SF1449_SPE1C123R0068.PDF

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, & 30 1000165703

1. REQUISITION NUMBER

2. CONTRACT NO. 3. AWARD/EFFECTIVE

DATE

4. ORDER NUMBER

SPE1C1-23-R-0068

5. SOLICITATION NUMBER

2023 APR 21

6. SOLICITATION ISSUE

DATE

Megan Wherrity PCPQCBC

a. NAME

Phone: 215-737-5603

b. TELEPHONE NUMBER (No Collect calls)

2023 JUL 07

8. OFFER DUE DATE/

LOCAL TIME

9. ISSUED BY CODE SPE1C1

DLA TROOP SUPPORT

C AND T SUPPLY CHAIN

700 ROBBINS AVENUE

PHILADELPHIA PA 19111-5096

USA

10. THIS ACQUISITION IS 100UNRESTRICTED OR SET ASIDE: % FOR:

SMALL BUSINESS

HUBZONE SMALL

BUSINESS

WOMEN-OWNED SMALL BUSINESS

(WOSB) ELIGIBLE UNDER THE WOMEN-OWNED

SMALL BUSINESS PROGRAM

8 (A)

SERVICE-DISABLED

VETERAN-OWNED

SMALL BUSINESS

315210NAICS:

750SIZE STANDARD:

11. DELIVERYFOR FOB DESTINA-

TION UNLESS BLOCK IS

MARKED

12. DISCOUNT TERMS

13a. THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700)

13b. RATING

14. METHOD OF SOLICITATION

RFQ IFB RFP

15. DELIVER TO CODE 16. ADMINISTERED BY CODE

17a. CONTRACTOR/ CODE

OFFEROR

FACILITY

CODE

TELEPHONE NO.

18a. PAYMENT WILL BE MADE BY CODE

17b. CHECK IF REMITTANCE IS DIFFERENT AND PUT SUCH ADDRESS IN

OFFER

18b. SUBMIT INVOICES TO ADDRESS SHOWN IN BLOCK 18a UNLESS BLOCK

BELOW IS CHECKED

19.

ITEM NO.

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

See Schedule

(Use Reverse and/or Attach Additional Sheets as Necessary)

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1, 52.212-4. FAR 52.212-3 AND 52.212-5 ARE ATTACHED. ADDENDA ARE ARE NOT ATTACHED

27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED. ADDENDA ARE ARE NOT ATTACHED

28. CONTRACTOR IS REQUIRED TO SIGN THIS DOCUMENT AND RETURN

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORTH OR OTHERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND CONDITIONS SPECIFIED

29. AWARD OF CONTRACT: REF. OFFER

DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS ACCEPTED AS TO ITEMS:

30a. SIGNATURE OF OFFEROR/CONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

30b. NAME AND TITLE OF SIGNER (Type or Print) 30c. DATE SIGNED 31b. NAME OF CONTRACTING OFFICER (Type or Print) 31c. DATE SIGNED

SEE SCHEDULE

7. FOR SOLICITATION

INFORMATION CALL:

SEE SCHEDULE

03:00 PM

STANDARD FORM 1449 (REV. 2/2012)

Prescribed by GSA - FAR (48 CFR) 53.212

AUTHORIZED FOR LOCAL REPRODUCTION

PREVIOUS EDITION IS NOT USABLE

SEE ADDENDUM

EDWOSB

32a. QUANTITY IN COLUMN 21 HAS BEEN

ACCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:RECEIVED INSPECTED

COMPLETE PARTIAL FINAL

STANDARD FORM 1449 (REV. 2/2012) BACK

36. PAYMENT

PARTIAL FINAL

20.

SCHEDULE OF SUPPLIES/SERVICES

21.

QUANTITY

22.

UNIT

23.

UNIT PRICE

24.

AMOUNT

19.

ITEM NO.

32b. SIGNATURE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32c. DATE 32d. PRINTED NAME AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE

32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNMENT REPRESENTATIVE

32g. E-MAIL OF AUTHORIZED GOVERNMENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMOUNT VERIFIED

CORRECT FOR

37. CHECK NUMBER

38. S/R ACCOUNT NO. 39. S/R VOUCHER NUMBER 40. PAID BY

42a. RECEIVED BY (Print)

41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER 41c. DATE

42c. DATE REC'D (YY/MM/DD) 42d. TOTAL CONTAINERS

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYMENT

32e. MAILING ADDRESS OF AUTHORIZED GOVERNMENT REPRESENTATIVE

42b. RECEIVED AT (Location)

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 3 OF 67 PAGES

CONTINUED ON NEXT PAGE

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM

TECHNICAL REQUIREMENTS

THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN `R' OR AN `I' NUMBER IN SECTION B) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE

WEB AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-

ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

Continuation of Blocks from SF 1449

1. Blocks 8-9: The following methods of submitting a proposal are authorized in the solicitation:

DLA Internet Bid Board System (DIBBS): To submit an offer through DIBBS, search for the solicitation and then click the Red "Offer" button on the search results screen (Note: users must be logged in to DIBBS in order to submit the offer through DIBBS). For additional guidance, refer to https://www.dibbs.bsm.dla.mil/refs/help/Solicitations/DIBBS-Upload-Offer-User-Help.pdf.

Product Demonstration Model (PDM) Submission:

Product Demonstration Models are required to be submitted through traceable means via the U.S. Postal Service or a Commercial Carrier (Example: FedEx, Airborne, UPS, DHL, Emery). Due to COVID-19, in-person delivery of PDMs by offerors is not authorized. The Tracking Number shall be provided as part of the DIBBS electronic upload proposal submission.

PDMs are to be delivered between 8:00 a.m. and 3:00 p.m., Monday through Friday, except for legal federal holidays as set forth in 5 USC 6103. Packages must be plainly marked ON THE OUTSIDE OF THE CARRIER'S PACKAGE with the solicitation number, date, and time set forth for receipt of offers as indicated in block 9 of the Standard Form 1449. Ultimately, it is the offeror's responsibility to ensure that its PDMs are received at the correct location at the correct time. Failure to do so may result in the offeror's proposal being deemed untimely and not considered further for the award per FAR 52.215-1 Instruction to Offerors - Competitive Acquisitions.

NOTE: Defense Biometric Identification System (DBIDS) is used at this facility and DBIDS requirements shall be followed by all carriers attempting to deliver a proposal and/or package to this facility. Additional information can be obtained via https://dbids/dmdc.mil/.

NOTE: EFFECTIVE 01 OCTOBER 2021 ALL CARRIERS/INDIVIDUALS ATTEMPTING TO DELIVER ANY

PACKAGES/PROPOSALS/ETC. TO DLA TROOP SUPPORT SHALL HAVE PRESENT CREDENTIALS THAT

MEET REAL ID REQUIREMENTS IN ORDER TO GAIN ACCESS TO MAKE A DELIVERY. NO EXCEPTIONS

SHALL BE MADE.

The time and date for receipt of Product Demonstration Models is 3:00 P.M. Eastern Standard Time, or when applicable, Eastern Daylight Savings Time on the return date. If a Product Demonstration Model is not submitted by date and time of the closing, your offer will be considered incomplete.

