Alarms_install_and_maintenance_solicitation_New.docx

TABLE OF CONTENTS

Section 1 - The Schedule

· SF 18 or SF 1449 cover sheet

· Continuation To SF-1449, RFQ Number S-NL-16-Q-0007, Prices, Block 23

· Continuation To SF-1449, RFQ Number S-NL800-16-Q-0007, Schedule Of Supplies/Services, Block 20 Description/Specifications/Work Statement

· Attachment 1 to Description/Specifications/Performance Work Statement, Government Furnished Property

Section 2 - Contract Clauses

· Contract Clauses

· Addendum to Contract Clauses - FAR and DOSAR Clauses not Prescribed in Part 12

Section 3 - Solicitation Provisions

· Solicitation Provisions

· Addendum to Solicitation Provisions - FAR and DOSAR Provisions not Prescribed in Part 12

Section 4 - Evaluation Factors

· Evaluation Factors

· Addendum to Evaluation Factors - FAR and DOSAR Provisions not Prescribed in Part 12

Section 5 - Representations and Certifications

· Representations and Certifications

· Addendum to Offeror Representations and Certifications - FAR and DOSAR Provisions not Prescribed in Part 12

SECTION 1 - THE SCHEDULE

CONTINUATION TO SF-1449

RFQ NUMBER S- NL800-16-Q-0007

PRICES, BLOCK 23

Continuation/Addendum to SF-1449, RFQ Number S-NL800-16-Q-0006

1. SCOPE OF CONTRACT

The Contractor shall provide, install, and maintain residential alarm systems for the U.S. Mission in the Netherlands, which encompasses locations in The Hague, Wassenaar, Rotterdam, Amsterdam and Amstelveen.

The performance period of this contract is from the start date in the Notice to Proceed and continuing for 12 months, with four (4), one-year options to renew. The initial period of performance includes any transition period authorized under the contract.

2. PRICING

This is a fixed-price indefinite quantity/indefinite delivery contract with four (4) one-year options.

(a) The Contractor shall provide the services for the base period of the contract at the rates shown below and any option years exercised by the Government.

(b) The quantities of supplies and services specified in the Schedule are estimates only and are not guaranteed by this contract.

(c) The Contractor shall furnish to the Government, when and if ordered, the supplies or services as specified in this contract. The Government may issue orders requiring delivery to multiple destinations or performance at multiple locations. Except as specified in the Delivery-Order Limitations clause or in the paragraph below, there is no limit on the number of orders that may be issued/ordered.

(d) The prices listed below shall in include all labor, materials, overhead, and profit.

(e) VALUE ADDED TAX.

Value Added Tax (VAT) is not applicable to this contract and shall not be included in the CLIN rates or Invoices because the U.S. Embassy has a tax exemption certificate from the host government.

(f) OFFERS AND PAYMENT IN U.S. DOLLARS U.S. firms are eligible to be paid in U.S. dollars. U.S. firms desiring to be paid in U.S. dollars should submit their offers in U.S. dollars. A U.S. firm is defined as a company which operates as a corporation incorporated under the laws of a state within the United States.

FOREIGN FIRMS - Any firm, which is not a U.S. firm, is a foreign firm. Any firm that does not meet the above definition of U.S. firm shall submit its prices and receive payment in local currency

2.1. Base Year Prices

Option Term: Twelve (12) month period after Notice to Proceed (NTP) issued:

2.1.12. MINIMUM/MAXIMUM

The U.S. Government guarantees the following minimum and maximum orders under this contract during this base year:

Furnishing, installation, testing, preventive maintenance and removal of alarm systems: minimum of $5,000; maximum $300,000.00

2.2 Option Year 1 Prices

Option Term: Twelve (12) month period from expiration of Base Year:

2.2.12 MINIMUM/MAXIMUM

The U.S. Government guarantees the following minimum and maximum orders under this contract during this first option year:

Furnishing, installation, testing and preventive maintenance and removal of alarm systems: minimum of $5,000.00); maximum of $150,000.00

