Sol_1305M225Q0108.pdf

COMBINED SYNOPSIS/SOLICITATION

ANNUAL FUME HOOD CERTIFICATION FOR NOAA HOLLINGS MARINE LABORATORY IN CHARLESTON, SC.

(I) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice and in accordance with the simplified acquisition procedures authorized in FAR Part 13. This announcement constitutes the only solicitation;

quotes are being requested and no other written solicitation will be issued.

(II) This solicitation is issued as a request for quotation (RFQ). Submit written quotes on RFQ Number 1305M225Q0108.

(III) The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-03 (JAN 2025)

(IV) This solicitation is being issued as a total small business set-aside. The associated NAICS code is 811210.

The small business size standard is $34.0M.

(V) This combined solicitation/synopsis is for the following commercial services:

Line Item 0001 – Base Year; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, in accordance with the attached, incorporated Statement of Work. The period of performance is 12 months.

Line Item 1001 – Option Year 1; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, in accordance with the attached, incorporated Statement of Work. The period of performance is 12 months.

Line Item 2001 – Option Year 2; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, in accordance with the attached, incorporated Statement of Work. The period of performance is 12 months.

Line Item 3001 – Option Year 3; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, in accordance with the attached, incorporated Statement of Work. The period of performance is 12 months.

Line Item 4001 – Option Year 4; Services, non-personal, to provide all labor, equipment and materials (unless otherwise provided herein) necessary for annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, in accordance with the attached, incorporated Statement of Work. The period of performance is 12 months.

(VI) Description of requirements is as follows:

See attached Statement of Work which applies to the line items in Section (V) for the Base Year and all Option Years. Wage Determination # 2015-4427 Revision 29 is applicable and may be viewed at www.SAM.gov.

Offerors’ quote must provide separate line item pricing for the base and all option years.

http://www.sam.gov/

(VII) Place of Performance: Hollings Marine Laboratory, 331 Fort Johnson Rd, Charleston, SC 29412

Period of Performance shall be:

Base Year: Twelve (12) Months, June 1, 2025 – May 31, 2026

Option Year 1: Twelve (12) Months, June 1, 2026 – May 31, 2027

Option Year 2: Twelve (12) Months, June 1, 2027 – May 31, 2028

Option Year 2: Twelve (12) Months, June 1, 2028 – May 31, 2029

Option Year 2: Twelve (12) Months, June 1, 2029 – May 31, 2030

(XIII) Defense Priorities and Allocations System (DPAS) and assigned rating does not apply.

(XIV) Quotes are required to be received in the contracting office no later than 5:00 P.M. MDT/MST on May 9, 2025. All quotes must be emailed to the attention of Michelle Walton. The email address is michelle.walton@noaa.gov

(X) Any questions regarding this solicitation should be directed to Michelle Walton, phone: 757-605-7411, email:

michelle.walton@noaa.gov

UTILIZATION OF FEDCONNECT® FOR CONTRACT ADMINISTRATION

The Department of Commerce will utilize the FedConnect® web portal in administering this award. The contractor must be registered in FedConnect® and have access to the FedConnect® website located at https://www.fedconnect.net/Fedconnect/. For assistance in registering or for other FedConnect® questions please call the FedConnect® Help Desk at (800) 899-6665 or email at support@fedconnect.net.

There is no charge for registration in or use of FedConnect®.

(End)

Site Visit: Hollings Marine Laboratory, 331 Fort Johnson Rd, Charleston, SC 29412 Point of Contact: Vendors must contact Eric Skinner at 240-530-0288 or email: eric.skinner@noaa.gov to make site visit appointments.

All Offerors are strongly encouraged to make a site visit to inspect all proposed work and to acquire all necessary site information to properly prepare their Quote. Failure of the Offeror to visit the site and acquire all necessary site information to properly prepare the quote shall not be acceptable cause to justify a later request for additional costs after Contract Award. Any questions that come up at the site visit must be provided to Michelle Walton via email at michelle.walton@noaa.gov no later than May 7, 2025 at 12:00 P.M. MDT/MST. No questions will be answered on site.

mailto:michelle.walton@noaa.gov

Statement of Work Fume Hood/Safety Cabinet Annual Recertification

Hollings Marine Laboratory (HML)

The Hollings Marine Labs, 331 Fort Johnson Rd, Charleston, SC 29412 has requirements for the Annual recertification of eight different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets.