Product Demonstration Models shall be sent to:

DLA Troop Support ATT: Megan Wherrity Building 3-A-4422 700 Robbins Avenue Philadelphia, PA 19111 https://dbids/dmdc.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 4 OF 67 PAGES

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

NOTE: In order for an offer to be considered timely, both Product Demonstration Models and Solicitation Package MUST be received by the date and time identified herein. Partial proposals (e.g. PDM only or Solicitation package only) will not be further evaluated and not eligible for award. Offerors are responsible to ensure timely delivery and/or submittal.

› Transmit “facsimile” offers are not authorized.

3. Block 17a › Offeror's assigned Unique Entity Identifier Number: _______________

(If you do not have a Unique Entity Identifier number, contact the individual identified in Block 7a of the SF 1449 or see 52.212-1, Instructions to Offerors --Commercial Items (paragraph j) for information on establishing a unique entity identifier.)

› Offeror's assigned Contractor and Government Entity (CAGE) Code:__________________

4. Block 17b Remittance Address: (if different from Contractor/Offeror address in block 17a of the SF 1449.)

5. Blocks 19-22

Item 0001: Men's Marine Corps All Weather Coat (Men's MC AWC)

Item 0002: Men's Marine Corps All Weather Coat, Special Measurement

PGC: 02850

CAUTION NOTICES:

OFFER EVALUATION

This acquisition will utilize Best Value Source Selection procedures. This Solicitation requires the submission of a Technical Proposal consisting of a Product Demonstration Models (PDM) and Past Performance information as part of the offer. For award evaluation purposes Technical merit is significantly more important in the award evaluation process than price. The Technical proposal will be evaluated to determine compliance with all characteristics listed for evaluation in the solicitation (Additional Source Selection Evaluation Procedures).

Failure to furnish this information by the time specified in the solicitation may be cause for rejection of offers if not otherwise acceptable under the provisions for considering late offers.

Prices will be evaluated based on the Annual Order Limitation Quantity (AOLQ) listed in Schedule of Supplies Section of this solicitation.

Offerors are required to submit one PDM for each item listed under "INSTRUCTIONS FOR SUBMITTING PRODUCT DEMONSTRATION MODEL (PDM) (1)(a)" and past performance information from the period three (3) years prior to the solicitation closing date.

FAILURE TO SUBMIT A PDM WITH THE OFFEROR'S PROPOSAL AT THE TIME AND DATE OF THE INITIAL CLOSING

OF THE SOLICITATION WILL CAUSE THE OFFEROR'S ENTIRE PROPOSAL TO BE REJECTED.

The contract will contain a 60-month period, with five (5) separate twelve (12) month price Tiers. Failure to offer on all Tiers will result in reject of the offeror's entire proposal.

The Government intends to evaluate proposals and award a contract without discussions with offerors. Therefore, the offeror's initial proposal should contain the offeror's best terms from a cost or price and technical standpoint. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 5 OF 67 PAGES

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

PRODUCTION DEMONSTRATION MODEL - CAUTION NOTICE

IT IS ESSENTIAL THAT ALL OFFERORS READ AND UNDERSTAND THIS NOTICE:

This solicitation requires submission of Product Demonstration Models (PDM) at time of closing as specified in this document. This solicitation will permit only an initial submission of the PDM with the offeror's proposal at the time and date of initial closing of the solicitation; offerors will not be given the opportunity to present subsequent submissions to correct deficiencies noted in the Government's evaluation of initial PDMs. Therefore, it is imperative that offerors put forth their best effort in constructing this PDM. Any correction to the PDM will not be permitted and will not be accepted by the Government.

FAILURE TO SUBMIT A PDM WILL CAUSE THE OFFEROR'S ENTIRE PROPOSAL TO BE REJECTED.

NOTICE TO PROSPECTIVE SUPPLIERS ON USE OF SUPPLIER PERFROMANCE RISK SYSTEM IN PAST

PERFORMANCE EVALUATIONS

The Supplier Performance Risk System (SPRS) application (https://www.sprs.csd.disa.mil/) will be used in the evaluation of suppliers' past performance. Reference provision language elsewhere in this solicitation.

“THE GOVERNMENT WILL RESERVE THE RIGHT TO CONSIDER PAST PERFORMANCE INFORMATION THAT

OCCURS FOLLOWING THE CLOSING OF THE SOLICITATION AS WELL”.

CAUTION NOTICE - TWO PHASE TECHNICAL / PRICE EVALUATION

The Government anticipates that numerous offerors will submit proposals on solicitation. In the event that eight or more proposals are received, the Government may use a two-phase evaluation process, which allows the Contracting Officer to conduct a preliminary evaluation of all offers, in order to determine which offers are the least likely to be candidates for further consideration. During this preliminary evaluation, all offerors' Product Demonstration Models (PDMs) and proposed prices will be evaluated. Certain offerors may be excluded from further consideration at this point, if their PDM ratings and/or offered prices are not competitive when compared with PDM ratings and prices proposed by other offerors. The remaining offers will then be evaluated for the remaining technical evaluation factors. After the completion of this review, the Contracting Officer will determine whether to establish a competitive range and enter into negotiations, or to award without discussions.

CAUTION NOTICE -PRICE SUSTAINABILITY

As part of the United States Defense Industrial Base, offerors are strongly encouraged to develop pricing that adequately accounts for market risk and volatility, includes sufficient margins to withstand future unforeseen contingencies, and allows for long term viability. Offerors are advised to refrain from submitting any offers or bids with the anticipation that in the event costs increase that there may be a price adjustment and/or cancellation of the contract. Offers are reminded that the awardee is expected to, and will be contractually bound to, perform at the final pricing submitted for the duration of the contract performance period(s) established in this solicitation. The successful performance of your contract is critical to the continued support of our nation's warfighters.

LATE BIDS

It is the Offerors responsibility to ensure that offers reach the Government office designated in the solicitation on time.

It is also the responsibility of the Offeror to address and mark offers as specified in FAR 52.212-1(b) - INSTRUCTIONS TO

OFFERORS -- COMMERCIAL ITEMS (JUN 2020)

CAUTION: Facsimile offers are not authorized for this solicitation.

BERRY AMENDMENT COMPLIANCE

Offerors are cautioned that all components must be of domestic origin in compliance with DFARS clause 252.225-7012, Preference for Certain Domestic Commodities (APR 2022).

Very Important: The vendor must certify their agreement to these terms and conditions of the solicitation by signing and dating the certification located below.

https://www.sprs.csd.disa.mil/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 6 OF 67 PAGES

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

SECTION 833 NATIONAL DEFENSE AUTHORIZATION ACT CERTIFICATION

I, (name) _____________________________ do hereby certify by signature below that all articles or items of “clothing,” including the materials and components thereof, being offered for sale to the Department of Defense have been grown, reprocessed, reused, or produced in the United States, other than sensor, electronics, or other items added to, and not normally associated with, clothing (and the materials and components thereof).

