyl (opensight), aminopyralid (milestone), aminopyralid and 2,4-D (Forefront HL), 2,4-D (2,4-D LV 6), 2,4-D (Alligare 2,4-D LV6), Dicamba (Diablo), dicamba and 2,4-D (latigo), Triclopyr (Garlon 3a), Triclopyr (Alligare Triclopyr 4), Imazapyr and diuron (Alligare Mojave 70 EG), 2,4-D (Weedar 64), following intended and maximum use rates will be utilized, see attached PUP’s. Prior to the contract start date additional herbicides, if covered under NEPA, may be added to the list of approved herbicides, and would be available for use after a PUP is approved for those herbicides with the Utah State Office. Any additional herbicides need to be provided as soon as possible to implement proper paperwork and receive approval prior to use.

See Attached PUP’s UTC010-23-001-EP, UTC010-23-002-EP, for proper Application Rates.

3. Adjuvants: The following nonionic surfactants may be used with chemicals requiring adjuvants and in conjunction with label directions: Spreader 90 (Loveland products,inc), NIS-EA (Wilbur-ellis.,llc) spec 90/10(Helena agri-enterprises, llc), methylated spray oil conc (Helena agri-enterprises, llc), MSO (Alligare,LLC), MSO Concentrate (alligare,LLC), Herbimax (Loveland products, Inc) Grounded W (Helena Agri-Enterprises, LLC), Induce (Helena Agri- Enterprises, LLC), Rainier-EA (Wilbur-Ellis Co.,LLC, Chemsurf 90 (Chemorse llc) Alligare 90 (Alligare LLC), Alligare defoamer (Alligare LLC), Unfoamer (Loveland product inc) and any others approved in PUP.

4. Dye: The following vegetation dye will be included in the fluid mixture at all times and will be mixed according to label instructions: Hi-light (Becker-Underwood), Turftrax (Loveland products, Inc), Hask mark blue liquid (Exacto, Inc), Alligare super marking dye (Alligare LLC), Hi-Light (BASF). The dye will be a highly contrasting color to the vegetation it is applied on. It will be applied in sufficient amounts so, as to be highly visible for at least 3 days following application unless it is removed by precipitation.

5. Product substitutions: No substitutions or replacements of herbicides, adjuvants, or dyes are allowed without prior written BLM approval and submission/approval of a Pesticide Use Proposal.

6. Equipment/Spray Nozzles: Spray rigs shall be equipped with nozzles capable of uniform distribution at the specified rate. Mixing Equipment: Contractor shall furnish the agitator and mixing tank for mixing treatment material. The treatment material shall be mixed according to the label and in a safe and knowledgeable manner. It can be mixed on site as needed. Water sources will be arranged for by the Contractor. Water taken from BLM sources will be pre-negotiated with the COR for safety and hazardous materials considerations. Ground Crew:

Shall be furnished by the Contractor.

7. Environmental Conditions: Application of treatment chemicals shall not be done when the wind velocity exceeds 6 miles per hour for 1 hour or more. Herbicide will not be applied when inclement weather conditions (rain, hail, sleet and snow) are forecast within 12 hours following a planned treatment. Also, herbicide shall not be applied for at least 12 hours after receiving moisture from a storm. Herbicides shall not be applied when ground is frozen. Spraying operations will be permitted only during daylight hours.

8. Transportation of Herbicide: The Contractor shall load and transport herbicide from the Contractor's home base to the work site and between sites according to all applicable laws and regulations. Upon completion of the work or termination of the contract, all unused herbicides shall be returned by the Contractor to the Contractor's home base. Disposal of all used containers and other materials shall be done according to the label and local laws and regulations.

K. HAND CUTTING METHOD

If hand cutting is used for Scotch thistle, Bull Thistle, Houndstongue, and Black henbane, it can be done under all weather conditions. Scotch Thistle plants can be cut at the ground surface, but all vegetative plant material (all basal leaves) must be severed from the root. It is not necessary to dig up the root. Properly cutting Bull thistle by digging the root at least two inches below ground level and remove all soil from the roots. All thistles flowering stems should be collected and destroyed to keep them from forming viable seed. Pick heads that are beyond the bud stage and place in a tight container. Bury the container at a landfill or other site that will not be unearthed. Black Henbane can be toxic so make sure wear gloves and use chemical or hand cut, do not hand pull. Houndstongue can be effective by hand cutting as well.