SITE VISIT

All vendors interested in submitting a quote are encouraged to attend a site visit at Hollings Marine Laboratory, 331 Fort Johnson Rd Charleston, SC 29412. During the site visit, prospective vendors will have the opportunity to review existing site conditions. If you wish to attend the site visit, please contact the following Government Point of Contact below to make site visit appointments. Appointments must be made at least 48 hours prior to the site visit to ensure access to the facility.

Eric Skinner Ph: 240-530-0288 Email: eric.skinner@noaa.gov

SCOPE

The objective of this service is to provide technical services to perform the testing and recertification according ANSI/AIHA Z9.5 requirements on the following (85) Hoods/Safety Cabinets that are listed in the deliverables below. All inspections and certifications are to be performed during a 1-week time period in the month of June on a yearly basis.

Requirements:

1. The contractor shall be competent, experienced, trained and knowledgeable in the Inspection and recertification of eight (8) different types of Fume Hood/Safety Cabinets utilizing the ANSI/AIHA Z9.5 requirements.

2. The contractor shall guarantee all work and agree to remedy, at its own expense, any defects caused by poor workmanship or materials.

3. The contractor shall perform the required inspection and recertification with factory trained, skilled, professional technicians, which are familiar with the required inspection and certification procedures.

Deliverables:

The contractor shall provide the equipment, inspection and recertification on all of the listed equipment in the deliverables on an annual basis before expiration of certifications. All testing shall be done once a year at each of the HML location in accordance with the following Standards:

a) Chemical Fume Hoods ANSI/AIHA Z9.5 Fume Hood - Test, AIHA/ANSI Z9.5: Per AIHA/ANZI Z9.5. Includes Airflow Velocity Measurements and Smoke Visualization. 4' and 6' Hoods

b) Biosafety Cabinet Test: Class II Biological Safety Cabinet Per NSF49. Includes Airflow Velocity Measurement and Leak Test. BSC

c) Clean Bench, Laminar Flow Unit Test: Per, manufacturer specification, or IEST RP 2.4.

Includes Airflow Velocity Measurements and Leak test.

d) Glove Box, Isolator Test: Per manufacturer specification. Includes Airflow Velocity Measurements and Leak Test.

e) Class I Single Pass Test: Per Manufacturer specification. Includes Airflow

Velocity Measurements, Leak Test and Smoke Visualization. Fume Hood with HEPA Filters

f) Low Flow Fume Hood Test: Per Client Specification. Includes Airflow Velocity Measurements and Smoke Visualization.

Type of Hoods HML Location Qty

Chemical Fume Hoods 51 Biological Safety Cabinets 08 Laminar – Clean Benches 09 Glove Box Cabinets 03 Chemical Fume Hood with HEPA Filters 08 BSC with Exhaust HEPA Filter (Bag in Bag Out – Roof)

Chemical Fume Hood 6’ 01 Low Flow Chemical Fume Hoods 05

Period of Performance:

The period of performance for this contract will include a one-year base period with four one-year option periods. June 1, 2025 - May 31, 2030

Base Year: June 1, 2025 - May 31, 2026 Option Year 1: June 1, 2026 - May 31, 2027 Option Year 2: June 1, 2027 - May 31, 2028 Option Year 3: June 1, 2028 - May 31 2029 Option Year 4: June 1, 2029 – May 31, 2030

Location:

Hollings Marine Laboratory (HML) 331 Fort Johnson Rd Charleston, SC 29412

Guarantee of Work

Contractor shall guarantee all work and agree to remedy, at its own expense, any defects caused by poor workmanship or materials.

Qualifications:

All work performed under this contract shall be performed by a licensed contractor who is able to do business in the state of South Carolina. The Contractor shall guarantee all work and agree to remedy at its own expense any defects caused by poor workmanship or materials. Work must be completed observing all federal, state, and local laws and regulations. The Contractor shall perform work in a manner that conforms to all appropriate Environmental Management Programs and Operational Controls identified by the agency, organizational, or facility EMS, and provide monitoring and measurement information as necessary for the organization to address environmental performance relative to the environmental, energy, and transportation management goals. In the event an environmental nonconformance or noncompliance associated with the contracted services is identified, the contractor shall take corrective and/or preventative actions. In the case of a noncompliance, the Contractor shall respond and take corrective action immediately. In the case of a nonconformance, the Contractor shall respond and take corrective action based on the time schedule established by the EMS Site Coordinator. In addition, the Contractor shall ensure that their employees are aware of the roles and responsibilities identified by the environmental management system and how these requirements affect their work performed under this contract.

