AF_SBIR_243_PhaseI_v2.pdf
PDF 354 KB Posted
- Solicitation number
- SF243-0001
About this file
This document is the Department of the Air Force's Phase I Proposal Submission Instructions for the 24.3 Small Business Innovation Research (SBIR) program. The instructions clarify DoD Broad Agency Announcement (BAA) requirements specific to Air Force topics and direct offerors to submit proposals electronically via the Defense SBIR/STTR Innovation Portal (DSIP) by the stated proposal submission deadline. All Phase I efforts must address feasibility of solutions to selected topics, with a maximum contract value of $180,000 and a six-month duration limit. Proposals exceeding these limits will be disqualified. The Air Force anticipates evaluation and selection completion within approximately 90 calendar days of solicitation close. Contact information for general inquiries, DSIP system questions, and technical matters is provided through the AF SBIR/STTR One Help Desk (usaf.team@afsbirsttr.us), the DoD SBIR/STTR Help Desk (dodsbirsupport@reisystems.com), and the Air Force SBIR/STTR Contracting Officer, Mr. Daniel J. Brewer (Daniel.Brewer.13@us.af.mil).
Phase I proposals must include seven volumes: (1) DoD Proposal Cover Sheet with technical abstract containing no proprietary information; (2) Technical Volume (maximum 20 pages, 10-point font, one-inch margins) detailing key personnel with citizenship information, Phase I Statement of Work outline with scope, task outline, milestone schedule, deliverables, progress reports, and final report requirements; (3) Cost Volume itemizing direct materials, other direct costs, direct labor, travel, subcontracts, special tooling/equipment, and consultants (with subcontract costs capped at one-third of total contract price excluding profit); (4) Company Commercialization Report; (5) Supporting Documents including DD Form 2345 for export-controlled topics, verification of small business joint venture eligibility, and technical data rights assertions; (6) Fraud, Waste, and Abuse Training certification completed prior to submission; and (7) Disclosures of Foreign Affiliations or Relationships to Foreign Countries webform. For export-controlled topics (AF242-0010 and AF242-0011), certified DD Form 2345 must accompany initial proposal submission or proposals will be disqualified. All R&D work must be performed in the United States, with a minimum of two-thirds performed by the awardee (measured by direct and indirect costs excluding profit). Deviation requests must be submitted twice: prior to proposal submission during the topic open period and within the initial proposal. The Air Force conducts due diligence reviews assessing cybersecurity practices, patent analysis, employee analysis, and foreign ownership; proposals may be rejected based on identified security risks. Small business concerns owned in majority by multiple venture capital operating companies, hedge funds, or private equity funds are ineligible. The document includes four Phase I topics (SF243-0001 through SF243-0004) covering neuromorphic sensor data fusion and tracking, infrared spectral focal plane arrays for spectroscopy, reentry event detection and impact prediction, and responsible space behavior event classification, all restricted under ITAR/EAR with foreign national disclosure requirements.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SF243-0001.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Version 2
DEPARTMENT OF THE AIR FORCE
24.3 SMALL BUSINESS INNOVATION RESEARCH (SBIR) PHASE I
PROPOSAL SUBMISSION INSTRUCTIONS
The Air Force intends these Phase I proposal submission instructions to clarify the Department of Defense (DoD) Broad Agency Announcement (BAA) as it applies to the topics solicited herein.
Offerors must ensure proposals meet all requirements of the SBIR 24.3 BAA posted on the Defense SBIR/STTR Innovation Portal (DSIP) at the proposal submission deadline date/time.
Applicants are encouraged to thoroughly review the DoD Program BAA and register for the DSIP Listserv to remain apprised of important programmatic and contractual changes.
• Full component-specific instructions and topic descriptions are available on DSIP at https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations. Be sure to select the tab for the appropriate BAA cycle.
Please ensure all e-mail addresses listed in the proposal are current and accurate. The DAF is not responsible for ensuring notifications are received by firms changing mailing address/e-mail address/company points of contact after proposal submission without proper notification to the DAF. If changes occur to the company mail or email addresses or points of contact after proposal submission, the information must be provided to the AF SBIR/STTR One Help Desk. The message shall include the subject line, “24.3 Address Change”.
Points of Contact:
General information related to the AF SBIR/STTR program and proposal preparation instructions, contact the AF SBIR/STTR One Help Desk at usaf.team@afsbirsttr.us. All applicants have ample opportunity to request clarifying information. The DAF encourages applicants to request clarifying information as early as possible, as delays in such requests constrain the DAF’s ability to provide satisfactory resolution to applicant concerns.
• Questions regarding the DSIP electronic submission system, contact the DoD SBIR/STTR Help Desk at dodsbirsupport@reisystems.com.
• For technical questions about the topics during the pre-announcement and open period, please reference the DoD SBIR 24.3 BAA.
• Air Force SBIR/STTR Contracting Officer (CO):
o Mr. Daniel J. Brewer, Daniel.Brewer.13@us.af.mil
General information related to the AF Small Business Program can be found at the AF Small Business website, http://www.airforcesmallbiz.af.mil/. The site contains information related to contracting opportunities within the AF, as well as business information and upcoming outreach events. Other informative sites include those for the Small Business Administration (SBA), www.sba.gov, and the Procurement Technical Assistance Centers (PTACs), http://www.aptacus.us.org. These centers provide Government contracting assistance and guidance to small businesses, generally at no cost.