_____________________________________ (signature).

SYSTEM FOR AWARD MANAGEMENT (SAM)

The System for Award Management (SAM) is combining federal procurement systems and the Catalog of Federal Domestic Assistance into one new system. This consolidation is being done in phases. The first phase of SAM includes the functionality from the following systems:

* Central Contractor Registry (CCR)

* Federal Agency Registration (Fedreg)

* Online Representations and Certifications Application

* Excluded Parties List System (EPLS)

All Contractors must register on the SAM website: https://www.sam.gov/portal/public/SAM/ in order to be considered for award.

Offerors are reminded to complete all applicable representations and certifications appearing in this solicitation. Failure to complete all representations and certifications may result in the offer being removed from award consideration for failure to comply with all terms and conditions of the solicitation.

SMALL BUSINESS JOINT VENTURE

A small business joint venture offeror must submit, with its offer, the representation required in paragraph (c) of FAR solicitation provision 52.212-3, Offeror Representations and Certifications-Commercial Products and Commercial Services, and paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, in accordance with 52.204-8(d) and 52.212-3(b) for the following categories:

(A) Small business;

(B) Service-disabled veteran-owned small business;

(C) Women-owned small business (WOSB) under the WOSB Program;

(D) Economically disadvantaged women-owned small business under the WOSB Program; or

(E) Historically underutilized business zone small business.

RFID NOTICE TO DLA SUPPLIERS: RFID TAGS

This solicitation contains PASSIVE RADIO FREQUENCY IDENTIFICATION requirements. The provision located in Section D requires the successful awardee(s) to affix passive RFID tags at the case and palletized unit load levels. The successful awardee(s) is also required to electronically submit advance shipment notices to DoD to permit association of the passive RFID tag data with the corresponding shipment.

Procurement Technical Assistance Centers (PTACS) are available to deliver passive RFID assistance to DoD suppliers. See http://www.dla.

mil/db/procurem.html to identify your local PTAC and obtain information on upcoming workshops and other training/outreach services.

An RFID inlay shall be added to the barcode paper hang tag attached to item 0001.

Cost of implementing the item level RFID tagging must be included in the offered price.

RFID HANGTAG:

An RFID inlay shall be added to the barcode paper hang tag attached to each item. Where the use of self-adhesive bar-code labels are authorized, the RFID inlay may be added to the self-adhesive label in lieu of a paper hang tag. All other contract barcode and hang tag https://www.sam.gov/portal/public/SAM/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 7 OF 67 PAGES

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

requirements still apply.

The RFID inlay should be passive Gen2 with a frequency range between 860 and 960 MHz. The RFID antenna should be Avery/Dennison AD222 or comparable with ISO/IEC 18000-C EPC global C1G2 Protocol and an EPC memory allocation containing a 96 bit EPC Number.

The data linking the EPC number to the NSN and quantity unit pack must be exportable to VIM/ASAP. The bar code of the EPC Number must be printed at the bottom of the tag along with the human readable version below the bar code.

In addition to defects applicable to the paper tag and barcoding element, the RFID tag shall be examined for the defects listed below:

RFID Inlay omitted RFID Inlay not secure RFID Inlay not readable with RFID scanner RFID Inlay or configuration not as specified

The manual document “Item-Level Passive RFID Technology Manufacturer's Information Guide" provides guidance and is available from the Contracting Officer and as an attachment.

ELECTRONIC INVOICING AND ADVANCED SHIPMENT NOTIFICATIONS (ASN)

The Directorate of Clothing and Textiles (C&T) requires electronic invoicing on all contracts unless another method is mutually agreed to by the Contractor, the Contracting Officer, the contract administration office, and the payment office.

Utilization of Wide Area Workflow - Receipts and Acceptance (WAWF-RA) in conjunction with DFARS 252.232-7003, ELECTRONIC

SUBMISSION OF PAYMENT REQUESTS AND RECEIVING REPORTS.

The Directorate of Clothing and Textiles utilizes DLA Virtual Item Manager ARN Supply-Chain Automated Processing (VIM-ASAP), to transmit data to WAWF-RA. VIM-ASAP is the only authorized method to electronically process requests for payment to WAWF-RA for the Directorate of Clothing and Textiles. VIM-ASAP will give you visibility of contract information, track production status and print labels.

VIM-ASAP pre-populates contract data on your invoices, such as unit price, contract numbers, item numbers, addresses, and many other fields that will save you labor and time.

Advanced Shipment Notifications (ASNs) associated with PASSIVE RADIO FREQUENCY IDENTIFICATION are sent via VIM-ASAP to WAWF-RA processes. Please contact the VIM-ASAP help desk at 888-940-7348 to get started today!

STOP SHIPMENT DELAYS AND REJECTIONS!

For deliveries to New Cumberland depot or the 3PL-Third Part Logistics locations, ensure your Government or Commercial Bills of Lading are correctly annotated with the following information in the description of articles:

* Carrier Name

* Number of Pallets

* Vendor Name

* Contract Number

* Delivery Order Number

* Shipment Number

Notes: (1) Only LVI and Travis require deliveries to be scheduled by appointment. For the other 3PLs, advance notice is recommended but not required.

(2) 3PL warehouses are closed on Federal Holidays.

If a carrier is unable to make a delivery appointment on time or needs to reschedule, the carrier should contact the “Schedule Deliveries” phone numbers below to inform the 3PL and make other arrangements.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 8 OF 67 PAGES

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

DoDAAC: SD0131 RIC: VSTZ

Name and Delivery Address: Travis Association for the Blind AF & MC 3PL -Distribution Services 4512 South Pleasant Valley Road Austin, Texas 78744

Supports: Air Force and Marine Corps Recruit (Bag) Items and Non-Recruit Items to the Southwest Region (All Services)

Receiving Hours: 7:00AM - 2:00PM Schedule Deliveries: 512-647-4700

C&T POC: Marcus Hawkins, 512-647-4675

Do not let the following common invoicing errors delay your payments any longer:

Missing or Erroneous Contract Number Missing Call/Delivery Order Number Missing or Erroneous Shipment Number Failure to Mark DD250 as an Original Invoice Failure to Distribute a Copy of the DD250 to the Contract Administration Office Terminal Contract Line Item Number (CLIN) is Omitted, Incorrect or Does Not Match that Appearing in the Contract Missing or Erroneous Unit of Issue Quantity and Price are Incorrect Wrong Pay Office on Invoice

Here are three things you can do to speed your invoice payments:

Be sure your original invoice is properly completed and legible.

Submit your invoices electronically using the Web Invoicing System (WInS). It's fast, accurate, and costs you nothing! Learn more at the WInS Home Page, at: https://www.ecweb.dfas.mil/notes/ , and start using WInS with your next invoice! Or

If you currently receive delivery orders electronically, you could benefit by using an 810- invoice transaction.

Web Invoicing eliminates postage, snail mail, and much paperwork, and gets the invoice/voucher into the DFAS system usually within 24 hours. Web Invoicing is free to vendors doing business with the Government. You just enter the appropriate information and send your invoice to DFAS electronically. It provides help text and pull-down menus in many fields. For more specific questions, contact Janice Hockman (703) 607-5111, Kirsten Larco (703) 607-4920 or Debra Jones (703) 607-2082.

For questions about sending Electronic Data Interchange invoices (810-invoice transactions), contact Mr. Bud Wellens at (215) 737-2778.