Security/Safety/Environmental Considerations

Work must be completed observing all federal, state, and local laws and regulations. In order to comply with the Debt Collection Improvement Act of 1966, all contractors must be registered in System for Award Management (SAM) to be considered for an award of a federal contract. For information regarding registration in SAM website at http://www.SAM.gov

Conformance with Environmental Management Systems The Contractor shall perform work under this contract consistent with the relevant policy and objectives identified in the agency, organizational, or facility environmental management system (EMS) applicable for your contract. The Contractor shall perform work in a manner that conforms to all appropriate Environmental Management Programs and Operational Controls identified by the agency, organizational, or facility EMS, and provide monitoring and measurement information as necessary for the organization to address environmental performance relative to the environmental, energy, and transportation management goals. In the event an environmental nonconformance or noncompliance associated with the contracted services is identified, the contractor shall take corrective and/or preventative actions. In the case of a noncompliance, the Contractor shall respond and take corrective action immediately. In the case of a nonconformance, the Contractor shall respond and take corrective action based on the time schedule established by the EMS Site Coordinator. In addition, the Contractor shall ensure that their employees are aware of the roles and responsibilities identified by the environmental management system and how these requirements affect their work performed under this contract.

1) The Contractor shall register at front desk and receive a temporary pass for one day (if needed a door pass card will be provided)

2) The front desk personnel will have the contractor read a brief statement concerning the EMS, the Facility Engineer or designated maintenance staff member will convey to the contractor any other items that need to be done to protect HML and the environment issues we have.

WOMEN-OWNED SMALL

BUSINESS (WOSB)

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES

1. REQUISITION NUMBER PAGE 1 OF

2. CONTRACT NUMBER 3.AWARD/EFFECTIVE

DATE

4. ORDER NUMBER 5. SOLICITATION NUMBER 6. SOLICITATION ISSUE

DATE

7. FOR SOLICITATION

INFORMATION CALL:

a. NAME b. TELEPHONE NUMBER (No collect calls)

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY

13b. RATING

14. METHOD OF SOLICITATION

CODE

15. DELIVER TO 16. ADMINISTERED BY CODE

18a. PAYMENT WILL BE MADE BY CODE17a. CONTRACTOR/

OFFEROR

CODE

FACILITY

CODE

CODE

TELEPHONE NUMBER

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

REQUEST

FOR QUOTE

(RFQ)

INVITATION

FOR BID

(IFB)

REQUEST

FOR

PROPOSAL

(RFP)

SEE ADDENDUM

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Government Use Only)

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN 29. AWARD OF CONTRACT: REFERENCE

. YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR

30b. NAME AND TITLE OF SIGNER (Type or print) 30c. DATE SIGNED

31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

31b. NAME OF CONTRACTING OFFICER (Type or print) 31c. DATE SIGNED

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

STANDARD FORM 1449 (REV. 11/2021)

Prescribed by GSA - FAR (48 CFR) 53.212

10. THIS ACQUISITION IS UNRESTRICTED OR

NORTH AMERICAN

INDUSTRY CLASSIFICATION

STANDARD (NAICS):

SIZE STANDARD:

13a. THIS CONTRACT IS A

RATED ORDER UNDER

THE DEFENSE PRIORITIES

AND ALLOCATIONS

SYSTEM - DPAS (15 CFR 700)

SET ASIDE: % FOR:

11. DELIVERY FOR FREE ON

BOARD (FOB) DESTINATION

UNLESS BLOCK IS MARKED

SEE SCHEDULE

12. DISCOUNT TERMS

ARE ARE NOT ATTACHED

ARE ARE NOT ATTACHED

27a. SOLICITATION INCORPORATES BY REFERENCE (FEDERAL ACQUISITION REGULATION) FAR 52.212-1, 52.212-4.

FAR 52.212-3 AND 52.212-5 ARE ATTACHED.

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED.

8(A)

ECONOMICALLY

DISADVANTAGED

WOMEN-OWNED SMALL

BUSINESS (EDWOSB)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

(SDVOSB)

HUBZONE SMALL

BUSINESS

SMALL BUSINESS

NOTE: OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30.