2.3 Option Year 2 Prices

Option Term: Twelve (12) month period from expiration of Option Year 1:

2.3.12. MINIMUM/MAXIMUM

The U.S. Government guarantees the following minimum and maximum orders under this contract during this second option year:

Furnishing, installation, testing, preventive maintenance and removal of alarm systems: minimum of $5,000.00; maximum of $150,000.00

2.4 Option Year 3 Prices

Option Term: Twelve (12) month period from expiration of Option Year 2:

2.4.12. MINIMUM/MAXIMUM

The U.S. Government guarantees the following minimum and maximum orders under this contract during this third option year:

Furnishing, installation, testing, preventive maintenance and removal of alarm systems: minimum of $5,000.00 maximum of $150,000.00

2.5 Option Year 4 Prices

Option Term: Twelve (12) month period from expiration of Option Year 3:

2.5.12. MINIMUM/MAXIMUM

The U.S. Government guarantees the following minimum and maximum orders under this contract during this third option year:

Furnishing, installation, testing, preventive maintenance and removal of alarm systems: minimum of $5,000.00 maximum of $150,000.00

2.6 GRAND TOTAL PRICE

Base Year Total

Option Year 1 Total

Option Year 2 Total

Option Year 3 Total

Option Year 4 Total

Grand Total of Base plus All Option Years

CONTINUATION TO SF-1449,

RFQ NUMBER S-NL800-16-Q-0007

SCHEDULE OF SUPPLIES/SERVICES, BLOCK 20

1. PERFORMANCE WORK STATEMENT (PWS)

The Contractor shall activate and/or provide and install an alarm system for each residence and office location covered under this contract. The alarm systems provided shall interface with a Central Alarm Monitoring System (CAMS) via radio signal (not telephone lines) using repeaters supplied by the Contractor as necessary. The alarm system, when activated, shall sound an alarm at the Contractor’s base operations center (called “the Center”) and the Contractor shall be able to monitor all alarm soundings for immediate reaction.

The alarm systems shall have available and use of common hardwire/wireless alarm sensors/transmitters, including, but not limited to, the following:

· Window/door contact sensors or motion detectors

· Hand-held panic buttons In the case of wireless sensors/transmitters, long-life lithium batteries to be used only for backup power shall be provided with the equipment. The alarm systems and all components shall meet or exceed the requirements as set forth by the Kingdom of the Netherlands and the commonly accepted U.S. Industry standards for design, reliability and performance for the detection of unauthorized intrusions while minimizing the number of “false” alarms.

The Government shall test the radio transmitter and/or detection equipment on a regular basis, and in any event not later than 72 hours prior to vacating/leaving premises unattended for any period exceeding seven days, by contacting the Contractor’s control room and providing the operator with the designated code.

The Government shall notify the Contractor as soon as it has notice or becomes aware of any damage or destruction to the radio transmitter or detection equipment from any cause, including damage or destruction by electric storm. It is agreed that the Contractor will not be able to provide service until the damage or destruction is repaired, except in the case of an emergency telephoned into the Contractor’s control room.

1.1. MONITORING

The CAMS shall operate 24 hours a day, 7 days a week. Upon receiving an alarm activation or telephone call requesting assistance at the Center, the Contractor shall immediately notify the Dutch National Police and the U.S. Embassy’s Marine Security Guard Post 1 via telephone.

The actual phone number will be provided to the contractor after contract award.

The COR may periodically test reaction capability. This test will be with the knowledge of the Contractor. The Government will give notice to the Contractor one (1) week in advance of such testing.

1.1.1. BASE OPERATING CENTER

The Contractor shall maintain a 24-hour, 365-day per year operation center. The Contractor must staff the operation center with personnel who possess working-level English language capability. The Center shall be responsible for receiving alarms/signals from Government residences, office locations, employees, or dependents indicating a need for emergency assistance.

1.1.2. LOGS AND RECORDS.

The Contractor shall keep a complete log of all calls, follow-up action, report malfunctions, and equipment maintenance and provide a copy to the Government.

