snyder-tank_5990902n.pdf
PDF 129 KB Posted
- Solicitation number
- DPW463-04012025-Double Wall Storage Tanks
- Issued by
- Wayne County, Michigan
About this file
This technical drawing is a detailed schematic for a Snyder Industries 750-gallon double-wall tank (Part No. IGG, ASM TK 750DCT X 64) produced in 2021, specifically designed for the City of Livonia, Michigan's storage requirements. The document provides precise dimensional specifications for a white High-Density Polyethylene (HDPE) tank, including key features such as an 18" PE threaded/vented manway with 15" access, four tiedown/lifting lugs positioned at 90-degree intervals, and specific design constraints like sidewall outlet placement restrictions.
The technical specifications indicate the tank has nominal dimensions with a 3% tolerance for rotational molded parts, with potential diameter increases of 4-6 inches if foam insulation is applied. Critical installation notes include requirements for independent external piping support, installation of only base fittings during shipment, and a recommendation to consult Snyder's Guidelines for Use and Installation prior to delivery. The City of Livonia is seeking four of these tanks for storing various liquids until testing and off-site transport, with the tanks not requiring additional components like a top draw-tube assembly, 2" vent, or transition fitting.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Q&A Document 1.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ALL DIMENSIONS ARE IN INCHES, NOMINAL, & SUBJECT TO CHANGE WITHOUT NOTICE.
ALL DIMENSIONS ON ROTATIONAL MOLDED PARTS ARE SUBJECT TO A 3% TOLERANCE.
*ALL EXTERNAL PIPING MUST BE INDEPENDENTLY SUPPORTED.
*ONLY BASE FITTINGS TO BE LEFT INSTALLED AT TIME OF SHIPMENT PER SII PROCEDURE.
*TANKS ORDERED WITH FOAM INSULATION WILL HAVE AN INCREASED DIAMETER OF 4-6 INCHES.
*Consult Snyder's Guidelines for Use and Installation prior to delivery.
Available on-line at http://www.snyderindustriestanks.com/Technical
64.9
55.0 64.0
65.9 63.3
3.8
18" PE THREADED/VENTED
MANWAY w/ 15" ACCESS
20.5
9.0 13.6
73.0 68.0
0°
45°
90°
135°
180°
225°
270°
315°
TIEDOWN/LIFTING
LUGS 4 PLCS. 90 TYP.
*SIDEWALL OUTLETS CANNOT BE INSTALLED 180° APART ON THIS TANK
PART NO.
IGG
DRAWN BYDO NOT SCALE TITLE:
ENG. ID.
REVISION
ASM TK 750DCT X 64
SHEET
© SNYDER INDUSTRIES, LLC, 2021
ALL DIMENSIONS, DESIGNS, AND INFORMATION ON THIS PRINT MUST BE
CONSIDERED PROPRIETARY TO SNYDER INDUSTRIES, LLC, AND MAY NOT
BE USED, COPIED, OR DISTRIBUTED WITHOUT WRITTEN PERMISSION OF AN
OFFICER (OR HIS AGENT) OF THE FIRM.
STATUS: Released
D0116425990902N___01(402) 467-5221 www.snydernet.com
A http://www.snyderindustriestanks.com/Technical/Guidelines-for-Use-Installation
| Sheet1 |
| Drawing View1 |
| Drawing View2 |
File details come from the government source that posted it. Updated .