Sol_140FS125Q0078.pdf

SEE ADDENDUMIS CHECKED

CODE 18a. PAYMENT WILL BE MADE BY

CODE

FACILITYCODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN OFFER

OFFEROR

FS1

Falls Church VA 22041 5275 Leesburg Pike FWS, SAT Team 1

FWS SAT 1

CODE 16. ADMINISTERED BYCODE

X

X

X

336991

SIZE STANDARD:

100.00 % FOR:SET ASIDE:UNRESTRICTED ORFS1

REQUEST FOR

PROPOSAL

(RFP)

INVITATION

FOR BID (IFB)

10. THIS ACQUISITION ISCODE

REQUEST FOR

QUOTE (RFQ)

14. METHOD OF SOLICITATION

13b. RATING

NORTH AMERICAN INDUSTRY

CLASSIFICATION STANDARD

(NAICS):

SMALL BUSINESS

05/01/2025 1700 ED

04/21/2025

0000000000Kathryn Coltran (No collect calls)

INFORMATION CALL:

FOR SOLICITATION 8. OFFER DUE DATE/LOCAL TIMEb. TELEPHONE NUMBER a. NAME

4. ORDER NUMBER3. AWARD/ 6. SOLICITATION

140FS125Q0078

5. SOLICITATION NUMBER

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS 1. REQUISITION NUMBER PAGE OF

1 49 0044013336OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30

TELEPHONE NO.

17a. CONTRACTOR/

Multiple Destinations

15. DELIVER TO

Falls Church VA 22041 5275 Leesburg Pike FWS, SAT Team 1

9. ISSUED BY

7.

2. CONTRACT NO.

EFFECTIVE DATE

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK BELOW

ISSUE DATE

DELIVERY FOR FREE ON BOARD

(FOB) DESTINATION UNLESS

BLOCK IS MARKED

11.

SEE SCHEDULEX

12. DISCOUNT TERMS THIS CONTRACT IS A RATED

ORDER UNDER THE DEFENSE

PRIORITIES AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

13a.

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

8(A)

FWS SAT 1

WOMEN-OWNED SMALL

BUSINESS (WOSB)

ECONOMICALLY DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Purchase a UTV, trailer and sprayer to use as part of our MIPR program

TECHNICAL POC: JAMES REBHOLZ PHONE:(509) 528-4195

Contract POC Kathy Coltran kathryn_coltran@fws.gov

00010 MIPR UTV 1 EA

Requisition No: 0044013336

Continued ...

(Use Reverse and/or Attach Additional Sheets as Necessary)

HEREIN, IS ACCEPTED AS TO ITEMS:

X

XX

DATED

Chelsea Devivo

. YOUR OFFER ON SOLICITATION (BLOCK 5),

INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE SET FORTH

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND DELIVER

ARE

ARE

31c. DATE SIGNED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or print)

ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY ADDITIONAL

SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED.

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4. FAR 52.212-3

AND 52.212-5 ARE ATTACHED. ADDENDA

26. TOTAL AWARD AMOUNT (For Government Use Only)

OFFER

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

ARE NOT ATTACHED.

ARE NOT ATTACHED.

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

30b. NAME AND TITLE OF SIGNER (Type or print)

30a. SIGNATURE OF OFFEROR/CONTRACTOR

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

25. ACCOUNTING AND APPROPRIATION DATA

29. AWARD OF CONTRACT: REFERENCE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32c. DATE 32b. SIGNATURE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED

40. PAID BY39. S/R VOUCHER NUMBER38. S/R ACCOUNT NUMBER

37. CHECK NUMBER

FINALPARTIAL

36. PAYMENT

FINALPARTIAL

35. AMOUNT VERIFIED

CORRECT FOR

34. VOUCHER NUMBER33. SHIP NUMBER

COMPLETE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42d. TOTAL CONTAINERS42c. DATE REC'D (YY/MM/DD)

42b. RECEIVED AT (Location)

42a. RECEIVED BY (Print)

41c. DATE41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

STANDARD FORM 1449 (REV. 11/2021) BACK

24.

AMOUNT

23.

UNIT PRICE

22.

UNIT

21.

QUANTITY

20.

SCHEDULE OF SUPPLIES/SERVICES

19.

ITEM NO.

Delivery: 08/31/2025

Delivery Location Code: 0011279457

FWS MCNARY NATIONAL WILDLIFE REFUGE

C/O MID-COLUMBIA NWR COMPLEX

64 MAPLE STREET

BURBANK WA 99323-1447 US

Period of Performance: 05/01/2025 to 08/31/2025

00020 trailer 1 EA

Requisition No: 0044013336

Delivery: 08/31/2025

Delivery Location Code: 0011280818

FWS Central Washington NWRC

64 MAPLE STREET

BURBANK WA 99323-8521 US

Period of Performance: 05/01/2025 to 08/31/2025

00030 sprayer 1 EA

Requisition No: 0044013336

Delivery: 08/31/2025

Delivery Location Code: 0011280818

FWS Central Washington NWRC

64 MAPLE STREET

Continued ...