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH

AND DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND

ON ANY ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS

SPECIFIED

DATED.

OFFER

ADDENDA

ADDENDA

1305M225Q0108

See Schedule See Schedule

EAD-SAP

FED BLDG 200 GRANBY ST SUITE 815

NORFOLK VA 23510

05/09/2025 1700 MD

MICHELLE WALTON

757-605-7411

EAD-SAP 100.00

MICHELLE WALTON

811210

$34

04/28/2025

NS4000HM

ADMINISTERED BY:

FED BLDG 200 GRANBY ST SUITE 815

NORFOLK VA 23510 USA

DELIVER TO:

US DEPT OF COMMERCE/NOAA

Continued...

STOCK RECORD (S/R)

STANDARD FORM 1449 (REV. 11/2021) BACK

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

32a. QUANTITY IN COLUMN 21 HAS BEEN

RECEIVED INSPECTED AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42a. RECEIVED BY (Print)

42b. RECEIVED AT (Location)

42c. DATE RECEIVED (MM/DD/YYYY) 42d. TOTAL CONTAINERS

40. PAID BY

32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. EMAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

PARTIAL FINAL

37. CHECK NUMBER

38. S/R ACCOUNT NUMBER 39. S/R VOUCHER NUMBER

36. PAYMENT

COMPLETE PARTIAL FINAL

ACCEPTED,

NOS HOLLINGS MARINE LAB

331 FT. JOHNSON RD

CHARLESTON SC 29412 USA

1305M225Q0108 BASE

Section II - Supplies or Services and Price/Costs Section IX - Contract Clauses Section X - List of Attachments

Section II - Supplies or Services and Price/Costs

CLIN List

Item Number Description Quantity Unit Unit Price Amount

BASE YEAR

SERVICES, NON-PERSONAL, TO PROVIDE ALL

EQUIPMENT, LABOR, AND MATERIALS

(UNLESS OTHERWISE PROVIDED HEREIN)

NECESSARY FOR: annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, See attached, incorporated Statement of Work for exact detail and list of hood types and quantities.

Award Type: Firm-fixed-price Product/Service Code: H342 Period of Performance: 06/01/2025 to 05/31/2026

OPTION YEAR 1

SERVICES, NON-PERSONAL, TO PROVIDE ALL

EQUIPMENT, LABOR, AND MATERIALS

(UNLESS OTHERWISE PROVIDED HEREIN)

NECESSARY FOR: annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, See attached, incorporated Statement of Work for exact detail and list of hood types and quantities.

Award Type: Firm-fixed-price

(Option Line Item)

Product/Service Code: H342 Period of Performance: 06/01/2026 to 05/31/2027

OPTION YEAR 2

SERVICES, NON-PERSONAL, TO PROVIDE ALL

EQUIPMENT, LABOR, AND MATERIALS

(UNLESS OTHERWISE PROVIDED HEREIN)

NECESSARY FOR: annual recertification of

Item Number Description Quantity Unit Unit Price Amount eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, See attached, incorporated Statement of Work for exact detail and list of hood types and quantities.

Award Type: Firm-fixed-price

(Option Line Item)

Product/Service Code: H342 Period of Performance: 06/01/2027 to 05/31/2028

OPTION YEAR 3

SERVICES, NON-PERSONAL, TO PROVIDE ALL

EQUIPMENT, LABOR, AND MATERIALS

(UNLESS OTHERWISE PROVIDED HEREIN)

NECESSARY FOR: annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, See attached, incorporated Statement of Work for exact detail and list of hood types and quantities.

Award Type: Firm-fixed-price

(Option Line Item)

Product/Service Code: H342 Period of Performance: 06/01/2028 to 05/31/2029

OPTION YEAR 4

SERVICES, NON-PERSONAL, TO PROVIDE ALL

EQUIPMENT, LABOR, AND MATERIALS

(UNLESS OTHERWISE PROVIDED HEREIN)

NECESSARY FOR: annual recertification of eight (8) different types of Fume Hood/Safety Cabinets for a total of eighty-five (85) Fume Hoods/Safety Cabinets at the Hollings Marine Lab located in Charleston, SC, See attached, incorporated Statement of Work for exact detail and list of hood types and quantities.