All hand cutting must be completed by disturbing the least amount of soil. If small plants and seedlings are uprooted while cutting, the plants will be separated from all soil material.

Suggested hand tools for cutting plants are shovels, pulaskis, and hoes. Contractor shall notate in the NISIMS system, whether treatment was by chemical or by handcutting.

L. GOVERNMENT -FURNISHED PROPERTY:

C size scale Map, and GPS NISIMS system instructions for contractor to get on their device.

M. INSPECTION

The COR or PIs will make inspections as a basis for monitoring progress in relation to completion payments and to make recommendations for adjustments in work. The PI and COR will communicate regularly with the Contractor or their designated representative and with on the groundwork crews. Contractor will be required to sync NISIMS field data to COR/PI upon request during the performance period of the contract and provide PAR up to that point.

N. ACCEPTANCE

Work performed according to the specifications will be considered acceptable for payment.

O. PAYMENT

Payment will be based on the BLM’s acceptance of both useable and accurate GPS data and actual treatment and inventory of weeds according to the requirements above.

Payment requires submission of GPS data which includes PAR forms (see section B) hard copy.

Payments will be based upon compliance with all specifications and actual acreage treated/inventoried. Price and payment will be full compensation for the work described in this section. A partial payment may be made by proper invoice from the Contractor, approval by the Contracting Officer, and upon acceptance of deliverables for work completed (per GPS data and PAR reports up to that point).

Payment for areas not completed or unsatisfactory GPS data will be deducted from the payment at the rate per acre specified in the final contract. The standard for acres not treated will be based on data collected by PI or COR or the GPS data provided by the contractor.

St a t e o f Ut a h No xio u s W e e d Lis t & Co u n t y De c la re d No xio u s W e e d Lis t .

Ut a h Noxiou s W e e d Ac t (R68 -9)

Th e fo llo w in g w e e d s a re h e re b y o ffic ia lly d e sig n a t e d a n d p u b lish e d a s n oxiou s fo r t h e St a t e o f Ut a h , a s p e r t h e a u t h o rit y ve st e d in t h e Co m m ission e r o f Ag ricu lt u re a n d Food u n d e r Se c t ion 4 -17-3:

Th e re a re h e re b y d e sig n a t e d five c la sse s o f n oxio u s w e e d s in t h e s t a t e : Cla ss 1A (EDRR W a t ch Lis t ), Cla ss 1 (EDRR), Cla ss 2 (Con t ro l), Cla ss 3 (Con t a in m e n t ), a n d Cla ss 4 (P roh ib it e d fo r sa le o r p ro p a g a t ion ).

Cla s s 1A: Ea rly De t e c t io n Ra p id Re s p o n s e (EDRR) W a t ch Lis t De c la re d n oxio u s a n d in va sive w e e d s n o t n a t ive t o t h e s t a t e o f Ut a h a n d n o t kn ow n t o e xis t in t h e St a t e t h a t p ose a se riou s t h re a t t o t h e s t a t e a n d sh ou ld b e con sid e re d a s a ve ry h ig h p rio rit y.

Com m on c ru p in a – Cru p in a vu lg a ris Africa n ru e – P e g a n u m h a rm a la Sm a ll b u g lo ss – An c h u sa a rve n sis Me d it e rra n e a n sa g e – Sa lvia a e t h iop is Sp rin g m ille t – Miliu m ve rn a le Syria n b e a n ca p e r – Zyg op h yllu m fa b a g o Ve n t e n a t a (Nort h Africa g ra ss) – Ve n t e n a t a d u b ia P lu m e le ss t h is t le – Ca rd u u s a ca n t h o id e s Ma lt a s t a rt h is t le – Ce n t a u re a m e lit e n sis

Cla s s 1B: Ea rly De t e c t io n Ra p id Re s p o n s e (EDRR) De c la re d n oxio u s a n d in va sive w e e d s n o t n a t ive t o t h e St a t e o f Ut a h t h a t a re kn o w n t o e xis t in t h e s t a t e in ve ry lim it e d p op u la t ion s a n d p o se a se riou s t h re a t t o t h e s t a t e a n d sh ou ld b e con sid e re d a s a ve ry h ig h p rio rit y.