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT REPRESENTATIVE

49 2 of

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

NAME OF OFFEROR OR CONTRACTOR

3 49

CONTINUATION SHEET

REFERENCE NO. OF DOCUMENT BEING CONTINUED PAGE OF

(A) (B) (C) (D) (E) (F)

140FS125Q0078

BURBANK WA 99323-8521 US

Period of Performance: 05/01/2025 to 08/31/2025

NSN 7540-01-152-8067 OPTIONAL FORM 336 (4-86)

Sponsored by GSA

FAR (48 CFR) 53.110

WA Central WA NWRC UTV Trailer Sprayer Solicitation No. 140FS125Q0078

FWS

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued.

U.S. Fish and Wildlife Service, Multiple locations in Central WA have a requirement for a UTV, Trailer and sprayer (see attached SOW). The anticipated required delivery date is 08/31/2025.

This Request for Quotation (RFQ) is total small business set aside and is conducted under the procedures of FAR Part 6, incorporating provisions and clauses in effect through Federal Acquisition Circular 2022-

04. The NAICS code is 336991.

Instructions All responsible sources may submit a quote, which shall be considered by the agency. Award will be made as a firm-fixed-price contract. The basis of award is the price and other factors. The contract will be awarded to the vendor who proposes the best value product which meets the specifications. Award will be made to a responsible source pursuant to FAR subpart 9.1. Delivery is FOB destination.

Please submit your quotation (showing unit and total price) on company letterhead with UEI No. and point of contact phone number and e-mail address. Additionally, if your company holds a GSA contract that would apply to this requirement, please provide the contract number. Refer to FAR provision 52.212-1 Instructions to Offerors – Commercial Items for additional submission guidance and include a copy of FAR provision 52.212-3 Offeror Representations and Certifications --Commercial Items with applicable sections completed.

Solicitation Questions Due: 04/28/2025 @ 1700 ET to kathryn_coltran@fws.gov Quotes Due: 05/01/2025 @ 1700ET E-Mail Quote Submission: kathryn_coltran@fws.gov

In order to have a quote considered for award, respondent must be registered at the System for Award Management (SAM) website (https://www.sam.gov) as an active vendor by the time an award decision is necessary.

mailto:kathryn_coltran@fws.gov

SALIENT CHARACTERISTICS/MINIMUM SPECIFICATIONS

The US Fish and Wildlife Service, Central WA NWRC, located at 64 Maple Street Burbank, WA 99323, has a requirement for one Kubota RTV-X1100CWL-A or Approved Equal, in accordance with the following Salient Characteristics/Minimum Specifications:

Salient Characteristics/Minimum Requirements

• Description: The vehicle shall be a current year, selectable 2WD/4WD, with enclosed cab and doors, and a hydraulic-actuated dump bed. Overall length shall be approximately 121 inches and a width of approximately 64 inches. The wheelbase shall be approximately 81 inches. The cab will have a roll over protection system (ROPS), satisfying SAE J2194 and OSHO 1928 standards.

• Motor: the vehicle shall be equipped with a liquid cooled, 3-cylinder diesel motor, outputting approximately 23hp.

• Transmission and Drivetrain: The vehicle shall be equipped with a Variable Hydro Transmission (VHT-X), with two forward speeds (Low and High) and Reverse. Vehicle shall have a limited-slip front differential and a driver-actuated rear locking differential.

• Suspension: Front and rear suspension shall be independent and adjustable, with approximately 8 in. of suspension travel, and approximately 10 in. of ground clearance.

• Brakes: The vehicle shall be equipped with front and rear disc brakes.

• Wheels and Tires: The vehicle shall be equipped with 25 X 10 – 12, 6ply ATV tires on steel

• Fuel Tank: The vehicle shall be equipped with a 7.9 gal fuel tank that meet state and federal regulations.

• Front Bumper: The vehicle will come equipped with a deluxe front guard (radiator guard, bumper, and lens guard).

• Cab: The cab will be a fully enclosed two door cab with a roof. Doors will have roll-down windows. Wind shield shall be equipped with a wiper.

• Seating: all seating positions shall have DOT certified seat belts.

• Steering Wheel: Steering wheel will be an adjustable tilt steering wheel.

• Air Conditioning and Heating: the vehicle will come equipped with an A/C, defroster and heating) system.

• Instrument Guage: the vehicle will come equipped with a speedometer and digital multi-meter,

• Lighting: The vehicle shall come equipped with headlights and rear brake lights.

• Hitch Type: The vehicle shall come equipped with a rear 2-inch hitch receiver.

• Tow Rating: Vehicle shall be capable of towing approximately 1300 lbs.

• Cargo Bed: The vehicle shall come with a cargo bed, rear of the cab with hydraulic lift assist.

Dimensions shall be approximately 57.7 X 40.5 X 11.2 in. Payload capacity shall be approximately 1100 lbs. The cargo bed should have a tailgate, and a storage capacity of approximately 15 cu ft.

• Warranty: The contractor shall provide a factory, 2-year or 1000-hour warranty.