For questions about paper invoice preparation, just call the DFAS Customer Service Resource Center at 1-800 756-4571, or Call DLA Troop Support DFAS liaisons listed below for assistance: Camille Conaway (215) 737-4406.

Check out these resources:

http://www.dfas.mil/money/vendor the DFAS Contract Payment Booklet… an excellent desk reference for contractor Accounts Receivable personnel, as well as the status of outstanding invoices.

http://www.dfas.mil/ information regarding bill paying process and additional points of contact.

http://www.dfas.mil/ecommerce/myInvoice/gettingstarted.html....myInvoice is an interactive web application developed specifically for contractors/vendors and government/military employees to obtain invoice status. It is available 24/7.

CAUTION - CONTRACTOR CODE OF BUSINESS ETHICS

FAR Part 3.1002(a) requires all government contractors to conduct themselves with the highest degree of integrity and honesty. Contractors should have a written code of business ethics and conduct within thirty days of award. To promote compliance with such code of business https://www.ecweb.dfas.mil/notes/

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 9 OF 67 PAGES

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

ethics and conduct, contractors should have an employee business ethics and compliance training program that facilitates timely discovery and disclosure of improper conduct in connection with government contracts and ensures corrective measures are promptly instituted and carried out. A contractor may be suspended and/or debarred for knowing failure by a principal to timely disclose to the government, in connection with the award, performance, or closeout of a government contract performed by the contractor or a subcontract awarded there under, credible evidence of a violation of federal criminal law involving fraud, conflict of interest, bribery, or gratuity violations found in title 18 of the United States Code or a violation of the False Claims Act. (31 U.S.C. 3729-3733)

If this solicitation or contract includes FAR clause 52.203-13 - CONTRACTOR CODE OF BUSINESS ETHICS AND CONDUCT; the contractor shall comply with the terms of the clause and have a written code of business ethics and conduct; exercise due diligence to prevent and detect criminal conduct; promote ethical conduct and a commitment to compliance with the law within their organization; and timely report any violations of federal criminal law involving fraud, conflict of interest, bribery or gratuity violations found in title 18 of the United States Code or any violations of the False Claims Act. (31 U.S.C. 3729-3733). When FAR 52.203-13 is included in the contract, contractors must provide a copy of its written code of business ethics and conduct to the contracting officer upon request by the contracting officer.

PATIENT PROTECTION AND AFFORDABLE HEALTH CARE ACT

Please note that the Patient Protection and Affordable Health Care Act ("the Act"), 124 Stat. 119, imposes duties upon employers concerning the provision of health care to their employees. Health insurance costs, including any costs associated with compliance with changes in the applicable law, are the sole responsibility of the offeror. Offerors are advised that their proposals should include any costs associated with the implementation of the Act. Any changes in health coverage costs and/or costs associated with compliance, occurring after award of a contract pursuant to this solicitation will not form the basis for an equitable adjustment of the contract price.

DOCUMENTS/REFERNCES BELOW ARE INCORPORATED IN THIS SOLCITATION BY REFERENCE:

A. DLA Troop Support Clothing & Textiles Additional Quality Assurance Requirements (August 2021) B. Item-Level Passive RFID Technology Manufacturer's Information Guide, Revision 2, December 2011.

C. DLA Labeling and Packaging Requirements for Dress Clothing (September 2018)

Contractors shall ensure that blocks 2 and 15 of the form DD1222 are updated to reflect the correct information.

Historically, both blocks contained the information of the DCMA QAR and their stamp/signature. When contractor's representative samples, these blocks shall include the contractor's representative's information. Block 17 shall still include the DCMA QAR to receive the results of the report even though they may not be sampling the material to be tested.

Please be advised the DD1222 has recently been updated. Ensure you are using the latest version which can be found here:

https://www.esd.whs.mil/directives/forms/

The Additional Documents - Clothing And Textiles (Dec 2008) DLA Troop Support are available as shown below:

DLA Troop Support Directorate of Clothing and Textiles

ATTN: DSCP-CBTC

700 Robbins Avenue Philadelphia, PA 19111-5092 Telephone [215] 737-8439

NOTICE TO DLA SUPPLIERS: DLA Troop Support has developed a web-based system that allows manufacturers the ability to request specifications, patterns and drawings on our contracting page. To request technical data for this solicitation use the following link to the DLA Troop Support C&T Technical Data Repository area at:

http://www.dla.mil/TroopSupport/ClothingandTextiles/SpecRequest.aspx

Please ensure the following required fields are entered when submitting your request:

Spec/CID Number: CR PD 03-08 Pattern Date: 4 December 2003

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 10 OF 67 PAGES

SPE1C1-23-R-0068

SECTION A - SOLICITATION/CONTRACT FORM (CONTINUED)

Item 0001: Men's Marine Corps All-Weather Coat (02850)/ 8405-01-504-8638 Solicitation Number: SPE1C1-23-R-0068

PLEASE ENSURE ALL CLAUSE FILL-INS ARE COMPLETE BEFORE SUBMITTING PROPOSAL.

Special Measurements is a provision that is required under this contract. Special Measurements are sizes outside of the item's size range. The special measurement unit price must be determined fair and reasonable before an award can be made. The special measurement unit price will be considered in determining an offeror's overall evaluated dollar value.

The Government intends to award a single Indefinite Delivery, Indefinite Quantity (IDIQ) Type Contract from this solicitation with a 60-month period, with five (5) separate twelve (12) month price tiers. Delivery orders will be placed against the Basic Contract via separate Form DD 1155.

Offerors are required to submit offers on all five (5) price Tiers. Failure to offer on all Tiers will result in rejection of your entire proposal.

Best Value Source Selection: Best Value Source Selection procedures will be utilized for this procurement. Offers will be evaluated based on the requirements of the solicitation. For this solicitation, Product Demonstration Models, and Past Performance/Experience are required.

Offerors are reminded to complete all applicable representation and certifications appearing in FAR 52.212-3 section of this solicitation. In addition, all offerors must complete annual representations and certifications electronically via the Online Representations and Certifications Application (website at: http://www.sam.gov).

Award will be based on factors other than cost and price alone:

Source evaluation and selection procedures are contained in Section "M" of the solicitation.

Submission of Technical Proposal is REQUIRED and must be submitted with your offer. (See Section "L")

This acquisition will utilize "Best Value" Source Selection Techniques. A technical proposal will be required in support of your offer. Please read sections "L" and "M" carefully as they contain instructions for preparation and explain the factors that will be used to evaluation your proposal.

Offerors are cautioned to make their original offer their best offer, as the Government reserves the right to make an award based on the initial offers without further discussions or negotiations.

Offer must provide fill-in information throughout the solicitation. Please sign page one of this solicitation and return the entire completed solicitation as your offer.

NOTE: THE DEFENSE APPROPRIATIONS AND AUTHORIZATIONS ACTS AND OTHER STATUTES (INCLUDING WHAT IS COMMONLY REFERRED TO AS "THE BERRY AMENDMENT") IMPOSES RESTRICTIONS ON THE DOD'S ACQUISITION OF FOREIGN PRODUCTS. GENERALLY, CLOTHING AND TEXTILE ITEMS (AS DEFINED IN DFARS 252.225-7012) MUST BE GROWN, REPROCESSED, REUSED, OR PRODUCED IN THE UNITED STATES UNLESS ONE OF

THE DFARS 252.225-7002-2 EXCEPTIONS APPLIES.