1.1.3. NOTIFICATION TO THE EMBASSY

Immediately after an alarm or panic alert is received, the Contractor’s operation center shall notify the Embassy’s Marine Security Guard Post 1 via telephone and keep Post 1 informed concerning the progress/resolution of the situation.

ACTIVATE EXISTING ALARMS SYSTEMS

The Contractor shall survey and activate existing alarm systems in designated residences. After each activation the Contractor shall run a complete test of the system including a test of each individual detention unit, the siren (s), and the central unit. In case of troubleshooting, the Contractor will determine the fault and perform any necessary repair to make the system operable, in consultation with COR. The Contractor shall be responsible for the maintenance and testing of each activated system thereafter. The Contracting Officer issue task orders for each activation required.

The Contractor shall provide initial training to the occupants of the residence in English; in addition the Contractor shall provide an Instruction Manual in English concerning the basic operation of the alarm system.

The Contractor shall provide, install, and activate new electronic alarm systems in various apartments and residences which vary in sizes. The apartment sizes shall be as follows:

Apartment 2-bed rooms has an average of two doors and 12 windows Apartment 3-bed rooms has an average of two doors and 15 windows Townhouse 5-bed rooms has an average of two doors and 21 windows Alarm systems shall consist of the following components, in designated one-floor residences on the main access floor only (in multi-floored houses, including those with basements, the Contractor shall alarm all accessible windows and doors:

Central alarm panel must be able to support with the following:

· Minimum of 3 programmable 5 zones

· Up to 30 sensors

· Wired and wireless door/window contacts and Passive Infra-Red (PIR) sensors

· Connected to the internet both by wire and wireless connection

· General Packet Radio (GPRS) connectivity

· Ability to program PIR and door/window sensors to report two-zone alarm activation

· Transmission of video feeds

· Two (2) LED key pads

· Radio reporting

· Electrical connection

· Battery back-up (24-hours minimum capacity)

· Glass break sensors

· PIR Infra-red detectors/radar motion detectors, magnetic contact sensors, pet immune motion sensors

· Hard wired and hand-held panic alarm buttons,

· All necessary wiring and cabling

· Wireless Smoke detectors

· Wireless carbon monoxide sensor

· One (1) interior and one (1) exterior strobe light

Task orders will be issued for each installation required.

The Contractor shall not install more than the maximum number of sensors (6) without the specific approval by the COR. The Contractor will furnish and perform all cabling in such a way as to cause as little damage and visible disruption to the residence interior as possible. The Contractor shall fit all cabling into new or existing panduit.

The Contractor shall rely on its professional judgment in determining the number and the placement of the above detection components, and the way the cabling is routed, but will assure intrusion detection at any location. However, if during the performance acceptance inspection by the COR it is found that, due to a misjudgment by the Contractor, the installation shows weak spots where the intended security of a location is compromised, the COR shall have the right to request the Contractor to move the placement of any alarm system component installed by the Contractor until satisfactory security coverage is reached, without extra cost to the Government.

Each installation will be followed by a complete testing of the system, including a test of each system component, by the Contractor. The Contractor shall be responsible for the maintenance of each installed system thereafter. The Contractor shall replace inoperable alarms within twelve (12) hours from when the test is completed. If the Contractor needs to deviate from the twelve (12) hour requirement, the request for deviation shall be in writing to the COR for approval and shall be of no cost to the USG.

The Contractor shall provide initial training to the occupants of the residence in English; in addition the Contractor shall provide an Instruction Manual in English concerning the basic operation of the alarm system.

The Contractor shall conduct bi-annual visits to each residence to train residents in English on alarm system functionality and operation. The Contractor shall perform yearly maintenance of the alarm systems, to include the replacement of all batteries.

1.3.2. ACCESS

The Contractor shall ask the COR in writing for permission to access properties covered under this contract, for the purpose of routine maintenance at least one (1) week in advance. The Contractor may make oral emergency requests followed up by a written request on the next business day. The Contractor shall not make requests for access for routine maintenance directly to the resident.