PHASE I PROPOSAL SUBMISSION
The DoD SBIR 24.3 Broad Agency Announcement, https://www.dodsbirsttr.mil/submissions/login, includes all program requirements. Phase I efforts should address the feasibility of a solution to the selected topic’s requirements.
PHASE I PROPOSAL FORMAT
Complete proposals must include all of the following:
https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations mailto:usaf.team@afsbirsttr.us mailto:dodsbirsupport@reisystems.com http://www.airforcesmallbiz.af.mil/ http://www.sba.gov/ http://www.aptacus.us.org/
Volume 1: DoD Proposal Cover Sheet Note: If selected for funding, the proposal’s technical abstract and discussion of anticipated benefits will be publicly released. Therefore, do not include proprietary information in this section.
Volume 2: Technical Volume Volume 3: Cost Volume Volume 4: Company Commercialization Report Volume 5: Supporting Documents Volume 6: Fraud, Waste, and Abuse Training Volume 7: Disclosures of Foreign Affiliations or Relationships to Foreign Countries
DoD PROPOSAL COVER SHEET (VOLUME 1) Complete the proposal Cover Sheet in accordance with the instructions provided via DSIP. The technical abstract should include a brief description of the program objective(s), a description of the effort, anticipated benefits and commercial applications of the proposed research, and a list of key words/terms. The technical abstract of each successful proposal will be submitted to the Office of the Secretary of Defense (OSD) for publication and, therefore, must not contain proprietary or classified information.
TECHNICAL VOLUME (VOLUME 2):
The Technical Volume should include all graphics and attachments but should not include the Cover Sheet, which is completed separately as Volume 1. The Phase I technical volume (uploaded in Volume 2) shall contain the required elements found below. Ensure that all graphics are distinguishable in black and white.
The Phase I Technical Volume page/slide limits identified for the topics do not include the Cover Sheet, Cost Volume, Cost Volume Itemized Listing (a-h). The Technical Volume must be no smaller than 10-point on standard 8-1/2" x 11" paper with one-inch margins. Only the Technical Volume and any enclosures or attachments count toward the page limit. In the interest of equity, pages/slides in excess of the stated limits will not be reviewed. The documents required for upload into Volume 5, “Other”, do not count toward the specified limits.
All topics in these Phase I instructions have a Volume 2 page limit of 20 pages, not inclusive of other items discussed above. All topics listed in these Phase I instructions have a duration limit of six (6) months. Any proposals that exceed this duration will be disqualified. All topics listed have a maximum value of $180,000.00. Proposals that exceed this value will be disqualified.
These instructions supplement the 24.3 SBIR BAA. In addition to the requirements found in the 24.3 SBIR BAA, applicants are required to provide the following information in Volume 2:
Key Personnel: Identify in the Technical Volume all key personnel who will be involved in this project;
include information on directly related education, experience, and citizenship.
• A technical resume of the principal investigator, including a list of publications, if any, must be included. Only one principal investigator/project manager can be designated to a proposal at any given time.
• Concise technical resumes for subcontractors and consultants, if any, are also useful.
• Identify all U.S. permanent residents to be involved in the project as direct employees, subcontractors, or consultants.
• Identify all non-U.S. citizens expected to be involved in the project as direct employees, subcontractors, or consultants. For all non-U.S. citizens, in addition to technical resumes, please provide countries of origin, the type of visa or work permit under which they are performing and an explanation of their anticipated level of involvement on this project, as appropriate. Additional information may be requested during negotiations in order to verify the foreign citizen’s eligibility to participate on a contract issued as a result of this announcement. Note: Do not upload information such as Permanent Resident Cards (Green Cards), birth certificates, Social Security Numbers, or other PII to the DSIP system.
Phase I Statement of Work Outline NOTE: The DAF uses the work plan outline as the initial draft of the Phase I Statement of Work (SOW).
Therefore, do not include proprietary information in the work plan outline. To do so will necessitate a request for revision, if selected, and may delay award.
Include a work plan outline in the following format:
Scope: List the effort’s major requirements and specifications.
Task Outline: Provide a brief outline of the work to be accomplished during the Phase I effort.
Milestone Schedule Deliverables Progress reports Final report with SF 298
COST VOLUME (VOLUME 3)
All topics listed in these Phase I instructions have a maximum value of $180,000.00. Proposals that exceed this amount will be disqualified.
