Sol_140FF027Q0032.pdf

REQUEST FOR QUOTATION

(THIS IS NOT AN ORDER)

THIS RFQ IS IS NOT A SMALL BUSINESS SET-ASIDE

15. DATE OF QUOTATION

16. SIGNER

a. NAME (Type or print)

c. TITLE (Type or print)

b. TELEPHONE

AREA CODE

NUMBER

STANDARD FORM 18 (REV. 6/1995)

Prescribed by GSA-FAR (48 CFR) 53.215-1(a)

AUTHORIZED FOR LOCAL REPRODUCTION

Previous edition not usable

8. TO:

b. COMPANYa. NAME

c. STREET ADDRESS

d. CITY e. STATE f. ZIP CODE

9. DESTINATION

a. NAME OF CONSIGNEE

b. STREET ADDRESS

d. STATE e. ZIP CODE

7. DELIVERY

FOB DESTINATION

OTHER

(See Schedule)

10. PLEASE FURNISH QUOTATIONS TO THE

ISSUING OFFICE IN BLOCK 5a ON OR BEFORE CLOSE OF BUSINESS (Date)

IMPORTANT: This is a request for information and quotations furnished are not offers. If you are unable to quote, please so indicate on this form and return it to the address in Block 5a. This request does not commit the Government to pay any costs incurred in the preparation of the submission of this quotation or to contract for supplies or service. Supplies are of domestic origin unless otherwise indicated by quoter. Any representations and/or certifications attached to this Request for Quotation must be completed by the quoter.

11. SCHEDULE (Include applicable Federal, State and local taxes)

ITEM NUMBER

(a)

SUPPLIES/SERVICES

(b)

QUANTITY

(c)

UNIT

(d)

UNIT PRICE

(e)

AMOUNT

(f)

12. DISCOUNT FOR PROMPT PAYMENT

a. 10 CALENDAR DAYS (%) b. 20 CALENDAR DAYS (%) c. 30 CALENDAR DAYS (%) d. CALENDAR DAYS

NUMBER PERCENTAGE

NOTE: Additional provisions and representations are are not attached.

13. NAME AND ADDRESS OF QUOTER

a. NAME OF QUOTER

b. STREET ADDRESS

c. COUNTY

d. CITY e. STATE f. ZIP CODE

14. SIGNATURE OF PERSON AUTHORIZED TO

SIGN QUOTATION

PAGE OF PAGES

1. REQUEST NUMBER 2. DATE ISSUED 3. REQUISITION/PURCHASE REQUEST NUMBER 4. CERT. FOR NAT. DEF.

UNDER BDSA REG. 2

AND/OR DMS REG. 1

RATING

5a. ISSUED BY 6. DELIVER BY (Date)

NAME TELEPHONE NUMBER

AREA CODE NUMBER

c. CITY

5b. FOR INFORMATION CALL (NO COLLECT CALLS)

318 TOLL ROAD

FWS, SAT Team 1 5275 Leesburg Pike Falls Church VA 22041

0044059567140FF027Q0032

Marshall Richard

000-0000

FWS KOOSKIA NATIONAL FISH HATCHERY

83539-5190

10/28/2026

11/05/2026 1100 ES

01/29/2027

KOOSKIA

ID

Formalin Storage Building for Kooskia

00010 1 EAFormalin Storage Building

Delivery: 01/29/2027

1 12

This announcement constitutes the only solicitation; quotes are being requested and a separate written solicitation will not be issued. This solicitation is for the purchase of one (1) ) Outdoor Chemical Storage Locker, Model SBB1600SA, delivery, and installation. (or equivalent). This solicitation is for a Firm-Fixed-Price (FFP) purchase order. Award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method. To be considered for award, vendors must complete and submit the bid sheet in its entirety. This ensures that all quotes can be properly evaluated and compared against the Government's requirements. The NAICS Code is 332311 Prefabricated Metal Building and Component Manufacturing 750 employees.

To be considered technically acceptable, the quoted product must meet or exceed the following;

1. Must accommodate 16 standard 55-gallon drums.

2. Must provide a minimum sump capacity of 272 gallons.

3. Must have external dimensions of approximately 125" W 100" D 99" H.

4. Must have internal dimensions of approximately 114" W 90" D 87.5" H.

5. Must have a 60" W 80" H door with a 36" active door leaf.

6. Must have 12-gauge galvannealed steel exterior walls, 20-gauge interior walls, and a 3-inch airspace between the walls.

