Servicebody1832270.xls
XLS spreadsheet 29 KB Posted
- Attached to
- DOT Service Body for 183-2270
- Solicitation number
- RFQ - 18P - 11061400000000001271
- Issued by
- Kennebec County, Maine
About this file
This is a specification document for a steel service body component for the State of Maine Department of Transportation (DOT), specification number 183-2270. The requested vehicle is a heavy-duty galvanized steel service body designed for installation on a 2011 GMC Sierra 2500HD pickup truck with specific configurations including a 6.0 V-8 gas engine, single rear wheels, and regular cab. The service body is a fully welded construction measuring 96 inches in length and 78 inches in width, featuring a 40-inch cabinet height with a 56-inch overall cab width. The vehicle is to be picked up at the agency's Augusta location, have the service body installed, and be returned to the facility upon completion.
The service body specification details comprehensive construction requirements including 14-gauge two-sided galvanized steel or galvanneal construction, a 12-gauge smooth plate floor with rhinoliner coating, multiple exterior compartments with specific dimensions on both street and curb sides, stainless steel latches and hinges, FMVSS-compliant lighting, and Caterpillar yellow exterior paint with reflective gray or white interior. Required accessories include a backup alarm and a 7-way RV style trailer connector with integral electric brake controller. The specification mandates all electrical connections be sealed with heat shrink and heavy-duty wire loom with no Scotch-Lok connectors permitted. Installation labor and vehicle transportation are to be included in the bid submission. The document includes sections for bidder contact information, unit cost, total cost, and estimated delivery time, though specific quantities, pricing terms, and award dates are not populated in this specification template.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Solicitation_terms.doc | DOC document | |
| PAYMENT METHOD (2).doc | DOC document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Sheet1
| SPEC# 183-2270 | STEEL SERVICE BODY | ||||||
| GENERAL DESCRIPTION | Heavy duty galvanized steel service body, fully welded construction. All stainless steel latches, hinges, and hardware. | ||||||
| MINIMUM SPECIFICATIONS | |||||||
| APPLICATION | 2011 GMC Sierra 2500HD, (P/U Box Deleted), SRW, Reg.Cab, 2wd, 6.0 V-8 gas, 9300GVW, 133.7" WB, CA 56" | ||||||
| BODY SIZE | Length: 96" Width: 78" Floor Width: 38" Cabinet Height: 40" | ||||||
| BODY SHELL | 14 gauge two-sided galvanized steel or galvanneal. Compartment top and back to be one piece seamless design. Drip rails above all doors. All doors, door openings, drip rails, and other exposed steel edges to be hemmed for strength and safety. Eight mounting points, four per side. Undercoated steel rock guards at rear of wheel wells. Aluminum rock guards at front of body. | ||||||
| FLOOR | 12 gauge smooth plate with 1-3/8" return flange on each side. Cargo tie-downs mounted in each of the 4 corners. Rhinoliner (or equivalent) in complete load area. (floor, cabinets, & headboard), to include the top of the cabinets. | ||||||
| TAILGATE | 12" Slammable tailgate, pickup style release handle in the center, 14 gauge double panel construction, parallel to floor when in the down position | ||||||
| WEATHER STRIPPING | Heavy duty, closed cell automotive type | ||||||
| EXTERIOR COMPARTMENTS CONSTRUCTION | Side compartment back panel overlaps and interlocks with floor flange for compartment weight support. 20 gauge 2 sided galvanized steel double panel exterior doors with 2 stage slam type rotary latches, heavy duty adjustable strikers, theft proof replaceable hinges, keyed alike locks. Single chains or cables on all vertical doors. Double chains or cables on all horizontal doors. Shelves to be 18 gauge galvanized, hemmed, rated for 250lb. capacity, with multiple divider kits. Drains and vents in all compartments. Note-All stainless steel latches, hinges, & hardware!! | ||||||
| EXTERIOR COMPARTMENTS LAYOUT | Street Side & Curb side: Front Compartments= 40"h x 31"w x 20"d with two adjustable shelves per side. Horizontal compartments= 44"w x 20"d with no shelves. Rear Compartments=40"h x 21"w x 20"d with one shelf per side. | ||||||
| LIGHTS | FMVSS lighting package. Quick connect loomed wiring harness. Flush mounted tail and backup lights, clearance lights and reflectors. License plate light with bracket. | ||||||
| PAINT | All steel surfaces galvanized and epoxy primer. Exterior paint to be Aliphatic polyurethane enamel such as Dupont Imron 3.5, Caterpillar yellow, code "423133". Interior color to be reflective gray or white. All undercarriage surfaces to be fully undercoated with petroleum base material. | ||||||
| BUMPER & TRAILER HITCH | 8" steel tread plate step (no recess), Class IV trailer hitched rated for a minimum 6000 lbs weight carrying! | ||||||
| FUEL FILL CONE | Aluminium or stainless steel, marked "Unleaded Fuel Only". | ||||||
| INSTALLATION | Vehicle to be picked up at our location in Augusta, items installed, and vehicle returned to CFM in Augusta. (Please include in bid!!) All electrical connections to be sealed with heat shrink and fully protected with heavy duty wire loom. Absolutely no "Scotch-Lok" style connectors | ||||||
| ACCESSORIES | Back up Alarm, 7 way RV style trailer connector (Integral Electric brake controller equipped from factory). | ||||||
| MAKE | Model | ||||||
| Possible Quantity | Unit Cost | Total Cost | |||||
| 1 | |||||||
| Bidder (Vendor) | Contact Person | Contact's Telephone | |||||
| VENDOR COMMENTS | |||||||
| ESTIMATED TIME FOR DELIVERY: |
Sheet2
Sheet3
File details come from the government source that posted it. Updated .