Cost information should be provided by completing the Cost Volume in DSIP and including the Cost Volume Itemized Listing specified below. The Cost Volume detail must be adequate to enable Air Force personnel to determine the purpose, necessity and reasonability of each cost element. Provide sufficient information (a.-g. below) regarding funds use. The DSIP Cost Volume and Itemized Cost Volume Information will not count against the specified page limit. The itemized listing also may be submitted in Volume 5 under the “Other” dropdown option.
a. Direct Cost Materials: Justify costs for materials, parts, and supplies with an itemized list containing types, quantities, prices and where appropriate, purpose. Material costs may include the costs of such items as raw materials, parts, subassemblies, components, and manufacturing supplies.
b. Other Direct Costs: This category includes, but is not limited to, specialized services such as machining, milling, special testing or analysis, and costs incurred in temporarily using specialized equipment. Proposals including leased hardware must include an adequate lease v. purchase justification.
c. Direct Labor: Identify key personnel by name, if possible, or by labor category, if not. Direct labor hours, labor overhead and/or fringe benefits, and actual hourly rates for each individual are also necessary for the CO to determine whether these hours, fringe rates, and hourly rates are fair and reasonable.
d. Travel: Travel costs must relate to project needs. Break out travel costs by trip, number of travelers, airfare, per diem, lodging, etc. The number of trips required, as well as the destination and purpose of each, should be reflected. Recommend budgeting at least one trip to the Air Force location managing the contract.
e. Subcontracts: Involvement of university or other consultants in the project’s planning and/or research stages may be appropriate. If so, describe in detail and include information in the Cost Volume. The proposed total of consultant fees, facility lease/usage fees, and other subcontract or purchase agreements may not exceed one-third of the total contract price or cost (do not include profit in the calculation), unless otherwise approved in writing by the CO. The SBIR funded work percentage calculation considers both direct and indirect costs after removal of the SBC’s proposed profit. Support subcontract costs with copies of executed agreements. The documents must adequately describe the work to be performed. At a minimum, include a Statement of Work (SOW) with a corresponding detailed Cost Volume for each planned subcontract.
f. Special Tooling, Special Test Equipment, and Material: The inclusion of equipment and materials will be carefully reviewed relative to need and appropriateness to the work proposed. Special tooling and special test equipment purchases must, in the CO’s opinion, be advantageous to the Government and relate directly to the effort. These toolings or equipment should not be of a type that an offeror would otherwise possess in the normal course of business. These may include items such as innovative instrumentation and/or automatic test equipment.
g. Consultants: Provide a separate agreement letter for each consultant. The letter should briefly state what service or assistance will be provided, the number of hours required, and the hourly rate.
NOTE: If no exceptions are taken to an offeror’s proposal, the Government may award a contract without negotiations. Therefore, the offeror’s initial proposal should contain the offeror’s best terms from a cost or price and technical standpoint. If there are questions regarding the award document, contact the Phase I CO identified on the cover page. The Government reserves the right to reopen negotiations later if the CO determines doing so to be necessary.
COMPANY COMMERCIALIZATION REPORT (VOLUME 4)
Completion of the CCR as Volume 4 of the proposal submission in DSIP is required. Please refer to the DoD SBIR 24.3 BAA for full details on this requirement. Information contained in the CCR will not be considered by the Air Force during proposal evaluations.
SUPPORTING DOCUMENTS VOLUME (VOLUME 5)
The following documents may be required if applicable to your proposal:
1. DD Form 2345: For proposals submitted under export-controlled topics, either International
Traffic in Arms or Export Administration Regulations (ITAR/EAR), a copy of the certified DD Form 2345, Militarily Critical Technical Data Agreement, or evidence of application submission must be included. The form, instructions, and FAQs may be found at the United States/Canada Joint Certification Program website, http://www.dla.mil/HQ/InformationOperations/Offers/Products/LogisticsApplications/JCP/DD23 45Ins tructions.aspx. DD Form 2345 approval will be required if proposal if selected for award.
a. Topics AF242-0010, AF242-0011 ONLY: the certified and completed DD Form 2345, Military Critical Technical Data Agreement, must be included with the initial proposal submission. Proposals that do not include this document will be disqualified..
2. Verification of Eligibility of Small Business Joint Ventures (Attachment 3 to the DOD SBIR 24.3
BAA)
3. Technical Data Rights Assertions (if asserting data rights restrictions)
FRAUD, WASTE, AND ABUSE TRAINING (VOLUME 6)
Note that the FWA Training must be completed prior to proposal submission. When training is complete and certified, DSIP will indicate completion of the Volume 6 requirement. The proposal cannot be submitted until the training is complete.
DISCLOSURES OF FOREIGN AFFILIATIONS OR RELATIONSHIPS TO FOREIGN
COUNTRIES (VOLUME 7)
Small business concerns must complete the Disclosures of Foreign Affiliations or Relationships to Foreign Countries webform in Volume 7 of the DSIP proposal submission. Please be aware that the Disclosures of Foreign Affiliations or Relationships to Foreign Countries WILL NOT be accepted as a PDF Supporting Document in Volume 5 of the DSIP proposal submission. Do not upload any previous versions of this form to Volume 5. For additional details, please refer to the DoD SBIR Program BAA.
DISCRETIONARY TECHNICAL AND BUSINESS ASSISTANCE (TABA)
The Air Force does not participate in the Discretionary Technical and Business Assistance (TABA) Program. Proposals submitted in response to DAF topics shall not include TABA.
AIR FORCE PROPOSAL EVALUATIONS
Proposals will be evaluated for overall merit in accordance with the criteria discussed in the 24.3 BAA. DAF is seeking varying technical/scientific approaches and/or varying and new technologies that would be responsive to the problem statement(s) and area(s) of interest in the topic. Multiple procurements are planned and anticipated to be awarded as a result of the topic, each proposal is considered a separate procurement and will be evaluated on its own merit, and that the Government may award all, some, or none of the proposals. Any per-award or per-topic funding caps are budgetary estimates only, and more or less funding may become available. Funding decisions are made with complete disregard to the other awards under the same topic.