AUTHORIZED NEGOTIATORS:

The offeror represents that the following persons are authorized to negotiate on its behalf with the Government in connection with this request for proposal. Please list names, titles, e-mail addresses, and telephone numbers for each authorized negotiator.

Name: __________________________

Title: __________________________

Email: __________________________ __________________________

Phone: __________________________

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 11 OF 67 PAGES

SPE1C1-23-R-0068

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS

The Government intends to make one award. One firm-fixed price, with Economic Price Adjustment (EPA), indefinite delivery, indefinite quantity type contract, which applies to price tiers two through five only will be awarded under this solicitation. The resultant contract will have a five-(5) year ordering period. Within the five-(5) year ordering period, there will be five-(5) 12-month price tier periods. Failure to provide a unit price for each tier period may be deemed as non-acceptance of the solicitation terms and conditions and may result in the rejection of the offeror's entire proposal.

SUPPLIES AND PRICES

Item 0001: Men's Marine Corps All Weather Coat PGC: 02850 / NSN Series: 8405-01-504-8638 Inspection and Acceptance: Origin Term: 60 Months Minimum Quantity: 13,520 Annual Estimated Quantity: 47,300 Prices are to be based on F.O.B Destination only

TERM UNIT OF ISSUE UNIT PRICE

Tier 1 EA ____________

Tier 2 EA ____________

Tier 3 EA ____________

Tier 4 EA ____________

Tier 5 EA ____________

* The Annual Order Limitation Quantity (AOLQ) is 47,300 per tier. The AOLQ refers to the annual ordering limitation in FAR 52.216-19. The overall contract maximum is 236,500.

NOTE: EACH TIER IS A 12 MONTH PERFORMANCE PERIOD

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 12 OF 67 PAGES

SPE1C1-23-R-0068

SECTION B - SUPPLIES OR SERVICES AND PRICES OR COSTS (CONTINUED)

Production Lead Time: Delivery orders may require concurrent deliveries. The production lead time is 150 days after the date of the initial order and 120 days for all subsequent stock orders. The Government intends to issue delivery orders that will allow for uninterrupted delivery between orders, when possible. However, failure to do so shall not be the cause for any price adjustment under 52.212-4.

Item 0001 Ship to:

DoDAAC: SD0131 RIC: VSTZ

Name and Delivery Address: Travis Association For The Blind AF & MC 3PL -Distribution Services 4512 South Pleasant Valley Road Austin, Texas 78744

SPECIAL MEASUREMENTS:

Inspection and Acceptance is at Destination. Shipping locations vary.

Item 0002: Men's Marine Corps All Weather Coat, Special Measurement PGC: 02850 / NSN Series: 000AWC340 Inspection and Acceptance: Destination Prices are to be based on F.O.B Destination only.

TERM UNIT OF ISSUE SPECIAL MEASUREMENT UNIT PRICE

Tier 1 EA ____________

Tier 2 EA ____________

Tier 3 EA ____________

Tier 4 EA ____________

Tier 5 EA ____________

The ordering period is from the effective date of award through 60 months thereafter. The Government may issue delivery orders during this timeframe not to exceed the contract maximum quantity.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 13 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

SECTION C - SPECIFICATIONS/SOW/SOO/ORD

ITEM 0001: COAT, ALL-WEATHER, MEN'S MC

PGC: 02850

COAT, ALL-WEATHER, MEN'S

ADDITIONAL INFORMATION FOR CR PD 03-08:

COAT, ALL WEATHER, MEN'S, SHALL BE MADE IN ACCORDANCE WITH TYPE I - WITH RIGHT AND LEFT GUN PATCHES (MARINE

CORPS) OF CR/PD 03-08

PATTERN DATE: 04 DEC 2003

SAMPLE SIZE: 40R

PGC:02850

STANDARD SAMPLE FOR CLOTH, POPLIN, POLYESTER AND

COTTON (WATER REPELLENT), MARINE CORPS PEWTER 2246 CONFORMING TO A-A-50531A, AND APPLICABLE FOR SHADE, FINISH &

COLORFASTNESS ON ROLL NO. 3897.

CHARACTERISTICS REQUIREMENT TEST METHOD

LAUNDERING (MIN) EQUAL TO

STANDARD AATCC 61 3A

AFTER 3 CYCLES GRADE 4 AATCC 61 3A

PERSPIRATION (MIN) GRADE 4 AATCC 15 1/

CROCKING (MIN) GRADE 2.5 AATCC 8

LIGHT (MIN) GRADE 4 AATCC 16 OPT A

INTERIM CHANGES TO PD-03-08:

PAGE 11, TABLE IV -COAT FINISHED MEASUREMENTS,

DELETE TABLE IV & INSERT NEW TABLE AS FOLLOWS:

TABLE IV COAT FINISHED MEASUREMENTS

SIZE

. 30------32------34------36------38------40

ALL LENGTHS CHEST (1/) TOLERANCE +/- 3/4

. 39 41 43 45 47 49

SIZE

. 42------44------46------48------50------52

ALL LENGTHS CHEST (CONTINUED)

. 51 53 55 57 59 61

SIZE

. 30------32------34------36------38------40

BACK LENGTH (2/) TOLERENCE +/- 1/2

XS-- 40-3/4 41 41-1/4 41-1/2 41-3/4

S 42-1/2 42-3/4 43 43-1/4 43-1/2 43-3/4 R 44-1/2 44-3/4 45 45-1/4 45-1/2 45-3/4 L -- 46-3/4 47 47-1/4 47-1/2 47-3/4

XL-- -- 49-1/2 49-3/4 50 50-1/4

SIZE

. 42------44------46------48------50------52

BACK LENGTH (CONTINUED)

XS42 -- -- -- -- --

S 44 44-1/4 44-1/2 44-3/4 45 45-1/4 R 46 46-1/4 46-1/2 46-3/4 47 47-1/4 L 48 48-1/4 48-1/2 48-3/4 49 49-1/4

XL50-1/2 50-3/4 51 51-1/4 -- --

SIZE

. 30------32------34------36------38------40

SLEEVE LENGTH (/3) TOLERANCE +/- 1/2

XS-- 16 16 16 16 16

S 17 17 17 17 17 17

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 14 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

R 18 18 18 18 18 18 L -- 19 19 19 19 19

XL-- 20-1/2 20-1/2 20-1/2 20-1/2 20-1/2

SIZE

. 42------44------46------48------50------52

SLEEVE LENGTH (CONTINUED)

XS16 -- -- -- -- --

S 17 17 17 17 17 17 R 18 18 18 18 18 18 L 19 19 19 19 19 19

XL20-1/2 20-1/2 20-1/2 20-1/2 -- --

SIZE

. 30------32------34------36------38------40

BELT LENGTH (/4) TOLERANCE +/-3/4

. 40 42 44 46 48 50

SIZE

. 42------44------46------48------50------52

BELT LENGTH (CONTINUED)

. 52 54 56 58 60 62

ADDITIONAL INTERIM CHANGES TO CR/PD 03-08

PAGE 1, SHEDULE OF SIZES, DELETE ENTIRELY AND

SUBSTITUTE THE FOLLOWING:

"XSHORT SHORT REG LONG XLONG

--- 30 30 --- --- 32 32 32 32 --- 34 34 34 34 34 36 36 36 36 36 38 38 38 38 38 40 40 40 40 40 42 42 42 42 42 --- 44 44 44 44 --- 46 46 46 46 --- 48 48 48 48 --- 50 50 50 --- --- 52 52 52 ---

PAGE 2 PARAGRAPH 3.1 DESCRIPTION, LINE 5

AFTER "5" ADD "THE MATERIAL FOR THE

SLEEVE LINING SHALL BE TAFFETA AS SPEC-

IFIED IN PARAGRAPH 3.3.2.2.)