Ca m e lt h o rn – Alh a g i m a u ro ru m Ga rlic m u st a rd – Allia ria p e t io la t a P u rp le s t a rt h is t le – Ce n t a u re a ca lc it ra p a Goa t sru e – Ga le g a o ffic in a lis Africa n m u st a rd – Bra ssica t ou rn e fo rt ii Gia n t re e d – Aru n d o d on a x Ja p a n e se kn o t w e e d – P o lyg o n u m cu sp id a t u m Blu e w e e d (Vip e rs b u g lo ss) – Ech iu m vu lg a re Elon g a t e d m u st a rd – Bra ssica e lon g a t a http://www.rules.utah.gov/publicat/code/r068/r068-009.htm

Com m on St . Joh n sw ort – Hyp e ricu m p e rfo ra t u m Oxe ye d a isy – Le u ca n t h e m u m vu lg a re Cu t le a f vip e rg ra ss – Sco rzo n e ra la c in ia t a

Cla s s 2: Co n t ro l De c la re d n oxiou s a n d in va sive w e e d s n o t n a t ive t o t h e s t a t e o f Ut a h , t h a t p ose a t h re a t t o t h e s t a t e a n d sh o u ld b e con sid e re d a h ig h p rio rit y fo r con t ro l. W e e d s lis t e d in t h e con t ro l lis t a re kn o w n t o e xis t in va ryin g p op u la t ion s t h rou g h ou t t h e s t a t e . Th e c o n ce n t ra t ion o f t h e se w e e d s is a t a le ve l w h e re con t ro l o r e ra d ica t ion m a y b e p ossib le .

Le a fy sp u rg e – Eu p h o rb ia e su la Me d u sa h e a d – Ta e n ia t h e ru m ca p u t -m e d u sa e Ru sh ske le t on w e e d – Ch o n d rilla ju n ce a Sp o t t e d kn a p w e e d – Ce n t a u re a s t oe b e P u rp le loose st rife – Lyt h ru m sa lica ria Sq u a rro se kn a p w e e d – Ce n t a u re a virg a t a Dye rs w o a d – Isa t is t in c t o ria Ye llow st a rt h is t le – Ce n t a u re a so ls t it ia lis Ye llow t o a d fla x – Lin a ria vu lg a ris Diffu se kn a p w e e d – Ce n t a u re a d iffu sa Bla ck h e n b a n e – Hyoscya m u s n ig e r Da lm a t io n t oa d fla x – Lin a ria d a lm a t ica

Cla s s 3: Co n t a in m e n t De c la re d n oxiou s a n d in va sive w e e d s n o t n a t ive t o t h e St a t e o f Ut a h t h a t a re w id e ly sp re a d . W e e d s lis t e d in t h e con t a in m e n t n oxio u s w e e d s lis t a re kn ow n t o e xis t in va rio u s p op u la t ion s t h rou g h ou t t h e s t a t e . W e e d co n t ro l e ffo rt s m a y b e d ire c t e d a t re d u c in g o r e lim in a t in g n e w o r e xp a n d in g w e e d p op u la t ion s . Kn ow n a n d e st a b lish e d w e e d p op u la t ion s , a s d e t e rm in e d b y t h e w e e d con t ro l a u t h o rit y, m a y b e m a n a g e d b y a n y a p p rove d w e e d con t ro l m e t h od o log y, a s d e t e rm in e d b y t h e w e e d con t ro l a u t h o rit y. Th e se w e e d s p ose a t h re a t t o t h e a g ricu lt u ra l in d u st ry a n d a g ricu lt u ra l p rod u c t s .

Ru ssia n kn a p w e e d – Acrop t ilon re p e n s Hou n d st ou n g e – Cyn og lossu m o ffic ia n a le P e re n n ia l p e p p e rw e e d (Ta ll w h it e t op ) – Le p id iu m la t ifo liu m P h ra g m it e s (Com m on re e d ) – P h ra g m it e s a u st ra lis ssp .