1.3.3. TYPE OF EQUIPMENT

The Contractor shall propose and furnish only equipment that is adequate to complete performance under this contract.

1.3.4. INSTALLATION WARRANTY

The Contractor shall warrant all the systems furnished and installed by the Contractor against troubleshooting as a result of faulty or inappropriate installation. The Contractor shall correct any such faults without charge to the Government during the term of this contract.

1.3.5. OPERATION INSTRUCTIONS BOOKLET

Upon each installation the Contractor shall provide to the resident an operation instructions booklet in the English language with instructions on how to activate/deactivate and reset the alarm system, and how to input the secret keypad code.

1.3.6. SCHEMATICS/DIAGRAMS

The Contractor shall provide to the COR an alarm schematic/diagram for each residence, detailing where, and what type of sensors have been installed, within ten (10) days of installation.

1.4. REMOVAL OF EXISTING ALARM SYSTEMS

When directed by the Contracting Officer, the Contractor shall remove alarm systems in designated apartments and residences, to include removal of all cabling. The Contractor shall use maximum care as to cause minimal damage to the building while removing the alarms and cabling.

2.2. Installation of New Alarm Systems: Each individual newly installed alarm system must be completed, made operational and tested within maximum one (1) working day (8:00-18:00).

2.3. Individual appointments with residents for the activation of existing alarms and for the installation of new alarm systems will be made by the COR. The COR will give the Contractor a task order with at least five (5) working days’ notice before each individual installation/activation appointment.

2.4 DELIVERY SCHEDULE

The following items shall be delivered under this contract:

2.5 PERIOD OF PERFORMANCE

The contract shall be effective as from the date of Notice to Proceed and shall remain in effect for twelve (12) months, with four (4) option years in accordance with FAR 52.217-9.

The Contracting Officer may also extend this contract for an additional six (6) months, if required by the Government, in accordance with the FAR clause 52.217-8 OPTION TO EXTEND SERVICES, in SECTION 2 of this contract.

3. TASK ORDERS

The Contracting Officer will issue task orders to the Contractor to perform any work under this contract. If a task is given orally, it will be followed up by a written task order within two (2) days of the oral order. All task orders will be in written form, state the manner of the work to be performed, and have an issue date and a date by which the work is to be completed.

4. PROJECT MANAGEMENT AND SUPERVISION

In view of the importance of this project, the Contractor shall assign a specific project manager who will be the direct liaison with the COR concerning all work related to this contract. It will be the project manager’s task to direct, schedule, supervise, inspect and test the work under this contract, and to receive instructions from the COR. The Contractor’s project manager shall be able to speak and understand the English language at Level 2. Level 2 is defined as being able to verbally satisfy routine demands and limited work requirements, and being able to comprehend simple written material on subjects within a familiar context.

Quality control shall be the responsibility of the Contractor. The Contractor shall perform inspection visits to the work site on a regular basis. These visits shall be coordinated with the COR, but shall be surprise inspections to those working on the contract.

5. COVERAGE DURING EXTENDED POWER OUTAGES

If power outages last longer than the alarm system’s reserve battery power, the Contractor shall coordinate with the COR to provide additional reserve battery power until power is restored.

The CMS system shall provide a hardcopy record of each alarm activation to include the residence (by code), the date and time of activation, and the resolution of alarm situation. The Contractor shall provide these reports to the COR within 24 hours of the activation report.

The Contractor shall not subcontract any work to be performed without the express consent of the Contracting Officer.

8. DEFINITIONS

“Central Processor/Control Box” is a unit that receives and analyzes input from the sensors installed in various zones being protected and communicates via the radio transmitter to the Central Alarm Monitoring System (CAMS) located at a base operations center.

“Keypad” is a component used to activate, deactivate, and program the alarm system. Commands are entered by pressing various buttons on the unit.

“Transmitter” is the primary transmitter that establishes a radio signal link for communication between the control box and the CAMS at the base operations center.

“Receiver” is the component which receives signals from the wireless alarm sensors/transmitters and relays data to the control box for processing.

