SOC Mod Statement (Updated) (004).docx

41st CST Trailer Modifications Statement of Work

The following modifications are required on a 24’ Box Trailer. 8.5’ wide, and 7’4” tall. See “CST Trailer Basic Specs 2022.pdf” file for trailer-specific details.

Curbside Awning

· Furnish and install 8' x 16' (16’ running along the length of the trailer and 8’ out when fully deployed out) power retractable awning in white/black. Awning should be able to be hand-cranked in the event of power loss. Fabric color should be black topside and white underside when deployed.

Interior Modifications

· Install light-weight (14 GA Steel) and removable storage cabinets on curbside wall. Cabinets must be securely mounted inside the trailer when moving, but also removable when required.

· The cabinet manufacturer should have features similar to the Moduline Pro II series cabinet in order to match the brand and styling of the cabinets currently installed in the trailer. Cabinets will be black to provide for longevity against degradation and tarnish due to high usage.

· Vendor will provide and install shelves per CAD drawing and following specifications:

· Install wheels on bottom of cabinets. Cabinets should be installed, per the “TOP VIEW WITHOUT COUNTER TOP” diagram and adhere to the following specifications:

· Bottom of cabinets should be mounted 49 inches from the ceiling

· Storage cabinets will be secured and locked in place.

· Drill holes in rear of cabinets with grommets for electrical connections. Each of the cabinets should have grommet cut out to allow for a 10 plug power strip to be installed in the interior of each cabinet to ensure charging of equipment and easy removal of toolboxes when required. Proper electrical cord protection routing should be installed from each cabinet to trailer wall plug for each power strip.

· One 32"h x 18"d x 36"w toolbox with 3 drawers 9" deep

· One 32"h x 18"d x 24"w toolbox with 3 drawers 9" deep

· One 32"h x 18"d x 24"w toolbox with 4 drawers 7" deep

· One 32"h x 18"d x 24"w cabinet with single door and adjustable shelves

· Two 32"h x 24"d x 24"w cabinet with single door and adjustable shelves

· One bottom shelf and two adjustable shelves per cabinet.

· Supply 2" Black foam inserts for all drawers.

· Install 14ga. stainless steel shelf x 24 5/8"w x 156"lg at curbside wall. Passenger Shelf must be removable. Passenger shelf surface should be 45 inches from the floor of the trailer.

· Install 14ga. stainless steel shelf x 17" x 95" shelf on front wall, 51 inches above the floor.

· Install four 8-outlet power strips 4 inches above countertop on the front wall.

· Remove fold down seat on driverside wall.

· Furnish and mount two (2) 55" LED Smart TV's with the following specifications:

· 4K Resolution

· 4 x HDMI Inputs

· 2 x USB Inputs

· Bluetooth enabled

· Built-in Wifi

· 1 x Ethernet Port

· Product depth 3” or less without stand

· Mount to swing up, and secure to, ceiling when transporting.

· One TV will be installed on the front wall of the trailer above the workstation area. The other TV will be installed above the Driver’s Side Wheel Box. Power and HDMI cord from TV monitor(s) will need to be routed to front workstation area.

Exterior Modifications:

· Side door locks: Replace all paddle side door locks with exterior padlocking handles and interior handles. Padlocks on each handle will be common-keyed.

Misc.

· Supply 40ft 6/4 50A extension cable with male and female twist plugs.