7. Must have UV- and chemical-resistant paint on the interior and exterior.

8. Must have a leak-tight, all-welded sump meeting applicable EPA and OSHA requirements.

9. Must be fully assembled and freestanding upon delivery.

10. Must meet applicable EPA, OSHA, NFPA 30, NFPA 1, FM Approval, SMaRT Certified Gold, ASTM, AISI, and AWS requirements specified in the solicitation.

11. Must include a lockable door with a UL Classified commercial-grade keyed lockset and a heavy-gauge aluminum threshold.

12. Must include natural draft ventilation and interior and exterior static grounding connectors.

13. Must include removable 13-inch-wide, 12-gauge galvanized steel floor planking.

14. Must include forklift channels and anchor plates for relocation and permanent mounting.

15. Must include an NFPA 704 Diamond decal and a DOT hazard placard holder.

16. Must be rated for wind resistance up to 90 mph.

17. Must include a pre-wired electrical system, insulation, heating systems, and explosion relief panels.

18. Must be delivered fully assembled to 318 Toll Road, Kooskia, Idaho 83539, within 3 to12 weeks of contract award.

19. Must provide shipment tracking, coordinate offloading with facility personnel, and comply with applicable DOT transportation requirements.

20. Must include product documentation, applicable certifications, warranty information, and post-delivery support.

21. Must meet the Government's requirements if an alternative model or configuration is proposed, subject to Government approval.

22. Must include the unit, required additional features, shipping, delivery, and offloading in the proposed price, with any exclusions clearly identified.

23. Delivery

Solicitation Questions Due: November 01, 2026. to Marshall Richard:

marshall_richard@ios.doi.gov

Quotes Due: November 05, 2026 at 1300 eastern time. E-Mail. Quote Submission to Marshall Richard: marshall_richard@ios.doi.gov.

This is a simplified acquisition for a commercial product any resulting purchase order will include the applicable Electronic Funds Transfer (EFT) clauses and require the use of the Invoice Processing Platform (IPP) for invoicing.

This procurement is a 100% Small Business Set-Aside. All applicable provisions and clauses included with this solicitation apply. Offerers must have an active registration in the System for Award Management (SAM) at the time of quote submission and remain registered through award. The Government will verify SAM registration during the evaluation process and again prior to award. The successful offerer must be actively registered and not excluded from doing business with the Federal Government. Please refer to the attached solicitation and submit a quote that meets the required salient characteristics. If you do not receive an e-mail response confirming that the government has received your quote within 24 hours after the closing date and time, please follow up with an e-mail to marshall_richard@ios.doi.gov.

mailto:marshall_richard@fws.gov mailto:marshall_richard@fws.gov

Bid sheet

1. Does the unit accommodate 16 standard 55-gallon drums, provide a minimum sump capacity of 272 gallons, and meet the specified external dimensions of 125" W × 100" D × 99" H and internal dimensions of 114" W × 90" D × 87.5" H?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

2. Does the unit include the specified 60" W × 80" H door with a 36" active door leaf, UL Classified commercial-grade keyed lockset, heavy-gauge aluminum threshold, 12-gauge galvannealed steel exterior walls, 20-gauge interior walls, 3-inch airspace, and UV- and chemical-resistant interior and exterior paint?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

3. Does the unit include a leak-tight, all-welded sump meeting applicable EPA and OSHA requirements, natural draft ventilation, interior and exterior static grounding connectors, removable 13-inch-wide, 12-gauge galvanized steel floor planking, forklift channels, anchor plates, an NFPA 704 Diamond decal, a DOT hazard placard holder, and wind resistance up to 90 mph?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

4. Does the unit meet the applicable EPA, OSHA, NFPA 30, NFPA 1, FM Approval, SMaRT Certified Gold, ASTM, AISI, and AWS requirements specified in the solicitation?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

5. Can the unit include the required pre-wired electrical system, insulation, lighting, heating/cooling systems, and explosion relief panels, as specified in the solicitation?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

6. Can the unit be delivered fully assembled and freestanding to 318 Toll Road, Kooskia, Idaho 83539, within 3–12 weeks of contract award?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

7. Will the contractor provide shipment tracking, coordinate offloading with facility personnel, and comply with applicable DOT transportation requirements?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

8. Will the contractor provide product documentation, applicable certifications, warranty information, and post-delivery support, with the proposed price including the unit, required additional features, shipping, delivery, and offloading?