In accordance with 15 USC 638(vv) (Section 4 of the SBIR and STTR Extension Act of 2022), and the Deputy Secretary of Defense Memorandum; Subject: Defense Small Business Innovation Research and Small Business Technology Transfer Due Diligence Program dated May 13, 2024, the DAF will review all proposals submitted in response to this BAA to assess security risks presented by small business concerns seeking a Federally funded award. The DAF will use information provided by the small business concern in response to the Disclosure of Foreign Affiliations or Relationships to Foreign Countries and the proposal to conduct a risk-based due diligence review on the cybersecurity practices, patent analysis, employee analysis, and foreign ownership of a small business concern, including the small business concern and employees of the small business concern to a foreign country, foreign person, foreign affiliation, or foreign entity. The DAF will also assess proposals utilizing open-source analysis and analytical tools, for the nondisclosures of the information set forth in 15 U.S.C. 638(g)(13). If DAF assesses that a small business concern has security risk(s), DAF will review the proposal, the evaluation, and the security risks and may decide not to select the proposal for award based upon a totality of the review.
MAJORITY OWNERSHIP IN PART BY MULTIPLE VENTURE CAPITAL, HEDGE FUND,
AND PRIVATE EQUITY FIRMS
Small business concerns that are owned in majority part by multiple venture capital operating companies (VCOCs), hedge funds, or private equity funds are not eligible to submit applications or receive awards for DAF Topics.
PERFORMANCE OF WORK REQUIREMENTS AND LOCATION OF WORK
For Phase I, a minimum of two-thirds of the research or analytical effort must be performed by the Awardee. The DAF measures percentage of work by both direct and indirect costs, not including profit.
Occasionally, the DAF will consider deviations from this performance of work requirement. Requests for Performance of Work deviations must be made twice: prior to submission during the topic open period and as part of the initial proposal submission. For requests prior to the initial proposal submission, the DAF will consider the request and approve or disapprove requesting applicants to proceed with DSIP submission. Upon proposal receipt, the DAF will again consider such requests for approval for the resultant award.
All R/R&D work must be performed in the United States. Based on a rare and unique circumstance, the DAF may approve a particular portion of the R/R&D work to be performed or obtained in a country outside of the United States. The awarding Funding Agreement officer must approve each specific condition in writing. Applicants seeking this approval must make such a request with their initial proposal submission. The DAF will not consider these requests prior to proposal submission.
DAF USE OF SUPPORT CONTRACTORS
Restrictive notices notwithstanding, proposals may be handled for administrative purposes only, by support contractors. These support contractors may include, but are not limited to TEC Solutions, Inc., APEX, Oasis Systems, Riverside Research, Peerless Technologies, HPC-COM, Mile Two, Montech, Wright Brothers Institute, and MacB (an Alion Company). In addition, only Government employees and technical personnel from Federally Funded Research and Development Centers (FFRDCs) MITRE and Aerospace Corporations working under contract to provide technical support to AF Life Cycle Management Center and Space and Missiles Centers may evaluate proposals. All support contractors are bound by appropriate non-disclosure agreements. Contact the AF SBIR/STTR CO Daniel J. Brewer (Daniel.Brewer.13@us.af.mil) with concerns regarding the use of support contractors.
PROPOSAL STATUS AND FEEDBACK
The Principal Investigator (PI) and Corporate Official (CO) indicated on the Proposal Cover Sheet will be notified by e-mail regarding proposal selection or non-selection. Small Businesses will receive a notification for each proposal submitted. Please read each notification carefully and note the Proposal Number and Topic Number referenced.
Automated feedback will be provided for Phase I proposals designated Not Selected. Additional feedback may be provided at the sole discretion of the DAF.
IMPORTANT: Proposals submitted to the DAF are received and evaluated by different organizations, handled by topic. Each organization operates within its own schedule for proposal evaluation and selection. Updates and notification timeframes will vary. If contacted regarding a proposal submission, it is not necessary to request information regarding additional submissions. Separate notifications are provided for each proposal.
The Air Force anticipates that all proposals will be evaluated and selections finalized within approximately 90 calendar days of solicitation close. Refrain from contacting the BAA CO for proposal status before that time.
Refer to the DoD SBIR Program BAA for procedures to protest the Announcement.
As further prescribed in FAR 33.106(b), FAR 52.233-3, Protests after Award should be submitted to: Air Force SBIR/STTR Contracting Officer Daniel J. Brewer, Daniel.Brewer.13@us.af.mil.
AIR FORCE SUBMISSION OF FINAL REPORTS
All Final Reports will be submitted to the awarding DAF organization in accordance with Contract instructions. Companies will not submit Final Reports directly to the Defense Technical Information Center (DTIC).
