Sodium Brine SDS.pdf
PDF 187 KB Posted
- Attached to
- Tanker Trailers
- Solicitation number
- 300000240461582
- Issued by
- Missouri
About this file
This is a Safety Data Sheet (SDS) for sodium brine ice melting product manufactured by Hot Salt LLC, a company located in Springfield, Massachusetts. The document provides comprehensive hazard identification and handling procedures for the salt brine product, which consists of 23.3% sodium chloride and 76.7% water. The primary intended use is ice melting operations. The product is classified as a hazardous material under the OSHA Hazard Communication Standard, with major health hazards identified as causing eye and skin irritation and being harmful if swallowed. The SDS indicates that brief skin contact is essentially non-irritating, but prolonged contact may cause skin irritation or burns, particularly if skin is damp, abraded, or covered. Eye contact may cause slight irritation with mechanical injury only, and ingestion of larger amounts may result in gastrointestinal irritation or ulceration. The material does not burn and is not regulated for transportation under U.S. DOT or Canadian dangerous goods regulations.
The SDS specifies that personal protective equipment requirements include safety glasses with side shields, body-covering clothing, and chemically resistant gloves made of neoprene, polyvinyl chloride, or nitrile materials. For dusty operations or handling of solutions, chemical goggles are required. Storage must occur in a dry place protected from atmospheric moisture, and dilution should use cool water below 80 degrees Fahrenheit due to heat development during the process. The product is not classified as a carcinogen by the National Toxicology Program, International Agency for Research on Cancer, or OSHA. Disposal must comply with all federal, state, and local regulations, with preferred options including licensed landfills and wastewater treatment systems. The SDS was last revised on January 9, 2018, and customer service is available at 954-781-9200.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MODOT NW 0000000027SL_SUPPLIER.pdf | ||
| Tanker Trailer Specifications MO-DOT.pdf | ||
| Exhibit N - IFB - BUY AMERICAN FORM.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SAFETY DATA SHEET
Salt Brine, Brine Made Easy Brine
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Company Identification:
Hot Salt LLC
125 Frank B Murray Street
Springfield MA,01103
24 Hour Emergency Telephone . CHEMTREC:1-800-424-9300
Number: CCN678493 International CHEMTREC phone number: +1 703-527-3887
To Request an SDS: SDS@ www.deicingdepot.com or 954-781-9200
Customer Service: 954-781-9200
Product Use: Ice Melting
2. HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW:
Color: Light
Physical State: Liquid
Odor: Odorless
Signal Word: WARNING
MAJOR HEALTH HAZARDS: CAUSES EYE AND SKIN IRRITATION. HARMFUL IF SWALLOWED.
POTENTIAL HEALTH EFFECTS:
Inhalation: none .
Skin contact: Brief contact is essentially nonirritating to skin. Prolonged contact may cause skin irritation, even a burn. Not classified as corrosive to the skin according to DOT guidelines. May cause more severe response if skin is damp. May cause more severe response if skin is abraded (scratched or cut). May cause more severe response on covered skin (under clothing, gloves).
Eye contact: For Liquid: May cause slight eye irritation, mechanical injury only.
Ingestion: Low toxicity if swallowed. Small amounts swallowed incidentally as a result of normal handling operations are not likely to cause injury; however, swallowing larger amounts may cause injury.
Swallowing may result in gastrointestinal irritation or ulceration.
See Section 11: TOXICOLOGICAL INFORMATION http://www.deicingdepot.com/
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
3. COMPOSITION/INFORMATION ON INGREDIENT
Component % CAS Number
Sodium chloride 23.3 7647-14-5
Water 76.7 7732-18-5
4. FIRST AID MEASURES
INHALATION: Move person to fresh air; if effects occur, consult a physician.
SKIN CONTACT: Wash off immediately with plenty of water.
EYE CONTACT: Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. If effects occur, consult a physician, preferably an ophthalmologist. May cause injury due to mechanical action.