LINE 5, DELETE "1/4" AND SUBSTITUTE "3/8".

PAGE 2, PARAGRAPH 3.1.2, BELT LOOP PLACEMENT

LINE 1, AFTER "FINISHING" DELETE "1/2" AND

SUBSTITUTE "2-1/2".

PAGE 2, PARA. 3.1.2a SHOULDER STRAPS, DELETE

PARAGRAPH IN ITS ENTIRETY AND SUBSTITUTE THE

FOLLOWING PARAGRAPH: "3.1.2a SHOULDER STRAPS.

THE OVEREDGED STRAIGHT END OF SHOULDER STRAP

SHALL BE SEWN TO THE COAT WITH A 3/16 INCH SEAM,

THEN FOLD STRAP TO THE FINISHED POSITION AND TOP

STITCH 1/4 INCH FROM THE FOLDED EDGE. THE

FINISHED SHOULDER STRAPS SHALL BE CENTERED ALONG

THE SHOULDER SEAM AND THE POINTED END SHALL

FINISH EVEN TO 1/2 INCH FROM THE COLLAR SETTING

SEAM. THE SHOULDER STRAPS SHALL FINISH SMOOTH

AND FLAT WITHOUT DISTORTION. THE SHOULDER STRAP

TOPSTITCHING SHALL FOLLOW THE TOP STITCHING LINE

OF THE FRONT SLEEVE SEAMS."

PAGE 2, PARAGRAPH 3.1.5, REMOVABLE LINER,

LINE 1, DELETE "SET IN SLEEVES" AND

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 15 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

SUBSTITUTE "1/2 RAGLAN SLEEVES".

LINE 3, AFTER "ACCOMODATE A" DELETE "27"

AND SUBSTITUTE "24"

PAGE 2, PARAGRAPH 3.1.5.1 DELETE ENTIRELY

PAGE 3, PARAGRAPH 3.2.2. BUTTONHOLES, LINE 4,

AFTER "ONE ON THE RIGHT FRONT" INSERT "IN

HORIZONTAL ALIGNMENT WITH TOP BUTTON ON RIGHT

FRONT" AND AFTER "ONE ON EACH LAPEL" INSERT

"AND THE CUT OPENING OF BUTTONHOLES SHALL BE

POSITIONED 3/4 INCH FROM EDGE OF COAT."

PAGE 3, PARAGRAPH 3.2.2, BUTTONHOLES, LINE 5

AFTER "SQUARE-BAR TYPE" ADD "WORKED OVER

GIMP". AT END OF THE PARAGRAPH ADD:

"THERE SHALL BE TWO 3/4 INCH CUT, SQUARE BAR

TYPE BUTTONHOLES, ONE CENTERED ON THE BELT

FASTENER 3/8 INCH FROM THE END AND ONE

CENTERED ON THE RIGHT BACK VENT AS PER

MARK ON PATTERN. THE LAPEL BUTTONHOLES SHALL BE 3/4 INCH FROM

THE EDGE AND 1-1/2 INCHES DOWN FROM THE TOP

PAGE 3, PARAGRAPH 3.2.3 BUTTONS

LINE 2, DELETE "18" AND SUBSTITUTE "45"

PAGE 3, PARAGRAPH 3 AFTER "THE COAT SHALL HAVE THREE 24 LIGNE BUTTONS" DELETE "ONE BUTTON SHALL BE SEWN ON EACH SLEEVE LINING TO CORRESPOND WITH THE LOOPS ON THE REMOVABLE LINER'S SLEEVE BOTTOM AND ONE SHALL BE POSITIONED ON THE BELT FASTENER" AND INSERT "ONE BUTTON SHALL BE SEWN ON EACH SLEEVE LINING TO CORRESPOND WITH THE LOOPS ON THE REMOVABLE LINER'S SLEEVE BOTTOM AND ONE ON THE LEFT BACK VENT TO CORRESPOND TO THE BUTTONHOLE. THE COAT SHALL HAVE SEVEN 18 LIGNE BUTTONS; SIX ATTACHED TO THE 45 LIGNE BUTTONS ON THE COAT FRONT AND ONE

POSITIONED ON THE BELT."

PAGE 3, AFTER PARAGRAPH 3.2.3 BUTTONS, INSERT

NEW PARAGRAPH AS FOLLOWS:"3.2.3.1 LAPEL BUTTON

PLACEMENT. THE TOP RIGHT LAPEL BUTTON SHALL

BE POSITIONED SO THAT THE LEFT COAT FRONT LAYS

SMOOTH AND FLAT WITHOUT DISTORTION AND THE

NECK OPENING SHALL BE 2 TO 2-1/2 INCHES BETWEEN

COLLARSTAND JOINING SEAM AND COLLARSTAND JOINING

SEAM ACROSS FRONT OF COAT."

PAGE 6, PARAGRAPH 3.3.2.4, LINE 2 AFTER

"COMBED COTTON" INSERT "OR STAPLE RAYON".

LINE 9: DELETE "2.5" AND SUBSTITUTE "1.5"

PAGE 6, PARAGRAPH 3.3.3, LINE 1 DELETE "1/4"

AND SUBSTITUTE "3/8".

PAGE 8 TABLE II DELETE IN ITS ENTIRETY AND SUBSTITUTE THE FOLLOWING NEW TABLE:

Button Placement Style 1/ Size Diameter Lignes Compression strength, lbs., Min. 2/ Thickness 3/ Lignes, Min. Total Quantity per coat Front & Inside anchor 20 or 21 45 800 7 8 Sleeve & Shoulder Strap 20 or 21 30 800 5 4 Sleeve Liner & Back Vent 20 or 21 24 800 5 3 Stay Buttons & Belt 15 18 800 4 7 Extra Buttons 20 or 21 45 800 7 1 20 or 21 30 800 5 1 20 or 21 24 800 5 1 15 18 800 4 1

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 16 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

PAGE 8, PARAGRAPH 3.4.9 DELETE ENTIRELY AND

SUBSITUTE: "3.4.9 SLIDE FASTENER. THE

SLIDE FASTENER FOR THE COAT AND THE REMOV-

ABLE LINER SHALL BE A SEPARATING, NON-REVER-

SIBLE, RIGHT-HAND, LIGHT SIZE WITH AN ALUMINUM

OR BRASS CHAIN, SHORT TAB PULL. THE LENGTHS OF

THE SLIDE FASTENERS SHALL CONFORM TO THE SIZE

COAT WITH A MINIMUM LENGTH.OF 70 INCHES. THE

COLOR OF THE TAPE SHALL BE A GOOD MATCH TO THE

BASIC MATERIAL AND SHALL BE 7/16 OR 9/16 INCH

WIDE. THE ENDS OF THE SLIDE FASTENER SHALL

BE EQUIDISTANT FROM THE BOTTOM EDGE OF COAT.