PHASE II PROPOSAL SUBMISSIONS
DAF organizations may request Phase II proposals while Phase I technical performance is ongoing or at any time after the conclusion of the period of performance. This decision will be based on the awardee’s technical progress, as determined by an DAF Technical Point of Contact review using the Phase II review criteria outlined above.
mailto:Daniel.Brewer.13@us.af.mil
Phase II is the demonstration of the technology found feasible in Phase I. Only Phase I awardees are eligible to submit a Phase II proposal. All Phase I awardees will be sent a notification with the Phase II proposal submittal date and detailed Phase II proposal preparation instructions. If the physical or email addresses or firm points of contact have changed since submission of the Phase I proposal, correct information shall be sent to the DAF SBIR/STTR One Help Desk. Phase II dollar values, performance periods, and proposal content will be specified in the Phase II request for proposal.
NOTE: The DAF primarily makes SBIR Phase I and II awards as Firm-Fixed-Price contracts. However, awardees are strongly urged to work toward a Defense Contract Audit Agency (DCAA)-approved accounting system. If the company intends to continue work with the DoD, an approved accounting system will allow for competition in a broader array of acquisition opportunities, including award of Cost-Reimbursement types of contracts. Please address questions to the Phase II CO, if selected for award.
All proposals must be submitted electronically via DSIP by the date indicated in the Phase II proposal instructions. Note: Only ONE Phase II proposal may be submitted for each Phase I award.
Air Force SBIR 24.3 Phase I Topic Index
SF243-0001 Event Based Data Fusion for Temporal Super Resolution in Image Based Tracking
SF243-0002 Spectral-Binning Focal Plane Array for Infrared Spectroscopy
SF243-0003 Reentry Events and Impact Location Prediction
SF243-0004 Responsible Space Behavior Event Classification
SF243-0001 TITLE: Event Based Data Fusion for Temporal Super Resolution in Image Based Tracking
OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Space Technology
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with the Announcement.
Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: The objective of this SBIR is to build and demonstrate data fusion algorithms which enable joint tracking between traditional imaging sensors and neuromorphic sensors. The resulting research should deliver data fusion algorithms that enable and inform search and track concept of operations while improving track fidelity in the temporal domain using the neuromorphic data and improving target discrimination using traditional imagers.
DESCRIPTION: Neuromorphic or event-based sensors (EBS) offer an alternative sensing paradigm in which pixels operate asynchronously and only report scene dynamics in the form of (x,y,t,p) messages where x and y are pixel indices, t is a timestamp in microsecond precision and p is a polarity bit to indicate increasing or decreasing changes [1]. The result is a sensor with high temporal resolution in combination with significantly reduced power consumption and overall data reduction as compared to traditional high speed video. The ability to measure fleeting temporal dynamics at reduced power and computational cost has prompted a number of studies in leveraging this sensing technology for applications such as moving target engagement. This then requires methods by which neuromorphic sensing data streams can be integrated with and leveraged alongside traditional sensing modalities. This topic seeks solutions to demonstrate the data fusion of neuromorphic and framing data such that tracking information from framing imagers can be temporally upsampled through the use of event based data streams. Ultimately this should be implemented and deployed in a processing architecture which is well suited for onboard processing hardware which are naturally constrained by size weight and power.
Although fused tracking data should be the end product the delivered software product, solutions should also include concept of operations considerations that enable geo-registration, clutter suppression, sensor tip & cue and track handoff. Finally the study should include trade space analysis to inform the ideal measurement cadence between the sensors and the ideal homography required to move between these modalities.
PHASE I: Phase I research should consist of development and demonstration of candidate tracking algorithms which can independently be applied to frame based imaging data and event based sensing data respectively. Awardee(s) should also identify a viable route by which data fusion will occur in the phase II research. Proposed candidate algorithms should be computationally lightweight, have a viable path towards the intended data fusion pipeline and execution within onboard processing hardware.
PHASE II: Phase II will take candidate algorithms identified in phase I and prove out the data fusion using real sensor data representative of overhead sensing concept of operations. This should involve working with co-sighted sensors in which the framing sensor field of view is much larger than the event based sensor field of view. Success of this data fusion will be measured by the ability to provide a continuous high fidelity track by temporally upsampling using the event based sensor data. Algorithms should also demonstrate the capability for improved target discrimination using intensity data from the framing imager. Finally, the processing pipeline used to detect, track and fuse will be integrated and run as a laboratory prototype which is identified as well suited for onboard processing. Performers will report tracking performance using annotated data to determine probability of detect and false alarm, sensitivity limits of the final prototype, temporal performance/real time capability and power requirements.
Prototypes should utilize surrogate data to demonstrate real time tracking, data fusion and track products.
Laboratory prototypes and associated software products will be delivered to the government technical point of contact and validated for potential field deployment using real time scene simulation and test sensors.
PHASE III DUAL USE APPLICATIONS: Phase III will optimize and repackage the laboratory prototype for integration into an overhead field demonstration. The field demonstration will include ground truth targets and emulate a tasking, collection, processing, exploitation, and dissemination pipeline to assess the accuracy, latency and value add for warfighter application. This will validate the ability of the solution to be deployed and transitioned to a space platform.