Ta m a risk (Sa lt ce d a r) – Ta m a rix ra m osiss im a Hoa ry c re ss – Ca rd a ria sp p .

Ca n a d a t h is t le – Cirs iu m a rve n se P o ison h e m lock – Con iu m m a cu la t u m Mu sk t h is t le – Ca rd u u s n u t a n s Qu a ckg ra ss – Elym u s re p e n s Jo in t e d g oa t g ra ss – Ae g ilop s cylin d rica

Be rm u d a g ra ss* – Cyn od o n d a c t ylon P e re n n ia l So rg h u m sp p .: Joh n son Gra ss (So rg h u m h a le p e n se ) a n d So rg h u m a lm u m (So rg h u m a lm u m ).

Sco t ch t h is t le (Co t t on t h is t le ) – On op o rd u m a ca n t h iu m Fie ld b in d w e e d (W ild Morn in g -g lo ry) – Con vo lvu lu s sp p .

P u n c t u re vin e (Goa t h e a d ) – Trib u lu s t e rre s t ris

*Be rm u d a g ra ss (Cyn od on d a c t ylon ) sh a ll n o t b e a n oxiou s w e e d in W a sh in g t on Cou n t y a n d sh a ll n o t b e su b je c t t o p rovis ion s o f t h e Ut a h Noxiou s W e e d La w w it h in t h e b o u n d a rie s o f t h a t cou n t y. It sh a ll b e a n oxio u s w e e d t h rou g h ou t a ll o t h e r a re a s o f t h e St a t e o f Ut a h a n d sh a ll b e su b je c t t o t h e la w s t h e re in .

Cla s s 4 : P ro h ib it e d De c la re d n oxiou s a n d in va sive w e e d s, n o t n a t ive t o t h e s t a t e o f Ut a h , t h a t p ose a t h re a t t o t h e s t a t e t h ro u g h t h e re t a il sa le o r p rop a g a t ion in t h e n u rse ry a n d g re e n h o u se in d u st ry. P ro h ib it e d n oxiou s w e e d s a re a n n u a l, b ie n n ia l, o r p e re n n ia l p la n t s t h a t t h e co m m ission e r d e sig n a t e s a s h a vin g t h e p o t e n t ia l o r a re kn ow n t o b e d e t rim e n t a l t o h u m a n o r a n im a l h e a lt h , t h e e n viro n m e n t , p u b lic roa d s, c rop s, o r o t h e r p ro p e rt y.

Cog on g ra ss (Ja p a n e se b lood g ra ss) – Im p e ra t a cylin d rica Myrt le sp u rg e – Eu p h o rb ia m yrsin it e s Da m e s Rocke t – He sp e ris m a t ron a lis Sco t ch b room – Cyt isu s scop a riu s Ru ssia n o live – Ela e a g n u s a n g u st ifo lia

Ea ch cou n t y in Ut a h m a y h a ve d iffe re n t p rio rit ie s re g a rd in g sp e c ific St a t e d e sig n a t e d Noxiou s W e e d s a n d is t h e re fo re a b le t o re p rio rit ize t h e se w e e d s fo r t h e ir o w n n e e d s.

Th e W e e d Sp e c ia lis t coo rd in a t e s w e e d con t ro l a c t ivit ie s a m on g t h e c ou n t y w e e d o rg a n iza t ion s a n d t h e a g ricu lt u ra l fie ld re p re se n t a t ive s . Su rve ys o f se riou s w e e d in fe st a t ion s a re co n d u c t e d a n d con t ro l p rog ra m s a re d e ve lop e d t h rou g h t h e cou n t y su p e rviso rs , cou n t y w e e d b oa rd s , a n d va riou s la n d ow n in g a g e n c ie s . Th e w e e d sp e c ia lis t a n d t h e in sp e c t o rs w ork con t in u a lly w it h e xt e n sion a n d re se a rch p e rson n e l in e n co u ra g in g t h e u se o f t h e m ost e ffe c t ive m e t h od s t o con t ro l t h e m ore se riou s w e e d s.