Additional Equipment The contractor shall provide the following additional items.

• Single Accessory Wire Harness Kit

• Side Mirror Kit – Cab (1)

• CV-J Guard Kit - Front

• Keys: Provide two (2) key sets for the vehicle.

a requirement for one bumper-pull trailer to transport the above-requested equipment, in accordance with the following Salient Characteristics/Minimum Specifications:

Salient Characteristics/Minimum Requirements

• Description: The trailer shall be a current year, open deck, bumper-pull trailer capable of transporting the above-requested equipment and an additional 1000 lbs.

The trailer shall have the following characteristics:

o Trailer needs be the length and width necessary to safely load and secure the above-requested equipment. No additional trailer deck length is necessary beyond that needed accommodate the overall length of the above-requested equipment and tie-down locations.

o The trailer GVWR shall be the minimum necessary to accommodate the above requirements and load including UTV as specified, full tank of fuel, and up-to 1000 lbs of additional, user-added equipment mounted to the UTV. Trailer shall be suitable for towing by a modern, half-ton pickup truck with a tow rating Not to Exceed 10,000 lbs o Trailer shall have tandem axles with a combined weight rating to satisfy the above load requirements.

o Trailer shall have an integrated, drive-on ramp or stowable loading ramps.

o Trailer shall have suitable tie-down points for safely securing the above-described equipment.

o Trailer shall have a coupler suitable for 2 in. or 2-5/16 in ball hitches, as dictated by the

GVWR of the trailer.

a requirement for one F/S Manufacturing Dakota 100 gal UTV 12v pump boomless skid sprayer (FSDAK- 100-E) for chemical/herbicide applications to be mounted in the cargo bed of the above-requested equipment, in accordance with the following Salient Characteristics/Minimum Specifications:

Salient Characteristics/Minimum Requirements

• Description: The UTV sprayer shall be a low-profile, fully contained skid-mounted unit that includes tank, gas-powered engine, pump, hose reel and spray wand, plumbing for a boom or boomless spray system, and a boomless spray system.

The sprayer shall have the following characteristics:

o Sprayer shall fit entirely within the cargo bed of the above-requested UTV. It shall be removeable and have fork slots to ease removal with forklift. When installed sprayer unit shall be safely and securely mounted to the cargo bed. Removal or lowering of the above-requested UTV tailgate while unit is in use is acceptable.

o The sprayer tank shall be a low-profile design to maintain the lowest center of gravity feasible.

o The sprayer tank shall have a volume of 100 gal.

o Sprayer shall have a hose reel and hand spray wand.

o Sprayer shall have a boomless mount kit and SS Hypro XT nozzles, capable of 22-30 ft of spray coverage.

o The boomless sprayer shall be low profile and not extend beyond the width o-f the above-requested UTV when mounted and in use, and it should be easily removed/disconnected for removal and storage of entire unit.

o Sprayer shall be powered by a 12v electric pump capable of 7 gpm and up to 70 psi.

o Sprayer shall have manual TeeJet® shutoff and regulating valves, and a liquid-filled pressure gauge visible from the cab of the UTV.

o Sprayer shall have a control arm that allows access to manual controls from the UTV operator’s (driver’s) seat. Control arm shall be a design to allow easy entry and exit from the UTV.

o All fittings, hoses, diaphragms, valves, etc. shall be suitable for use with chemical herbicides.

o Tank shall have a remote drain to reduce chemical spills in the cargo bed.

Central WA NWRC Utility Vehicle UTV Herbicide Sprayer, Trailer Specifications

1. General Requirements

1.1. General Statement of Work

The Department of the Interior (DOI), US Fish and Wildlife Service (USFWS) has a requirement to purchase one utility vehicle (UTV, commonly referred to as a Side-x-Side), one UTV-mounted herbicide sprayer, and a trailer for transport to be used in the support of biological and management activities on Military Installations and Complex Monument and Refuges, in accordance with this specification. The vehicle chassis shall be designed for severe off-road use and constructed to handle the rough, unimproved road and environmental conditions found throughout the United States. The contractor shall provide units to meet USFWS requirements, the American National Standards Institute (ANSI) and the Recreational Off-Highway Vehicle Association (ROHVA) unless otherwise stated within this specification. The requirements within this specification are minimum requirements that each apparatus must meet, the contractor may offer additional features and components.

1.2. Workmanship Requirements

The installation of hardware parts such as hinges, catches, handles, or knobs shall be accomplished to avoid damaging the hardware or the mounting surface. After assembly, all parts shall be cleaned of smudges, loose, spattered, or excess welding, metal chips or filings, or any other foreign material which might detract from the intended operation, function, or appearance of the apparatus or its equipment. This would include any particles which could loosen or become dislodged during the normal expected life of the equipment. Whenever possible, this cleaning shall take place before the parts are assembled.

Threaded parts or devices shall show no evidence of cross-threading, mutilation, or detrimental burrs. All screw type and rivet fasteners shall be tight to allow no relative movement between the attached parts. All bolts and screws shall not be tightened in excess of the SAE torque standard established for the grade, screw, and thread type.