REFERENCES:
1. G. Gallego et al., "Event-Based Vision: A Survey," in IEEE Transactions on Pattern Analysis and
Machine Intelligence, vol. 44, no. 1, pp. 154-180, 1 Jan. 2022, doi:
10.1109/TPAMI.2020.3008413.;
2. Gehrig, D., Rebecq, H., Gallego, G., Scaramuzza, D. (2018). Asynchronous, Photometric Feature Tracking Using Events and Frames. In: Ferrari, V., Hebert, M., Sminchisescu, C., Weiss, Y. (eds) Computer Vision – ECCV 2018. ECCV 2018. Lecture Notes in Computer Science(), vol 11216.
Springer, Cham. https://doi.org/10.1007/978-3-030-01258-8_46.;
3. Stepan Tulyakov, Alfredo Bochicchio, Daniel Gehrig, Stamatios Georgoulis, Yuanyou Li, Davide Scaramuzza. (2022) Time Lens++: Event-based Frame Interpolation with Parametric Non-linear Flow and Multi-scale Fusion. https://doi.org/10.48550/arXiv.2203.17191.;
4. T. Stoffregen, G. Gallego, T. Drummond, L. Kleeman and D. Scaramuzza, "Event-Based Motion Segmentation by Motion Compensation," 2019 IEEE/CVF International Conference on Computer Vision (ICCV), Seoul, Korea (South), 2019, pp. 7243-7252, doi: 10.1109/ICCV.2019.00734.;
KEYWORDS: Neuromorphic; Even-Based Sensing; Computer Vision; Computation Imaging;
Asynchronous Sensor; Real Time Processing; Remote Sensing; Tracking; On-Board Processing; Data Fusion; Algorithm Development
SF243-0002 TITLE: Spectral-Binning Focal Plane Array for Infrared Spectroscopy
OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Microelectronics; Quantum Science
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with the Announcement.
Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: Development of a sensitive infrared focal plane array (FPA) that intrinsically resolves spectra over the spectral range 1.5 to 12 µm to be used in place of conventional high-speed spectrometers for measuring the spectral characteristics of targets and target simulators. The FPA must provide varying spectral response across one axis, with the other axis used for summation of radiation signal output for each spectral response bin.
DESCRIPTION: The space simulation chambers of the Space Systems Test Facility (SSTF) at Arnold Air Force Base facilitate the testing of high-performance interceptors and surveillance sensors in a low background radiation (20 K) environment, as well as making spectral signature measurements of aerospace structures. These facilities offer support for developmental and operational Test and Evaluation (T&E) of aerospace systems. To provide the needed spectral measurement capability, a cryo-vacuum-compatible compact spectrometer is needed to augment the spectral sensing capability of AEDC’s space simulation chambers, as well as provide technology advancement for similar venues throughout DoD. Such a spectral measurement system must operate in a low temperature, high vacuum environment and provide spectral data for point measurements of a targets using a collimating optical system. The spectral system should range from 1.5 to 14 µm with a spectral resolution of 0.1 (threshold) or 0.05 µm (objective), capable of 10 spectra per second (threshold) or 100 per second (objective) and an average quantum efficiency of 0.5. The goal is an FPA (or suite of FPAs) that inherently spectrally resolves the incident light so that, for example, a vertical row of pixels is sensitive only to a narrow spectral band of light would be summed to measure the signal within that narrow spectral band. Each subsequent vertical row increments spectrally so that across orthogonal axis of the FPA the full spectral range can be measured. The goal is to avoid conventional spectral dispersing elements or narrow band filters over the detection elements, or mechanical positioners that are problematic in terms of speed or reliability. The objective of this topic is to develop this FPA to accomplish spectral binning without a conventional dispersive element through the use of nanolithographic design and manufacturing techniques. However, other innovative concepts will be considered. This has the potential to be a technology development that could be extended to the area of hyperspectral scene projectors.
Proposals include detailed risk mitigation strategies by addressing potential challenges in developing and integrating the advanced FPA technology. Also, methodologies should be defined for testing and validation at critical junctures to ensure a clear and robust path to successful implementation.
PHASE I: Demonstrate a proof-of-concept spectral FPA that has a format of 128 x 128 pixels and provides 0.1 µm resolution across the LWIR spectral range. Implement, expound upon and refine, as necessary, the proposed risk mitigation strategies mentioned in the Topic Description. Provide a plan for Phase II testing and validation of the prototype FPA technology in the AEDC Space Systems Test Facility laboratory early enough to allow refinements to ensure a clear and robust path to successful implementation.
PHASE II: Develop, demonstrate and deliver a prototype infrared spectral FPA that has a format of 256 x 256 pixels and provides 0.05 µm resolution across its spectral range (1.5 to 14 µm). The product could be a suite of FPAs that can cover the desired spectral range. Implement the proposed testing and validation of the prototype at AEDC to allow modifications as necessary for successful implementation to the Space Systems Facility prior to the end of the Phase II effort.
PHASE III DUAL USE APPLICATIONS: Phase III efforts would be directed towards larger FPA formats with higher resolution spectral performance. Instrumentation incorporating this type of technology would be useful in many DoD venues involved in calibration, characterization, and mission performance testing of imaging sensor systems.