“Door/Window Contact Sensors” are magnetic-type sensors that are mounted on windows and doors to signal when they have been opened.

“Motion Sensors” are sensors which utilize one or a combination of several different technologies to detect the motion of an intruder and signal his/her presence in a protected zone. Common technologies used include employment of passive infrared (PIR) and/or microwave signals.

“Hand-Held Panic Alert Buttons” are small, remote-control-type units that can be carried on one’s person in or near the protected property. In case of an emergency, the button can be pressed to signal for assistance from a React Team.

“Interior Siren” is an audible alarm positioned inside the protected property to alert the occupants to an alarm condition.

“Exterior Siren” consist of an audible alarm which is mounted on the exterior of the protected property. When activated they clearly signal to neighbors, passersby, or responding authorities that an apparent unauthorized entry is in progress and may also deter an intruder from continuing illegal activity and cause them to flee.

“Panduit” means the cable ties that are used to secure the cabling and wiring to the interior and exterior walls.

“U.S. Embassy” and “Embassy” mean the diplomatic or consular mission of the United States of America for which services are provided under this contract.

“Department” means the Department of State, including all of its activities wherever located.

“Government” means the Government of the United States of America unless specifically stated otherwise.

9. INSPECTION BY GOVERNMENT:

The services and the supplies furnished will be inspected from time to time by the COR, or his/her authorized representatives, to determine that all work is being performed in a satisfactory manner, and that all supplies are of acceptable quality and standards.

The Contractor shall be responsible for any countermeasures or corrective action, within the scope of this contract, which may be required by the Contracting Officer as a result of such inspection.

9.1 QUALITY ASSURANCE AND SURVEILLANCE PLAN (QASP)

This plan provides an effective method to promote satisfactory contractor performance. The QASP provides a method for the Contracting Officer's Representative (COR) to monitor Contractor performance, advise the Contractor of unsatisfactory performance, and notify the Contracting Officer of continued unsatisfactory performance. The Contractor, not the Government, is responsible for management and quality control to meet the terms of the contract. The role of the Government is to monitor quality to ensure that contract standards are achieved.

Services Performs all alarm services set forth in the scope of work.

1. thru 6.

All required services are performed and no more than one (1) customer complaint is received per month.

9.1.2 SURVEILLANCE

The COR will receive and document all complaints from Government personnel regarding the services provided. If appropriate, the COR will send the complaints to the Contractor for corrective action.

9.1.3 STANDARD

The performance standard is that the Government receives no more than one (1) customer complaint per month. The COR shall notify the Contracting Officer of the complaints so that the Contracting Officer may take appropriate action to enforce the inspection clause (FAR 52.246-4, Inspection of Services – Fixed Price (AUG 1996)), if any of the services exceed the standard.

General - The Government reserves the right to deny access to U.S.-owned and U.S.-operated facilities to any individual. The Government will run background checks on all proposed Contractor employees. The Contractor shall provide the names, biographic data and police clearance on all Contractor personnel who shall work on this contract.

Identity Cards - The Government shall issue identity cards to Contractor personnel, after they are approved. Contractor personnel shall display identify card(s) on the uniform at all times while providing services under this contract. These identity cards are the property of the Government. The Contractor is responsible for their return at the end of the contract, when an employee leaves Contractor service, or at the request of the Government.

· Falsification or unlawful concealment, removal, mutilation, or destruction of any official documents or records or concealment of material facts by willful omission from official documents or records;

· Unauthorized use of Government property, theft, vandalism, or immoral conduct;

· Unethical or improper use of official authority or credentials;

· Security violations; or,

· Organizing or participating in gambling in any form.

(f) Key Control. The Contractor shall receive, secure, issue and account for any keys issued for access to buildings, offices, equipment, gates, etc., for the purposes of this contract. The Contractor shall not duplicate keys without the COR's approval. Where it is determined that the Contractor or its agents have duplicated a key without permission of the COR, the Contractor shall remove the individual(s) responsible from this contract. If the Contractor has lost any such keys, the Contractor shall immediately notify the COR. In either event, the Contractor shall reimburse the Government for the cost of rekeying that portion of the system.