All wire shall be protected from tears, abrasions, cuts, etc. from loose items within compartment spaces, and from items present in the operating environment outside of the compartments. Special care shall be taken to conceal wiring and tucked away to keep from hanging low, prevent catching on brush, rocks, and various other items present in the off-road environment.

Guards, shields, or other protection shall be provided where necessary and requested in order to protect personnel from injury from hot, moving or rotating parts during non-maintenance operations, to protect fragile equipment from becoming damaged when operated off road, and to protect from sharp edges or corners.

Components shall be located for ease of inspection, routine maintenance or removal.

Drains, oil and fuel filters, filler plugs, grease fittings, air and water lines etc. shall be located so that they are readily accessible and do not require special tools for servicing.

Lube extensions, oil drain, fill extensions, or special tools required for minor chassis maintenance shall be provided by the contractor. Securing of air, water, fuel and/or electrical lines, looms or harnesses shall not utilize stick-on/adhesive backed fasteners;

insulated metal clamps or clips shall be used. Nothing shall be permitted to hang loose from apparatus.

1.3. Carrying Capacity

The utility vehicle components and suspension shall be capable of withstanding the stresses of use in the road-less environment at full Gross Vehicle Weight Rating (GVWR) and Gross Axle Weight Rating (GAWR). The GAWR and GVWR of the vehicle shall not be exceeded when loaded to its in-service weight. The trailer chassis, suspension, and axles shall be capable of withstanding use on primary and graveled secondary roads at GVWR and GAWR. Sprayer capacities shall

Minimum Capacities:

UTV:

A. Personnel – 2 B. The allowance for miscellaneous equipment shall be approximately 1000lbs.

UTV Sprayer:

A. 100 gal B. 7gpm and 70psi C. Boomless spray system and hose reel with hand wand capabilities.

Trailer:

A. Bumper-pull trailer capable of transporting the above-requested UTV and sprayer (with empty tank).

2. Administrative Requirements

2.1 Quote General Information

All submitted quotations should be specific in regard to location, quantity, brand, model, and how the contractor will address each component listed in this Request for Quotation (RFQ). All submissions will be evaluated and those found incomplete can be removed from further consideration.

2.2 Quote Submission Package Contents

1 of 3: UTV

Description: The vehicle shall be a current year, selectable 2WD/4WD, with enclosed cab and doors, and a hydraulic-actuated dump bed. Overall length shall be approximately 121 inches and a width of approximately 64 inches. The wheelbase shall be approximately 81 inches. The cab will have a roll over protection system (ROPS), satisfying SAE J2194 and OSHO 1928 standards.

• Motor: the vehicle shall be equipped with a liquid cooled, 3-cylinder diesel motor, outputting approximately 23hp.

• Transmission and Drivetrain: The vehicle shall be equipped with a Variable Hydro Transmission (VHT-X), with two forward speeds (Low and High) and Reverse. Vehicle shall have a limited-slip front differential and a driver-actuated rear locking differential.

• Suspension: Front and rear suspension shall be independent and adjustable, with approximately 8 in. of suspension travel, and approximately 10 in. of ground clearance.

• Brakes: The vehicle shall be equipped with front and rear disc brakes.

• Wheels and Tires: The vehicle shall be equipped with 25 X 10 – 12, 6ply ATV tires on steel

• Fuel Tank: The vehicle shall be equipped with a 7.9-gal fuel tank that meet state and federal regulations.

• Front Bumper: The vehicle will come equipped with a deluxe front guard (radiator guard, bumper, and lens guard).

• Cab: The cab will be a fully enclosed two door cab with a roof. Doors will have roll-down windows. Wind shield shall be equipped with a wiper.

• Seating: all seating positions shall have DOT certified seat belts.

• Steering Wheel: Steering wheel will be an adjustable tilt steering wheel.

• Air Conditioning and Heating: the vehicle will come equipped with an A/C, defroster and heating) system.

• Instrument Guage: the vehicle will come equipped with a speedometer and digital multi-meter,

• Lighting: The vehicle shall come equipped with headlights and rear brake lights.

• Hitch Type: The vehicle shall come equipped with a rear 2-inch hitch receiver.

• Tow Rating: Vehicle shall be capable of towing approximately 1300 lbs.

• Cargo Bed: The vehicle shall come with a cargo bed, rear of the cab with hydraulic lift assist. Dimensions shall be approximately 57.7 X 40.5 X 11.2 in. Payload capacity shall be approximately 1100 lbs. The cargo bed should have a tailgate, and a storage capacity of approximately 15 cu ft.

• Warranty: The contractor shall provide a factory, 2-year or 1000-hour warranty.

Additional Equipment

The contractor shall provide the following additional items.

• Single Accessory Wire Harness Kit

• Side Mirror Kit – Cab (1)

• CV-J Guard Kit - Front

• Keys: Provide two (2) key sets for the vehicle.

2 of 3: TRAILER

Description: The trailer shall be a current year, open deck, bumper-pull trailer capable of transporting the above-requested equipment and an additional 1000 lbs.