Th is e n t ry w a s la s t u p d a t e d on Ju n e 6 , 20 19.

https://ag.utah.gov/farmers/plants-industry/noxious-weed-control-resources/state-of-utah-noxious-weed-list/

Be a ve r a n d Iro n Co u n t y d e s ig n a t e d No xio u s W e e d s County Declared Noxious Weeds Beaver Bullthistle Box Elder Catchweed Cache Goatsrue, Puncturevine Carbon Russian Olive Dagget Davis Buffaloburr, Yellow Nutshedge Duchesne Russian Olive, Water Hemlock, Emery None Garfield None Grand Russian Olive Iron Whorled Milkweed, Bull Thistle, Puncturevine Juab Blue Flowering Lettuce Kane None Millard None Morgan Burdock Piute None Rich None Salt Lake Myrtle Spurge, Garlic Mustard San Juan Whorled Milkweed, Camelthorn, Buffaloburr, Russian Olive Sanpete None Sevier Russian Olive Summit Burdock, Vipers Bugloss Tooele Jointed Goatgrass Uintah Russian Olive Utah Phragmities Wasatch None Washington Whorled Milkweed, Selverleaf Nightshade Wayne Bull Thistle, Russian Olive Weber Puncturevine

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5495 Daniel W. Simms Division of | Revision No.: 21 Director Wage Determinations| Date Of Last Revision: 12/26/2023

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Utah

Area: Utah Counties of Beaver, Garfield, Iron, Kane

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.35*** 01012 - Accounting Clerk II 16.11*** 01013 - Accounting Clerk III 18.02 01020 - Administrative Assistant 23.53 01035 - Court Reporter 19.50 01041 - Customer Service Representative I 14.09*** 01042 - Customer Service Representative II 15.37*** 01043 - Customer Service Representative III 17.25 01051 - Data Entry Operator I 13.16*** 01052 - Data Entry Operator II 14.36*** 01060 - Dispatcher, Motor Vehicle 22.06 01070 - Document Preparation Clerk 14.10*** 01090 - Duplicating Machine Operator 14.10*** 01111 - General Clerk I 13.35*** 01112 - General Clerk II 14.57*** 01113 - General Clerk III 16.35***

01120 - Housing Referral Assistant 21.04 01141 - Messenger Courier 12.47*** 01191 - Order Clerk I 14.01*** 01192 - Order Clerk II 15.29*** 01261 - Personnel Assistant (Employment) I 16.89*** 01262 - Personnel Assistant (Employment) II 18.88 01263 - Personnel Assistant (Employment) III 21.04 01270 - Production Control Clerk 21.77 01290 - Rental Clerk 13.99*** 01300 - Scheduler, Maintenance 16.89*** 01311 - Secretary I 16.89*** 01312 - Secretary II 18.88 01313 - Secretary III 21.04 01320 - Service Order Dispatcher 19.72 01410 - Supply Technician 23.53 01420 - Survey Worker 17.48 01460 - Switchboard Operator/Receptionist 13.71*** 01531 - Travel Clerk I 13.88*** 01532 - Travel Clerk II 14.77*** 01533 - Travel Clerk III 15.47*** 01611 - Word Processor I 15.29*** 01612 - Word Processor II 17.16*** 01613 - Word Processor III 19.20 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 19.06 05010 - Automotive Electrician 18.09 05040 - Automotive Glass Installer 17.17*** 05070 - Automotive Worker 17.14*** 05110 - Mobile Equipment Servicer 15.24*** 05130 - Motor Equipment Metal Mechanic 18.82 05160 - Motor Equipment Metal Worker 17.14*** 05190 - Motor Vehicle Mechanic 17.88 05220 - Motor Vehicle Mechanic Helper 14.11*** 05250 - Motor Vehicle Upholstery Worker 16.19*** 05280 - Motor Vehicle Wrecker 17.14*** 05310 - Painter, Automotive 18.09 05340 - Radiator Repair Specialist 17.14*** 05370 - Tire Repairer 14.14*** 05400 - Transmission Repair Specialist 18.46 07000 - Food Preparation And Service Occupations 07010 - Baker 15.44*** 07041 - Cook I 14.54*** 07042 - Cook II 16.91*** 07070 - Dishwasher 9.30*** 07130 - Food Service Worker 11.20*** 07210 - Meat Cutter 14.01*** 07260 - Waiter/Waitress 10.64*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 24.06 09040 - Furniture Handler 14.79*** 09080 - Furniture Refinisher 24.06 09090 - Furniture Refinisher Helper 17.74 09110 - Furniture Repairer, Minor 20.89 09130 - Upholsterer 24.06 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 12.94*** 11060 - Elevator Operator 13.53*** 11090 - Gardener 18.72 11122 - Housekeeping Aide 13.97*** 11150 - Janitor 13.97*** 11210 - Laborer, Grounds Maintenance 14.51*** 11240 - Maid or Houseman 11.80*** 11260 - Pruner 13.44*** 11270 - Tractor Operator 17.18*** 11330 - Trail Maintenance Worker 14.51***