Item Number Description Quantity Unit Unit Price Amount

Award Type: Firm-fixed-price

(Option Line Item)

Product/Service Code: H342 Period of Performance: 06/01/2029 to 05/31/2030

Section IX - Contract Clauses

Clauses Incorporated by Reference Clause Number Clause Title

52.204-7 System for Award Management. (NOV 2024)

52.204-9 Personal Identity Verification of Contractor Personnel.

(JAN 2011)

52.204-13 System for Award Management Maintenance. (OCT 2018)

52.204-16 Commercial and Government Entity Code Reporting.

(AUG 2020)

52.204-17 Ownership or Control of Offeror. (AUG 2020)

52.204-18 Commercial and Government Entity Code Maintenance.

(AUG 2020)

52.204-20 Predecessor of Offeror. (AUG 2020)

52.204-29 Federal Acquisition Supply Chain Security Act Orders- Representation and Disclosures. (DEC 2023)

52.209-2 Prohibition on Contracting With Inverted Domestic Corporations-Representation. (NOV 2015)

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law. (FEB 2016)

52.212-4 Contract Terms and Conditions - Commercial Products and Commercial Services. (NOV 2023)

52.217-5 Evaluation of Options. (JUL 1990)

52.237-2 Protection of Government Buildings, Equipment, and Vegetation. (APR 1984)

1352.201-70 Contracting Officer's Authority. (MAR 2010) 1352.209-73 Compliance with the laws. (APR 2010) 1352.209-74 Organizational conflict of interest. (APR 2010)

1 UTILIZATION OF FEDCONNECT® FOR CONTRACT ADMINISTRATION

The Department of Commerce will utilize the FedConnect® web portal in administering this award. The contractor must be registered in FedConnect® and have access to the FedConnect® website located at https://www.fedconnect.net/Fedconnect/. For assistance in registering or for other FedConnect® questions please call the FedConnect® Help Desk at (800) 899-6665 or email at support@fedconnect.net. There is no charge for registration in or use of FedConnect®.

(End)

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services (Sep 2023)

NOTICE TO OFFERORS: Instructions for submitting quotations under this request for quote must be followed. Failure to provide all information to aid in the evaluation may be considered non-responsive.

Offers that are non-responsive may be excluded from further evaluation and rejected without further notification to the offeror.

The offeror will submit a quote for the items in section (V) as listed in the attached Statement of Work.

1. Submit PDF or Microsoft Word format quotations to the office specified in this solicitation at or before the time specified in the solicitation. Email quotes are required and can be sent to michelle.walton@noaa.gov.

2. Offeror shall have an active registration in the System for Award Management (SAM found at https://sam.gov/content/home) in order to provide a quote and be eligible for award. Must provide their UEI #/CAGE CODE with their quote.

3. Provide all evaluation criteria in accordance with FAR 52.212-2 in this package. Offerors who do not provide all evaluation criteria will not be accepted.

4. Offerors shall assume that the Government has no prior knowledge of them or their capability.

5. Quote shall include at least two references for similar services including the phone number, full address, and e-mail address. References will be checked. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the offeror, the agency’s knowledge of contractor performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services.

The following minimum information shall be provided within contractor submitted references:

• Contract Number/Order Number

• Date of Contract Award

• Name and Address of the Government Agency or Commercial Entity

• Contract Type

• Annual Contract Cost

• Period of Performance

• Description of Work

• Valid name, phone number and e-mail address of Contracting Officer, Contracting Officer’s Representative or Prime Contractor (if company was subcontracted).

• In the description of work, quotes should provide a detailed explanation demonstrating the similarity of the contract, in terms of scope and size to the requirements of the solicitation for purposes of the relevancy review. Additionally, offerors should provide a brief description of work performed and results achieved; description of the methodology, tools, and processes utilized.

In addition to the information requested above, offerors shall complete Blocks 1 through 4 on Page 1 of the Past Performance Questionnaire. The offeror is required to send the Past Performance Questionnaire to those Government and commercial activities provided by the offeror in their submission and e-mail the completed survey form directly to Michelle Walton at michelle.walton@noaa.gov by the DUE DATE OF THIS SOLICITATION.