The trailer shall have the following characteristics:

o Trailer needs be the length and width necessary to safely load and secure the above-requested equipment. No additional trailer deck length is necessary beyond that needed accommodate the overall length of the above-requested equipment and tie-down locations.

o The trailer GVWR shall be the minimum necessary to accommodate the above requirements and load including UTV as specified, full tank of fuel, and up-to 1000 lbs of additional, user-added equipment mounted to the UTV.

Trailer shall be suitable for towing by a modern, half-ton pickup truck with a tow rating Not to Exceed 10,000 lbs o Trailer shall have tandem axles with a combined weight rating to satisfy the above load requirements.

o Trailer shall have an integrated, drive-on ramp or stowable loading ramps.

o Trailer shall have suitable tie-down points for safely securing the above-described equipment.

o Trailer shall have a coupler suitable for 2 in. or 2-5/16 in ball hitches, as dictated by the GVWR of the trailer.

3 of 3: UTV Herbicide/Chemical Sprayer

Description: The UTV sprayer shall be a low-profile, fully contained skid-mounted unit that includes tank, gas-powered engine, pump, hose reel and spray wand, plumbing for a boom or boomless spray system, and a boomless spray system.

The sprayer shall have the following characteristics:

o Sprayer shall fit entirely within the cargo bed of the above-requested UTV. It shall be removeable and have fork slots to ease removal with forklift. When installed sprayer unit shall be safely and securely mounted to the cargo bed.

Removal or lowering of the above-requested UTV tailgate while unit is in use is acceptable.

o The sprayer tank shall be a low-profile design to maintain the lowest center of gravity feasible.

o The sprayer tank shall have a volume of 100 gal.

o Sprayer shall have a hose reel and hand spray wand.

o Sprayer shall have a boomless mount kit and SS Hypro XT nozzles, capable of

22-30 ft of spray coverage.

o The boomless sprayer shall be low profile and not extend beyond the width o-f the above-requested UTV when mounted and in use, and it should be easily removed/disconnected for removal and storage of entire unit.

o Sprayer shall be powered by a 12v electric pump capable of 7 gpm and up to 70 psi.

o Sprayer shall have manual TeeJet® shutoff and regulating valves, and a liquid-filled pressure gauge visible from the cab of the UTV.

o Sprayer shall have a control arm that allows access to manual controls from the UTV operator’s (driver’s) seat. Control arm shall be a design to allow easy entry and exit from the UTV.

o All fittings, hoses, diaphragms, valves, etc. shall be suitable for use with chemical herbicides.

o Tank shall have a remote drain to reduce chemical spills in the cargo bed.

2.3 Quote Evaluation Criteria

The Government shall award a contract resulting from this solicitation to the responsible contractor whose offer conforming to the solicitation shall be most advantageous to the Government, price and other factors considered.

Quote will initially be reviewed to insure all items listed above in the Quote Submission Package are included. Submissions found incomplete may be removed from further consideration.

The following factors shall be used to evaluate quotes:

Factor 1 – Technical Specifications of Apparatus

A. Technical specifications of UTV listed in salient characteristics and requested attachments.

B. Technical specifications of the transport trailer listed in salient characteristics.

C. Technical specifications of the sprayer listed in salient characteristics.

D. Adherence to above SOW, workmanship requirements, and capabilities and capacities.

Factor 2 – Service and Support

A. Warranty Provisions B. Service and Support Plan C. Replacement Parts Plan D. Service Center Locations

Factor 3 – Service and Support

A. Experience supplying vehicles for use in off-road conditions and trailers for transport of utility vehicles.

B. Ability to provide the vehicle, trailer and sprayer per the specification and time frames required within this specification.

C. Past performance can be based on the Contracting Officer’s knowledge, contractor provided reference and other reasonable sources.

2.4 Final Acceptance

Final acceptance shall be the responsibility of the Contracting Officer.

2.5 Delivery

The Government requires delivery of the finished vehicle and trailer 30 days from the contractor’s receipt of the order, F.O.B. USFWS facility. Any request for variance from the required delivery date shall be submitted with the quotation package.

Clauses

52.212-4 CONTRACT TERMS AND CONDITIONS –COMMERCIAL PRODUCTS AND

COMMERCIAL SERVICES (NOV 2023)

---Addendum to 52.212-4---

DIAR 1452.237-70 INFORMATION COLLECTION - DEPARTMENT OF THE INTERIOR (JUL

1996)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

Federal Acquisition Regulation: https://www.acquisition.gov/far Department of the Interior Acquisition Regulation: https://www.acquisition.gov/diar

(End of clause)

DOI-AAAP-0028 ELECTRONIC INVOICING AND PAYMENT REQUIREMENTS-INVOICE

PROCESSING PLATFORM (IPP) (FEB 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

'Payment request' means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is:

https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice:

PDF Vendor-created invoice

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone

(866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause) http://www.acquisition.gov/far http://www.acquisition.gov/diar http://www.ipp.gov/ mailto:IPPCustomerSupport@fiscal.treasury.gov

DOI-AAAP-0050 CONTRACTOR PERFORMANCE ASSESSMENT REPORTING SYSTEM (DEC

2015)

1) FAR 42.1502 directs all Federal agencies to collect past performance information on contracts. The Department of the Interior (DOI) has implemented the Contractor Performance Assessment Reporting System (CPARS) to comply with this regulation. One or more past performance evaluations will be conducted in order to record your contract performance as required by FAR 42.15.