INGESTION: If swallowed, do not induce vomiting. Give one cup (8 ounces or 240 ml) of water or milk if available and transport to a medical facility. Never give anything by mouth to an unconscious or convulsive person.
Protection of First-Aiders: If potential for exposure exists refer to Section 8 for specific personal protective equipment.
Notes to Physician: Due to irritant properties, swallowing may result in burns/ulceration of mouth, stomach and lower gastrointestinal tract with subsequent stricture. Aspiration of vomitus may cause lung injury. Suggest endotracheal/esophageal control if lavage is done. If burn is present, treat as any thermal burn, after decontamination. No specific antidote. Treatment of exposure should be directed at the control of symptoms and the clinical condition of the patient.
5. FIRE-FIGHTING MEASURES
Fire Hazard: This material does not burn
Extinguishing Media: Use extinguishing agents appropriate for surrounding fire.
Fire Fighting: Keep unnecessary people away, isolate hazard area and deny entry. This material does not burn. Fight fire for other material that is burning. Water should be applied in large quantities as fine spray. Wear NIOSH approved positive-pressure self-contained breathing apparatus operated in pressure demand mode. Wear protective fire fighting clothing (includes fire fighting helmet, coat, trousers, boots, and gloves). Avoid contact with this material during fire fighting operations. If contact is likely, change to full chemical resistant fire fighting clothing with self-contained breathing apparatus. If this is not available, wear full chemical resistant clothing with self-contained breathing apparatus and fight fire from a remote location. For protective equipment in post-fire or non-fire clean-up situations, refer to the relevant sections.
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
Lower Flammability Level (air): Not applicable Upper Flammability Level (air): Not applicable Flash point: Not applicable Autoignition Temperature: Not applicable
6. ACCIDENTAL RELEASE MEASURES
Occupational Release: Small and large spills: Contain spilled material if possible. Collect in suitable and properly labeled containers. Flush residue with plenty of water. See Section 13, Disposal Considerations, for additional information.
Personal Precautions: Isolate area. Keep unnecessary and unprotected personnel from entering the area. Use appropriate safety equipment. For additional information, refer to Section 8, Exposure Controls and Personal Protection. Refer to Section 7, Handling, for additional precautionary measures.
Environmental Precautions: Prevent from entering into soil, ditches, sewers, waterways and/or groundwater. See Section 12, Ecological Information.
7. HANDLING AND STORAGE
Storage Conditions: Store in a dry place. Protect from atmospheric moisture.
Handling Procedures: Heat developed during diluting or dissolving is very high. Use cool water when diluting or dissolving (temperature less than 80°F, 27°C). Avoid contact with eyes, skin, and clothing. Do not swallow. Wash thoroughly after handling. Keep container tightly closed. See Section 8, EXPOSURE
CONTROLS AND PERSONAL PROTECTION.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Regulatory Exposure limit(s): As listed below
Component OSHA Final PEL TWA OSHA Final PEL STEL OSHA Final PEL Ceiling
Particulates not otherwise regulated
TWA 15 mg/m3 (total) TWA 5 mg/m3
OEL: Occupational Exposure Limit; OSHA: United States Occupational Safety and Health Administration; PEL: Permissible Exposure Limit; TWA: Time Weighted Average; STEL: Short Term Exposure Limit
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
Non-Regulatory Exposure limit(s): As listed below
Component CAS
NUMBER
ACGIH
TWA
ACGIH
STEL
ACGIH
CEILING
OSHA TWA
(VACATED)
OSHA
STEL
(VACATED)
OSHA
CEILING
(VACATED)
Particles Not Otherwise Specified
(PNOS)
Not Assigned
TWA 10
mg/m3 (inhalable)
TWA 3
mg/m3 (respirable)
- The Non-Regulatory United States Occupational Safety and Health Administration (OSHA) limits shown in the table are the Vacated 1989 PEL's (vacated by 58 FR 35338, June 30, 1993).