PAGE 10 TABLE III, LIST OF PATTERN PARTS, DELETE "BACK VENT FACING" AND "POCKETS FACING, CORD" AND INSERT "NECK

FACING" AND "NECK FACING, FUSIBLE".

PAGE 12, TABLE V - LINER FINISHED MEASUREMENTS,

DELETE TABLE V AND INSERT NEW TABLE AS FOLLOWS:

TABLE V LINER FINISHED MEASUREMENTS

ALL LENGTHS CHEST (1/) TOLERANCE +/- 3/4

SIZE

. 30------32------34------36------38------40 . 31 33 35 37 39 41

ALL LENGTHS CHEST (CONTINUED)

SIZE

. 42------44------46------48------50------52 . 43 45 47 49 51 53

. BACK LENGTH (2/) TOLERENCE +/- 1/2

SIZE

. 30------32------34------36------38------40

XS-- 33 33-1/4 33-1/2 33-3/4 34

S 34-3/4 35 35-1/4 35-1/2 35-3/4 36 R 36-3/4 37 37-1/4 37-1/2 37-3/4 38 L - 39 39-1/4 39-1/2 39-3/4 40

XL-- -- 41-3/4 42 42-1/4 42-1/2

. BACK LENGTH (CONTINUED)

SIZE

. 42------44------46------48------50------52

XS34-1/4 -- -- -- -- --

S 36-1/4 36-1/2 36-3/4 37 37-1/4 37-1/2 R 38-1/4 38-1/2 38-3/4 39 39-1/4 39-1/2 L 40-1/4 40-1/2 40-3/4 41 41-1/4 41 1/2

XL42-3/4 43 43-1/4 43-1/2 -- --

SLEEVE LENGTH (/3) TOLERANCE +/- 1/2

SIZE

. 30------32------34------36------38------40

XS-- 14-1/2 14-1/2 14-1/2 14-1/2 14-1/2

S 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 R 16-1/2 16-1/2 16-1/2 16-1/2 16-1/2 16-1/2 L -- 17-1/2 17-1/2 17-1/2 17-1/2 17-1/2

XL-- -- 18-1/2 18-1/2 18-1/2 18-1/2

SLEEVE LENGHT (CONTINUED)

SIZE

. 42------44------46------48------50------52

XS14-1/2 -- -- -- -- --

S 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 15-1/2 R 16-1/2 16-1/2 16-1/2 16-1/2 16-1/2 16-1/2 L 17-1/2 17-1/2 17-1/2 17-1/2 17-1/2 17-1/2

XL18-1/2 18-1/2 18-1/2 18-1/2 -- --

PAGE 16, PARAGRAPH 7.2.2 ASTM TEST METHODS

ADD "D-256 STANDARD TEST METHOD FOR IMPACT RE-

SISTANCE OF PLASTICS AND ELECTRICAL INSULATING

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 17 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

MATERIALS".

PACKAGING AND MARKING INSTRUCTIONS:

TEN (10) ALL WEATHER COATS ONE SIZE ONLY SHALL

BE PACKED IN A SNUG FITTING FIBERBOARD SHIPPING

CONTAINER CONFORMING TO ASTM-D5118, TYPE CF,

STYLE RSC, GRADE 275, VARIETY SW, CLASS DOMESTIC

WITH A DW LINER. THE DIMENSIONS OF THE CONTAINER

SHALL APPROXIMATE 20-H X 16-W X 24-L. METHOD OF

CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D-1974,

2A2, FIGURE 1 OR AS AND ALTERNATE 2B6 OR 2B7-

FIGURE 3.

AQL'S FOR COMMERCIAL ITEM DESCRIPTIONS

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF SAMPLING PROCEDURES AND TABLES FOR

INSPECTION BY ATTRIBUTES, ANSI/AQSC Z1.4,

GENERAL INSPECTION LEVEL 2".

(Ref. W2850)

DELETE CURRENT "BARCODE LABEL/TAG" REQUIREMENTS AND SUBSTITUTE THE FOLLOWING:

LABEL TAG: EACH ITEM SHALL BE INDIVIDUALLY BAR-CODED WITH A PAPER TAG FOR PERSONAL CLOTHING ITEMS. THE PAPER USED FOR THE TAGS SHALL BE STANDARD BLEACHED SULFATE HAVING A BASIS WEIGHT OF 100 POUNDS WITH A SMOOTH FINISH TO ACCEPT THERMAL TRANSFER AND DIRECT PRINTING. THE TAGS SHALL HAVE A HOLE AND SHALL BE ATTACHED TO EACH ITEM BY A FASTENER, CLEARLY LEGIBLE AND READABLE BY SCANNER. THE BAR-CODING ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK NUMBER (NSN). THERE SHALL BE A 12 DIGIT UNIVERSAL PRODUCT CODE (UPC) ASSIGNED FOR ALL NSNS BY THE GOVERNMENT. THE INITIAL "UPC" MUST APPEAR BENEATH THE CODE. THE BAR CODES FOR NSN AND UPC SHALL BE A MEDIUM TO HIGH DENSITY AND SHALL BE LOCATED SO THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM WHEN IT IS FOLDED AND

PACKAGED AS SPECIFIED. THE LABEL'S LOCATION SHALL CAUSE NO DAMAGE TO THE ITEM.

NOTE: UNIVERSAL PRODUCT CODE INFORMATION THE GOVERMENT ASSIGNED UNIVERSAL PRODUCT CODE (UPC) MUST BE

PLACED ON ALL SHIPPING CARTONS ON WHICH THE NSN APPEARS.

THE FOLLOWING DEFECTS APPLY FOR BARCODE LABELS/TAGS:

BAR CODE OMITTED OR NOT READABLE BY SCANNER

HUMAN-READABLE INTERPRETATION (HRI) OMITTED OR ILLEGIBLE

NOT VISIBLE ON FOLDED, PACKAGED ITEM CAUSES DAMAGE TO THE ITEM

NOTE: IF THE END ITEM IS PLACED IN A PLASTIC BAG - USE TYPE VII (PRESSURE SENSTIVE LABEL) OF MIL-DTL-32075.

IF THE END ITEM IS TIED IN A BUNDLE OR LEFT AS AN INDIVIDUAL ITEM, USE TYPE VIII (TAG, PAPER) OF MIL-DTL-32075.