2) The past performance evaluation process is a totally paperless process using CPARS. CPARS is a web-based system that allows for electronic processing of the performance evaluation report. Once the report is processed, it is available in the Past Performance Information Retrieval System (PPIRS) for Government use in evaluating past performance as part of a source selection action.

3) We request that you furnish the Contracting Officer (CO) with the name, position title, phone number, and email address for each person designated to have access to your firm's past performance evaluation(s) for the contract no later than 30 days after award. Each person granted access will have the ability to provide comments in the Contractor portion of the report and state whether or not the Contractor agrees with the evaluation, before returning the report to the Assessing Official (AO). Information in the report must be protected as source selection sensitive information not releasable to the public.

4) When your Contractor Representative(s) are registered in CPARS, they will receive an automatically generated email with detailed login instructions. Further details, systems requirements, and training information for CPARS is available at https://www.cpars.gov/.

5) Within 60 days after the end of a performance period, the AO will complete an interim or final past performance evaluation, and the report will be accessible at https://www.cpars.gov/.

a) Contractor Representatives may then provide comments in response to the evaluation, or return the evaluation without comment.

b) Your comments should focus on objective facts in the AO's narrative and should provide your views on the causes and ramifications of the assessed performance.

c) All information provided should be reviewed for accuracy prior to submission.

d) If you elect not to provide comments, please acknowledge receipt of the evaluation by indicating "No comment" in the space provided, and then selecting “Accept the Ratings and Close the Evaluation”.

e) Your response is due within 60 calendar days after receipt of the CPAR. On day 15, the evaluation will become available in PPIRS-RC marked as “Pending” with or without comments and whether or not it has been closed.

f) If you do not sign and submit the CPAR within 60 days, it will automatically be returned to the Government and will be annotated: "The report was delivered/received by the contractor on (date). The contractor neither signed nor offered comment in response to this assessment."

6) The following guidelines apply concerning your use of the past performance evaluation:

a) Protect the evaluation as source selection information. After review, transmit the evaluation by completing and submitting the form through CPARS. If for some reason you are unable to view and/or submit the form through CPARS, contact the CO for instructions.

b) Strictly control access to the evaluation within your organization. Ensure the evaluation is never released to persons or entities outside of your control.

c) Prohibit the use of or reference to evaluation data for advertising, promotional material, pre-award http://www.cpars.gov/ http://www.cpars.gov/ surveys, responsibility determinations, production readiness reviews, or other similar purposes.

7) If you wish to discuss a past performance evaluation, you should request a meeting in writing to the CO no later than seven days following your receipt of the evaluation. The meeting will be held in person or via telephone or other means during your 60-day review period.

8) A copy of the completed past performance evaluation will be available in CPARS for your viewing and for Government use supporting source selection actions after it has been finalized.

52.204-13 SYSTEM FOR AWARD MANAGEMENT MAINTENANCE (OCT 2018)

52.204-28 Federal Acquisition Supply Chain Security Act Orders—Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts (Dec 2023)

52.204-29 Federal Acquisition Supply Chain Security Act Orders—Representation and Disclosures

(Dec 2023)

52.204-30 Federal Acquisition Supply Chain Security Act Orders—Prohibition (Dec 2023)

52.217-2 CANCELLATION UNDER MULTI-YEAR CONTRACTS (OCT 1997)

52.223-2 AFFIRMATIVE PROCUREMENT OF BIOBASED PRODUCTS UNDER SERVICE AND

CONSTRUCTION CONTRACTS (SEP 2013)

52.223-17 AFFIRMATIVE PROCUREMENT OF EPA-DESIGNATED ITEMS IN SERVICE AND

CONSTRUCTION CONTRACTS (AUG 2018)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any Department of the Interior Acquisition Regulation (48 CFR Chapter 14) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive

Orders—Commercial Products and Commercial Services (Jan 2025) (DEVIATION FEB 2025)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

(1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or

Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further

Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or

Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91).

https://www.acquisition.gov/far/52.203-19#FAR_52_203_19 https://www.acquisition.gov/far/52.204-23#FAR_52_204_23

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance

Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232).

(4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) ( 31

U.S.C. 3903 and 10 U.S.C. 3801).

(6) 52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553).

(7) 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-

78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting

Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services:

[Contracting Officer check as appropriate.]

__ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun

2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

__ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)).

__ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of

2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American

Recovery and Reinvestment Act of 2009.)

__ (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) ( 41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community—see FAR 3.900(a).

_X_ (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun

2020) (Pub. L. 109-282) ( 31 U.S.C. 6101 note).

__ (6) [Reserved].

__ (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section

743 of Div. C).