11360 - Window Cleaner 15.08*** 12000 - Health Occupations 12010 - Ambulance Driver 14.67*** 12011 - Breath Alcohol Technician 20.27 12012 - Certified Occupational Therapist Assistant 27.81 12015 - Certified Physical Therapist Assistant 27.81 12020 - Dental Assistant 16.76*** 12025 - Dental Hygienist 36.96 12030 - EKG Technician 30.73 12035 - Electroneurodiagnostic Technologist 30.73 12040 - Emergency Medical Technician 14.67*** 12071 - Licensed Practical Nurse I 18.12 12072 - Licensed Practical Nurse II 20.27 12073 - Licensed Practical Nurse III 22.60 12100 - Medical Assistant 16.91*** 12130 - Medical Laboratory Technician 18.35 12160 - Medical Record Clerk 15.29*** 12190 - Medical Record Technician 21.36 12195 - Medical Transcriptionist 18.12 12210 - Nuclear Medicine Technologist 44.56 12221 - Nursing Assistant I 11.93*** 12222 - Nursing Assistant II 13.40*** 12223 - Nursing Assistant III 14.62*** 12224 - Nursing Assistant IV 16.43*** 12235 - Optical Dispenser 19.31 12236 - Optical Technician 18.12 12250 - Pharmacy Technician 17.53 12280 - Phlebotomist 17.33 12305 - Radiologic Technologist 29.26 12311 - Registered Nurse I 24.18 12312 - Registered Nurse II 29.58 12313 - Registered Nurse II, Specialist 29.58 12314 - Registered Nurse III 35.78 12315 - Registered Nurse III, Anesthetist 35.78 12316 - Registered Nurse IV 42.90 12317 - Scheduler (Drug and Alcohol Testing) 25.12 12320 - Substance Abuse Treatment Counselor 28.79 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 16.49*** 13012 - Exhibits Specialist II 20.44 13013 - Exhibits Specialist III 25.00 13041 - Illustrator I 18.72 13042 - Illustrator II 23.20 13043 - Illustrator III 28.30 13047 - Librarian 22.73 13050 - Library Aide/Clerk 10.45*** 13054 - Library Information Technology Systems 20.53 Administrator 13058 - Library Technician 13.18*** 13061 - Media Specialist I 14.81*** 13062 - Media Specialist II 16.57*** 13063 - Media Specialist III 18.48 13071 - Photographer I 15.59*** 13072 - Photographer II 17.59 13073 - Photographer III 21.61 13074 - Photographer IV 26.44 13075 - Photographer V 31.98 13090 - Technical Order Library Clerk 15.49*** 13110 - Video Teleconference Technician 16.34*** 14000 - Information Technology Occupations 14041 - Computer Operator I 18.28 14042 - Computer Operator II 20.45 14043 - Computer Operator III 23.88 14044 - Computer Operator IV 26.32 14045 - Computer Operator V 29.16