All employees shall be in good general health without physical disabilities that would interfere with acceptable performance of their duties. All employees shall be free from communicable diseases.

General Liability

(1) Bodily Injury, On or Off the Site, in Euros

(2) Property Damage, On or Off the Site, in Euros

The types and amounts of insurance are the minimums required. The Contractor shall obtain any other types of insurance required by local law or that are ordinarily or customarily obtained in the location of the work. The limit of such insurance shall be as provided by law or sufficient to meet normal and customary claims.

For those Contractor employees assigned to this contract who are either United States citizens or hired in the United States or its possessions, the Contractor shall provide workers' compensation insurance in accordance with FAR 52.228-3.

The Contractor agrees that the Government shall not be responsible for personal injuries or for damages to:

(a) Any property of the Contractor,

(b) Its officers,

(c) Agents,

(d) Servants,

(e) Employees, or

(f) Any other person, arising from, and incidental to, the Contractor's performance of this contract.

The Contractor shall hold harmless and indemnify the Government from any and all claims arising, except in the instance of gross negligence on the part of the Government.

The Contractor shall obtain adequate insurance for damage to, or theft of, materials and equipment in insurance coverage for loose transit to the site or in storage on or off the site.

14. ORDERING OFFICIAL

The designated ordering individual under FAR 52.216-18 is the Contracting Officer.

15. CERTIFICATE OF INSURANCE

The Contractor shall furnish to the Contracting Officer a current certificate of insurance as evidence of the insurance required. In addition, the Contractor shall furnish evidence of a commitment by the insurance carrier to notify the Contracting Officer in writing of any material change, expiration or cancellation of any of the insurance policies required not less than thirty (30) days before it is effective. When coverage is provided by self-insurer, the Contractor shall not change or decrease the coverage without the Contracting Officer's approval.

16. LIST OF ATTACHMENTS

EXHIBIT A – CONTRACTOR FURNISHED MATERIALS

EXHIBIT B – GOVERNMENT FURNISHED PRPOPERTY

EXHIBIT C - RESIDENCES

EXHIBIT A - CONTRACTOR FURNISHED MATERIALS

The Contractor shall provide all equipment, materials, and supplies required to perform. Such items include, but are not limited to:

· Central Alarm Monitoring System using radio signals with repeaters (not telephone lines)

· LED key pads

· Radios

· Electrical connections

· Long-life lithium battery back-ups for when power outages occur with replacements (24 hours minimum capacity)

· Glass break sensors

· PIR Infra-red detectors/radar motion detectors, magnetic contact sensors, pet immune motion sensors. (Window/door magnetic contact sensors or motion detectors)

· Hard wired and hand-held panic alarm buttons,

· All necessary wiring and cabling

· Wireless Smoke detectors

· Wireless carbon monoxide sensor

· One (1) interior siren and one (1) exterior strobe

· Central alarm panels with maximum 5 or 6 zones (maximum one alarm per zone only)

· Sirens

· Operating instructions in English

· Alarm schematic/diagrams

· Command CFR

The Contractor shall maintain sufficient spare parts, etc., for all Contractor-furnished materials to ensure uninterrupted services.

EXHIBIT B - GOVERNMENT FURNISHED PROPERTY

NONE

EXHIBIT C - RESIDENCES

The Hague 33 each 14 four/five bedroom houses, typically townhouses. Approximately only 3 detached properties in The Hague.

19 two bedroom apartments.

Wassenaar 53 each 2 three bedroom apartments.

50 four/five bedroom houses, typically townhouses. Approximately only 6 detached properties in Wassenaar.

Rotterdam 2 each 2 two bedroom apartments.

Amsterdam 5 each 5 two/three bedroom apartments.

Amstelveen 5 each 5 four/five bedroom houses, typically townhouses.

· The actual address of the residences will be provided to contractor after contract award.