- The American Conference of Governmental Industrial Hygienists (ACGIH) is a voluntary organization of professional industrial hygiene personnel in government or educational institutions in the United States. The ACGIH develops and publishes recommended occupational exposure limits each year called Threshold Limit Values (TLVs) for hundreds of chemicals, physical agents, and biological exposure indices.
Additional Advice: Ingestion: Use good personal hygiene. Do not consume or store food in the work area. Wash hands before smoking or eating.
ENGINEERING CONTROLS: Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations. Local exhaust ventilation may be necessary for some operations.
PERSONAL PROTECTIVE EQUIPMENT:
Eye Protection: Wear safety glasses with side-shields. For dusty operations or when handling solutions of the material, wear chemical goggles.
Skin and Body Protection: Wear clean, body-covering clothing
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
Hand Protection: Use gloves chemically resistant to this material. If hands are cut or scratched, use gloves chemically resistant to this material even for brief exposures. Examples of preferred glove barrier materials include: Neoprene, Polyvinyl chloride ("PVC" or "vinyl"), Nitrile/butadiene rubber ("nitrile" or "NBR"). NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.
Respiratory Protection: Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, wear respiratory protection when adverse effects, such as respiratory irritation or discomfort have been experienced, or where indicated by your risk assessment process. In dusty or misty atmospheres, use an approved particulate respirator. The following should be effective types of air-purifying respirators: High efficiency particulate air (HEPA) N95. A respiratory protection program that meets 29 CFR 1910.134 must be followed whenever workplace conditions warrant use of a respirator.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Pellets Color: White Odor: Odorless Freezing Point/Range: Not applicable to solids Melting Point/Range: 772 °C (1,422 °F) Literature Approximately Decomposition Temperature: Not applicable Vapor Pressure: Literature negligible at ambient temperature Vapor Density (air=1): Not applicable Specific Gravity (water=1): Not applicable to solids Bulk Density: 58 - 66 lb/ft3 Estimated Water Solubility: Readily soluble pH: Not applicable to solids Flash point: Not applicable Lower Flammability Level (air): Not applicable Upper Flammability Level (air): Not applicable Autoignition Temperature: Not applicable Hygroscopic: Yes
10. STABILITY AND REACTIVITY
Reactivity/ Stability: Stable. Conditions to Avoid: None known. Avoid moisture.
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:08
Incompatibilities/ Materials to Avoid: Avoid contact with: Corrosive when wet. Sodium. Reaction of impurity with oxidizing materials
Hazardous Decomposition Products: Does not decompose
Hazardous Polymerization: Will not occur.
11. TOXICOLOGICAL INFORMATION
TOXICITY DATA:
LD50 Oral: Typical for this family of materials. LD50, Rat 918 - 1,668 mg/kg LD50 Dermal: For the major component(s): LD50, Rabbit > 5,000 mg/kg
CHRONIC TOXICITY:
sodium chloride has shown a strong association between elevated blood pressure and prolonged dietary overuse. Related effects could occur in the kidneys.
CARCINOGENICITY: This product is not classified as a carcinogen by NTP, IARC or OSHA.
MUTAGENIC DATA: The data presented are for the following material: Sodium chloride) – : Sodium chloride – In vitro genetic toxicity studies were predominantly negative.
DEVELOPMENTAL TOXICITY: For the major component(s): Did not cause birth defects or any other fetal effects in laboratory animals.
12. ECOLOGICAL INFORMATION
ECOTOXICITY DATA:
Aquatic Toxicity:
Material is practically non-toxic to aquatic organisms on an acute basis (LC50/EC50/EL50/LL50 >100 mg/L in the most sensitive species tested)
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
Freshwater Fish Toxicity:
Sodium Chloride: LC50, fathead minnow (Pimephales promelas): 10,610 mg/l
Invertebrate Toxicity:
Sodium Chloride: LC50, water flea Daphnia magna: 4,571 mg/l
Algae Toxicity:
Sodium Chloride: IC50, OECD 209 Test; activated sludge, respiration inhibition: > 1,000 mg/l
FATE AND TRANSPORT:
BIODEGRADATION: Biodegradation is not applicable.