__ (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct

2016) (Pub. L. 111-117, section 743 of Div. C).

_X_ (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of

Division R of Pub. L. 117-328).

_X_ (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders—Federal Supply

Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) ( Pub.

L. 115–390, title II).

_X_ (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders—Prohibition. (Dec

2023) ( Pub. L. 115–390, title II).

_X_ (ii) Alternate I (Dec 2023) of 52.204-30.

_X_ (12) 52.209-6, Protecting the Government's Interest When Subcontracting With Contractors

Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Jan 2025)

( 31 U.S.C. 6101 note).

https://www.acquisition.gov/far/52.204-25#FAR_52_204_25 https://www.acquisition.gov/far/52.209-10#FAR_52_209_10 https://www.acquisition.gov/far/52.232-40#FAR_52_232_40 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section3903&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section3801&num=0&edition=prelim https://www.acquisition.gov/far/52.233-3#FAR_52_233_3 https://www.acquisition.gov/far/52.233-4#FAR_52_233_4 https://www.acquisition.gov/far/52.203-6#FAR_52_203_6 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title10-section4655&num=0&edition=prelim https://www.acquisition.gov/far/52.203-13#FAR_52_203_13 https://www.acquisition.gov/far/52.203-15#FAR_52_203_15 https://www.acquisition.gov/far/52.203-17#FAR_52_203_17 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section4712&num=0&edition=prelim https://www.acquisition.gov/far/3.900#FAR_3_900 https://www.acquisition.gov/far/52.204-10#FAR_52_204_10 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title31-section6101&num=0&edition=prelim https://www.acquisition.gov/far/52.204-14#FAR_52_204_14 https://www.acquisition.gov/far/52.204-15#FAR_52_204_15 https://www.acquisition.gov/far/52.204-27#FAR_52_204_27 https://www.acquisition.gov/far/52.204-28#FAR_52_204_28 https://www.govinfo.gov/link/plaw/115/public/390 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.govinfo.gov/link/plaw/115/public/390 https://www.acquisition.gov/far/52.204-30#FAR_52_204_30 https://www.acquisition.gov/far/52.209-6#FAR_52_209_6 https://www.govinfo.gov/link/uscode/31/6101

__ (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct

2018) ( 41 U.S.C. 2313).

__ (14) [Reserved].

__ (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) ( 15 U.S.C. 657a).

__ (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct

2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ (17) [Reserved]

_X_ (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-6.

__ (19)

(i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644).

__ (ii) Alternate I (Mar 2020) of 52.219-7.

__ (20) 52.219-8, Utilization of Small Business Concerns (Jan 2025)( 15 U.S.C. 637(d)(2) and (3)).

__ (21) (i) 52.219-9, Small Business Subcontracting Plan (Jan 2025) ( 15 U.S.C. 637(d)(4)).

__ (ii) Alternate I (Nov 2016) of 52.219-9.

__ (iii) Alternate II (Nov 2016) of 52.219-9.

__ (iv) Alternate III (Jun 2020) of 52.219-9.

__ (v) Alternate IV (Jan 2025) of 52.219-9.

_X_ (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (Mar 2020) of 52.219-13.

_X_ (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 657s).

__ (24) 52.219-16, Liquidated Damages—Subcontracting Plan (Sep

2021) (15 U.S.C. 637(d)(4)(F)(i)).

__ (25) 52.219-27, Notice of Set-Aside for, or Sole-Source Award to, Service-Disabled Veteran-

Owned Small Business (SDVOSB) Concerns Eligible Under the SDVOSB Program (Feb 2024)

(15 U.S.C. 657f).

_X_ (26) (i) 52.219-28, Postaward Small Business Program Rerepresentation (Jan

2025) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (Mar 2020) of 52.219-28.

__ (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically

Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)).

__ (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business

Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022)

(15 U.S.C. 637(m)).

__ (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar

2020) ( 15 U.S.C. 644(r)).

https://www.acquisition.gov/far/52.209-9#FAR_52_209_9 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title41-section2313&num=0&edition=prelim https://www.acquisition.gov/far/52.219-3#FAR_52_219_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637a&num=0&edition=prelim https://www.acquisition.gov/far/52.219-4#FAR_52_219_4 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-6#FAR_52_219_6 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-7#FAR_52_219_7 https://www.acquisition.gov/far/52.219-8#FAR_52_219_8 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-9#FAR_52_219_9 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-13#FAR_52_219_13 https://www.acquisition.gov/far/52.219-14#FAR_52_219_14 https://www.acquisition.gov/far/52.219-16#FAR_52_219_16 https://www.acquisition.gov/far/52.219-27#FAR_52_219_27 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-28#FAR_52_219_28 https://www.acquisition.gov/far/52.219-29#FAR_52_219_29 https://www.acquisition.gov/far/52.219-30#FAR_52_219_30 https://www.acquisition.gov/far/52.219-32#FAR_52_219_32 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section644&num=0&edition=prelim

_X_ (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) ( 15 U.S.C. 637(a)(17)).

_X_ (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755).