AQLS FOR COMMERCIAL ITEM DESCRIPTION (CIDS)

END ITEM DIMENSIONAL 2.5

VISUAL 4.0

PALLETIZATION 6.5

ACCEPTABILITY OF LOTS WILL BE DETERMINED BY THE

USE OF "SAMPLING PROCEDURES AND TABLE FOR

INSPECTION BY ATTRIBUTES". ANSI/ASQC Z1.4

GENERAL INSPECTION LEVEL II

(Ref. T7520)

LIST OF APPROVED WATER REPELLENT TREATMENTS FOR MILITARY FABRICS 1/

THE FOLLOWING FLUOROCHEMICALS ARE APPROVED "DURABLE" TYPE WATER REPELLENT TREATMENTS FOR USE ON MILITARY FABRICS. THEY MAY BE USED ALONE OR COMBINED WITH AN APPROVED EXTENDER COMPONENT TO PRODUCE A "QUARPEL"

TYPE OF WATER REPELLENT TREATMENT REPELLENT TREATMENTS:

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 18 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

TRADE NAME SUPPLIER

AURAPEL FC-340 AURALUX DIV OF SYBRON

CHEMICAL CO.

P.O. BOX 113

YANTIC, CT 06389

TEL: 860-886-2626

BARPEL 1700 APOLLO CHEMICAL CORP.

PO BOX 2176

BURLINGTON, NC 27215

TEL: 910-226-1161

CHEMSHIELD 939 CHEM-TEX INC.

WR 930 P.O. BOX 1105

1891 N. COLUMBIA ST.

BLDG 106, MILLEDGEVILLE, GA 31061

TEL: 336-578-5476

FABRIC GUARD ML TANNER CHEMICAL CO., INC.

PO BOX 1967, FURMAN HALL

COURT, GREENVILLE, NC 29602

TEL: NO LISTING IN NC ON 800#

ZONYL B CIBA-GEIGY CORP.

ZONYL D P.O. BOX 11422

ZONYL RN 2/ HIGHPOINT, NC 27409

ZONY 6700 TEL: 888-396-2488

ZONYL 6700 GF

ZONYL 7040

ZONYL 8300

ZONYL 8070

ZONYL DWR

ZONYL MIL

FC-232 3M CORPORATION,

FC-251 PROTECTIVE PRODUCTS DIV.

FC-461 ST. PAUL, MN. 02895

FC-831 TEL: 612-737-0098

REPEARL F-14N MITSUBISHI INTERNATIONAL

REPEARL F-35 520 MADISON AVE.

REPEARL F-31 NEW YORK, NY 10022

TEL: 212-605-2440

800-851-5765

NK GUARD FG-280 NICCA USA, INC.

P.O. BOX 1600

5000 NELSON ROAD

FOUNTAIN INN, SC 29644

TEL: 864-862-1426

SEQUAPEL CQR SEQUA CHEMICAL CORP.

SEQUAPEL NRL ONE SEQUA DRIVE

SEQUAPEL WOR CHESTER, SC 29807-0070

SEQUAPEL WOR-46 TEL: 803-385-5181

TEX-TEL NI-40 AUTO CHEMICAL CO.

THREE PARKWAYS

PHILADELPHIA, PA 19102

TEL: 215-419-7000

UNIGUARD-5061 UNICHEM INC.

P.O. BOX 612

916 W. MAIN ST.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 19 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

HAW RIVER, NC 27258

TEL: 336-578-5476

FLUOROGARD 1700 PUTNAM INDUSTRIES, INC

197 RIDGEWOOD AVE.

GLEN RIDGE, NJ 07028

TEL: NOT LISTED

FLO CHEM EXTRA 17-4 EMCO SERVICES INC.

P.O. BOX 2191

TAUNTON, MA 02780

TEL: 508-823-8852

1/ A SEPARATE LIST OF APPROVED WATER REPELLENT TREATMENTS EXISTS FOR FABRICS CONFORMING TO CLOTH, CAMOUFLAGE PATTERN; WOODLAND, COTTON AND NYLON, CLASS 2, MIL-C-44031 AND CLOTH, TWILL, CAMOUFLAGE PATTERN, COTTON AND

NYLON FOR DESERT UNIFORM, CLASS 1A, MIL-C-44034.

2/ FOR POLYESTER, NYLON AND BLENDS OF MANMADE FIBERS ONLY.

ADDITIONAL INFORMATION FOR MIL-I-45208:

NOTE: MIL-I-45208 HAS BEEN CANCELLED AND REPLACED BY THE FOLLOWING: INTERNATIONAL STANDARDS ISO 9001:2008

OR AMERICAN SOCIETY FOR QUALITY ASQ 2008 VERSION.

HIGHER LEVEL INSPECTION SYSTEM:

THE INSPECTION SYSTEM(S) MUST BE SUBMITTED WITH YOUR

BID PROPOSAL FOR EVALUATION AND APPROVAL BY DLA TROOP

SUPPORT'S CONTRACTING OFFICER.

INSPECTION SYSTEM(S) COMPLIANT/BUT ARE NOT

LIMITED TO THE INTERNATIONAL STANDARDS ISO 9001

OR ASQ 2008 MAY BE UTILIZED IF TAILORED TO THE SPECIFIC

QUALITY ASSURANCE REQUIREMENTS IN THIS SOLICITATION.

(ref. T1286)

MIL-STD-129P, WITH CHANGE 4 - DEPARTMENT OF DEFENSE STANDARD PRACTICE MILITARY MARKING FOR SHIPMENT AND

STORAGE - DATED

19 SEPTEMBER 2007

INTERIM CHANGES:

OMISSION OF MARKINGS ON EXTERIOR SHIPPING CONTAINERS OF ITEMS

IN THE DLA TROOP SUPPORT CLOTHING AND TEXTILE (C&T) DIRECTORATE:

THE NOMENCLATURE AND MANUFACTURER'S NAME (WHEN THE NAME IDENTIFIES THE MATERIAL) SHALL BE OMITTED FROM ALL EXTERIOR SHIPPING CONTAINERS OF DLA TROOP SUPPORT C&T ITEMS, REGARDLESS OF MODE OF SHIPMENT.

IF THE MANUFACTURER'S NAME DOES NOT IDENTIFY THE MATERIAL AS BEING CLOTHING, IT MAY REMAIN. NSNS SHALL BE SHOWN ON ALL SHIPPING CONTAINERS OF C&T ITEMS, THE PACKING LIST SHALL BE PLACED INSIDE THE LAST CONTAINER TO BE LOADED FOR EACH SHIPMENT. THE WORDS "PACKING LIST HERE" SHALL BE STENCILED, NOT HAND LETTERED, ON THE

CONTAINER.

MIL-STD-147 IS HEREBY REINSTATED AS FOLLOWS:

MIL-STD-147E DEPARTMENT OF DEFENSE

16 MAY 2008 STANDARD PRACTICE

PALLETIZED UNIT LOADS

STANDARDS (COMMERCIAL)

ASME-MH1 American Society of Mechanical Engineers (ASME) Pallets, Slip Sheets, and Other Bases For Unit Loads, for construction of pallets.

CONTINUATION SHEET REFERENCE NO. OF DOCUMENT BEING CONTINUED: PAGE 20 OF 67 PAGES

SPE1C1-23-R-0068

SECTION C - SPECIFICATIONS/SOW/SOO/ORD (CONTINUED)

C03 CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (MAR 2023)

SECTION D - PACKAGING AND MARKING

PASSIVE RADIO FREQUENCY IDENTIFICATION

(a) Definitions. As used in this provision --

“Advance shipment notice” means an electronic notification used to list the contents of a…