· Above are the apartments/townhouses the Government owns/leases at this moment. The government anticipates leasing more apartment/townhouses in the future.

SECTION 2 - CONTRACT CLAUSES

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

(1) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015)

(2) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(3) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the contracting officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial items:

[Contracting Officer check as appropriate.] ___ (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Sept 2006), with Alternate I (Oct 1995) (41 U.S.C. 4704 and 10 U.S.C. 2402).

___ (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Oct 2015) (41 U.S.C. 3509).

___ (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub L. 111-5) (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009).

___ (4) 52.204-10, Reporting Executive compensation and First-Tier Subcontract Awards (Oct 2015) (Pub. L. 109-282) (31 U.S.C. 6101 note).

___ (5) [Reserved] ___ (6) 52.204-14, Service Contract Reporting Requirements (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Jan 2014) (Pub. L. 111-117, section 743 of Div. C).

___ (8) 52.209-6, Protecting the Government’s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Oct 2015) (31 U.S.C. 6101 note).

___ (9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Jul 2013) (41 U.S.C. 2313).

___ (10) [Reserved] ___ (11) (i) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Nov 2011) (15 U.S.C. 657a).

___ (ii) Alternate I (Nov 2011) of 52.219-3.

___ (12) (i) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2014) (if the offeror elects to waive the preference, it shall so indicate in its offer)(15 U.S.C. 657a).

___ (ii) Alternate I (Jan 2011) of 52.219-4.

___ (13) [Reserved] ___ (14) (i) 52.219-6, Notice of Total Small Business Aside (Nov 2011) (15 U.S.C. 644).

___ (ii) Alternate I (Nov 2011).

___ (iii) Alternate II (Nov 2011).

___ (15) (i) 52.219-7, Notice of Partial Small Business Set-Aside (June 2003) (15 U.S.C. 644).

___ (ii) Alternate I (Oct 1995) of 52.219-7.

___ (iii) Alternate II (Mar 2004) of 52.219-7.

___ (16) 52.219-8, Utilization of Small Business Concerns (Oct 2014) (15 U.S.C. 637(d)(2) and (3)).

___ (17) (i) 52.219-9, Small Business Subcontracting Plan (Oct 2015) (15 U.S.C. 637 (d)(4)).

___ (ii) Alternate I (Oct 2001) of 52.219-9.

___ (iii) Alternate II (Oct 2001) of 52.219-9.

___ (iv) Alternate III (Oct 2015) of 52.219-9.

___ (18) 52.219-13, Notice of Set-Aside of Orders (Nov 2011) (15 U.S.C. 644(r)).

___ (19) 52.219-14, Limitations on Subcontracting (Nov 2011) (15 U.S.C. 637(a)(14)).

___ (20) 52.219-16, Liquidated Damages—Subcontracting Plan (Jan 1999) (15 U.S.C. 637(d)(4)(F)(i)).

___ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Nov 2011) (15 U.S.C. 657f).

___ (22) 52.219-28, Post Award Small Business Program Rerepresentation (Jul 2013) (15 U.S.C. 632(a)(2)).

___ (23) 52.219-29, Notice of Set-Aside for, or Sole Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Dec 2015) (15 U.S.C. 637(m)).

___ (24) 52.219-30, Notice of Set-Aside for, or Sole Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Dec 2015) (15 U.S.C. 637(m)).

___ (25) 52.222-3, Convict Labor (June 2003) (E.O. 11755).

___ (26) 52.222-19, Child Labor—Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126).

___ (27) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

___ (28) 52.222-26, Equal Opportunity (Apr 2015) (E.O. 11246).

___ (29) 52.222-35, Equal Opportunity for Veterans (Oct 2015) (38 U.S.C. 4212).

___ (30) 52.222-36, Equal Opportunity for Workers with Disabilities (Jul 2014) (29 U.S.C. 793).

___ (31) 52.222-37, Employment Reports on Veterans (Feb 2016) (38 U.S.C. 4212).

___ (32) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 2010) (E.O. 13496).

___ (33) (i) 52.222-50, Combating Trafficking in Persons (Mar 2015) (22 U.S.C. chapter 78 and E.O. 13627).

___ (ii) Alternate I (Mar 2015) of 52.222-50, (22 U.S.C. chapter 78 and E.O. 13627).

___ (34) 52.222-54, Employment Eligibility Verification (Oct 2015). (E. O. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial items as prescribed in 22.1803.)