The Government reserves the right to consider past performance report forms received after the due date of the solicitation and to contact references for verification or additional information. Offerors are cautioned that the Government reserves the right to obtain information for use in the evaluation of past performance from any sources including sources outside of the Government. The Government may obtain whatever information it deems most relevant to the required effort by telephonic and/or written inquiry. This information may include SAM.gov information or past performance information from any mailto:michelle.walton@noaa.gov https://sam.gov/content/home source.

6. If proposed subcontractor past performance is provided as part of the two (2) of its most relevant contracts or efforts and type of work to be done by the subcontractor on the solicitation requirement must be stated. The offeror’s submittal shall clearly detail the aspects of the work in the solicitation that the subcontractor is proposed to perform. A Past Performance example which does not clearly detail the aspects of the work in the solicitation that the subcontractor is proposed to perform will not be evaluated.

If the prime offeror or intended subcontractor/partner submits a past performance example in which it served as a subcontractor, the prime/sub/partner shall clearly detail the work that it performed and the size (dollar value) of that subcontracted work only. A Past Performance example that does not differentiate between the overall contract effort and the subcontractor effort will not be evaluated.

Subcontractor performance (either the offeror's own subcontractor experience or proposed subcontractor’s experience) of major or critical aspects of this requirement will be considered the same as prime contractor past performance information for the vendor. Failure of offerors to provide the required information and level of specificity will result in the contract reference not being evaluated.

“THE GOVERNMENT DOES NOT ACCEPT RESPONSIBILITY FOR NON-RECEIPT OF QUOTES. IT IS THE OFFEROR’S RESPONSIBILITY TO REQUEST AND RECEIVE A CONFIRMATION OF THE QUOTE RECEIPT”.

52.212-2 Evaluation- Commercial Products and Commercial Services (Nov 2021)

Offers will be evaluated based on price and the factors set forth in paragraph (a). The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered.

The evaluation will consider the Non-Price Technical Solution (Technical Approach and Past Performance) to be significantly more important than price. However, as quotes are determined to be more equal in the non-price evaluation factor, price becomes more important and may become the determining factor for award. If, at any stage of the evaluation, all offerors are determined to have submitted equal, or virtually equal, Non-Price Technical Solutions, price could become the factor in determining which offeror will receive the award.

The Government intends to evaluate the quotes and award a purchase order based on the Offeror’s initial quote; therefore, the Offeror’s initial quote should contain the Offeror’s best terms from a Non- Price Technical Solution and price standpoint.

The Government reserves the right not to award a purchase order depending on the quality of the quote(s) submitted and the availability of funds. Furthermore, the Government may waive informalities and minor irregularities or omissions in quotes received.

The Government may make award to other than the lowest-priced Offeror or the Offeror with the highest technical rating if the Contracting Officer determines that to do so would result in the best value to the Government. The Government will not make an award at a significantly higher overall price to achieve only slightly superior performance capability.

Paragraph (a) is hereby completed as follows: Evaluation factors are listed in order of importance and all factors are more important than price.

1. Technical Approach and Capability.

The offeror’s overall technical approach will be evaluated to assess the Government's level of confidence in the offeror’s understanding of, approach to, and ability to successfully perform the requirements as described in the Statement of Work. Provide a detailed description of the company’s experience performing similar services. A detailed technical approach write-up describing how the offeror will perform this service is required to be submitted with the quote regardless of whether a site visit was made or not. The technical approach write-up must not be a reiteration of the Statement of Work but how your company plans on performing the tasks listed in the attached Statement of Work.

i.e. performance checklists, anticipated number of janitors, anticipated hours at the facility and/or confirmation of supplies being provided, etc. Offerors must be experienced, trained and certified in ANSI/ AIHA Z9.5 requirements. Proof of certification must be submitted with quotes.

2. Past Performance. The offeror's past performance on related contracts will be evaluated to determine, as appropriate, successful performance of contract requirements, quality and timeliness of delivery of goods and services, cost management, communications between contracting parties, proactive management and customer satisfaction. The Government will use its discretion to determine the sources of past performance information used in the evaluation, and the information may be obtained from references provided by the offeror, the agency’s knowledge of offeror performance, other government agencies or commercial entities, or past performance databases, and will be based on responsiveness, quality, and customer services. Quote shall include at least two references for similar services including the phone number, full address, and e-mail address.

Offerors lacking relevant past performance history, or for whom past performance information is either not available or has not been submitted to the Government, will receive a neutral rating for past performance.