☐ Yes ☐ No ☐ Exceeds Standard

If exceeding the standard, specify how: __________________________

Statement of Work (SOW)

Outdoor Chemical Storage Locker

1. Introduction

This Statement of Work (SOW) outlines the requirements, specifications, deliverables, and responsibilities associated with the procurement, delivery, and installation of one (1) Outdoor Chemical Storage Locker, Model SBB1600SA, (or equivalent) as described in the product documentation provided by USA Safety Solutions, Inc.

2. Scope of Work

The Contractor shall furnish all labor, materials, equipment, and services necessary to supply and deliver one fully assembled, compliant outdoor chemical storage locker. Work includes, but is not limited to:

• Manufacturing of locker per specifications

• Quality assurance and compliance certification

• Delivery to the designated Government facility

• Offloading and placement at the designated location

• Provision of documentation, warranty, and certification records

3. Product Requirements

The unit delivered shall meet or exceed the following specifications:

3.1 Capacity & Dimensions

• Storage Capacity: 16 x 55-gallon drums

• Sump Capacity: 272 gallons

• External Dimensions: 125" W x 100" D x 99" H

• Internal Dimensions (approx.): 114" W x 90" D x 87.5" H

• Door Dimensions: 60" W x 80" H with 36" active leaf

3.2 Construction Standards

• Heavy 12-gauge galvannealed steel exterior walls (non-combustible)

• 20-gauge interior walls with 3-inch airspace gap

• UV and chemical-resistant paint, interior and exterior

• Leak-tight, all-welded sump meeting EPA and OSHA secondary containment standards

• Fully assembled, freestanding structure

3.3 Compliance Requirements

The unit must comply with or be certified under:

• EPA regulations

• OSHA secondary containment requirements

• NFPA 30 and NFPA 1 standards

• FM Approval

• SMaRT Certified Gold Sustainable Manufacturing

• Manufactured per ASTM, AISI, AWS standards

4. Performance and Functional Requirements

The storage locker shall include the following features:

• Lockable door with UL Classified commercial-grade keyed lockset

• Heavy-gauge aluminum threshold

• Natural draft ventilation

• Static grounding connectors (interior and exterior)

• Removable 13-inch wide floor planking (12-gauge galvanized steel)

• Forklift channels for relocation

• Anchor plates for permanent mounting

• NFPA 704 Diamond decal and DOT hazard placard holder

• Wind resistance up to 90 mph (standard)

5. Optional Features (Required by Government)

The Government has elected to add these optional components:

• Pre-wired electrical systems

• Insulation

• Heating system

• Explosion relief panels

Any changes or additions must be coordinated with the Contracting Officer and priced accordingly by the Contractor.

6. Delivery Location and Requirements

• 318 Toll Road; Kooskia Idaho 83539

• Delivery Timeframe: 12-23 weeks from contract award date

• Unit must arrive fully assembled

• Contractor shall provide a tracking number upon shipment

• Offloading shall be coordinated with facility personnel

• Contractor responsible for safe transport in accordance with all DOT requirements

7. Government Furnished Information / Responsibilities

The Government will:

• Provide delivery location details

• Identify placement site and ensure site is prepared

• Provide access to authorized personnel for receiving activities

• Review and approve optional features if selected

8. Contractor Responsibilities

The Contractor shall:

• Ensure compliance with all technical and regulatory requirements

• Provide customer support for configuration and technical questions

• Supply all warranty and certification documentation upon delivery

• Provide point-of-contact information for post-delivery support

9. Acceptance Criteria

A Government representative will inspect and accept the unit based on:

• Compliance with all specifications in Section 3 and 4

• Absence of damage upon delivery

• Delivery of all required documentation

Failure to meet requirements may result in rejection and return at Contractor’s expense.