___ (35) (i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (May 2008) (42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (ii) Alternate I (May 2008) of 52.223-9 (42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

___ (36) (i) 52.223-13, Acquisition of EPEAT® -Registered Imaging Equipment (Jun 2014) (E.O.s 13423 and 13514 ___ (ii) Alternate I (Oct 2015) of 52.223-13.

___ (37) (i) 52.223-14, Acquisition of EPEAT® -Registered Television (Jun 2014) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-14.

___ (38) 52.223-15, Energy Efficiency in Energy-Consuming Products (Dec 2007) (42 U.S.C. 8259b).

___ (39) (i) 52.223-16, Acquisition of EPEAT® -Registered Personal Computer Products (Oct 2015) (E.O.s 13423 and 13514).

___ (ii) Alternate I (Jun 2014) of 52.223-16.

___ (40) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513).

___ (41) 52.225-1, Buy American--Supplies (May 2014) (41 U.S.C. chapter 83).

___ (42) (i) 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act (May 2014) (41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, and 112-43).

___ (ii) Alternate I (May 2014) of 52.225-3.

___ (iii) Alternate II (May 2014) of 52.225-3.

___ (iv) Alternate III (May 2014) of 52.225-3.

___ (43) 52.225-5, Trade Agreements (Feb 2016) (19 U.S.C. 2501, et seq., 19 U.S.C. 3301 note).

___ (44) 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008) (E.O.’s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

___ (45) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Jul 2013) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; 10 U.S.C. 2302 Note).

___ (46) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (Nov 2007) (42 U.S.C. 5150).

___ (47) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (Nov 2007) (42 U.S.C. 5150).

___ (48) 52.232-29, Terms for Financing of Purchases of Commercial Items (Feb 2002) (41 U.S.C. 4505), 10 U.S.C. 2307(f)).

___ (49) 52.232-30, Installment Payments for Commercial Items (Oct 1995) (41 U.S.C. 4505, 10 U.S.C. 2307(f)).

___ (50) 52.232-33, Payment by Electronic Funds Transfer— System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (51) 52.232-34, Payment by Electronic Funds Transfer—Other Than System for Award Management (Jul 2013) (31 U.S.C. 3332).

___ (52) 52.232-36, Payment by Third Party (May 2014) (31 U.S.C. 3332).

___ (53) 52.239-1, Privacy or Security Safeguards (Aug 1996) (5 U.S.C. 552a).

___ (54) (i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (Feb 2006) (46 U.S.C. Appx 1241(b) and 10 U.S.C. 2631).

___ (ii) Alternate I (Apr 2003) of 52.247-64.

(c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or executive orders applicable to acquisitions of commercial items:

___ (1) 52.222-17, Nondisplacement of Qualified Workers (May 2014) (E.O. 13495) ___ (2) 52.222-41, Service Contract Labor Standards (May 2014) (41 U.S.C. chapter 67.).

___ (3) 52.222-42, Statement of Equivalent Rates for Federal Hires (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (4) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (Multiple Year and Option Contracts) (May 2014) (29 U.S.C.206 and 41 U.S.C. chapter 67).

___ (5) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards -- Price Adjustment (May 2014) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

___ (6) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (7) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67).

___ (8) 52.222-55, Minimum Wages Under Executive Order 13658 (Dec 2015) (E.O. 13658).

___ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (May 2014) (42 U.S.C. 1792).

___ (10) 52.237-11, Accepting and Dispensing of $1 Coin (Sep 2008) (31 U.S.C. 5112(p)(1)).

(d) Comptroller General Examination of Record The Contractor shall comply with the provisions of this paragraph (d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, and does not contain the clause at…