BIOCONCENTRATION: No bioconcentration is expected because of the relatively high water solubility.
Potential for mobility in soil is very high (Koc between 0 and 50). Partitioning from water to n-octanol is not applicable.
13. DISPOSAL CONSIDERATIONS
Reuse or recycle if possible. All disposal practices must be in compliance with all Federal, State/Provincial and local laws and regulations. Regulations may vary in different locations. Report spills if applicable. Waste characterizations and compliance with applicable laws are the responsibility solely of the waste generator. AS YOUR SUPPLIER, WE HAVE NO CONTROL OVER THE MANAGEMENT PRACTICES OR MANUFACTURING PROCESSES OF PARTIES HANDLING OR USING THIS MATERIAL. THE INFORMATION PRESENTED HERE PERTAINS ONLY TO THE PRODUCT AS SHIPPED IN ITS INTENDED CONDITION AS DESCRIBED IN MSDS SECTION: Composition Information. FOR UNUSED & UNCONTAMINATED PRODUCT, the preferred options include sending to a licensed, permitted: Landfill and waste water treatment system.
14. TRANSPORT INFORMATION
U.S. DOT 49 CFR 172.101:
Status: Not regulated
CANADIAN TRANSPORTATION OF DANGEROUS GOODS:
Status: Not regulated
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
15. REGULATORY INFORMATION
U.S. REGULATIONS
-OSHA REGULATORY STATUS:
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200)
-CERCLA SECTIONS 102a/103 HAZARDOUS SUBSTANCES (40 CFR 302.4): Not regulated.
-EPCRA EXTREMELY HAZARDOUS SUBSTANCES (40 CFR 355.30): Not regulated
-EPCRA SECTIONS 311/312 HAZARD CATEGORIES (40 CFR 370.10):
Acute Health Hazard
-EPCRA SECTION 313 (40 CFR 372.65):
To the best of our knowledge, this product does not contain chemicals at levels which require reporting under this statute.
-OSHA PROCESS SAFETY (PSM) (29 CFR 1910.119): Not regulated
NATIONAL INVENTORY STATUS
-U.S. INVENTORY STATUS: Toxic Substance Control Act (TSCA): All components are listed or exempt
-TSCA 12(b): This product is not subject to export notification
-Canadian Chemical Inventory: Canadian Chemical Inventory:
STATE REGULATIONS
California Proposition 65: This product is not listed, but it may contain impurities/trace elements known to the State of California to cause cancer or reproductive toxicity as listed under Proposition 65 State Drinking Water and Toxic Enforcement Act. WARNING: This product (when used in aqueous formulations with a chemical oxidizer such as ozone) may react to form calcium bromate, a chemical known to the State of California to cause cancer.