3. Price

The Government will evaluate the price quote for completeness and reasonableness in relation to the RFQ requirements. Quoted prices must be entirely compatible with the Non-Price Technical Solution.

The Government intends to award a trade-off, single, firm fixed-price purchase order on an all or some basis with payment terms of Net 30.

(b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s).

(c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer’s specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.

(End of provision)

CAM 1352.215-72 INQUIRIES (APR 2010)

OFFERORS MUST SUBMIT ALL QUESTIONS CONCERNING THIS SOLICITATION IN WRITING VIA EMAIL TO

MICHELLE.WALTON@NOAA.GOV. QUESTIONS SHOULD BE RECEIVED NO LATER THAN 12:00 P.M.

MDT/MST, 05/07/2025. Any responses to questions will be made in writing, without identification of the questioner, and will be included in an amendment to the solicitation. Even if provided in other form, only the question responses included in the amendment to the solicitation will govern performance of the contract.

(End of clause)

FAR 52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services (MAY 2024)(DEVIATION FEB 2025)

The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v) of this provision.

(a) Definitions. As used in this provision— Covered telecommunications equipment or services has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business eligible under the WOSB Program.

Forced or indentured child labor means all work or service—

(1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or

(2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties.

Highest-level owner means the entity that owns or controls an immediate owner of the offeror, or that owns or controls one or more entities that control an immediate owner of the offeror. No entity owns or exercises control of the highest level owner.

Immediate owner means an entity, other than the offeror, that has direct control of the offeror.

Indicators of control include, but are not limited to, one or more of the following: ownership or interlocking management, identity of interests among family members, shared facilities and equipment, and the common use of employees.

Inverted domestic corporation, means a foreign incorporated entity that meets the definition of an inverted domestic corporation under 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c).

Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—

(1) PSC 5510, Lumber and Related Basic Wood Materials;

(2) Product or Service Group (PSG) 87, Agricultural Supplies;

(3) PSG 88, Live Animals;

(4) PSG 89, Subsistence;

(5) PSC 9410, Crude Grades of Plant Materials;

(6) PSC 9430, Miscellaneous Crude Animal Products, Inedible;

(7) PSC 9440, Miscellaneous Crude Agricultural and Forestry Products;

(8) PSC 9610, Ores;

(9) PSC 9620, Minerals, Natural and Synthetic; and

(10) PSC 9630, Additive Metal Materials.

Place of manufacture means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture.

Predecessor means an entity that is replaced by a successor and includes any predecessors of the predecessor.

Reasonable inquiry has the meaning provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Restricted business operations means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174).

Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate—

(1) Are conducted under contract directly and exclusively with the regional government of southern Sudan;

(2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization;

(3) Consist of providing goods or services to marginalized populations of Sudan;

(4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization;

(5) Consist of providing goods or services that are used only to promote health or education; or

(6) Have been voluntarily suspended."Sensitive technology"— Sensitive technology—

(1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically—

(i) To restrict the free flow of unbiased information in Iran; or

(ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and

(2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3)of the International Emergency Economic Powers Act ( 50 U.S.C. 1702(b)(3)).

Service-disabled veteran-owned small business (SDVOSB) concern means a small business concern— (1)

(i) Not less than 51 percent of which is owned and controlled by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and

(ii) The management and daily business operations of which are controlled by one or more service disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran; or

(2) A small business concern eligible under the SDVOSB Program in accordance with 13 CFR part 128 (see subpart 19.14).

(3) Service-disabled veteran, as used in this definition, means a veteran as defined in 38 U.S.C. 101(2), with a disability that is service connected, as defined in 38 U.S.C. 101(16), and who is registered in the Beneficiary Identification and Records Locator Subsystem, or successor system that is maintained by the Department of Veterans Affairs’ Veterans Benefits Administration, as a service-disabled veteran.

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that—

(1) Effective January 1, 2024, is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300; or

(2) Has represented that it is an SDVOSB concern in SAM and submitted a complete application for certification to SBA on or before December 31, 2023.

Service-disabled veteran-owned small business (SDVOSB) Program means a program that authorizes contracting officers to limit competition, including award on a sole-source basis, to SDVOSB concerns eligible under the SDVOSB Program.

Small business concern—

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and size standards in this solicitation.

