Shipping Container Salient - Model I for CLIN 0001.pdf
PDF 122 KB Posted
- Attached to
- CONEX BOX Federal contract opportunity
- Solicitation number
- SPMYM2-21-Q-1737
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SOLICITATION SPMYM2-21-Q-1737 (CONEX BOX).pdf | ||
| Conex Box Layout I for CLIN 0001.pdf | ||
| Conex Box Salient Requirements A for CLIN 0002.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SHIPPING CONTAINER SALIENT REQUIREMENTS
20FT CONEX BOX LAYOUT – MODEL: I
- 8FT WIDTH x 20FT LENGTH x 8.5FT HEIGHT ISO STANDARD STEEL CONTAINER.
- FORKLIFT POCKETS ON ALL SIDES.
- CARGO DOORS ON ONE 8FT END.
- 36 X 79 INCH PERSONNEL DOOR WITH WEATHER SEAL AND RAIN DRIP ON 8FT SIDE
OPPOSITE CARGO DOORS WITH THE FOLLOWING CIPHER LOCK:
o Part # 1041B26D41 - Kaba Simplex, Knob Mechanical Pushbutton Lock.
o Part # 1C7A1626 - Best 1C standard core, 7 pin A keyway, uncombinated, 626 finish.
- THRU WALL HVAC, WITH THERMOSTAT, APPROXIMATELY 12,000 BTU AIR
CONDITIONING AND 10,600 BTU HEAT TO PLUG INTO DEDICATED AND ADJACENT 20
AMP RECEPTACLE. HVAC TO BE INSTALLED ON 8FT SIDE NEXT TO MAN DOOR. THE
HVAC UNIT SHOULD BE AN ENERGY STAR RATED HEAT PUMP WITH MINIMUM EER od 11.
- 2 INCH THREADED PIPE PENETRATION CAPPED FROM THE OUTSIDE TO BE INSTALLED
ABOVE HVAC.
- 100 AMP ELECTRICAL PANEL INSTALLED BELOW HVAC.
- 25FT POWER CORD WITH NO PLUG (BARE WIRE).
- LIGHT TAN EXTERIOR COLOR.
- INTERIOR TO BE PAINTED WHITE.
- (4) - 110 VOLT QUAD GFCI OUTLETS.
- R-7 INSULATION INSTALLED THROUGHOUT.
- (2) HARDWIRED LED FLUORESCENT LIGHTS CONTROLLED BY (1) SWITCH ADJACENT TO
MAN DOOR.
- 7/16 INCH OSB OR EQUIVALENT TO COVER INSULATION AND WIRING.
- All PENETRATIONS TO BE SEALED AND WATERTIGHT.
File details come from the government source that posted it. Updated .