Calcium Chloride
California Proposition 65 Cancer WARNING: Not Listed
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
Calcium Chloride
California Proposition 65 CRT List - Male reproductive toxin:
Not Listed
California Proposition 65 CRT List - Female reproductive toxin: Not Listed
Massachusetts Right to Know Hazardous Substance List Not Listed
New Jersey Right to Know Hazardous Substance List Not Listed
New Jersey Special Health Hazards Substance List Not Listed
New Jersey - Environmental Hazardous Substance List Not Listed
Pennsylvania Right to Know Hazardous Substance List Not Listed
Pennsylvania Right to Know Special Hazardous Substances Not Listed
Pennsylvania Right to Know Environmental Hazard List Not Listed
Rhode Island Right to Know Hazardous Substance List Not Listed
Potassium Chloride
California Proposition 65 Cancer WARNING: Not Listed
California Proposition 65 CRT List – Male reproductive toxin: Not Listed
California Proposition 65 CRT List - Female reproductive toxin: Not Listed
Massachusetts Right to Know Hazardous Substance List Not Listed
New Jersey Right to Know Hazardous Substance List Not Listed
New Jersey Special Health Hazards Substance List Not Listed
New Jersey - Environmental Hazardous Substance List Not Listed
Pennsylvania Right to Know Hazardous Substance List Not Listed
Pennsylvania Right to Know Special Hazardous Substances Not Listed
Pennsylvania Right to Know Environmental Hazard List Not Listed
Rhode Island Right to Know Hazardous Substance List Not Listed
Sodium chloride
California Proposition 65 Cancer WARNING: Not Listed
California Proposition 65 CRT List - Male Not Listed
California Proposition 65 CRT List - Female reproductive toxin: Not Listed
Massachusetts Right to Know Hazardous Substance List Not Listed
New Jersey Right to Know Hazardous Substance List Not Listed
New Jersey Special Health Hazards Substance List Not Listed
New Jersey - Environmental Hazardous Substance List Not Listed
Pennsylvania Right to Know Hazardous Substance List Not Listed
Pennsylvania Right to Know Environmental Hazard List Not Listed
Pennsylvania Right to Know Special Hazardous Substances Not Listed
Rhode Island Right to Know Hazardous Substance List Not Listed
CANADIAN REGULATIONS
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the SDS contains all the information required by the Controlled Products Regulations.
WHMIS - Classifications of Substances:
• D2B - Poisonous and Infectious Material; Materials causing other toxic effects - Toxic material
SDS NO: Salt Brine Rev. Date: 09-Jan-2018 Rev. Num.:03
16. OTHER INFORMATION
Prepared by: Deicing Depot
Disclaimer: A Brine chloride product - Snow and ice melting. We recommend that you use this product in a manner consistent with the listed use. If your intended use is not consistent with the stated use in Section 1 of this SDS, please contact your sales or technical service representative.
This information is intended solely for the use of individuals trained in the NFPA and/or HMIS systems.
HMIS: (SCALE 0-4) (Rated using National Paint & Coatings Association HMIS: Rating Instructions, 2nd Edition)
Health: 2 Flammability: 0 Reactivity: 0
NFPA 704 - Hazard Identification Ratings (SCALE 0-4)
Health: 1 Flammability: 0 Reactivity: 0
Reason for Revision:
• Three year review
• Updated the (M)SDS header
• Updated 24 Hour Emergency Telephone Number: SEE SECTION 1
• Format change to sections: .?
• Modified Exposure Limit Information: SEE SECTION 8
• Revised Canadian Domestic Substance List language: SEE SECTION 15
• Revised California Proposition 65 Statement: SEE SECTION 15
• Revised Preparer Information: SEE SECTION 16
• Added "End of Safety Data Sheet" phrase
IMPORTANT: The information presented herein, while not guaranteed, was prepared by technical personnel and is true and accurate to the best of our knowledge. NO WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, OR WARRANTY OR GUARANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, IS MADE REGARDING PERFORMANCE, SAFETY, SUITABILITY, STABILITY OR OTHERWISE. This information is not intended to be all-inclusive as to the manner and conditions of use, handling, storage, disposal and other factors that may involve other or additional legal, environmental, safety or performance considerations, and Deicing Depot assumes no liability whatsoever for the use of or reliance upon this information. While our technical personnel will be happy to respond to questions, safe handling and use of the product remains the responsibility of the customer. No suggestions for use are intended as, and nothing herein shall be construed as, a recommendation to infringe any existing patents or to violate any Federal, State, local or foreign laws.
OSHA Standard 29 CFR 1910.1200 requires that information be provided to employees regarding the hazards of chemicals by means of a hazard communication program including labeling, safety data sheets, training and access to written records. We request that you, and it is your legal duty to, make all information in this Safety Data Sheet available to your employees Page 10 of 10
File details come from the government source that posted it. Updated .