(2) Affiliates, as used in this definition, means business concerns, one of whom directly or indirectly controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern, consistent with 13 CFR 124.1001, means a small business concern under the size standard applicable to the acquisition, that—

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by—

(i) One or more socially disadvantaged (as defined at13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States; and

(ii) Each individual claiming economic disadvantage has a net worth not exceeding the threshold at 13 CFR 124.104(c)(2) after taking into account the applicable exclusions set forth at 13 CFR124.104(c)(2);

and

(2) The management and daily business operations of which are controlled (as defined at 13.CFR 124.106) by individuals, who meet the criteria in paragraphs (1)(i) and (ii) of this definition.

Subsidiary means an entity in which more than 50 percent of the entity is owned—

(1) Directly by a parent corporation; or

(2) Through another subsidiary of a parent corporation Successor means an entity that has replaced a predecessor by acquiring the assets and carrying out the affairs of the predecessor under a new name (often through acquisition or merger). The term "successor" does not include new offices/divisions of the same company or a company that only changes its name. The extent of the responsibility of the successor for the liabilities of the predecessor may vary, depending on State law and specific circumstances.

Veteran-owned small business concern means a small business concern—

(1) Not less than 51 percent of which is owned and controlled by one or more veterans (as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and

(2) The management and daily business operations of which are controlled by one or more veterans.

Women-owned business concern means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women Women-owned small business concern means a small business concern—

(1) That is at least 51 percent owned by one or more women; or, in the case of any publicly owned business, at least51 percent of the stock of which is owned by one or more women; and

(2) Whose management and daily business operations are controlled by one or more women.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127), means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third party certifier in accordance with 13 CFR 127.300.

(b)

(1) Annual Representations and Certifications. Any changes provided by the Offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications in SAM.

(2) The offeror has completed the annual representations and certifications electronically in SAM accessed through http://www.sam.gov. After reviewing SAM information, the Offeror verifies by submission of this offer that the representations and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard(s) applicable to the NAICS code(s) referenced for this solicitation), at the time this offer is submitted and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs __.

[Offeror to identify the applicable paragraphs at (c) through (v) of this provision that the offeror has completed for the purposes of this solicitation only, if any.

These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer.

Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on SAM.]

(c) Offerors must complete the following representations when the resulting contract is for supplies to be delivered or services to be performed in the United States or its outlying areas, or when the contracting officer has applied part 19 in accordance with 19.000(b)(1)(ii). Check all that apply.

(1) Small business concern. The offeror represents as part of its offer that—

(i) It ¿ is, ¿ is not a small business concern; or

(ii) It ¿ is, ¿ is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it ¿ is, ¿ is not a veteran-owned small business concern.

(3) SDVOSB concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents that it ¿ is, ¿ is not an SDVOSB concern.

(4) SDVOSB concern joint venture eligible under the SDVOSB Program. The offeror represents that it ¿ is, ¿ is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [Complete only if the offeror represented itself as an SDVOSB concern in paragraph (c)(3) of this provision.] [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(5) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it ¿ is, ¿ is not a small disadvantaged business concern as defined in 13 CFR 124.1001.

(6) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it ¿ is, ¿ is not a women-owned small business concern.

(7) WOSB joint venture eligible under the WOSB Program. The offeror represents that it ¿ is, ¿ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.]

(8) Economically disadvantaged women-owned small business (EDWOSB) joint venture. The offeror represents that it ¿ is, ¿ is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____________.] Note to paragraphs (c)(9) and (10): Complete paragraphs (c)(9) and (10) only if this solicitation is expected to exceed the simplified acquisition threshold.

(9) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it ¿ is a women-owned business concern.

(10) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price:____________

(11) HUBZone small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, as part of its offer, that–

(i) It ¿ is, ¿ is not a HUBZone small business concern listed, on the date of this representation, as having been certified by SBA as a HUBZone small business concern in the Dynamic Small Business Search and SAM, and will attempt to maintain an employment rate of HUBZone residents of 35 percent of its employees during performance of a HUBZone contract (see 13 CFR 126.200(e)(1)); and

(ii) It ¿ is, ¿ is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [The offeror shall enter the name and unique entity identifier of each party to the joint venture: ______.] Each HUBZone small business concern participating in the HUBZone joint venture shall provide representation of its HUBZone status.

(d) [Reserved]

(e) Certification Regarding Payments to Influence Federal Transactions (31 http://uscode.house.gov/ U.S.C. 1352).