10. Points of Contact

• Kurt McCorkle, Contracting Officer Technical Representative (COTR); 208-400-0002;

kurt_mccorkle@fws.gov

• Kayla Warden, Kooskia NFH Manager; 208-935-8798; kayla_warden@fws.gov mailto:kurt_mccorkle@fws.gov

Page 3 of ##

C – Contract Clauses

DOI ELECTRONIC INVOICING Electronic Invoicing and Payment Requirements - Invoice Processing Platform (IPP) (February 2021)

Payment requests must be submitted electronically through the U. S. Department of the Treasury's Invoice Processing Platform System (IPP).

"Payment request" means any request for contract financing payment or invoice payment by the Contractor. To constitute a proper invoice, the payment request must comply with the requirements identified in the applicable Prompt Payment clause included in the contract, or the clause 52.212-4 Contract Terms and Conditions - Commercial Items included in commercial item contracts. The IPP website address is: https://www.ipp.gov.

Under this contract, the following documents are required to be submitted as an attachment to the IPP invoice [Contracting Officer to edit and include the documentation required under this contract]:

The Contractor must use the IPP website to register access and use IPP for submitting requests for payment. The Contractor Government Business Point of Contact (as listed in SAM) will receive enrollment instructions via email from the Federal Reserve Bank of St. Louis (FRBSTL) within 3 - 5 business days of the contract award date. Contractor assistance with enrollment can be obtained by contacting the IPP Production Helpdesk via email IPPCustomerSupport@fiscal.treasury.gov or phone (866) 973-3131.

If the Contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the Contractor must submit a waiver request in writing to the Contracting Officer with its proposal or quotation.

(End of Local Clause)

52.222-90 Addressing DEI Discrimination by Federal Contractors (DEVIATION MAR 2026)

(a) Definitions. As used in this clause—

Program participation means membership or participation in, or access or admission to: training, mentoring, or leadership development programs; educational opportunities; clubs; associations; or similar opportunities that are sponsored or established by the contractor or subcontractor.

Racially discriminatory diversity, equity, and inclusion (DEI) activities means disparate treatment based on race or ethnicity in the recruitment, employment (e.g., hiring, promotions), contracting (e.g., vendor agreements), program participation, or allocation or deployment of an entity's resources.

(b) In connection with the performance of work under this contract, the Contractor agrees as follows:

(1) The Contractor will not engage in any racially discriminatory DEI activities;

(2) The Contractor will furnish all information and reports, including providing access to books, records, and accounts, as required by the Contracting Officer, for purposes of ascertaining compliance with this clause;

(3) In the event of the Contractor's or a subcontractor's noncompliance with this clause, this contract may be canceled, terminated, or suspended in whole or in part, and the Contractor or subcontractor may be declared ineligible for further Government contracts;

(4) The Contractor will report any subcontractor's known or reasonably knowable conduct that may violate this clause to the Contracting Officer and take any appropriate remedial actions directed by the Contracting Officer; and

(5) The Contractor will inform the Contracting Officer if a subcontractor sues the Contractor and the suit puts at issue, in any way, the validity of this clause.

(6) The Contractor recognizes that compliance with the requirements of this clause are material to the Government's payment decisions for purposes of 31 U.S.C. 3729(b)(4).

Page 4 of ##

(c) The Contractor must include the substance of this clause, including this paragraph (c), in subcontracts at any tier, including those for commercial products and commercial services, except those where the place of delivery or performance is outside the United States.

(End of clause)

52.252-2 Clauses Incorporated by Reference. (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/diar https://www.acquisition.gov/far-overhaul

(End of clause)

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

52.203-6 Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655).

52.203-13 Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

52.203-17 Contractor Employee Whistleblower Rights (NOV 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community-see FAR 3.900(a).

52.204-9 Personal Identity Verification of Contractor Personnel. (JAN 2011)

52.204-13 System for Award Management Maintenance. (DEVIATION MAR 2026)

52.209-6 Protecting the Government's Interest When Subcontracting With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (DEVIATION MAY 2026) (31 U.S.C. 6101 note).

52.209-9 Updates of Publicly Available Information Regarding Responsibility Matters (DEVIATION MAY 2026) (41 U.S.C.

2313).