14071 - Computer Programmer I (see 1) 25.67 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.28 14160 - Personal Computer Support Technician 26.32 14170 - System Support Specialist 29.39 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 31.89 15020 - Aircrew Training Devices Instructor (Rated) 38.58 15030 - Air Crew Training Devices Instructor (Pilot) 42.72 15050 - Computer Based Training Specialist / Instructor 31.89 15060 - Educational Technologist 27.62 15070 - Flight Instructor (Pilot) 42.72 15080 - Graphic Artist 22.82 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 42.72 15086 - Maintenance Test Pilot, Rotary Wing 42.72 15088 - Non-Maintenance Test/Co-Pilot 42.72 15090 - Technical Instructor 19.36 15095 - Technical Instructor/Course Developer 23.68 15110 - Test Proctor 15.62*** 15120 - Tutor 15.62*** 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 10.41*** 16030 - Counter Attendant 10.41*** 16040 - Dry Cleaner 13.84*** 16070 - Finisher, Flatwork, Machine 10.41*** 16090 - Presser, Hand 10.41*** 16110 - Presser, Machine, Drycleaning 10.41*** 16130 - Presser, Machine, Shirts 10.41*** 16160 - Presser, Machine, Wearing Apparel, Laundry 10.41*** 16190 - Sewing Machine Operator 14.85*** 16220 - Tailor 15.73*** 16250 - Washer, Machine 11.62*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.06 19040 - Tool And Die Maker 30.08 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.35 21030 - Material Coordinator 22.21 21040 - Material Expediter 22.21 21050 - Material Handling Laborer 14.80*** 21071 - Order Filler 13.16*** 21080 - Production Line Worker (Food Processing) 17.35 21110 - Shipping Packer 16.72*** 21130 - Shipping/Receiving Clerk 16.72*** 21140 - Store Worker I 14.82*** 21150 - Stock Clerk 18.37 21210 - Tools And Parts Attendant 17.35 21410 - Warehouse Specialist 17.35 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 27.01 23019 - Aircraft Logs and Records Technician 20.89 23021 - Aircraft Mechanic I 25.62 23022 - Aircraft Mechanic II 27.01 23023 - Aircraft Mechanic III 28.50 23040 - Aircraft Mechanic Helper 17.74 23050 - Aircraft, Painter 24.06 23060 - Aircraft Servicer 20.89 23070 - Aircraft Survival Flight Equipment Technician 24.06 23080 - Aircraft Worker 22.47 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 22.47

I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 25.62

II

23110 - Appliance Mechanic 24.06 23120 - Bicycle Repairer 19.32 23125 - Cable Splicer 38.04 23130 - Carpenter, Maintenance 20.60 23140 - Carpet Layer 21.30 23160 - Electrician, Maintenance 23.96 23181 - Electronics Technician Maintenance I 22.47 23182 - Electronics Technician Maintenance II 24.06 23183 - Electronics Technician Maintenance III 25.62 23260 - Fabric Worker 20.89 23290 - Fire Alarm System Mechanic 25.62 23310 - Fire Extinguisher Repairer 19.32 23311 - Fuel Distribution System Mechanic 25.62 23312 - Fuel Distribution System Operator 19.32 23370 - General Maintenance Worker 17.92 23380 - Ground Support Equipment Mechanic 25.62 23381 - Ground Support Equipment Servicer 20.89 23382 - Ground Support Equipment Worker 22.47 23391 - Gunsmith I 19.32 23392 - Gunsmith II 22.47 23393 - Gunsmith III 25.62 23410 - Heating, Ventilation And Air-Conditioning 21.82 Mechanic 23411 - Heating, Ventilation And Air Contidioning 23.00 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 26.25 23440 - Heavy Equipment Operator 22.66 23460 - Instrument Mechanic 25.62 23465 - Laboratory/Shelter Mechanic 24.06 23470 - Laborer 14.80*** 23510 - Locksmith 24.06 23530 - Machinery Maintenance Mechanic 23.89 23550 - Machinist, Maintenance 25.95 23580 - Maintenance Trades Helper 17.58 23591 - Metrology Technician I 25.62 23592 - Metrology Technician II 27.01 23593 - Metrology Technician III 28.50 23640 - Millwright 25.62 23710 - Office Appliance Repairer 24.06 23760 - Painter, Maintenance 19.58 23790 - Pipefitter, Maintenance 23.75 23810 - Plumber, Maintenance 22.94 23820 - Pneudraulic Systems Mechanic 25.62 23850 - Rigger 25.62 23870 - Scale Mechanic 22.47 23890 - Sheet-Metal Worker,…