REFERENCES:
1. Nicholson, R.A., Mead, K.D., and Lowry, H.S., “Radiometric Calibration and Mission
Simulation Testing of Sensor Systems in the AEDC 7V and 10V Chambers,” SPIE Proceedings, Vol. 6208-46 (2006).;
2. McGovern, W.R., et.al., “Metal-mesh optical filter technology for mid-IR, far-IR, and submillimeter,” SPIE Proc. Vol. 8385, 838506 (2012).;
3. Le Perchec, J., et.al., “High rejection bandpass optical filters based on sub-wavelength metal patch arrays,” Optics Express, Vol. 19, No. 17, 15 Aug 2011.;
4. Fan, K, and Padilla, W.J., “Dynamic electromagnetic metamaterials,” Materials Today, Vol. 18, No. 1, Jan/Feb 2015, Dynamic electromagnetic metamaterials - ScienceDirect.;
5. Jiang, S., Li, J., Lai, J., Yi, F., “Metamaterial microbolometers for multi-spectral infrared polarization imaging,” Opt Express, 2022 Mar 14, 30(6):9065-9087.doi: 10.1364/OD.45298, Metamaterial microbolometers for multi-spectral infrared polarization imaging - PubMed (nih.gov).;
KEYWORDS: cryo-vacuum; infrared spectral calibration; infrared detectors; focal plane arrays; infrared spectrometers, imaging sensors; imaging sensor testing; space simulation
SF243-0003 TITLE: Reentry Events and Impact Location Prediction
OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Emerging Threat Reduction
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with the Announcement.
Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: Delivery of software capability that automatically detects reentry events and predicts the impact location and time.
DESCRIPTION: Reentry events present a specific challenge and inherent risk to space operations. A reentry refers to the return of a spacecraft into Earth’s atmosphere. There are a wide range of reasons as to why a reentry may be occurring but regardless of the motivation, detecting, tracking, and predicting impact is critical to the Space Domain Awareness (SDA) community. Space Systems Command (SSC) Space Domain Awareness (SDA) Tap Lab is seeking solutions to provide a software capability that can automatically detect reentry events and predict the impact time and location.
The software product must be able to be integrated into existing toolchains that are used by USSF operators and the SDA Tap Lab. As this capability is only one specific functionality to be used in conjunction with other tools to provide a wholistic understanding of space domain awareness and space operations, it is pivotal that the solution be able to seamless integrate with existing systems through API call. The solution must also meet all development and operational requirements for system integration and use on classified systems.
PHASE I: The Phase I will focus on conducting a feasibility study to demonstrate the technical and scientific merit of developing a software capability for detecting reentry events and predicting impact locations and times. This feasibility study would involve demonstrating a framework design as a proof of concept to show that such a capability is achievable. The proposed solution should be able to accurately detect reentry events and provide predictions regarding the impact area. Additionally, the feasibility study should include a plan for integrating the software capability into existing toolchains used by USSF operators and the SDA Tap Lab. This integration plan should outline how the solution will seamlessly integrate with existing systems through API calls and meet all development and operational requirements for use on classified systems. Overall, the Phase I topic description would lay the groundwork for further development and refinement of the software capability in subsequent phases.
PHASE II: Phase II will entail developing and refining the concept established in Phase I with a specific focus on enhancing evaluation metrics such as accuracy, precision, F1 score, and overall model performance. This phase will involve iterative improvements to the software capability based on insights gained from Phase I, aiming to enhance the accuracy and reliability of reentry event detection and prediction.
Furthermore, Phase II will expand the scope of input data to encompass a wider breadth of reentry events, thereby enhancing the robustness and effectiveness of the software capability. This expanded dataset will enable the model to capture a more comprehensive range of reentry scenarios, improving its predictive capabilities and overall performance.
Additionally, Phase II will involve rigorous testing and validation of the enhanced software capability to ensure its effectiveness across various operational scenarios. This testing will involve simulated and real-world data to validate the accuracy and reliability of the reentry event detection and prediction algorithms.
PHASE III DUAL USE APPLICATIONS: Phase III will involve scaling the finalized model developed in Phase II to encompass the analysis of all launch events, not just reentry events, thereby broadening its scope and utility. This expanded capability will enable the software to detect and predict the impact locations and times of various launch events, including rocket launches and other space activities.
Furthermore, Phase III will focus on expanding the notification functionality of the software to provide timely alerts and notifications regarding all significant launch events. This enhanced notification system will ensure that relevant stakeholders receive actionable information in real-time or near-real-time, enabling them to respond effectively to emerging space events.
Moreover, Phase III will explore the dual-use potential of the software solution, identifying opportunities for its application beyond military and national security contexts. This may include adaptation for commercial space operators, international partners, and other stakeholders interested in enhancing their space situational awareness and operational readiness.
REFERENCES:
1. C. Bhattacharyya & S. Bhattacharyya, "Detecting Re-entry of a Moving Object in an Irregular
Space", IEEE, January 2009.;
KEYWORDS: Reentry event; impact prediction; space domain awareness; SDA
SF243-0004 TITLE: Responsible Space Behavior Event Classification
OUSD (R&E) CRITICAL TECHNOLOGY AREA(S): Emerging Threat Reduction
The technology within this topic is restricted under the International Traffic in Arms Regulation (ITAR), 22 CFR Parts 120-130, which controls the export and import of defense-related material and services, including export of sensitive technical data, or the Export Administration Regulation (EAR), 15 CFR Parts 730-774, which controls dual use items. Offerors must disclose any proposed use of foreign nationals (FNs), their country(ies) of origin, the type of visa or work permit possessed, and the statement of work (SOW) tasks intended for accomplishment by the FN(s) in accordance with the Announcement.