_X_ (32) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Jan 2025)( E.O.

13126).

_X_ (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

_X_ (34) (i) 52.222-26, Equal Opportunity (Sep 2016) (E.O.11246).

__ (ii) Alternate I (Feb 1999) of 52.222-26.

__ (35) (i) 52.222-35, Equal Opportunity for Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (ii) Alternate I (Jul 2014) of 52.222-35.

_X_ (36) (i) 52.222-36, Equal Opportunity for Workers with Disabilities (Jun 2020) ( 29 U.S.C. 793).

__ (ii) Alternate I (Jul 2014) of 52.222-36.

__ (37) 52.222-37, Employment Reports on Veterans (Jun 2020) ( 38 U.S.C. 4212).

__ (38) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec

2010) (E.O. 13496).

_X_ (39) (i) 52.222-50, Combating Trafficking in Persons (Nov 2021) (22 U.S.C. chapter 78 and E.O.

13627).

__ (ii) Alternate I (Mar 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (40) 52.222-54, Employment Eligibility Verification (Jan 2025) ( Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (41) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA–Designated

Items (May 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

_X_ (42) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential

Hydrofluorocarbons (May 2024) ( 42 U.S.C. 7671, et seq.).

_X_ (43) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air

Conditioners (May 2024) ( 42 U.S.C. 7671, et seq.).

_X_ (44) 52.223-20, Aerosols (May 2024) ( 42 U.S.C. 7671, et seq.).

_X_ (45) 52.223-21, Foams (May 2024) ( 42 U.S.C. 7671, et seq.).

_X_ (46) 52.223-23, Sustainable Products and Services (May 2024) (DEVIATION FEB 2025) ( 7

U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

__ (47) (i) 52.224-3 Privacy Training (Jan 2017) ( 5 U.S.C. 552 a).

__ (ii) Alternate I (Jan 2017) of 52.224-3.

__ (48) (i) 52.225-1, Buy American-Supplies (Oct 2022) (41 U.S.C. chapter 83).

__ (ii) Alternate I (Oct 2022) of 52.225-1.

https://www.acquisition.gov/far/52.219-33#FAR_52_219_33 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title15-section637&num=0&edition=prelim https://www.acquisition.gov/far/52.222-3#FAR_52_222_3 https://www.acquisition.gov/far/52.222-19#FAR_52_222_19 https://www.federalregister.gov/executive-order/13126 https://www.federalregister.gov/executive-order/13126 https://www.acquisition.gov/far/52.222-21#FAR_52_222_21 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-26#FAR_52_222_26 https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-35#FAR_52_222_35 https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title29-section793&num=0&edition=prelim https://www.acquisition.gov/far/52.222-36#FAR_52_222_36 https://www.acquisition.gov/far/52.222-37#FAR_52_222_37 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title38-section4212&num=0&edition=prelim https://www.acquisition.gov/far/52.222-40#FAR_52_222_40 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 https://www.acquisition.gov/far/52.222-50#FAR_52_222_50 https://www.acquisition.gov/far/52.222-54#FAR_52_222_54 https://www.federalregister.gov/executive-order/12989 https://www.acquisition.gov/far/22.1803#FAR_22_1803 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 https://www.acquisition.gov/far/52.223-9#FAR_52_223_9 https://www.acquisition.gov/far/52.223-11#FAR_52_223_11 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-12#FAR_52_223_12 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-20#FAR_52_223_20 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-21#FAR_52_223_21 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.223-23#FAR_52_223_23 https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title7-section8102&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title7-section8102&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section6962&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section8259&num=0&edition=prelim https://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title42-section7671&num=0&edition=prelim https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 http://uscode.house.gov/view.xhtml?req=granuleid:USC-prelim-title5-section552&num=0&edition=prelim https://www.acquisition.gov/far/52.224-3#FAR_52_224_3 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1 https://www.acquisition.gov/far/52.225-1#FAR_52_225_1

_X_ (49) (i) 52.225-3, Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) ( 19

U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C.

chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

__ (ii) Alternate I [Reserved].

__ (iii) Alternate II (Jan 2025) of 52.225-3.

__ (iv) Alternate III (Feb 2024) of 52.225-3.

__ (v) Alternate IV (Oct 2022) of 52.225-3.

__ (50) 52.225-5, Trade Agreements (NOV 2023) ( 19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

_X_ (51) 52.225-13, Restrictions on Certain Foreign Purchases (Feb 2021) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct

2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10

U.S.C. Subtitle A, Part V, Subpart G Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov

2007) (42 U.S.C. 5150).

_X_ (55) 52.226-8, Encouraging Contractor Policies to Ban Text Messaging While

Driving (May 2024) ( E.O. 13513).

__ (56) 52.229-12, Tax on Certain Foreign Procurements (Feb 2021).

_X_ (57) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial

Services (Nov 2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

__ (58) 52.232-30, Installment Payments for Commercial Products and Commercial Services (Nov

2021) (41 U.S.C. 4505, 10 U.S.C. 3805).

_X_ (59) 52.232-33, Payment by Electronic…