52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (DEVIATION MAY 2026)

52.212-4 Terms and Conditions - Commercial Products and Commercial Services. (DEVIATION MAR 2026)

52.219-4 Notice of Price Evaluation Preference for HUBZone Small Business Concerns (DEVIATION JAN 2026) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

52.219-6 Notice of Total Small Business Set-Aside (DEVIATION JAN 2026) (15 U.S.C. 644).

52.219-8 Utilization of Small Business Concerns (DEVIATION JAN 2026) (15 U.S.C. 637(d)(2) and (3)).

52.219-9 Small Business Subcontracting Plan (DEVIATION FEB 2026) (15 U.S.C. 637(d)(4)).

52.219-14 Limitations on Subcontracting (DEVIATION JAN 2026) (15 U.S.C. 657s).

52.219-16 Liquidated Damages- Subcontracting Plan (DEVIATION JAN 2026) (15 U.S.C. 637(d)(4)(F)(i)).

52.219-33 Nonmanufacturer Rule (DEVIATION JAN 2026) (15 U.S.C. 637(a)(17)).

52.222-3 Convict Labor (JUN 2003) (E.O. 11755).

52.222-19 Child Labor-Cooperation with Authorities and Remedies (DEVIATION MAY 2026) (E.O. 13126).

52.222-35 Equal Opportunity for Veterans (DEVIATION MAY 2026) (38 U.S.C. 4212).

Page 5 of ##

52.222-36 Equal Opportunity for Workers with Disabilities (DEVIATION MAY 2026) (29 U.S.C. 793).

52.222-37 Employment Reports on Veterans (DEVIATION MAY 2026) (38 U.S.C. 4212).

52.222-50 Combating Trafficking in Persons (DEVIATION MAY 2026) (22 U.S.C. chapter 78 and E.O. 13627).

52.222-54 Employment Eligibility Verification (DEVIATION MAY 2026) (Executive Order 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) (42 U.S.C.

6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

52.223-23 Sustainable Products (DEVIATION MAY 2026) (E.O. 14057, 7 U.S.C. 8102, 42 U.S.C. 6962, 42 U.S.C. 8259b, and 42 U.S.C. 7671l).

52.224-3 Privacy Training (JAN 2017) (5 U.S.C. 552a).

52.225-1 Buy American- Supplies (OCT 2022)) (41 U.S.C. chapter 83).

52.225-3 Buy American-Free Trade Agreements-Israeli Trade Act (NOV 2023) (19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, 19 U.S.C. chapter 29 (sections 4501-4732), Public Law 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43.

52.225-5 Trade Agreements (NOV 2023) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

52.232-29 Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C.4505, 10 U.S.C. 3805).

52.232-30 Installment Payments for Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C.

3805).

52.232-33 Payment by Electronic Funds Transfer-System for Award Management (OCT 2018) (31 U.S.C. 3332).

52.232-34 Payment by Electronic Funds Transfer-Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

52.232-36 Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

52.233-3 Protest After Award (AUG 1996) (31 U.S.C. 3553).

52.233-4 Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)).

52.240-91 Security Prohibitions and Exclusions (DEVIATION MAR 2026)

Page 6 of ##

D – Solicitation Provisions

52.212-2 Evaluation - Commercial Products and Commercial Services. (DEVIATION MAR 2026)

(a) The Government will award a contract resulting from this solicitation to the proposer responsible whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers:

• Technical experience, capacity, and expertise to perform the required tasks within the period of performance and to meet all goals and objectives on schedule. Demonstrated experience with the listed items, specifically within the size, location, and proximity of the current requirement.

• Technical approach to performing the required tasks as described in the statement of work addendum within the period of performance. The proposal shall include a narrative explaining how the work will be carried out in terms of the techniques, procedures, and schedule.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

52.252-1 Solicitation Provisions Incorporated by Reference. (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/far https://www.acquisition.gov/diar https://www.acquisition.gov/far-overhaul

(End of provision)

52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions (SEP 2024)

52.204-7 System for Award Management (DEVIATION MAR 2026)

Marshall Richard Cross-Out

Page 7 of ##

52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (DEVIATION MAR 2026)

52.222-18 Certification Regarding Knowledge of Child Labor for Listed End Products (FEB 2021)

52.240-90 Security Prohibitions and Exclusions Representations and Certifications (DEVIATION MAR 2026)

Title

Blank Page