Offerors are advised foreign nationals proposed to perform on this topic may be restricted due to the technical data under US Export Control Laws.
OBJECTIVE: Delivery of software capability that automatically detects and evaluates on orbit or space related activity. Evaluation should classify the specific activity as hostile, irresponsible, or other
DESCRIPTION: In July 2021, Secretary of Defense Lloyd Austin published a memo outlining five tenants of responsible space behavior.
• Operate in, from, and through space with due regard to others and in a professional manner;
• Limit the generation of long-lived debris;
• Avoid the creation of harmful interference;
• Maintain safe separation and safe trajectory;
• Communicate and make notifications to enhance the safety and stability of the domain.
As space continues to become more congested and commoditized there is a growing need to identify and understand irresponsible space behaviors. Understanding what those activities look like and identifying patterns such as type of irresponsible activity, associated elevation in threat level to other space objects, responsible party, and other key pieces of information will provide the space community with a deeper understanding and awareness. Additionally, this level of understanding can be leveraged to better understand and establish a prescribed list of space activity norms and standards.
Space Systems Command (SSC) Space Domain Awareness (SDA) Tap Lab is seeking solutions to provide a software capability that can automatically detect and classify on-orbit activities as hostile or irresponsible. Anticipated data sources are orbital data (elsets, state vector, observations, or other), pattern of life assessments and behavior patterns, and other open-source datasets.
The software product must be able to be integrated into existing toolchains that are used by USSF operators and the SDA Tap Lab. As this capability is only one specific functionality to be used in conjunction with other tools to provide a wholistic understanding of space domain awareness and space operations, it is pivotal that the solution be able to seamless integrate with existing systems through API call. The solution must also meet all development and operational requirements for system integration and use on classified systems.
PHASE I: The Phase I will involve conducting a feasibility study and developing a proof of concept for a software capability that can automatically detect and classify on-orbit activities as irresponsible, adversarial, or other. The proposed solution should demonstrate the ability to accurately classify and analyze on-orbit activities based on predefined criteria, such as patterns of behavior and associated threat levels. The feasibility study should assess the scientific and technical merit of the proposed approach, including the feasibility of integrating various data sources such as orbital data, pattern of life assessments, and other open-source datasets. Additionally, the Phase I effort should include a clear plan for how the proposed solution will be integrated into existing toolchains used by USSF operators and the SDA Tap Lab, as well as how it will meet development and operational requirements for use on classified systems. Funding for Phase I may be sought through government programs such as the Small Business Innovation Research (SBIR) program or other Department of Defense (DoD) initiatives focused on space domain awareness and threat detection.
PHASE II: Phase II involves building upon the concept developed in Phase I to enhance its capabilities and performance. This includes refining the software capability to improve evaluation metrics such as accuracy, precision, F1 score, and other relevant performance indicators. Additionally, Phase II should focus on expanding the breadth of input data used for detecting and classifying on-orbit activities. This broader dataset will enable a more comprehensive assessment of various types of space-related events, thereby enhancing the overall scope and effectiveness of the software solution. The Phase II effort should involve rigorous testing and validation to ensure that the refined concept meets the operational requirements of the Space Systems Command (SSC) Space Domain Awareness (SDA) Tap Lab and USSF operators.
PHASE III DUAL USE APPLICATIONS: Phase III dual use involves scaling up the finalized model developed in Phase II to encompass the analysis of all launch events and expanding its notification functionality. This means extending the software capability to detect, classify, and analyze a wider range of space-related activities, including not only on-orbit events but also all launch events. Furthermore, the notification functionality should be enhanced to provide timely alerts to relevant stakeholders, including USSF operators and other government agencies, about detected launch events and on-orbit activities.
In addition to its military application, this expanded capability could have dual-use potential for commercial space operators and international partners interested in enhancing their own space domain awareness and situational awareness capabilities. For example, commercial satellite operators could benefit from early detection and notification of launch events to protect their assets and ensure uninterrupted operations. International partners may also find value in leveraging the software capability to enhance their own space surveillance and tracking capabilities, contributing to global space domain awareness efforts.
To facilitate the transition of this technology, partnerships with industry stakeholders, international collaborators, and government agencies involved in space surveillance and tracking should be pursued.
Funding strategies may involve continued government support through programs such as SBIR or other research and development initiatives focused on space domain awareness and space situational awareness.
Integration plans should prioritize interoperability with existing systems and toolchains used by USSF operators and other relevant entities, ensuring seamless integration into operational environments.
Additionally, engagement with the ATLAS Dynamic Event Processing Space Threat Need program of record should be considered to align with broader Department of Defense priorities and initiatives in space domain awareness.
REFERENCES:
1. S. Flanagan et al., "A Framework of Deterrence in Space Operations", Rand Corporation, 2023.;
KEYWORDS: Responsible space; classification; space domain awareness; SDA; on orbit activity
File details come from the government source that posted it. Updated .